BW Upgrade from 3.5 to version 7 - RSRV check fails in conversion exists

Hi All,
We are in the process of doing preupgrade checks for version 3.5 and for infoobject 0MATL_GROUP (material group) RSRV checks fails and throughing conversion exit issue for some SID's ,
Error Message:
Check values of characteristic 0MATL_GROUP for conversion exit
There are 41 values with the wrong internal format in the SID table
The first 10 errors are:
Value in SID table 4350/ correct value 000004350/ SID in SID table 2732
Value in SID table 10000000/ correct value 010000000/ SID in SID table 2716
Value in SID table 12000000/ correct value 012000000/ SID in SID table 2717
etc...
I just want to check do we need to fix this error before doing the actual basis upgrade 7.0 tasks orelse is it OK to do upgrade without fixing this error .
Pls advice is there is any way to fix this issue in system without deleting the above SID's in the system.
Is this error will create major issues afterupgrade to 7 without fixing this SID issues in 3.5 - Pls adivce us.
With regards,
Hari

Hi Hari,
From the error message it seems that you had data loaded to 0MATL_GROUP before the EXIT (I guess it is an ALPHA exit)
was switched on. Now the system find values that are not ALPHA converted with the RSRV check. You should correct this
problem before doing the upgrade. It should be possible to do the ALPHA conversion using the transaction RSMDCNVEXIT.
The reason for doing the ALPHA conversion before the upgrade is that transaction RSMDCNVEXIT is no longer available in BI
7.0, Since some objects of the new data flow in BI 7.0 ( for example BIA) are not covered by RSMDCNVEXIT it has been set to obsolete.
Customers cannot use transaction RSMDCNVEXIT anymore in release BI 7.0.
Best Regards,
Des.

Similar Messages

I need to upgrade from my present operating version of Mac OS X version 10.6.8 to the Snoe Leopard version which I am unable to find the app for. Is this version still offered as an upgrade?

Hello,
I need to upgrade from my present operating version Mac OS X , Version 10.6.8 to the Snow Leopard. However, I am unable to locate this app. Is it still available? Any help would be greatly appreciated.
John

Prior to upgrading to Maverick, you must FIRST make sure your iMac meets all of its system requirements.

How do I upgrade from OS X processor version 10.5.8 to 10.6 or later. Is it worth the upgrade?

how do I upgrade from OS X processor version 10.5.8 to 10.6 or later? Is it worth the upgrade?

I have 5.8 on iMac, but it is not server version, it is a usual OS install. I would say, that the only thing there worth upgrading is adding more memory. You should also keep upgrading Firefox, OpenOffice etc. for comfortable work and avoid memory and resource-hungry or buggy applications (like Safari). I have recently used iMovie to work with video, and I never had problems with image editing there. I can compare to 6.8 on my MacBook - I cannot say there is something I missing on this iMac 5.8 which is present on 6.8.
In general, I am an old mac user, and I had experiences where OS upgrade speed up things, like going from 10.2 to 10.3, but I still recommend to make sure that you will get rid of the bugs while keeping functionality - notoriouse examples are Photoshop 7 that stopped working on new systems, Gimpshop (and underling gimp 2, though some cured it) and even some Finder features.

How do I upgrade from Mac OS X version 10.6.8 to version 10.7.4?

How do I upgrade from Mac OS X version 10.6.8 to version 10.7.4?

Choose About this Mac from the Apple menu, click on More Info, and check the model identifier against the following, which are the earliest Macs of each type that can run Mountain Lion:
iMac7,1
MacBook5,1
MacBookPro3,1
MacBookAir2,1
Macmini3,1
MacPro3,1
Xserve3,1
If your system's compatible, buy it from the Mac App Store. A computer incapable of running Mountain Lion which has a Core 2 Duo(not Core Duo) or better CPU and at least 2GB of RAM can run Lion 10.7, which is available by phoning the online Apple Store and ordering a download code for it.
(84155)

How to upgrade from trial connect 9 version with elearning features?

Please advise how i upgrade from my current trial version of Connect 9 to the full version with elearning features.
I see that the public pricing is without the elearning features, so for me this is no good as i need to host courses. The email address of [email protected] is invalid and bounces back and the phone line helpers are unable to provide information to help.
I cannot find costings or online download options anywhere
Please help as a matter of urgency
Thanks

Contact me off-forum and I'll get you all the info you need.
Jorma Jennings
jorma[at]realeyesconnect.com
Not sure why the adobe email bounces, but they probably can't get you anything more than a contact for a reseller anyhow.

Upgrading from 7.5 to version 8: Web and Email Collaboration problem

Hi All;
To be able to upgrade from 7.5 to version 8.x then the web and email collaboration should be removed and this is the hard thing !
To go through all the web collaboration objects and remove it one after one is something not possible, special when I am trying to remove for example an agent who is belonging to the skill group and it gives us: you do not have a permission !!
So I decided to do a clean at the database level (specially that the problem appears when running EDMT), I need a help to know the following to be able to do this cleaning:
1) Should I do this in the side_A database or on the AWDB?
2) If I removed the Application Instance that is related to the Collaboration, could this resolve the problem to do the upgrade from version 7.5 to 8.x? Or I have to delete all the values related to the Collaboration (for example, the media class, the used skill group and the used agents, ... etc)?
Looking to a help PLZ.
Regards
Bilal

Hi All;
To be able to upgrade from 7.5 to version 8.x then the web and email collaboration should be removed and this is the hard thing !
To go through all the web collaboration objects and remove it one after one is something not possible, special when I am trying to remove for example an agent who is belonging to the skill group and it gives us: you do not have a permission !!
So I decided to do a clean at the database level (specially that the problem appears when running EDMT), I need a help to know the following to be able to do this cleaning:
1) Should I do this in the side_A database or on the AWDB?
2) If I removed the Application Instance that is related to the Collaboration, could this resolve the problem to do the upgrade from version 7.5 to 8.x? Or I have to delete all the values related to the Collaboration (for example, the media class, the used skill group and the used agents, ... etc)?
Looking to a help PLZ.
Regards
Bilal

Essbase Upgrade from 7x to 11x version

Hi All,
I am working on essbase upgrade from 7.1.0 version to 11x version, Just curious if somebody can help me in my basic question
1) I have read many blog suggesting that to upgrade to 7 to 11, we have to follow two step process i.e 7 to 9 and then to 11. Is it true?
2) If i am installation the 11x on completely a new either windows are linux box, can i just the load the data from 7x version cube to 11x cube?

This has been covered many times, if it is a new install then you could use the migration wizard to connect to your existing environment and migrate, you will need to take data separately.
Or you could just create the apps in the version 11 env, export the data and copy the objects from your 7 environment.
Cheers
John
http://john-goodwin.blogspot.com/

Upgrade from 10.6.7 to 10.6.8 failed on MacBook Pro

Sometime in the last 24 hours my wife's MacBook Pro (which she bought in December 2010) went through the automatic upgrades for (1) the Mac OS X Update to 10.6.8 and (2) Java for Mac OS X 10.6 update 5. When she tried to boot up her machine this morning she got this grey screen error message:
panic(cpi 0 caller 0x2ab7a2): "Version mis-match between Kernel and CPU PM"@/SourceCache/xnu/xnu-1504.9.37/osfmk/i386/pmCPI.c:707
It was impossible to enter her computer in safe mode. A disk check indicated that there were no disk problems.
Googling "0x2ab7a2" came up with a couple of older references to the error occuring when upgrading Hackintosh computers, definitely not my wife's situation. I couldn't find anything that related this error to a straight OS upgrade to a MacBook Pro running Snow Leopard. (I did note some references to sleepenabler.kext in the discussions regarding the occurrence of this error in other contexts, but this file was not present on my wife's computer and I have no idea what it is.)
By absolute luck she had just backed up her machine for the first time this past Wednesday with a new time capsule we had bought to share. I booted her MacBook Pro off the install disk and then did a restore using the most recent backup of the operating system that Time Machine had stored on the Time Capsule (very nifty).
*** AS NEAR AS WE CAN TELL, THIS FIXED THE PROBLEM. ***
That said, it was a very tense afternoon (especially sinc Mac support was shut down for the holiday). I would very much like to know if any other folks upgrading to 10.6.8 have received this same error message. I would also be curious if Apple's technicians have any theories regarding what caused this file corruption on my wife's computer.
I am not sure if this is relevant, but I should note that when my wife's employer installed Apple Remote Desktop on her MacBook Pro, they also installed a current verson of Sophos Antivirus for the Mac. Is there any chance that the antivirus program somehow or other mangled the OS update?
Thanks for any and all feedback.

You should never install OS updates or upgrades with anti-virus software enabled as it will definitely corrupt the process.
That said I would disable the anti-virus software before attempting the updates a second time. Also, be sure you repair the hard drive and permissions before updating. My suggestions for less troublesome updates or upgrades:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger and later.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. Download and install update(s) if updating:
Use Software Update, or
Download standalone updater(s).
E. To upgrade from an earlier major version:
Purchase the requisite installer package (Snow Leopard for example.)
Boot from the installer DVD.
Choose the install option:
None required for Snow Leopard.
Archive and Install for versions prior to Snow Leopard.

After MAR upgrade from 4.0 - 7.0 login to ars_db fails

Hi,
After MAR upgrade from 4.0 -> 7.0 login to ars_db fails with the message "inconsistent database structure". For me it is a bit weired to do the ars_db upgrade to 7.0 SP4 and then start the transport agent which is still in the 4.0 level but this is the way it is described in the upgrade guide in order to delete Blobs after MAR upgrade.
Is the guide here inconsistent? Don't we have to upgrade the tools and services first before deleting Blobs?
Did anyone experience similar issues?
Regards
Whity

Hello Whity
After upgrading the MAR,To upgrade the MRS Tools and Services follow the steps below:
1. Stop and uninstall the 4.0 Transport Agent Service. Use the Transport Installer to
uninstall the above services.
2. If you are not able to uninstall the TA, uninstall the service manually using the following command sc delete [service name]
.Also check that there are no entry for that service at the registry location HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
3. On your local copy of the Upgrade DVD open the folder Mobile_Client_Upgrade\UpgradePurposeOnly . If you upgrade from CRM 4.0 you have to run SETUP.exe. If you upgrade from a higher release you have to run UPGRADE.exe
4. Install the Transport Service again after MRS tools and services are upgraded to 7.0 SP 04.
In your case, TA was not uninstalled pripr to the MRS tools and servcies upgrade.Hence you still see 4.0 TA. Please follow the above steps to solve the issue.
Please refer to the section 5.2.7 section of the upgrade guide document for more information.
Regards
shankar

We have to upgrade from SAP 4.0 version to ECC6.0(only EDI/IDOC effects)

Hi All,
We have to upgrde a system from SAP 4.0 version to ERP6.0, is there any difference in EDI and IDOC
tables or their types in ERP6.0 from the 4.0 version, which we have to also consider or not.
but if differences are there but SAP itself is taking care for that, then how the sap is taking care of that ..?
Regards,
Rohit Sharma
Edited by: rohit sharma on Jun 19, 2008 1:26 PM

I´m not sure what you mean by "old table to new table".
The general table structure is not changed, VBAK + VBAP are still there. They may have been extended by additional fields, depending on how your system is implemented. It´s also possible, that if you activate any business function after the upgrade, that tables will get appends.
The old IDOC structures working before the upgrade should work after the upgrade the same way since those structures are not touched.
Markus

Lightroom: upgrade from trial to full version, how to enter license key?

I installed Lightroom from Creative Cloud (CC) trial on Windows 7 Pro, 64-bit. The version is LR 5.6. I do not want CC, so I purchased the full version of LR on DVD. I was going to reinstall LR from the DVD, but see that it is only version 5.2. I have already done a fair amount of work with the trial LR 5.6 and am worried about losing the catalog that I have created.
So I thought I could apply the full version license key to the trial install, but there is no place to do that within LR. When I bring up the CC master application it shows that I have 5 days left with LR, but still has no way to apply a license key.
I had a very long and frustrating chat session with tech support. In the end I was advised to uninstall the trial, then install the full version. I might be able to download LR 5.6 full and simply install that.
So let me summarize my questions:
Is there any way to apply the license key for standalone full version of LR to the trial version that was installed using CC?
If I uninstall trial version, will I be able to install LR 5.6 download and apply license key?
If I cannot install from download and instead have to install from purchased DVD, will version 5.2 be able to import the existing catalog? Will subsequent upgrade(s) to 5.6 go smoothly?
What about the catalog? Will the existing catalog simply be found during a new installation? Or do I have to manually import?
I've found the community help in the LR forum to be very good - and that is why I am abandoning ACDSee after many years Thank you all for your help.

You should just uninstall what you have installed for LR 5.x, now, then download and install the LR 5.6 update from the Adobe Updates page, and enter your standalone serial number, and things should pick up where you left off.
You might want to go into LR’s preferences (if LR is still opening for you) and see where the catalog (.lrcat) file actually resides on your computer in case you have a problem and have to double-click on that .lrcat file to open your catalog, but my experience is that nothing will seem different after you’ve installed the new version other than the version number will be newer. The preferences, catalog, and pictures are somewhere different than where the program is installed so uninstalling and reinstalling shouldn’t affect any of it.
LR 5.6 update is here: http://www.adobe.com/downloads/updates/
FYI, the CC-LR is licensed by logging into CC, the standalone version is licensed by entering a serial number. That is why you have to uninstall the CC_licensed version and install the non-CC-licensed version.
It also probably wouldn’t mess anything up to install LR 5.2 from the DVD, but then you’d have to turn around and immediately download the LR 5.6 update, anyway, and it would waste time, so why not start with the latest update. The update is a fully function program, not a patch to an existing program. It’ll either find your existing licensing information if you’ve already entered the serial number or ask for a serial number if it doesn’t find anything—which sounds like your situation.

Upgrading from educational to commercial versions?

I currently have Adobe Creative Suite 1.0 Education version that I purchased in 2003 when I was still a student. I am upgrading to a new iMac and want to upgrade my CS software to the Intel-friendly CS4 Design Premium. Adobe is running a great deal on upgrades (CS3 upgrade rate from any version of Creative Suite, not just CS3) that I would like to take advantage of, but no one at the Apple store seems to know if I can upgrade from an Educational suite to a Commercial suite at these rates. I am no longer a student, and would be using the CS software to create for-profit pieces.
So, to boil it down, will the $599 upgrade work for Educational-to-Commercial, or do I have to start from scratch with the $1,800 suite? That's a big difference in price, and I'd hate to buy the upgrade only to find out it doesn't work and I have to shell out for the whole shebang.
Thanks for your help!

Be sure you buy the correct upgrade package CS to CS4 and do it before April 31 which is when tiered pricing kicks in and it will cost $200 more.
Also CS is the last upgradable version Adobe only goes 3 versions back as soon as CS5 is released CS will no longer be eligible.

I just purchased the upgrade from trial to full version. It does not work. It asks for my orginal serial key and when I paste in the trial key it says invalid??

Downloaded trial and then purchased the activate the full version option. The activation keys don't work. It wants an 'original' key. When I use the trial key it rejects it as invalid! Have I just been robbed of 75 quid?

lanceblack,
You know, I had seen your similar post in other forum with same issue. This itself is confusing for other participants including myself to keep track of forum discussion regarding same issue.
It would be nice if you keep your issue in proper forum in one place, less confusion for others.
Corky02 said better than I did yesterday. I am not quite sure why or what impresssion that you'd easily upgrade from try-out app into full-license. For many people are aware that what it means or what does this having to do with upgrading qualification with any applications. Why did you think you would get to upgrade that easily from trail try out app to licensed one?
I don't think the Apple's ads are misleading. I just think you got yourself confused. Sorry I can't help you. IF I am Apple employee, I would love to help you and get this resolved for you. I am just one of those participants helping others.
Once again, I am sorry that you get your view all wrong and lead into thinking that you are entitled to do so. But you need to understand that once if you had purchased a full license app from try-out app. Most people know what does that mean with try out app for the first time. And most people know that if they wish to purchase an application, this means purchasing a boxed (or electronic downloaded file) from Apple retail store (or online store). Plus, new venue at Apple offering Mac App store. I think that is a little confusion for some people who are not familiar with the difference.
I do believe that if you purchase from Mac App store, it doesn't require to put in license serial number. I think it is a different approach for some reason. I had bought some other Mac apps (not Aperture) from Mac App store few times. I haven't purchased Aperture updated version straight from Mac App store online. I bought mine from Apple retail store in Canada in person.
I still don't understand why you still think Apple is misleading you all the way. I don't think it is. In case if you haven't notice... there is way for you to get in touch with Apple called Apple Support Express Lane. Give it a try.

When upgrade from an older firefox version where an existing plugin was ready enabled, would this plugin become "ask to activate" after upgrade to v26?

What's the user experience if he/she upgrade from an older version of Firefox, where an existing plugin was ready enabled, would this plugin become "ask to activate" after the user upgrade to Firefox v26?

If plugins.click_to_play was set to true, it might. I am finding that click-to-play is not working very well with Firefox. Whether the plugins are set to Always Activate or Ask to Activate, it allows everything from a website to load once it is allowed from the icon in the address bar. I also have the extension Click to play per-element, and that seems to make no difference.

ZSearch Help: will it remain during upgradation from ECC6 to higher version

Hi,
During upgarde from ECC6 to higher versions, will zserach help be moved to higher version automatically or will it be removed and I have to create ZSearch Help again in the higher version.
What about the ZTable, will it be there in higher version or I need to create it again in the higher version.
Thanks,
Priyanka.

Hello Priyanka
Upgrading your SAP system will <b>not affect</b> your Z-objects <b>directly</b>.
However, if your Z-objects reference (i.e. use) SAP standard objects that are changed (or, rarely, are deleted) during upgrading then you may have to adjust your Z-objects. Therefore, keep your (automatic) test scripts available (e.g. eCATT) and run them immediately after the upgrade has been finished.
Regards
Uwe

BW Upgrade from 3.5 to version 7 - RSRV check fails in conversion exists

Similar Messages

Maybe you are looking for