Can a freelance LabVIEW programmer become an Alliance Member?
Looking at the application form it is clear that NI are (understandably) only interested in established companies who will generate lots of hardware sales for them. What about all the talented LabVIEW application and instrument driver developers who work on contract with smaller companies - any exposure for us? These are exactly the kind of people who need a central advertising space but cannot normally fund it themselves.
> Thank you for the question! I'm curious for the official answer of the
> company. I asked the same question at a regional meeting and got a
> "you have got to draw a line somewhere" answer.
> I think a lot of small businesses are interested in a paid
> quality/expert-based mini-alliance membership.
>
This isn't an official answer, but I can tell you what I have seen.
There are individuals that enter into the alliance program. They
typically have expertise in some area that makes them a good integration
choice for engineers using NI products. The key in my opinion is to
gain the confidence of the local sales person and convince them that the
regional users of NI products would be better off if you were doing
integration work with the allianc
e program affiliation. You can also do
integration and not be in the alliance program.
Ultimately, the salesperson wants to see the people they sell products
to be successful in using them. If you have something to add to this
situation, then they will be open to sponsoring you into the program.
If you are looking to get your feet wet and get some experience, what
I'd recommend is approaching an existing alliance member in your area, a
busy one, and let them know that you are interested in free-lance work.
It will let you try things out, see if this sort of work is up your
alley. If things work out, then you have something to approach the
salesperson with.
Greg McKaskle
Similar Messages
-
Freelance Labview programmer wanted
Freelance LabView programmer wanted, New Haven Ct area.
Must possess shovel (dig a project out of a hole). Vi reading analog input
from daq board will properly read input voltage when running by itself in
timed loop. It does not read voltage when running in parallel with other
vi's in program. The digital IO's on the same daq board can be written to
with no problem in the same loop.
Bill LubarskyIf you need some programming help, we have a hundreds of freelance
experts ready to help:
http://www.ifreelance.com/find/providers/browse.aspx?ba=1&c=12
Or, if you are a programmer, please join our site to begin offering
your service to buyers in need of your expertise:
http://www.ifreelance.com -
Freelance LabVIEW programmer | Singapore
Good day,
We are seeking freelance LabVIEW programmer
for a functional test software development that involves DMM, DAQ and
DIO etc. If you feel comfortable with the following, please leave your
contact here. We will contact you should you be considered.
Venue: Singapore
Project: FCT SW x1
Software: LabVIEW 7.1 and above
Others: You must be allowed to work in Singapore
You will be required to make yourself available at our office for dedug/ integration, and at site for project commissioning.
Please be informed that only short listed applicant(s) will be contacted.
Thank you very much.
- On behalf of my employer.
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.comDear Sir,
I am very much interested to have freelance projects related to labview. I also had done 2 free lance projects for University of South Australia in june 2009. I also have conducted 2 workshops on LabVIEW in my university (NEDUET is a license holder of LabVIEW).
The freelance projects are:
• Simulation of Complete Home Automation using LabVIEW – The system is designed to simulate the electronic automated home, designed for the course of Virtual Instrumentation Programming, University of South Australia, June’09
• Efficient Simulation of SCADA system of Unsought Tablets Detection for Pharmaceutical Industries – Extremely perfect and efficient approach to simulate any industrial plant. Two Vis were designed for this simulation, one simulates the server and other simulates the plant, and they both were linked to each other through global communication functions, designed for the course of Virtual Instrumentation Programming, University of South Australia, June’09
The workshops conducted in NED University are:
• Hands-On LabVIEW – A two session workshop organized by IEEE branch NED University of Engineering and Technology, Karachi, Pakistan, 12th and 14th February,2009, Presentation 2. It is available at the following address
http://www.neduet.edu.pk/electronics/electronics/pdf/Labviewlect.htm
• Hands-On National Instruments – A two- session workshop on handling NIPXI-6229, NISCXI-1112,1162 and 1124, Instrumentation Centre, NED University of Engineering and Technology, Karachi, Pakistan, 28th June and 1st July, 2008
• Getting Started with LabVIEW 8.5 – A two-session workshop, NED University of Engineering & Technology, Karachi, Pakistan, 17th and 24th April, 2008, Presentation 1. It is available at the following address
http://www.neduet.edu.pk/electronics/electronics/pdf/Labviewlect.htm
Hasan Baig
Electronic Engineer
NED University of Engineering and Technology
Karachi, Pakistan
Tel: +92 342 250-2808
email: [email protected] -
Hi everyone!
