By runnning a new report bex shows the workbook saved / BI 7.0

Hi Experts,
i created a workbook with differents sheets and it properly working.
But when i runned another report which is not related to the query used to created the workbook i still have the structure of the Workbook plus the query result.
Could you please help me on that way to solve the problem?
Many thanks in Advance
Gilo

In the workbook settings, check to see if the 'use global workbook settings' is checked.

Similar Messages

I cannot find imported mail boxes. if i try to setup a new mailbox, it shows the existence of the mailboxes that i am looking for in the location drop down menu. where would they be located?

i cannot find imported mailboxes. if i try to setup a new mailbox, it shows the existence of the mailboxes under location/on my mac. they do not show up in the mailbox list. where would they be located so that i can retrieve them?

Did you quite Mail and relaunch?
Your imported mail is stored in a new mailbox called “Import.” To reorganize imported messages, create new mailboxes and drag folders and messages from the Import mailbox to other mailboxes. When you’re done, you can delete the Import mailbox.
If you don’t see your mailboxes in Mail, choose View > Show Mailbox List; empty mailboxes aren’t imported.

How to run the report and show the output in excel file

salam
how to run the report and show the output in excel file,
how to run the report and print the o/p via printer
how to run the report and send the o/p via mail
thank u all

Hi,
There are Parameters DESTTYPE, DESFORMAT and DESNAME. You can set these parameters to get as you want.
1) Output in Excel File
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'FILE');
     ADD_PARAMETER(PL_ID, 'DESFORMAT', TEXT_PARAMETER, 'DELIMITED');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<file_name>.XLS');2) output to printer
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'PRINTER');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<printer_name>');3) Email - Have to configure SMTP and all. ( i didn't checked it)
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'MAIL');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<email_id>');Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

A report which shows the purchase order MM and the linked vendor invoice

Hi All,
I wonder if ther's a SAP standard report which shows the purchase order MM and the linked vendor invoice (the FI document) with the Net due date.
Could anyone help me?
Thanks
G.Rossi

Hi,
ME80FN with PO History View
ME2N with Scope of List "ALLES"

A report which shows the vendor invoice and its purchase order MM

Hi All,
I wonder if ther's a SAP standard report which shows the vendor invoice (the FI document) and its purchase order MM.
Could anyone help me?
Thanks
G.Rossi
Edited by: Lakshmipathi on Aug 2, 2011 2:24 PM
Thread Locked - Reason Cross Posted

Dear,
you can use FBL1N,
From there you can view following things:
1. Vendor Invoice = Reference
2. Document type = KR and RE for Invoices
3. Po Number
4. Amount
you can enable there many fields as per your requirement.
Hope this helps!!!
Br,Vivek

Report doesnt show the text for employee ids.....

Hi guys,
I am facing the following issue.
We have a report which is fetching data from the infocube.Whenever we check the report we are facing the issue : report doesnt show the text for ~10 employee ids,its showing the key in both key and text columns, its showing both text and key for the remaining employee ids.We checked the master data for employee id and it contains master for the employee ids which are not displayed text in the report.
Can any body help on this.
Regards
Prasad

Hi Prasad,
for your infoobject do you have all three texts available (short, medium and long)? Are all three loaded? You might have the wrong text displayed in your report. Check if you have the short, medium or long texts displayed. Dont forget to check the languages too ....
Kind Regards,
Alex
Edited by: Alexandre Soares on Dec 2, 2008 3:33 PM

Report to show the list of Equipment with Attachment.

Hi Experts,
i have attached a file in Equipment Master IE02. Any report can show the list of equipment with attachments?
Please advise.
Thank You
Best Regards

If you are using IE02, then i think you are using object services - I have never seen a way to view these in an equipment list. You can only view these while looking at the equipment. If you use DMS (tcode CV01N) these will show on IE07 as well as in the notification or work order when you use this equipment.

Hi, We are developing quite a few excel worksheet reports. The reports dont show the cells if contain formulas ( when opened in iPad or ipod ), is there any good solutions .

Hi,
We are developing quite a few excel worksheet reports.
The reports dont show the cells if contain formulas ( when opened in iPad or ipod ),
Is there any good solutions .
Thanks.

There is no version of Excel for iPads. iPads come with something that lets you view the contents of Excel files but it implements only the common easy features and there are (literally) hundreds of things you can do in Excel that it doesn't know how to show on the screen, including some functions.
If you intend to work with spreadsheets on an iPad I suggest you buy Numbers for iPad
http://www.apple.com/apps/iwork/numbers/
which understands more (but still not 100%) of the things that Excel does. It is so cheap that you can probably afford to buy a copy just to see whether it does what you want.
If you are doing things with spreadsheets and intend to be primarily working on iPads then I suggest you actually use Numbers on a Mac as well, rather than using Excel at all.

