Campus manager user tracking problem

Hi We are using LMS 3.0.1 and the campus manager verson is 5.0.2. We have two subnet which are used for the management ip of switch kept in two different geographical areas. I have made the entry of all devices kept in both subnets and all the devices are know device in DCR, RME and DFM. also after data collection the devices are shown in campus manager database. But I am not able to learn the end host details of the hosts connected to one of our segment.
even if the perticular subnet is not appearing in "campus user tracking" as well as the devices belongs to the subnet. but I am getting all end host details from the second subnet.
please help.

Hi clarke,
i have updated the cm to the latest but still it did not learn. Later i added the 10.188.7.x ip addresses manually in the discovery settings instead of " *.*.*.* " - ip range. Now i am able to see these devices in topology view > layer 2 veiw as connected devices & not seen in unconnected..
Now i need to see the hostname, ip address etc details of these segments in UT acquisition window.... Secondly in topology view, the core switch is showing in "?" question mark symbol. This device is WS-C6509-E (sup-bootdisk:s72033-ipbase-mz.122-33.SXH3a.bin). I tried to delete this device from common services and added it again, there i selected "ws-c6509", i did not see the " ws-c6509-E".
in Cisco site, the serial number of the device is showing as the device "VS-C6509E-S720-10G"
Can u pls help me on this..
regards
rajesh

Similar Messages

  • Campus Manager User Tracking Report - dot1xEnabled = False

    The Campus Manager User Tracking Report has the dot1xEnabled field that is always false.
    It was my understanding that the switch will send SNMP Trap Notifications to Cisco Works regarding the status of 802.1x authentication per port.
    We have configured per port:
    snmp trap mac-notification added
    snmp trap mac-notification removed
    and globally
    snmp-server host x.x.x.x  abababa udp-port 1431 MAC-Notification
    With no success, so we opened a TAC case, 614376387 and we were told by TAC and the Development Engineers that this "feature" does not work in LMS 3.2 and Campus Manager 5.2.1 and that this feature will be available in the next new release.
    I thought I had read on this forum that some folks have this 'feature' working, where this field shows the current status of 802.1x per access port.
    Has anyone been able to get this 'feature' to work?  And if so, what versions are you running and what were the 'tricks' to get it working?
    Much appreciated.

    The MAC address notification traps only alert Campus to the fact that a MAC address has been learned or removed from a given port.  That starts the dynamic UT process.  With no other information, you will potentially see a new record appear in UT shortly after receiving the trap.  However, that record will not have IP or username data associated with it.
    To get the IP data, Campus will poll the CISCO-DHCP-SNOOPING-MIB to pull IP data.  To get username data, Campus will poll the IEEE8021-PAE-MIB of the switch to get dot1x information.  So, your switch must be configured for dot1x, and it must support this MIB (in particular, the objects dot1xAuthSessionTime, dot1xAuthSessionUserName, and dot1xPaePortCapabilities).
    Without dot1x, hope is not lost.  If the end host is running Windows and the UTLite tool, then when the user logs in, UTLite should start from their logon script, and send a UDP update to Campus with the username and IP of the host.

  • LMS Campus Manager User Tracking and LLDP

    I haven't been able to find a definitive answer on whether User Tracking can complete its
    discovery using LLDP (802.1AB) instead of CDP. My WAN provider only supports LLDP.
    If anyone has successfully used LLDP for this purpose I'd appreciate a reply - otherwise I'll have to head to the lab.
    Thank you....William

    No, LLDP is not supported by Campus Manager.  Only CDP is supported.

  • LMS 4.0.1 User Tracking Problem "No end hosts found"

    Hi everybody,
    I have problems with devices that do not appear in the user tracking utility.
    These devices are a cisco WS-C4506-E with Supervisor II-Plus-10GE ​​and two WS-C6509 with Supervisor Engine 720.
    When I start acquisition for the devices I receive following message: "Device unreachable". When I try to watch the end hosts, I get following Message: "No end hosts found."
    I have patched LMS 4.0.1 with CSCto06189 Patch.
    Is there perhaps a solution?
    Roman

    400 devices - do you mean 400 end users?
    Do they all use a Layer 3 default gateway that is among your discovered and managed devices?
    Have you followed the steps and troubleshooting from around page 24 of this guide?

