Call blockers for q10

Blackberry is promoting a variety of call blockers. What does one want a call blocker for? Of course to block those annoying telemarketers call by call. I bought call blocker by x reve. My options were block all calls or no calls period.
Hello Blackberry??? What are you doing here promoting half assed useless apps. This does not help you or us.
Now I am looking for other more effective call blockers. Of course I want to block the last international telemarketer
that called me and keep them blocked that's all. Then each other one that calls I want to block them too. Ive looked elswhere for an app compatible with my bbq10 but when I read the reviews they are appalling. When is Blackberry going to move into the 2015 era and start screening out these useless apps and develop and promote effective apps that do what we the users want them to do? Has blackberry ever looked at the Iphone and how well the apps are integrated and available? That is why sales for Iphones are so high. It makes it hard to stay loyal when we have such struggles with BlackBerry.

Have you searched App World on your device?
Look at Call Recorder 10 and Call Recorder++
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Kindle app for Q10

Does anyone know what's up with the Kindle app for Q10? Is there any plan for the existing BB10 app to be made available for the Q10?

There is a version of Kindle over at Good eReader for BlackBerry that you can sideload. If you're not familiar with sideloading it just means to install via USB cable. I use a PC app called DDPB for sideloading but Good eReader has an app for it too.
http://apps.goodereader.com/playbook/playbook-android-apps/?did=179
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Since you don't allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don't want documented, I am calling and I want this call recorded for future reference. I have been a long time fa

Since you don’t allow emails any more – I suspect because of the numerous complaints with your service and the way you treat people that you don’t want documented, I am calling and I want this call recorded for future reference.
I have been a long time faithful customer of vzw and although the past year I have been late on payments many times and really couldn’t afford your exorbitant prices for services lots of other companies offer sometimes three times cheaper than what you charge, I have hung in there trying my best to meet my obligations.
This month has been no exception. You don’t know the background; the whole story of people’s lives. I know you could care less because all you care about is the profit-the money that comes in.
I was told when I agreed to pay my bill on the third per the recorded message that I had 14 days to pay…you cut me off anyway. The phones are not the tissue; your suspending my service means I cannot work. I may lose my job…how do you justify that? In any case? The least you could do would be to keep 4986 on and cut the phones off. But no. You refuse to compromise and meet the basic needs of your customer. What does that say about your company? I tried to call back on three separate occasions to tell you I couldn’t pay because of unexpected expenses but couldn’t get out of the automated system…sadly couldn’t get to a real person which also speaks volumes to me.
All this tells me this is a company I don’t wish to be affiliated with any more. As soon as I can, I will discontinue service with you…I know you could care less. I will honor the remaining portion of the contract but that’s it. You don’t deserve my business. I am a good, hardworking person who, at the sacrifice of myself and my needs, always pays her bills…albeit late at times. I realize others tell you stories and lies to justify themselves. That’s not me. If you knew what I had been through the last 7 yrs you would marvel that I am still on my feet…don’t judge too quickly. You could be wrong…and in my eyes you are by doing this to me.
God will see us through this extremely scary time of that I have no doubt. No thanks to your company and lack of understanding and mercy. I am doing the best I can. Sadly you are not.
See I have choices. MANY choices of providers for services you offer. I don’t have to be treated like this. I don’t have to succumb to your coldness and callousness. I intend to choose better (and cheaper). If your company doesn’t get the “people factor” back you will be sorry.

Problem here is you admit you cannot afford the service.
And you want to blame Verizon for losing a job because you have no cell phone.
If your job depends on that phone I would pay it on time every time if you need a job to pay your bill.
No other service is going to treat you any different. And if you cannot afford Verizon's monthly invoice how are you going to afford new devices, activation fees, possible security deposits on any other cellular carrier? You can't.
Also if you made an arraignment to pay and then decide you cannot do so, why should Verizon extend you service or credit, or why is it you want to use the service and data and not pay for it as agreed.
Get a prepay phone. Its evident the cost is too high for you to afford on post pay.
Good Luck

HT1660 I called in for help last week to move my Itunes files to my new laptop. I am about 71 songs short of what is in my library on my old computer. I keep trying to download the Purchased music that is "not in my library" and i recieve an error messa

I called in for help last week. I am trying to move my library from my old compurter (PC)to my new laptop. I am 71 songs short. I go to itunes, they to purchased, then click on "not in my library" then hit download. I keep getting an error message that says "this is not available try again later". Any suggestions?

Hello 8175405345,
We've an article which provides tips that can help get your content downloading from the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen

Two Iphones on the same WiFi network, using the same Apple ID receive calls meant for only one of the phones.

