Button Navigation Problems

Hi, I'm having a frustrating problem when copying/pasting buttons. Its probably a bit unusual but here goes. I'm a composer and I'm creating a showreel for my music and soundtracks, so I needed the dvd to have a page with numerous audio tracks that the viewer could click and listen to. The only way I could find to achieve this was to have duplicate pages linked to each other that each had a different background track. For example, you see a menu with tracks 1 through 10, when you click track 1, nothing appears to happen but you actually go to an identical menu that plays track 1 in the background. My problem is that when i copy and paste the identical buttons from one page to the next, the navigations (up, down, left, right) don't copy. I update these tracks fairly often so its a lot of tedious work every time. Suggestions greatly appreciated.

If you select the items in the menu, then Command C, go to the other menu (make sure to click on it) then Command V it should carry through.
What I would so is set the first menu with proper navigation and color schemes for the menu.
Then duplicate the menu 20 times
On the 19 copies delete all the buttons, then set links in the buttons for the first menu, then copy and paste buttons as above, it saves the navigation
Download this file
Buttons Zip File
I made menu 1, duplicated it 3 times, set the links in menu 1 buttons, removed the other buttons, copied from menu 1 then pasted.
It actually took more time to write that last section than do it so it is pretty quick.
Note that UP/LEFT press takes you backwards and RIGHT/DOWN goes forward (numerically) then cycles from 4 to 1 or 1 to 4 when the end is reached

Similar Messages

Button Navigation & Highlight Problem

I have I believe, a simple button highlight problem. I have a
group of buttons I created on a page and want when button 1 is
clicked it stays highlighted (each button is a MovieClip), and when
another button is clicked the last one clicked gets cleared. All
buttons have this initial AS to start:
this.onRollOver = function(){
this.gotoAndStop("focus"); //button changes colour
this.onRollOut = this.onReleaseOutside = function() {
this.gotoAndStop("no_focus"); //back to original / starting
colour
this.onRelease = function() { //here's where I'm stuck - keep
the button highlighted and 'reset' the last one clicked.
this.gotoAndStop("focus");
this._parent.gotoAndStop("Pic2");
this.onReleaseOutside = this.onRollOut = null;
Any tips on how to make this work?

For anyone able to help, I've change the script on my
buttons: Some buttons still act funny - don't reset or only reset
on rollOver. Any help?
Tjisana
stop();
var num:Number = 3;
//Mouse RollOver function: change colour when mouse passes
over button
this.onRollOver = function() {
if(_global.link != num) {
this.gotoAndStop("focus");
//Mouse or Pointer Rollout & ReleaseOutslide function: go
back to original colour
this.onRollOut = this.onReleaseOutside = function() {
if(_global.link != num) {
this.gotoAndStop("no_focus");
this.onRelease = function() {
if(_global.link != num) {
_global.link=num;
for(var i=1; i<=6; i++) {
this._parent["space" + i].gotoAndStop("1");
this._parent["space" + _global.link].gotoAndStop("1");
this._parent.gotoAndStop("P3"); //change to new picture
this.gotoAndStop("focus"); //keep button highlighted
};

Still having navigation problems and need help with how to debug

Hi,
I've been porting over a servlet project to JSF and I'm still having navigation problems. I thought the problem might have been because the original project used HTML frames and so the "from-view-id" JSP defined the frame/framesets and the specific JSP that does the submit (and so is named in the "from-view-id" is never defined in a "to-view-id" attribute). I've now switched to using an IFRAME, and that resolves that problem. So now the JSP is defined in a "to-view-id" attribute and it includes an named IFRAME that can be used as a target. I press the submit button and I get not the JSP expected butinstead the same JSP displayed inside its own IFRAME.
Here is the code for the submit. I've simplified it as much as possible with a static action (originally it was a call to a method) just to try and get things to work. This is the current version:
<h:commandButton value="View Alias" action="foo" styleClass="select" type="submit" />Here is the navigation rule in faces-config.xml. Again, the problem is that SelectManager get redisplayed in the IFRAME instead of display.jsp.
<navigation-rule>
 <from-view-id>/SelectManager.jsp</from-view-id>
 <navigation-case>
 <from-outcome>foo</from-outcome>
 <to-view-id>/display.jsp</to-view-id>
 </navigation-case>
</navigation-rule>I have also tried it without the "from-outcome-value" which I presume means that the "to-view-id" gets displayed unconditionally and it still fails. Any ideas on how I can debug this? (I'm using GlassFish if that's important to know)
Rob Tanner
Linfield College