  • LMS 3.2 and user tracking problem

    rme 4.3.1
    cm5.2.1
    cv 6.1.9
    dfm 3.2.0
    ipm 4.2.0
    portal 1.2.0
    cs 3.3.0
    cwasst 1.2.0
    running on windows server 2008.
    This was a clean bulid, and we imported all pertinent data from our old lms 2.6 server. This was in september 2010. Everything worked as expected and continues to work except for......
    We are in an upgrade cycle for our 4500s. We are upgrading from 12.2.50-sg4 to 12.2.50-sg8, and also upgrading rommon to 12.2.31r-sga4.
    It appears that user tracking is not working anymore for the upgraded 4500s. UT still runs, and works perfectly for all other devices, including the 4500s that have not been upgraded yet. I know this sounds goofy, but it really does seem to be the common denominator. I've checked the windows updates, package updates, etc in trying to figure out what made this happen. It really does all come back to upgrading to the above version. All aspects of this server are running great and as expected, it's just that UT for the upgraded 4500s isn't working anymore. I do run the logbackup script weekly (past experience has taught me to do this), and try and keep up with any patches or package updates, etc.
    If anyone has seen something similar or can suggest anything, I'd appreciate it. I think I am going to have to open a case on this. Thanks - chris

    Michel,
    Indeed, it looks like that is the problem. I guess I was focused in on CW rather than the whole picture. But yes, indeed, if I walk the mac table for a vlan on a 4500 that has not been upgraded it works. If I do the same on an upgraded one, I get nothing.
    The cautious optimism is that we do have a sup6 at our DR location that is running 12.2.53-sg1 and this test works on that switch. So as long as that
    version isn't deferred, we'll test that on one of the older sups to verify.
    So thanks for the help, I appreciate it - chris

  • User tracking problem - lms 3.2

    Noticed a pretty weird one. LMS 3.2 on windows 2008.
    Everything had been running normally. A while back we noticed the user tracking
    tables diminishing, and found out it was due to a bug in the code we were running
    on our 4500s. So we started an upgrade cycle and the tables started growing again.
    UT runs fine, but there is nothing newer than Feb 25th. Even if I do a manual UT discovery
    it seems to run fine, but there are no new entries in the table, or rather nothing with the
    last seen date of today when I just ran it.
    I did do the usual, run the logBackup script, clean some other log files, I even rebooted
    the server, but it still doesn't update with any new UT entries. I have checked and can
    do snmpwalks per vlan on the cam tables, so I don't believe it's anything with the switches,
    I think this is something within UT or campus.
    I would be happy to send up any log files that might be useful. Thanks - chris

    Gaganjeet,
    that's interesting (and frustrating). In the screenshot I sent yesterday, the UT count is 12500. We should be well over 13000 end hosts.
    In doing a search through the UT.log, one of the IPs that is not showing up when I search user tracking is:
    2011/03/28 10:02:06 EvalTask-vmpsadmin-05 VmpsAdminSMFGetIpXlateTable: router=10.255.3.130 ip=10.242.9.15
    mac=00-19-99-91-a1-14 subnet=10.242.9.0 mask=255.255.255.0 vtp=PETERSACC_10.255.3.130(T) vlan=PETERS-C-USER-1
    vlan Index=1709
    It is clearly in the logfile. But if you refer to the attached screenshot titled peters-ut-screenshot, if I search on just 10.242, I get
    "no end hosts found". This site was brought online a couple weeks ago.
    The second screenshot, titled PACS-subnet, shows no end hosts found. This is due to the SW bug we found in 12.2.50-sg8 and
    the entries already having been purged. This switch was upgraded to 12.2.53-sg3 on March 14th so the entries should be showing
    up. I have not searched ut.log for this subnet. The bug we found with 12.2.50-sg8 was that an snmpwalk of the mac tables, per vlan,
    returned nothing. With 12.2.53-sg3, an snmpwalk of the mac tables per vlan does return the mac tables per vlan.
    The third screenshot is just searching on 10.255, which covers our datacenter. While there are a lot of entries, the "last seen" date
    is Feb 25th. As these servers are always on, I would expect to see the last seen date as yesterday when the last ut run was executed.
    I have not searched ut.log for any of these entries.
    So it does indeed appear that the ut discovery finds the end hosts. But when you pull up the user tracking utility to search, there is nothing newer
    than February 25th. I hope this helps.
    Thanks again for the help, I appreciate it - chris

