C7, Audio is getting increased automatically

Hi,
Am using Nokia C7, Right from the day one i have configured EMAIL (official and personal )account in Mobile,  Audio is getting increased automatically in my handset while am talking. In the receiving end, people are not able to listen my voice.
It went to NOKIA care 5 times and finally they REPLACED my handset with NEW ONE. Still i faced the same problem.
Only thing, what i did was, i have not configured my Mail account. Afterwards it worked properly.
Today again old story. Audit is getting increased automatically in handset and receving end people are not able to hear my voice properly. They are facing difficult time in receving my call.
I have the latest firmware in my mobile. 012.004.00.01
IS THERE ANY FIX FOR THIS SOLUTION. IT MADE ME FRUSTRATED LIKE ANYTHING.
Any Solution will be most welcome.  

Hi , Thanks for your reply once again.
But this problem is really annoying. I have even restored factory settings, after few hours, it started behaving as i told. I managed to give some air movement and tried, still same result.
Am just wondering anybody have faced this problem. Bcoz, this is happening in the replacement C7 phone also provided by nokia.
Once again,MY PROBLEM IS "MY MOBILE SPEAKER AUDIO GOT INCREASED, SUDDENLY AM ABLE TO RECEIVE THE OUTPUT OF MY PHONE THROUGH EXTERNAL BACK SIDE NOKIA C7 SPEAKER.
DURING THAT TIME, PEOPLE FROM OTHER END ARE HAVING TOUGH TIME IN RECEIVING MY VOICE. MY VOICE IS EITHER FEEBLE OR AUDIO LEVEL IS GETTING VARIED.
Any solution there please

Similar Messages

  • Audio input gain increases automatically

    I use both skype and google voice (via gmail) for VOIP calls. In both cases, regardless of the client settings (there aren't many for google voice), the system audio input will increase on it's own over the course of a call.
    I've had this issue for years and i've never seen an actual resolution. Stumpped.

    May have found the answer here:
    http://productforums.google.com/forum/#!msg/chat/YAw2z4xBdyM/a5QmWADpxEEJ
    Plist files in OSX can be of 3 different formats:
    - Binary (just like the one used by com.google.GoogleTalkPluginD.plist
    - XML
    - JSON
    Don't bother editing the binary file (by performing guesstimates, editing with an hexa editor etc); it won't work.
    Instead, perform the following:
    1 - Make a copy of the file to your desktop: cp ~/Library/Preferences/com.google.GoogleTalkPluginD.plist ~/Desktop/
    2 - Convert the Binary Plist to an XML Plist: plutil -convert ~/Desktop/xml1 com.google.GoogleTalkPluginD.plist
    3 - Edit the file with an editor (Aquamacs, TextEdit) and set the Audio Flags value to 1
    4 - Convert the file back to Binary: plutil -convert binary1 ~/Desktop/com.google.GoogleTalkPluginD.plist
    5 - Copy the file back to the Preferences directory: cp ~/Desktop/com.google.GoogleTalkPluginD.plist ~/Library/Preferences/
    6 - REBOOT (closing and reopening the browser won't work as the plugin runs on the background. We "could" kill the process to have it restarted, but we'll leave it simple and reboot the machine).
    That's all it takes. Now feel free to set your mic volume to the value you desire and it will STAY at that level while using Google Talk (it won't auto adjust based on background noise).

  • My volume key not working volume increase automatically, how to mute all audio

    my volume key not working, volume increase automatically if i go to audio settings i can adjust, but  again volume increase automatically , how to mute all audio

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comeback again?
    If this does not boring back a working volume control, and to rule out a software issue, set it up as new device, explained here:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    If still no luck, you'll have to get it checked by visiting an Authorized Apple Service Provider or Apple Store next to your place.
    iPhone - Contact Support - Apple Support

  • Why are multiple audio tracks causing one of the track levels to increase automatically when the other doesn't have an audio file in it?

    So I'm editing an interview and during subtitle sequences in the interview where there is no audio in the interview audio track, the levels automatically rise in the background music track.  Here's an illustration of my problem...
    http://i58.tinypic.com/2rh3atf.jpg
    I also troubleshooted by clicking the Solo button on the background music track and the music plays at the elevated level the whole way through when it's set to be the only track to play.  So for some reason, the interview audio track (when it's playing sound) is causing the background music track to decrease in level.  I get the same thing on exports.  Why is Premiere messing with my levels automatically?  No phone or chat support so I'm left asking the forums, thanks for the great customer service Adobe.