Raymond, The real trick is avoid doing technical things when coming down with the flu (I should also add that I'm a JSF newbie). Reading your original message this time I see what you're suggesting and found a conversion error although I don't understand it. Here's the code (including the <h:message/>):
 <h:selectOneMenu value="#{members.dcodes}"
 style="color: #7f0000" id="selector">
 <f:selectItems value="#{members.departmentList}" />
 </h:selectOneMenu>
 <h:message for="selector" style="color:white"/>And here's a snippet of the generated HTML:
<select id="j_id_id26:selector" name="j_id_id26:selector" size="1" style="color: #7f0000">
 <option value="aad" selected="selected">Academic Advising</option>
 <option value="aaf">Academic Affairs</option>
 <option value="adm">Admission</option>
 <option value="up">Upward Bound</option>
</select>If I select "Admission" for example, the error I get is:
Conversion Error setting value 'adm' for 'null Converter'.Since everything is a String value, I don't get the error. Could someone please enlighten me.
Thanks.

Navigation Problem in OBIEE

Hi,
I have a strange navigation problem. I have the navigation setup from the 1st page of my dashboard to go to the second. When I first bring up the first page, and then click , nothing happens. Now if I refresh this page and then click again, I am able to navigate to the second page. I would to hear if anyone has seen similar issue. Any help is appreciated.
Thanks,
Bharat

Still haven't found a solution to this problem.
Even if I remove the form1.setTarget( null or other framename/windowname)
I tried changing to using the onclick="from1.target='mywin';" and also onclick="form1.target='_self'; on the button. Does not work/ have the desired effect of controlling where the page is opened: in same window or in another frame or window.
For some reason navigation also totally breaks, after a search, with a similar sql as in this message, and I get no error when I debug and step through the code.
After doing one search, navigation seems to stop working and only the search.jsp page is the target.
If I do a view first navigation works to new page/servlet output but still not in a new window/frame.
This simple stuff in a normal simle html page, should not be so hard to accive with SJSC perhaps someone of you in the community or the developers at sun can give us insight into this simple problem.
It must be fairly common that one likes to control where a page is opened, in the existing window/page/frame or in a new window/frame.
Anybody else had any problems with navigation not working with similar code ??
If I remove the do_search() call it works, the navigation continues to function, but still have no control of the destination window/frame.
Kind Regards
Roger

RoadMap UI Navigation Problem

I'm facing a navigation problem using the roadmap UI in WD4A.
Let's say we have 5 views. The roadmap view is the default view, the other views will be embedded into a view container UI element on the roadmap view. The roadmap UI has 4 steps, one for each view.
V_ROADMAP
V_STEP_1
V_STEP_2
V_STEP_3
V_STEP_4
Now, I need to add navigation buttons (previous & next) to navigate between the roadmap steps.
My question is where should I placed these navigation buttons? On each view or only on the roadmap view.
Personnaly and it think it would make more sense to place them only on the roadmap view.
My problem using this approach is has follow: When you are on v_roadmap on step 1 (V_STEP_1), you click on Next to go to the next view (V_STEP_2), actually the action is trigger in V_ROADMAP so I am not able to validate user input field or obligatory field in V_STEP_1. I would have to call an action from V_STEP_1 in V_ROADMAP so the event handler method WDDOBEFOREACTION will be called. I don't think it's possible. The problem here, is you can click on next and you can go to the next view without filling the obligatory fields.
If I placed my navigation buttons on each view. The advantage is that before triggering an action, I can validate user input field, obligatory field in the method WDDOBEFOREACTION before going to the next step.
The desadvantage is that I have to recreate them on each of my view.
thanks
Alex