My husband and I each have an IPhone 6. We are using the same WiFi network and the same Apple ID, the phone numbers are different. When we are at home, both phone receive calls meant for one of the phones. Call can be answered from either phone. Is this a new feature and How can I turn it off?

go into settings then FaceTime then turn off iPhone cellular calls

On my ipad mini, when I delete an email from the inbox (and it goes into Trash), it immediately deletes that email from the server (ATT/Yahoo). I've called support for both ATT and Apple and can't find a way to have the emails remain on the server.

On my iPad Mini, when I delete an email from the inbox (and it goes into Trash), it immediately deletes that email from the server (ATT/Yahoo). I've called support for both ATT and Apple and can't find a way to have the emails remain on the server.
My husband and I share an email address and if he misses a day checking email on his notebook, he doesn't receive the items that I have sent to Trash on my iPad Mini.
Appreciate suggestions.
[The curious thing is, if I "move" the deleted emails from Trash on my iPad Mini into the Inbox, I can go to my notebook, open my online email and they are back in my ATT/Yahoo Inbox.]

Is your Yahoo account set up as POP3 or IMAP?

BW error: "invalid call sequence for interface when recording changes"

I am getting the error "invalid call sequence for interface when recording changes" when I try to activate a datasource in BW. Any ideas on how to resolve this error?
Thanks.

I already tried that. This is what's happening.. When I get this error, if I try again it will activate and gets collected into a transport. I moved this transport to our QA system. As soon as I try to execute an infopackage under this datasource in QA, I get the error datasource xxxxx must be activated. Before the excecution of the infopackage, the datasource is in "Active version executable". After I get the error message "datasource must be activated", the datasource in the QA system changes to "Active version not executable". I am not sure all these issues are related back to the "invalid call sequence" error I am getting when I try to activate the data source.
I also tried recollecting the transport from our Dev system to QA and it still gives the above errors.
Any help?
Thanks.

I guess the problem come from me or I really need those contacts before he calls me for it. I'll try some method that I got from some responders on your support website. Do you have or can you recommand any software that can solve this problem?

I guess the problem come from me but I really need those contacts before he calls me for it. I'll try some method that I got from some responders on your support website. Do you have or can you recommand any software that can solve this problem?
One more thing. I just update my iphone that my boss gave to me but it seems to be like it giving me some trouble. My iphone was updated not too long and was successful. I try to lock into it and it telling me emergency call. I plug it to my itune and it telling me that the sim card is not valid or supported. So I inserted my sim card that I usually use to call and it still saying the same. Please help me get into it.

And as far as paying for phone support, here are a few tips:
If you call your carrier first and then they route you to Apple, you usually don't have to pay for phone support.
If you are talking to Apple and they ask you to pay a support fee, ask if you can get an exception this time. That usually works once, but they keep track of the times you've been granted such an exception.
If you still end up paying the support fee, that fee only applies if it's not a hardware related issue. In other words, if it can be fixed by just talking over the phone and following Apple's instructions, then the fee applies. But if your device is deemed to have a hardware failure that caused the issue, then the fee should not apply, and you can ask for it to be waived after the fact.
This forum is free, and almost all of the technical support articles the Apple tech advisors use are available on this website. Literally 99% of what they can do over the phone is just walking you through the publicly available support articles. In other words, you're paying the fee to have them do your research for you. It's like hiring a research consultant to go look stuff up in the public library so you don't have to. You're capable of doing it; you'd just rather pay someone to do it for you.
It's like Starbucks. You know how to make coffee. Everyone knows how to make coffee. And Starbucks coffee isn't any better than what you could make at home for far less. But you want the convenience. So you're really paying a convenience fee. Milk is more expensive at 7-Eleven than it is at the grocery store... because it's a convenience store.

Function in select statement need to be called only for the last record.

Select state,
local,
fun_state_loc_other_details(19) details
from state_local
where pm_key=19
resuts:_
State Local Details
AP APlocal details1
UP UPLocal details1
MP MPLocal details1
i) The above query returns 100 records
ii) fun_state_loc_other_details is also getting called 100 times. But I want this function to be called only for the last record that is 100th record.
is there any way to do that?

Thanks amatu.
One more small query. Can I do it on condition based.
Select state,
local,
fun_state_loc_other_details(19) details
from state_local
where pm_key=19
Like if one state it need to be called once.
AP -- 50 records
UP - 20 records
MP -- 10 records.
fyi: this record no. varies
I want the function to be called for AP once, UP once, MP once.

Formal error: Invalid calling sequence for function modules

Hi All,
I have developed a function module for FQEVENT 620 Payment: Transfer Line Items for Clearing.
The clearing works fine.
After clearing the open items i need to post an FI-CA Document(BAPI : BAPI_CTRACDOCUMENT_CREATE) for each open item(cleared item)
I have used the bapi : BAPI_CTRACDOCUMENT_CREATE in the same function module that i have developed for FQEVENT 620 Payment: Transfer Line Items for Clearing.Here i am getting an error "Formal error: Invalid calling sequence for function modules".
So please let me know where i can use this bapi to post fi-ca document.Is there a BAdi or Enhancement Spot where i can use this BAPI or tell me what should i do to overcome this error.
Regards
Venkat

Venkat:
While I am confused about your business process - creating an open item when clearing one seems strange. Look into event 0020 which is called after documents are posted - it may present the opportunity to post process additional documents.
regards,
bill.

How to call webservice for each record in a table using ODI

Hi
I am new to ODI and Webservice. I want to invoke a scenario in ODI using web service. I hava a weblogic application server with axis 2 deployed.
But I want call webservice for each record in a table
For eg: "EMP" table have 50 records, for each record web service should invoke
Can any one help me on it.
Thanks,
phani
Edited by: user12774166 on Jun 6, 2010 11:16 PM

If your goal is "call" a web service, Jason's Straub's [flex-ws-api|https://flex-ws-api.samplecode.oracle.com/] is by far the best I've seen. You might want read more about it on [his blog|http://jastraub.blogspot.com/search?q=+flex_ws_api+].
Tyler Muth
http://tylermuth.wordpress.com
[Applied Oracle Security: Developing Secure Database and Middleware Environments|http://sn.im/aos.book]

SAP adapter giving the merged result set (First RFC call data + Second RFC call data) for second RFC call

I have a WCF Adapter service to call a SAP RFC. When I call the RFC first time, it gives me correct no of result set but when I call this RFC second time immediately after first call, it gives me merged result set (First Result set + Second Result Set).
e.g. We have a RFC which receives vendor number and blank object of result set as parameter and gives back the list of purchase orders as Response in object of result set for that vendor.
Suppose, we have a vendor "a" and vendor "b". For vendor "a" there are 5 purchase orders and for vendor "b", we have 4 purchase orders in SAP. When I call the WCF adapter service for this RFC for vendor "a",
it gives me 5 purchase orders. Immediately after first call, when I call WCF service for vendor "b", it gives me 9 (5+4) purchase order records which is wrong.
In brief, one RFC call is affected by its previous call.
For each new WCF request, a new object of result set is created, connection is opened, rfc is executed and connection is closed.
Can anybody have any idea on this?
Thanks.
Thanks, Nishant Gupta

Hi，
Please refer to the document
http://seroter.wordpress.com/biztalk-and-wcf-part-vii-about-the-biztalk-adapter-pack/

Online number does not appear as caller ID for out...

I have a Skype Premium account and an Online Number based in Stockholm, Sweden.
I have verified the Caller ID for my account is set for the Online Number starting with +468.
When I call my mobile phone (Swedish mobile operator), the ID appears as "Unknown".
When I call the Online Number from my mobile phone, the calling number is shown correctly.
What could be wrong?

jiang924 wrote:
I have an online number for my skype account. When I call others from skype, the online number does not appear on the receiving party's phone, instead the receiving party would see 0000123456
Note that I can receive landland originated calls to the skype account's online number.
Log into your Skype account here on the Skype web site, using the "Account" link at the top of this page. Once you log in, you will see Caller ID settings. If your number is from one of the countries whose numbers can be used as Caller ID (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), you should be able to select it and save that for your Caller ID setting. If your number is from some other country, it can't be used as Caller ID when calling phones from Skype - and you would need to use a mobile number (except those from Japan or Mexico) that has gone through the two-step SMS verification process from Skype.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

ODBC call SQLDriverConnect for data source Server name failed: [ . Notify Customer Support.

Need help !
While running DS job through designer we are getting below error:
ODBC call <SQLDriverConnect> for data source <SErver name> failed: <[>. Notify Customer Support.
Additional notes:
1. Source and Target datastore are getting connected properly as i have imported table's definition using it.
2. Source and target data store pointing to SQL server 2008 R2 express edition DB (64 bit).
3. It seems like server machine has both 32bit and 64bit drivers installed on it. Please refer attached driverdetails.jpg file for more details.
Thanks

Hi did you referred this :
ODBC call <SQLDriverConnect> for data source <MyComputer\SQLServer2008R2> failed: <[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.>. Notify Customer Support.

Why cant i use a bought call-tone bought through I-tones for calling tones for just one of my contacts?

Why cant i use a bought call-tone bought through I-tones for calling tones for just one of my contacts?

What makes you believe that you can't? To set a custom ringtone (or SMS tone) for a contact, go to that contact entry, tap the Edit button in the upper right. You can then edit both ringtones and SMS tones for that contact.

Call blockers for q10

Similar Messages

Maybe you are looking for