    Hi Richard,
    Appreciate you taking the time to help out.  There are absolutely no effects whatsoever on the audio or video tracks.
    Ryan

  • MB990 and SL - Fan speed is not increasing automatically

    Hi Guys,
    Two days ago I changed my macbook's hard drive to a bigger one and did a fresh install of Snow Leopard.
    As soon as I installed the SL I noticed my computer was running hotter than the previous installation. Without doing anything, my macbook is reaching 75C (167F).. I have already checked the activity monitor and no process is using the CPU. Now I realized that the fan speed is not increasing automatically, it is always fixed at 2000rpm even if the temperature reaches 72C.. I have already tried a SMC reset but the problem persists..
    Does anyone know a solution for this? The problem is the fan speed that is not increasing..
    I'm having to use smcFanControl to control de fan speed manually. Before the fresh install I was using Snow Leopard updated from the Leopard and I was not facing this problem.
    Thanks a lot!

    Hi there... i have the same problem. my temperature gets up to 75C with just one window open in safari or google chrome. I have downloaded smc Fancontrol but ...its not enough. have u solved this problem yet? i'm going in to the Genius Bar tomorrow to see if they can help.

  • User Connections getting increase in Oracle 10g database

    Hi All,
    we have a java application setup in Websphere 6.0 server with Oracle 10g as a back end database.
    Our application server is load balanced by two seperate server.
    We found that there are more number of inactive connections getting established to database from application server.
    Those connections keep on increasing automatically though we closed all the session created through application.
    Is there any specific reason behind this. Currently we are killing those sessions manually.
    Kindly help me in resolving this issue.
    Thanks in advance.
    Regards
    Aruna

    The main reason for this is products like Websphere are stateless, and establish a connection for every statement, execute the statement and close the connection.
    Refrain from setting up connection pooling, either in Websphere or at the database site, and you will keep seeing this.
    As such it is not a database problem. It is a problem of developers who don't know connection pooling.
    Sybrand Bakker
    Senior Oracle DBA
    Experts: those who did read documentation.

  • On my windows 8.1 pc (i5 processor with 8GB ram) I can't get the automatic update voor CS4 master collection. I removed my panda antivirus and still can't automatically update. somebody any suggestion?

    on my windows 8.1 pc (i5 processor with 8GB ram) I can't get the automatic update voor CS4 master collection. I removed my panda antivirus and still can't automatically update. somebody any suggestion?

    thanks for your reply.
    in Dutch it says that there are no updates available. I know that after
    installing cs4 there are updates but i can't load them automatically. I did
    a delete and reinstall, but still get the message.
    kind regards,
    2014-09-23 16:28 GMT+02:00 Atul_saini123 <[email protected]>:
        on my windows 8.1 pc (i5 processor with 8GB ram) I can't get the
    automatic update voor CS4 master collection. I removed my panda antivirus
    and still can't automatically update. somebody any suggestion?  created
    by Atul_saini123 <https://forums.adobe.com/people/Atul_saini123> in *Downloading,
    Installing, Setting Up* - View the full discussion
    <https://forums.adobe.com/message/6755843#6755843>

  • Open Item not getting Cleared automatically

    Dear Sir,
    For a GL "Cenvat Clearing" , we have ticked the option "open Item Management" in FS00 .
    Our business scenario is as below :
    After MIGO , we do excise posting using J1IEX and here in the posted Fi document the GL "Cenvat Clearing" gets Credited . Subsequently during the MIRO this GL i.e "Cenvat Claering" gets Debited .
    My problem is that when I see in FBL3n for this GL the relevant transaction still appear under the open Items . Pl guide me , as what is the reason for this entry not getting cleared automatically .
    Regards
    B Mittal
    Regar

    PO number cannot be taken as sort feild  hence the value is in blank always.
    You need to identify some value for this feild and as a process you need to tell your users to incorporate the same at the time of doing MIRO.
    Or other wise you can take out the assignment of sort key to this GL account, and as a process you can instruct your user to use reference feild and input a value. If you fell that this is a tedious process,
    the Identify another feild that is common for both debit and credit line items and try to post with a common valuie using, one ABAP program which will update this feild. Mind that this feild need to be in the OB74.
    reward if useful
    sarma

  • The delivery schedule lines don't get created automatically on MRP run.

    Hi All,
    The delivery schedule lines don't get created automatically on MRP run for subcontracting material.  I have maintained source list as follow eg.
    Valid from | Valid to | Vendor | Porg | PPI | Agreement | Item | Fix | MRP | MRP area
    02.11.2009 | 31.12.2999| XYZ | XY01|     |AA0000XYZE |10 | X |2 | ABC
    Could you please help me about this issue
    Thanks in advance.