SCCM 2012 Report that shows the users with specific software installed

Hi,
Is there a report in SCCM 2012 that shows the users with specific software installed? The report should show username, machine name and the software name. I am looking for a report that shows the users with the following softwares installed:
1. Adobe(all versions)
2. Photoshop(all versions)
3. MS Project(all versions)
4. MS Vision(all versions)
Regards, Lorin Davis

Take a look at the Asset Intelligence reports in the software section. You may get a list of computers with a product installed, and you might have to use that list to find the primary users based on user device affinity.

Can we create a report painter report which shows the details of CC/CE/IO?

Hi,
I am trying to create a report painter report which shows the details of cost elements,cost centers and internal orders in a single section.I am able to create reports with 2 characteristics (like CC/CE or IO/CE etc.) but not with 3 characteristics (CE/CC/IO) which is my case.I am trying to get data something like below.Is this even possible using report painter?I will appreciate if any one could suggest how to do this.
CE          CC                        IO                        Amt
600000 8190001100           1100001                $1000
                                          1100002                $2000
                                          1100003                $3000
                                                                      $4000
620001 8190001101           1100004                $6000
                                          1200001                $2500
. . . . . . . .and so on
Thanks,
Saurabh.

>
But when i am using the same synonym in crystal report design, my report is working fine.. but the same synonym is available as invalid in database..
>
What does 'my report is working fine' mean? Are you saying that if you rerun the query it retrieves fresh data from the database?
What does 'same synonym is available as invalide in database' mean? How are you determining this.
Synonyms can be created for objects that do not yet exist.
create synonym q for table_does_not_exist
select * from user_objects where object_name = 'Q'
SYNONYM_NAME,TABLE_OWNER,TABLE_NAME,DB_LINK
Q,SCOTT,TABLE_DOES_NOT_EXIST,

Delete the reporting results from the workbook

Hi,
How telete the reporting results from the workbook via the BEX menu functionality

That functionality is not available in the Bex 7 Analyzer, just in the Bex 3.x functionality. To delete workbook results, we simply select the rows of data (but NOT the titles) and delete the rows in excel. Then save the workbook.
If you delete the titles you will delete the analysis grid, and you will have to recreate it.
You can also change the variable values, click "Cancel" and the workbook then shows no results for any query related field. However, this includes the navigation panes and text elements, which produces a rather blank looking workbook.

HT4314 I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

I have tried to log into clash of clans on my iPad and it just keeps going to a new game rather than the one saved on my iPhone. I have been using the game centre and same user name and password ?

I have the same problem.. EXACTLY. . When phoning Apple Support they had trouble understanding my problem and couldnt find any type of solution. No one seems to take responsibility for GameCenter issues. The assistant escalated the problem but no one could find an answer. .
The only idea was to set up a new apple id, hence a new GameCenter account. . But that would loose all the itunes data. Anyone got ideas ?

How to set the filter on a report to show the data for the Current Month

Hi all,
I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
Any help would be greatly appreciated!
Thanks,
AA

You need to add a session variable to date fir worked assuming that this is a date field.
To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section.

How to add a column in alv grid report to show the serial no.

i need to add column to show the row no. of the report say as :
1
2
3
this has to be the first column
how to maintain a variable for this and how to use it??
please help

one simple way is in your final itab declare a slno type i field
data : begin of itab occurs 0,
slno type i,
<other fields>
end of itab.
after filling the data in itab.
loop at itab.
itab-slno = sy-tabix.
modify itab.
endloop.
in fieldcatalog also you have to define that slno field as the first column.
but it will change its order if you are sorting the output or filtering the output.
regards
shiba dutta

Budget Report to show the fixed and variable split for Materials

Hello Gurus,
Could you tell me if there is a budget standards report that will show the fixed and variable split for Materials? Example: Labor, Equip., QC and Overheads?
I need it for the correctly rolled-up 'final material number' step. The report that does this now (without fixed and var split) is the Indented BOM Comparison (sret - cost mgmt-product costing - cost mgmt-customized reports - cost estimate comparison - costed multilevel compare rpt - Indented BOM Comparison).
Thanks,
Jefferson

one simple way is in your final itab declare a slno type i field
data : begin of itab occurs 0,
slno type i,
<other fields>
end of itab.
after filling the data in itab.
loop at itab.
itab-slno = sy-tabix.
modify itab.
endloop.
in fieldcatalog also you have to define that slno field as the first column.
but it will change its order if you are sorting the output or filtering the output.
regards
shiba dutta

By runnning a new report bex shows the workbook saved / BI 7.0

Similar Messages

Maybe you are looking for