Just to close this thread, I will summarize the different possible options:
Navigation buttons on each view: This is the easiest way to validate obligatory fields but for component reuse it's not good idea to have navigation buttons on individual views.
Navigation buttons on main views: If we placed the navigation buttons on our main view, the validation is kind of painful, before firing an outbound plug from the main view and a corresponding inbound plug on the individual view, we will have to manually verify our obligatory fields from the context of the componenent controller or using cross-component data sharing.
Navigation using GAF (Guided Activity Floorplan): I think this option is the way to go! The problem here is that's very difficult to find documentation on that subject, also, the tools from SP 15 is not as user friendly then the one that's coming in NW EhP1.
Alex

Facing duplicate button press problem.

Hi,
I am a beginner to JSF technology. I am working on a project that uses JSF 1.1 specification. I am facing "*duplicate button press problem*". Most of the links and submit buttons do not respond. With a lot of search I found that this problem was fixed in JSF 1.2.
I want to know whether upgrading to JSF 1.2 will work or not ? Also will it require code changes in existing code or simply upgrade will do?
- Sax

I'm not sure why you are focused on 1.1 vs 1.2 on this issue. For both versions you need the POST-REDIRECT-GET pattern, facilitated by the <redirect/> directive in the navigation rules.

Navigation Problem in Next/Previous Record

Hi,
I have a Master (have 20 fields) and Four its Detail block visible on same screen but each block have its own Canvas and Window. Now master table have 1700 records with its detail tables. So after Query when I press the Next_Record button it will no response some time I have to press it twice or thrice then it will respond and some time on fist click it gives the response.
So I want to navigate through Next Records or Previous Record buttons on single click.??????????
Kindly send me the solution of this problem on urgently basis.
Best Regard,

Hi,
It's very difficult to suggest something by readingyour post. There are many reasones for navigation problem. Validation is one of them. Be sure that validation triggers written on any level are working properly. What code you have written on the buttons that you are using for navigation. In which blocks you have put your buttons. It is recommended that you put all your non-database items in a non-database block. Check this also.......

IOS 6.1.3 WIFI button disable problem on iPhone4S - It is definitely a BUG

Hi Apple Fans
I have a full house of Apple products from iPhone -> iPAD -> iPod -> Mac -> AirPort, and I am suffering from WIFI button disable problem after upgrade to iOS 6.1.3, without any clue after calling Apple Support, factory reset and reload iPhone for more than 10 times. I also try all tips on Apple Support Communicties except put it into a freezer, still no any luck. Apple Support suggests that my iPhone may be factly!
Tonight, I can get my WIFI back in below sequence:
1. Switch to English language from Chinese
2. Turn Cellular Data Option to off
3. Reset Network Setting
After the phone reset, the WIFI row show 'Not Connected', and I can select my home WIFI (Airport Express) without trouble. To prove my finding is workable to all case, can you try the same and update here if it works for you?
Good Luck!
PS: I always believe it is a BUG.

Hi,
I sympathise with you as my iPhone 4s is 7 months old and is also greyed out. I tried everthing except the potentially stupid one of putting the iphone in a freezer! I took the phone back to the vendor who sent it away and repaired it. But alas after a month it is greyed out again. I have again returned to the vendor and he will repair it again. I asked him how and he told me it is a software conflict and he has to spend around 9 hours downloading a patch repair. Apple are aware of this issue and I feel completely let down because they have not posted a fix on the net. Presently I am living and working in Dubai, back in the UK I am sure my iPhone would have been exchanged for a new one. I need my iPhone for my work and cannot afford to just buy a new one so I have been let down and despite for years being a supporter of Apple and their products I shall think twice before investing in any more Apple products.

Standard button image problem

Hi,
I've got a problem when I try to set Image to the button from standard components.. I can set it up, but than I didn't see the image in the browser.
With the button from basic components there is everything working fine, unfortunately I need that component from standard.. any advice?
thx.