    Hi Amit,
    Please ensure the value of Special procurement key in the MRP2 view for the material. It should be maintained as 30 - subcontracting.
    Thanks and Regards,

  • Internal Order for AUC Asset not getting created Automatically

    As per SAP Standard , when I create an  AUC Internal Order (KO01), and save , AUC asset is gets created automatically ted via AS01 and stores the AUC Asset in Internal Order settlement rule. 
    However when tried with the client Im not able to create, AUC is not getting automatically created and stored in Int Order Settlement rule.
    In config I have added investment profile to Ord Type  and in OAOA ( AUC Asset class setting , Investment profile is also checked)
    Kindly let me have your inputs to fix the issue
    Advance Thanks
    Sanjai

    Hi,
    In order to create AUC asset automatically by the system, you need to create an investment profile in OITA.
    Then assign this investment profile in the Internal order master data created through KO01 in the Investments tab.
    There is no option of assigning the Investment profile in the Order type.
    And in OAOA that is Asset class, select the radio button investment measure.
    You can default the Asset class of AUC in the investment profile or leave it blank so that same can be filled when system prompts for AUC creation.
    You cant see the AUC asset in the settlement rule once Investment order is created, but only after settlement of the balances to the AUC u can see.
    Thanks & Regards,
    Ravi Kumar

  • How can I get an automatic connection to wifi on startup?

    We lost internet connection during snow/ice storm. I have to manually connect to wifi now. How can I get an automatic connection to wifi?

    An 'uninterruptible power supply' that automatically steps in and takes your computer
    off the grid momentarily, will work in cases of brown-out (under-power) & surge (spike)
    and it does so at a fast rate. Most of these also offer a way to customize sensitivity to
    a certain degree, depending on model and should there be a valid reason to do so.
    An old-school surge protector, even if it has a few fancy LEDs, is no protection. And
    for less than a replacement logic board or an hour of authorized Apple repair, the UPS
    is a fairly good investment. Backup battery is user-replaceable in the better made units.
    Most of them offer extra ports that do not use the battery-backup power feature. If you
    need to have more items run when the power switches up/down or out, you'd need to
    consider a larger capacity backup power unit. In some instances, the makers of these
    (for a time, perhaps even now) did caution users to not install more than one UPS per
    room when the same leg may have inadequate grounding, since these can dump the
    excess surge power from several different UPS units and overload the ground.
    That said, the gamble is yours. I've found to have and use these is some protection
    and when away from the computer. Most settings for controlling them appear in OS X.
    No additional software is required. Other settings may be on the UPS front panel.
    Good luck & happy computing!

  • I keep getting a "new network interface has been detected. Hoping to stop getting this automatic message I configured it, or thought I did. I'm still getting the message. How do I stop it?

    I keep getting a "new network interface has been detected. Hoping to stop getting this automatic message I configured it, or thought I did. I'm still getting the message. How do I stop it?

    I thought the same too, looks like its not just me having this issue, hope Apple do something soon. Thanks for your help

  • I just installed Lion and the newest version of Logic express 9 (9.1.5) and every time i playback audio I get this error message:  [Disk is too slow or System Overload. (-10010) . Never had any issues before now...

    I just installed OSX Lion (10.7.2) and updated to the newest version of Logic express (9.1.5) on a macbook and every time I playback audio I get this error message:  [Disk is too slow or System Overload. (-10010) The Sudden Motion Sensor may have parked the hard drive head, or the disk performance is not sufficient to read or write all audio tracks, or the system was not able to process all data in time]
    Never had any issues before now... any ideas?

    Have a look into the Preferences folder (YourUserFolder/Libraries/Preferences/) and trash all Logic preferences.
    You'll have to setup the program again.
    cheers
    rob

  • Purchase order output type NEU is not get assigned automatically

    Dear All,
    when i am creting purchase order the output type NEU is not get assigned automatically.
    I have maintained message condn record for NEU and for specific PO doc type NB.
    same problame i was facing for the inventory docuemnts but i was resolved by running one SAP std program so please guide me if any such program is available for Purchasing documents also or any other setting i am missing to make.
    Pl suggest
    Regards,
    Vimlesh

    Hi
    Please check the following in customization.Dont check in NACE you may miss something like fine tune control
    1) Check the Message determination procedure is having the NEU output type
    2) Check the std Message determination procedure is assigned to PO
    3) Check the output type for the Access sequence, default data for transmission medium and partner function VN, Language & Form assigned to it
    4) Check the Access sequence for the condition tables
    5) Check the condition record in MN04/MN05
    6) Check the purchasing group has printer assignement
    7) Check the fine tuen control for operation 1 & 2 for message type.
    Hope your problem now solved.
    Thanks /karthik
    Edited by: Karthik on Aug 13, 2009 5:29 PM

  • WCS:- WLC Alarm not getting cleared automatically on WCS

    ALarm TAB:-
    ==========
    Severity: Message:
    Critical ------------------------------Port 2 is down on Controller.
    This Alarm is not getting cleared automatically, Where as the alarms generated for AP's are getting cleared, I would like to know is this the default behaviour or we need to look into some thing here. To clear this i need to manually delete the alarm.
    Any help would be greatly appriciated.

    Alarms are automatically cleared after 7 days. Clear the alarms manually if you want to clear the alarms before 7 days. For more information refer http://www.cisco.com/en/US/products/ps6305/products_qanda_item09186a00807a60f0.shtml#qa11.

Maybe you are looking for