  • Ciscowork 2000 User tracking problem: not listing all IP address

    Hello All!
    We are troubleshooting ciscowork user tracking function and we don`t get any ip address outside the subnet where the server is!
    Can someone explain how cisco work get the list of all ip addresse SNMP, CDP, scan ...??? From what I have read it seem to be from SNMP. Can I found which OID it use?
    User tracking list all mac addresse, all switches but not the ip address. It is not in vlan 1. It stop working since we close vlan 1 and move the server to another vlan.
    If your answer is: " cisco work can't see your gateway" Can you be more precis...I have seen that sentence but I don`t what that means...
    thanks
    ch

    First i would check to see if ANI actually discovered teh device. After checking that the IP address filter is correct and your snmp strings are correct then u can try lengthening the snmp retry timeout values: Also check DNS or your local host file for any typos.. failing this try some of these :
    Click on Diagnostics > Discovery Metrics > and click on the hyper link number of devices.
    This will show u exactky what ANI has discovered and its CDP relationship to other devices. If you do not see your router or L2/L3 device there, then u can try the following:
    - check cpd neighbours and correct as required and retry discovery
    - select jump router boundries from Setup > ANI admin > Discovery Settings and retry
    - if all fails then add the device as part of the seed file.

  • User Tracking - Application error: URN_NOT_FOUND

    hello
                running ciscoworks 3.2 on Windows 2008 SP2 - installed apps are:
    1.  Campus Manager 5.2.1
    2.  CiscoView 6.1.9
    3.  CiscoWorks Assistant 1.2.0
    4.  CiscoWorks Common Services 3.3.0
    5.  Device Fault Manager 3.2.0
    6.  Integration Utility 1.9.0
    7.  Internetwork Performance Monitor 4.2.0
    8.  LMS Portal 1.2.0
    9.  Resource Manager Essentials 4.3.1
    When I run a quick report in Campus Manager (User Tracking > Reports) I get the following error appearing in a window:
    Application error: URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!.
    Acquisition is working fine – on completion it states how many new hosts have been discovered but I get the above error when I try running a report.
    Reloaded server but problem persists. I’ve attached the output of pdshow and the cmapps log - any advice/guidance appreciated.
    Thanks
    Andy

    Hello,
    I have the same problem.
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Tabla normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman","serif";}
    LMS2.6
    could anybody help me?
    I attach the ctm_config.txt file.
    Thanks

  • LMS 2.6 User Tracking - Application error: URN_NOT_FOUND

    Hi,
    When I run a quick report in Campus Manager (User Tracking  > Reports) I get the following error appearing in a window:
    Application error: URN_NOT_FOUND :  urn "ogs_server_urn" : Not found !!.
    Could anybody help me?
    I attach the ctm_config.txt file
    thanks

    From which directory did you get this ctm_config.txt?  I need to see the ones under NMSROOT/MDC/tomcat/webapps/campus/WEB-INF/lib and NMSROOT/MDC/tomcat/webapps/cmapps/WEB-INF/lib.
    Since this is LMS 2.6, I also need to see the output of the pdshow command.

  • User Tracking in LMS 3.0.1

    Hello Clark,
    I have read the user guide for the CM 5.0 for Tracking users and also i have read the Understanding UTLite,I can't see the users login???
    what can be the possible reason i have missed.
    Thanks

    Hello Clarke,
    The domain administrator made a mistake in specifying the details in DC,i just added,I have less windows knowledge,where to find the logon scripts files for step 3 in windows 2003 server.as per the campus manager user guide .
    Edit the UTLiteNT.bat file:
    a. Open the UTLiteNT.bat file.
    b. Locate the following line and replace domain and ipaddress with the domain name of the Windows
    domain controller and IP address of the computer running the Campus Manager server:
    start %WINDIR%\UTLite33 -domain domain -host ipaddress -port 16236
    If port 16236 is already in use, enter a different number. This port number must match the number
    that you entered in the Use Port Number field, in the User Tracking > Administration >
    Acquisition > Acquisition Settings page.
    For more details, see Modifying Acquisition Settings, page 7-10.
    Step 3 Edit the logon script files to run the UTLiteNT.bat file when users log into the network by adding this
    line:
    UTLiteNT.bat
    Thanks,