Hi,
I've got a problem when I try to set Image to the button from standard
components.. I can set it up, but than I didn't see the image in the browser.
With the button from basic components there is everything working fine,
unfortunately I need that component from standard.. any advice?
thx.Standard button has problems with images due to a JSF issue. To work around the issue, remove leading / from the buttons image property and re-deploy. This should cause the standard button image to display correctly.
Hope it helps,
Lark

Mouse navigations problem with Sun Java 1.5.0_*

Hello gurus,
We need to move from JInitiator to Sun Java Plugin; according to the Forms10g Client Platform Support (http://www.oracle.com/technology/products/forms/htdocs/10gR2/clientsod_forms10gR2.html) one of the certified version for Forms 10.1.2.0.2 of the the Sun Java Plugin is 1.5.0_06 and Internet Explorer 6.0, we have tested also SJPI 1.5.0_09 and we get the same mouse navigation problem reported in the following Oracle Forum threads.
Mouse navigation don't work with Java Plugin.
Mouse navigation don't work with Java Plugin.
Forms 10gR2, Sun Java 1.5.0_06 gives mouse problems
Forms 10gR2, Sun Java 1.5.0_06 gives mouse problems
Does anybody know a solution to this problem?
Any help will be really appreciated.
Regards,
Victor.

You need to use 1.5.0_12 or newer. The client SOD is not up-to-date on this specific point. A lot of navigation problems was fixed in this very release.
The Management team should change this in the client SOD, wonder why they still refer to 1.5.0_06. For Applications, the first 1.5.0 to be certified was _12.
Also make sure, that you are using the latest Patch 3 for 10.1.2 (10.1.2.3). This patch also contains fixes for a lot of these wellknown issues.
Hope this helps,
Jacob

New ARB Issue: Button navigation and Declarative States

<[email protected]il.forums.adobe.com>
Message-ID: <C6277898.7F37%[email protected]>
Thread-Topic: New ARB Issue: Button navigation and Declarative States
Thread-Index: AcnOqlv/oTWkTNjMukqDP18VFO76uA==
Mime-version: 1.0
Content-type: multipart/alternative;
 boundary="B_3324475544_8859892"
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--B_3324475544_8859892
Content-type: text/plain;
 charset="US-ASCII"
Content-transfer-encoding: 7bit
A new ARB issue has been posted to the flex open source site:
http://opensource.adobe.com/wiki/display/flexsdk/buttonnavigationand+decla
rative+states
This issue concerns the new state syntax and what it means to leave a value
of a property implicit in one or more states.
Comments, suggestions, and feedback are welcome.
--B_3324475544_8859892
Content-type: text/html;
 charset="US-ASCII"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>New ARB Issue: Button navigation and Declarative States</TITLE=
>
</HEAD>
<BODY>
 
 
 
A new ARB issue has been posted to the flex open source site: 
 
<a href=3D"http://opensource.adobe.com/wiki/display/flexsdk/button+navigation=
anddeclarative+states">http://opensource.adobe.com/wiki/display/flexsdk/bu=
ttonnavigationanddeclarativestates
This issue concerns the new state syntax and what it means to leave a value= of a property implicit in one or more states.
Comments, suggestions, and feedback are welcome.
B_3324475544_8859892

Ned Murphy wrote:
Select the textfield that is inside the movieclip and in the properties panel you should see a dropdown for selecting the type of textfield. If you select Dynamic and then assign an instance name to the textfield you can use that instance name in your code to assign the text when the file runs. If you were to name the textfield "tField", then the code you would use inside an instance of your movieclip named "mClip1" would be...
mClip1.tField.text = "your text";
So, if I have multiple buttons, using your example, would the code read
mClip1.tField.text = "your text";
mClip1.tField2.text = "your text2";
mClip1.tField3.text = "your text3";
mClip1.tField4.text = "your text4";
And my buttons are built inside movieclips, ie
Main Timeline > aboutButton_mc > aboutText_mc > "about"
 > contactsButton_mc > contactsText_mc > "contacts"
can the code be put at any level, or does it need to reside on the Main Timeline to access all the movie clips' text fields?
Just in case this may be too complex to get into via this forum, if you know of any good tutorials, that would be awesome too!
I tried doing a search, but it's so hard to tell if they might be in AS2, or AS3, and if they would apply to newer versions of Adobe Flash (I have CS5)