I'm here to offer my services to anyone who is in search of a freelance programmer. I'm 24 and currently a 3rd year student in Electrical engineering . I've been programming pretty intensively for almost 4 years now in my current job (part-time for now!). I have a few projects under my belt, many of which are fairly extensive. I have very good knowledge of radiofrequencies, specifically microwave range, ActiveX (COM in general), GPIB instrument control, OOP programming in LabVIEW, etc. etc.
I'm simply offering my help because I enjoy programming in LabVIEW and would like to make a few extra bucks in my spare time working from home (being a full-time student with a job leaves me with only a few hours a week).
My main fields of interest are RF and biomed but I will review any type of project that is offered to me. Hourly rate is very negociable, I'm a student after all!
I'm located in Montréal, Québec, Canada (Oui, ma langue maternelle est le français (québécois )!
Anyone looking for more information can contact me at: [email protected]
Thanks for the interest!
Yohan BelvalThanks for the info!
Sorry for the inconvenience.
Moderator: Please delete thread!
Message Edited by NahoY on 09-24-2007 11:15 AM -
Freelance LabView Programmers where are you?
I am searching for a freelance LabView programmer (in N.Wales / Manchester U.K.) does anyone know of a site that connects projects to freelancers?
Do you need someone locally, or will a telecommuter be appropriate? I find it useful to have contractors working on the other side of the world - you can give them a task at 5pm, and the answer's on you desk (ie: in your email inbox!) by 9am the next day...
cheers,
Christopher
Christopher G. Relf
Certified LabVIEW Developer
[email protected]
International Voicemail & Fax: +61 2 8080 8132
Australian Voicemail & Fax: (02) 8080 8132
EULA
1) This is a private email, and although the views expressed within it may not be purely my own, unless specifically referenced I do not suggest they are necessarily associated with anyone else including, but not limited to, my employer(s).
2) This email has NOT been scanned for virii - attached file
(s), if any, are provided as is. By copying, detaching and/or opening attached files, you agree to indemnify the sender of such responsibility.
3) Because e-mail can be altered electronically, the integrity of this communication cannot be guaranteed.
Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License. -
Does anybody can give me a simple example about the labview programme calling dll ?
Does anybody can give me a simple example about the labview programme calling dll ?And the dll is also writed by using labview .I just want to study the process of the labview programme calling dll file.Thank you!
Hi,
Please click on "Find Examples" in the "Getting Started Window"
A window named "NI Example Finder" will pop up.
In this go to "Search" tab
Type "DLLs"
You will see a lot of examples.
If you're online, you'll see user examples too... -
LabVIEW Programmer​s needed in Detroit
Greening is looking for multiple LabVIEW programmers with some experience. Below is our job description. You can contact me directly at [email protected]
LabVIEW Developer / Design Engineer
Job Description
The LabVIEW developers at Greening work in a cross functional team environment under multiple Certified LabVIEW Architects that guide and train the developers. Developers spend the majority of their time programming Test and Automation applications in LabVIEW™. Developers also participate in the system design including the selection of sensors and data acquisition hardware. Developers are required to travel for the commissioning or startup of their projects.
The successful candidate will be a motivated fast learner as this is a fast paced and growing group. Developers will be tutored through the National Instruments certifications for LabVIEW. This is an ideal position for a programmer or engineer that is seeking to become an expert LabVIEW programmer.
Education Preferences: BSEE, BSCE, or BSME
Experience in the any of the following technologies is helpful:
Hardware: National Instruments PC Based DAQ, FieldPoint, PXI, IOTech DAQ, Embedded Controls, Industrial Computers, sensors, and wiring
Software: LabVIEW, TestStand, Visual Basic, CAD programs (AutoCAD, TurboCAD)
Integration: Data Collection, Motion Control, Real-Time Embedded Systems, Machine Vision, Industrial Automation, Distributed Control Systems, Database Design, SCADA Systems, Sensor Selection, Signal Wiring MethodsDear Sir/Madam,
This is in reference to your mail regarding job vacancy at your esteemed organization. This kind of opportunity, which I am eagerly waiting for. I am very confident that I can prove my excellence if I get an opportunity in your organization. Being an enthusiastic engineer, I look forward to working with your organization, where in I undertake to put my abilities, skill set and experience as an input and the growth of my career and company name and profits as my output.
I have a sound and 4+ years of constant exposure towards Software Development in LabVIEW and TestStand.
I am a Masters graduate in Electrical Engineering and I am Certified LabVIEW Associate Developer (CLAD). