BY which transaction GR reverse 652E can be posted for outbound delivery?
Hello all
I post GR 653E for return delivery in VL02N, now I want to reverse this GR, where this can be done?
B.R.
Nicole
Hello all
VL09 can be used to reverse GR for return delivery. Thanks.
Now I use BAPI_GOODSMVT_CREATEto post GR of return delivery, I set movement indicator = 'L' GM Code = '05' and all other mandatory fields in bapi paramters, but got a error to say move type 653 can't be used. I checked the BAPI, it check table T158 by trancation code to see if move type is allowed for transaction. I think the transaction code should be VL02N, but in BAPI, it uses transaction MB1C to check table table t158 with movement type 653, then got error.
is it possible to set 653E allowed in MB1C by some configuration?
B.R.
Nicole
Similar Messages
-
No goods issue can be posted for Stock Trasnport Order
Hi,
I am in MB1B transaction, 35 movmt type (BP01 plant) and want to psot the stock to stock in transit to another plant (BP02). STO was created in BP02 plant and Order DS was in BP01 plant.
Now, i am getting error that no goods issue can be posted for Stock Transport Order.Hi,
It is not creating a delivery thru VL10b. What u meant was create delivery and then do PGI. It will put that stock in transit.Isn't it?? But that is not happening.
Also, MIGO doesn't have movement type 351 E.
Please provide further queries.
Regards,
Thomas -
Can not Batch split outbound delivery
Hi All,
I have a 1 SO, when I create outbound delivery, I press batch split but has 1 message appear "Actual delivery quantity for Item 000010 is 0, split is not necessary"
I check in Location, still have more qty (Unrestricted use) than in SO.
How can I create outbound ?Hi,
What is the delivery quantity shown in the delivery document. If the quantity is 0 or empty, then batch split is not possible. The quantity can be 0 only if
1. There is no stock in the plant/storage location
2. The stock requirement in this case is a special stock and there is no special stock reserved for the sales order.
3. There is no material available in multiple batches in plant/storage location. All the materials belong to single batch.
Find out what is ur scenario. Accordingly create stock in the plant/storage location with multiple batches. For ex you can create 100 units of materials with batch 12345 and then another 100 units of same material with batch 6789. If it has to be a reserved stock, then assign the sales order and item to these stocks.
If this is done and if you create the delivery on the confirmed schedule line date, you should be able to split the quantity between various batches.
Hope this helps you -
Which Client Version of OWB can be used for Oracle8i
Hi All,
I have installed Oracle 8i in my system. Iam unable to install higher versions due to system configuration issue.
Which version of OWB client will support Oracle 8i? or Do I need to go for Oracle 9i to connect through OWB 10g client?
Thanks & Regards,
KumarHi Kumar,
OWB10g R1 requires at least 8.1.7.4 Oracle Database,
OWB10g R2 - 9.2.x Oracle Database
Look at these requirements in Installation guide
[OWB10g R1 Installation guide - Database Requirements|http://download.oracle.com/docs/cd/E10926_01/doc/owb.101/b12150/reqs01.htm#CIHBCDIC]
[OWB10g R2 Installation guide - Database Requirements|http://download.oracle.com/docs/cd/B31080_01/doc/install.102/b28224/reqs01.htm#BGEEGJAC]
So your case - OWB10g R1.
This requirement only for database used as target or as database for design repository.
Regards,
Oleg
PS. Please note that Oracle doesn't support OWB10g R1 -
Cancell/reverse goods Issue WA 641 and outbound delivery
Dear All,
i have try to reverse goods issue with mbst, migo and also mb1a but it still can't reverse the material doc created.
Regards,
JennyHi
Ask your FI / MM consultant to do the setting for the same
1.Go to OBYC -T code and select the AUM transaction
2.After selecting the transaction gives PoP up enter the Chart of accounts (check the chart of accounts in OB13 -tcode)
3.then enter the details as below
Valuation modification Valuation class Debit Creditg
0001 maintained in material master G/L account G/L account -
Reverse Picking for Outbound Delivery
Hi all,
As we know that LT0G does not work for HU managed Storage Location. For reversing Picking of HU in WM
Alternative option available: From Outbound dlvry process we have to execute following steps in Sequence in VL02N
Step 1. Select HU & press button Delete HU assignmnet
Step 2. Edit --> Copy Pack Qty as Delivery Qty
Can anyone plz tell me:-
what is the Function module or BAPI for above mentioned step 2
OR
Do anyone have developed code for this?
Many Thanks in Advance for your help
Edited by: Hiren N. Panchal on May 5, 2011 12:25 PM
Edited by: Hiren N. Panchal on May 5, 2011 12:29 PMSee if BADI_HU_PACKING_QTY will work.
-
Versamail - Can someone post for me?
HI All,
I have a palm Tungsten E2 but I deleted the versamail off of it a while back. I now no longer have the install disc.
Best
Felix
[email protected]
Post relates to: Tungsten E2
Message Edited by smkranz on 10-02-2008 05:21 PMYou will have to obtain a replacement disc...your best bet is www.pdaparts.com or www.usedpdaparts.com or www.ebay.com.
Post relates to: Centro (AT&T)
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android -
How to find the Databse field used in which Transaction
Hi,
I have one query about:
How to find the particular field from the Database table, used in which transaction?
Bottomline: I want to find the LIKP- LIFEX field, used in which Transaction. I know it is related to inbound delivery, but i couldn't find it in which transaction it is.
Thanks in advance.
Jai.Hi Jai,
The field is called External ID which equal to LIKP-LIFEX or RV50A-VERUR_LA (structure).
Path:
Goto -> Header -> Administration -> External ID.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
No goods issue can be posted- error in STO
Dear Experts,
I am trying to post GI for an outbound delivery in VL02N.
This delivery was created when I did Goods Issue in MB1B using Mtype : 352 for a Stock Transfer Purchase Order
Kindly note that my Storage Location is WM+HU Managed. I confirmed TO aslo.
While I am trying to do PGI for outbound delivery in VL02N, I am encountered with the error " For item 00010 of purch. order 4500000901, no goods issue can be posted --- Message no. M7152"*
I am using a PO type for Stcok Transfer and also Item Category is U in PO Line
Kindly help me.
Regards,
ShettyHi Shetty,
Can you please review the notes as a possible solution for your issue:
14912 MB1B FM: M7152 No goods issue possible
352735 MIGO for Stock in transfer
Please check following information whether they explain your system
behaviour:
- The document 'UB', with item type 'U', is used just for stock
transfer order within the same company.
- On SD side, the following document types can be used:
NL Replenishment delivery (without billing document)
corresponding dummy Sales order DL/NLN(item cat.)/NN(sch.line
NLCC Cross-company-code replenishment delivery (with bil.document)
corresponding dummy Sales order: DL/NLC(item cat.)/NC(sch.line
- On MM side
UB Stock transport ord., with "U" item category
NB Standard PO, with "blank" item category
641/647 for STO assigned to SD schedule line cat NN
643/645 for cross-company assigned to SD schedule line cat NC
In the standard system, the delivery type NL is used for inter-plant
stock transfer without billing document. For such transfer with
carried out with billing documents, the delivery type NLCC is used.
If you choose 'UB', this means that a stock transfer is to take place
without a billing document. Choose 'NB' if a purchase order involving
delivery and billing document is to be issued.
A combination of delivery type NLCC with purchase order type UB
would not be valid.
In Purchasing,if you create a PO in ME21N where supplying plant and
receiving plant belong to one company code the system will us UB.
If you create a PO where the 2 plants belong to separate company codes
the doc type NB is used.
Best Regards,
Arminda Jack -
How can delayed delivery update be configured for Inbound delivery ?
Hi All,
How can delayed delivery update be configured for Inbound delivery ?
There is setting for Outbound delivery delayed delivery update but how the same functionality be used for Inbound delivery?
Regards
JimmiHello Jimmi,
Unfortunately I must confirm that the Delayed delivery update is only available for outbound deliveries. Please see below note for further details
664316 Tips for the delayed delivery update for TO
I hope this information helps!
Martin -
Unable to reverse PGR for return delivery (RL).
Prerequisites:
WM managed storage location w/o HU and SU
Document flow
1. Sales order
2. ODB
3. TO
4. PGI
5. Invoice
6. Return sales order in reference to invoice from step 5
7. Return delivery RL
8. TO: Materials put away from interim 904 storage type to warehouse storage type
9. PGR
10. VL09: Reversing goods movement (step 9) for RL delivery (step 7)
In step 10 I am getting error:
Message no. L9009: Storage bin PL1 904 8200000192 does not exist (check your entry).
I have made work around:
1. LS01N: Creation storage bin (904/8200000192)
2. VL09: now it is OK
3. LT10: from WH storage type to 904/8200000192
4. Delivery status (Picking) is not refreshed (like in LT0G)
It works but in my opinion it is another scenario for this.
My question is how to reverse PGR for RL return delivery (without work around I described)?
AndrzejHi Csaba,
1. L9005 message
thank you very much for you response. As I wrote, now I have no problems with L9009 message (I was blind not to notice such obvious settings in V_T321 and V_T333)
Before i wrote this message I have double checked this configuration. But I have did not notice bad setting. Now VL09 works OK.
The open problem is that delivery still has picking/WM status not refreshed.
I've made nearly the same settings that you proposed. I am a little bit confused that you wrote:
if I do not enter '1' in RBLVS I get error message L9005
RBLVS is a "RefMvtType WM" and you set it to 656. You probably mean BSLVS - Special stock indic.
I have following settings:
LGNUM;RBLVS;BSLVS;KZBEW;SOBKZ;BSSKZ;LGREF;BWLVS
PL1;658;;L;;;;652
In my case BSLVS='' (but our cases are little bit different)
2. picking/WM status not refreshed
I have made work around with deleting delivery/delivery items.
As we noticed standard SAP system is not set to manage the reversal of return delivery with WM
Thank you for confirming my doubts.
Andrzej -
In which transaction CODE we can maintain system messages.
Hi
In which transaction code we can maintain system messages for sap sd point of view.
For example : in sales order i want warrning message instead of error message .
Thanks,
KPHi,
All the system messages which are pertained to application area "V4(Sales messages (variable messages and EDI messages))" can be handled by using the T.Code "OVAH".
The path for this is:
SPRO>Sales and Distribution>Sales>Sales Documents>Scheduling Agreements with Delivery Schedules-->Define Variable Messages.
All others can be handled by using the T.Code "SE91".
Here Enter the message class and message number.
Regards,
Krishna. -
In which transaction can i find the Order acknowledgement field?
Hi All,
In which transaction Can i get the Order acknowledgement field ? i tried in VL10B and VL10D but i could not get it.
And also tell me what is the field (order acknowledgement) and in which table can i find it?
Thanks in Advance.
PallaviEKES-ERDAT
Tcode - ME92F -
In which transaction can we get User consolidation details
Hi All,
In which transaction can we get User maintenance, change user data, update user data,
Accept suggestion, Change license data, and update license data details.....
And in which table or tcode we get the SAP license details...
Thanks
RamHi,
Chk the following tcodes.......
ADS2KIP_PROF
BORC1
BIBS
license----
J1ILIC01
J1ILIC02
J1ILIC03
J1ILIC04
J1ILIC05
LICENSE_ADMIN
Regards,
Deeba -
I am ABAP consultant...in which transaction can we find Service order field
HI...
i am ABAP consultant...in which transaction can we find Service order field...
plz let me know in which transaction we can c service order no: and contract no: and if possible tell me the table relations also...
In which transaction ,can we calculate external, internal labor and material cost for a service.... i
i have gone thru iw32, iw 33,va42,va43.
Thanks
Madhavi.Dear Madhavi,
the service orders can be linked to the sales order in Make-To-Order (assembly) and in Repair-Order process. These processes are absolutely different from the SD point of view, but here some general points:
The button "Service Order" can be observed in the transaction VA02 or VA03, if you go to the sales order, then mark the item and go to the schedule line screen. Under the schedule lines you can see three buttons. The first button from the right side should be "Service Order" if the service order is linked directly to the sales order.
The interface between Sd and CS is the function module CO_61_ORDER_EDIT
It is in the case you want to debug.
On the database, please check the field VBEP-AUFNR for the corresponding sales order and sales order item.
I hope, this start info will help you a little bit further.
Kind regards,
Akmal Vakhidov
Development Support SD, SAP, Walldorf/Germany
Maybe you are looking for
-
Regarding paperlayout in reports.
hi , how to move and resize the objects in paperlayout in reports.
-
Major performance problem in weblogic jdbc
I ran a test which selected ~1000 rows from an oracle database table. The code ran in 4 seconds when I used the Oracle driver directly: Class.forName("oracle.jdbc.driver.OracleDriver"); Connection connection = DriverManager.getConnection(URL, "XXX",
-
IPhoto won't import photos from Digital SLR after Yosemite upgrade
Has anyone else had problems with connecting usb devices and importing photos since the Yosemite update? iPhoto "sees" the camera, but it doesn't show on the desktop and never preview or loads the content of the camera in iPhoto. • MacBook Pro 13", m
-
Urgent!Seeking a firmware for StorageTek SL24 Tape Autoloader !
Who can help me to download the latest firmware for StorageTek SL24 Tape Autoloader and then sent to my mailbox!Grateful ! E-mail address: <removed by moderator> thank you ! Edited by: ZB Oracle on 2012-12-27 下午11:18 Edited by: rukbat on Dec 28, 2012
-
Photo resolution & movies?!
So, I'm confused. I can create a very nice page, but there are a couple things that I can't figure out: 1. Photo resolution. My photos seem to automatically downsample (the large version) to 800x600. That's great if I want them to, but what if I don'