ARB Issue Committed: Button navigation and Declarative States

<[email protected]il.forums.adobe.com>
Message-ID: <C62B9EEA.82F3%[email protected]>
Thread-Topic: ARB Issue Committed: Button navigation and Declarative States
Thread-Index: AcnOqlv/oTWkTNjMukqDP18VFO76uACeTE1U
In-Reply-To: <C6277898.7F37%[email protected]>
Mime-version: 1.0
Content-type: multipart/alternative;
 boundary="B_3324878165_1545235"
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--B_3324878165_1545235
Content-type: text/plain;
 charset="US-ASCII"
Content-transfer-encoding: 7bit
the ARB issue at:
http://opensource.adobe.com/wiki/display/flexsdk/buttonnavigationand+declara
tive+states
has been updated with a decision (in short, keep the status quo).
Ely.
--B_3324878165_1545235
Content-type: text/html;
 charset="US-ASCII"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>ARB Issue Committed: Button navigation and Declarative States<=
/TITLE>
</HEAD>
<BODY>
 
 
 
<BLOCKQUOTE><=
SPAN STYLE=3D'font-size:11pt'>the ARB issue at: 
 
<a href=3D"http://opensource.adobe.com/wiki/display/flexsdk/button+navigation=
anddeclarative+states">http://opensource.adobe.com/wiki/display/flexsdk/bu=
ttonnavigationanddeclarativestates
has been updated with a decision (in short, keep the status quo).
Ely.
B_3324878165_1545235

graf_ix_guru wrote:
>
> Hey everyone I am new, and really could use some help.
> I have created button symbols in Fireworks with Pop-Up
Menus. As of right now
> I have 4 states. The up, over, down and over while down.
Everything is working
> great except when the user clicks on the navigation
button they get taken to
> the top of the page.
On click should open a new page, yes? So it won't matter.
Linda Rathgeber [PVII] **Adobe Community Expert-Fireworks**
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm

Installing ios8.2 does not resolve Google map navigation problem or gps tracking!

Installing ios 8.2 does not resolve Google map navigation problem.

I have tried to install both of them lots of times but in each case I receive the same in my XE.bat file:
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
Have checked OS 1387 error at Microsoft Support and as possible cause of the problem they give as follows:
This issue can occur if the environment has a disjointed namespace (i.e. the domain has different NetBIOS and DNS names). For example, assume that the domain has a NetBIOS name of "domain.com" and a DNS name of "domain-old.com." When users are added in the Windows UI, they are displayed in the format of domain\ComputerName. However, you notice in the error log that there was an attempt to add a computer account in the format of domain-old\ComputerName. (System Center 2012 R2 Data Protection Manager install fails and generates ID: 4323: "A member could not be added")
Tried to find out my DNS name, but it is impossible because I don't have any domain installed and my machine is not connected to it. Some other blog (Install Oracle 11gR2 on Windows) advices to work with adding my computer account to some non-real windows domain (just for the purpose of resolving the network) as well and reinstall the database then. If I undestand it right I need minimum 2 machines for this. But I own just one, where the server is based and thought that is enough to run the database... no idea ..

TS3274 If my iPad home button got problem?

If my iPad home button have problem but my iPad still under warranty can i use the warranty to take service for my iPad?

Yes the home button problem would be covered by the warranty as long as you didn't do something accidentally to cause the home button to fail. If it is a hardware failure - it will be covered under the warranty.
Is the home button no longer working? Have you tried to calibrate the home button?
Calibrate the home button
1. Open a stock iOS app, such as Contacts
2. Press & hold the sleep/wake button at the top of your device until the red slider control appears.
3. Immediately release the sleep/wake button and press & hold the home button. Hold until the red slider disappears.

IPhone 5 on off button having problem

my iPhone 5 on off button having problem which sometimes i have to press several times, and sometimes i have to press it hard. Did anyone having the same problem here? beacause i just use for 5 months

Take a Visit to an Apple Store or AASP (Authorized Apple Service Provider) and have the Device evaluated...
Be sure to make an appointment first...

Button Navigation Problems

Similar Messages

Maybe you are looking for