  • LMS 4.2.2 User Tracking - IP resolving

    Hello,
    I have made a fresh install of LMS 4.2.2 and I have a problem with the user Tracking.
    My architecture :
    A pair of 4500-X running  Version 03.03.00.SG
    10 stack of 2960-S running IOS : 12.2.55.SE5
    The 4500-X are routing cores. Everything is running SNMP V3 and I have entererd the commands for each VLAN :
    snmp-server group SDIS03-GP-RW v3 priv context vlan-x write SDIS03-V-RW
    All equipments are seen correctly by LMS. My problem is the user Tracking does not show the IP Addresses, I only have the MACs. I suppose this is an issue with ARP Table of the 4500-X that are not dowloaded by LMS but I don't konw why.
    I have seen several post on the forum for similar problems but it do not seems to resolv mine.
    Thanks by advance for your ideas.
    Regards,
    Abel.

    I found a reference on the LMS Supported Devices Table:
    The following features are not supported:
    VRF Lite, LANE Management, User Tracking, VLAN Management
    Configuration Deploy Protocols: HTTPs
    Configuration Fetch Protocols: HTTPs
    I wonder if it's due to this fact (mentioned in the 4500-X IOS XE Release Notes):
    The following features are not supported on a Catalyst 4500-X Series switches:
    •CISCO-IETF-IP-FORWARD-MIB
    •CISCO-IETF-IP-MIB

  • Campus User Tracking Quick report of wan location

    Hi All,
    I have one WAN location for which I am not getting campus user tracking for the end host.
    I added all the WAN location switches in cisco works and getting logging report. But when
    I tried to pull up end host report via IP ADDRESS or hostname it says end host not found.
    Any help would be appriciated.
    Thanks in advance.
    Samir

    Do the end hosts show up by MAC?  Can you search for end hosts based on the remote switch name or IP?  In order for UT to display IP information, the ARP cache of the remote router needs to be populated and pollable via SNMP.  That means the remote router needs to be managed by Campus Manager.

  • Campus User Tracking Quick report

    Hi All,
    I'm new to Cisco works and I'm trying to generate a report and wondering if anyone can point me in the right direction.
    I am trying to run report via campus user tracking --> quick report with the vlad id.
    But my problem is, for some of the vlan I can't get the report, as I know we have lot's end hosts in that vlan.
    Our network consists of bridge vlan of 200-210 from core switch --- distribution switch -- access switch.
    I am getting report for my 205 vlan but not for others.
    Thanks for your reply in advance.
    Samir

    Hi All,
    Can anyone help in this issue will be appriciated.
    Thanks,
    Samir

  • LMS3.2 - Campus User Tracking - Configure Subnet Acquisition

    Hi,
    under
    "Campus User Tracking - Aministration - Acquisition - Configure Subnet Acquisition"
    Then I have the window with "Perform subnet based acquisition", there is the list with "Available Subnets"
    1.     From where are coming these subnets?
    2.     Where can I configure this list, add/delete subnets?
    Regards Marcus

    These subnets come from the routers that Campus Manager is managing.  You cannot manually add subnets to this list.  They will be discovered automatically from the devices managed by Campus.

  • Problem With Device Management in Campus Manager

    hi , there are 474 devices in common services device managemant which I grouped them to userdefinedgroups .
    then I applied the auto allocation mode in Campus manager to apply all managed devices , when I click apply it mentioned that it would add 474 devices . but after data collection was finished just 461 devices was added and the rest of those are now in the Include devices under device management !!!
    why does it hapened ?   
    thank you .

    Hi Marian,
    Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
    Content Activation Log
    Log for Setup ID 20100819135323
    20100819 135323[ERROR ]: Current Status: ERROR
    20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
    20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
    20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
    20100819 135323[ERROR ]: Prerequisites check failed
    20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
    I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
    Regards,
    Rue.

Maybe you are looking for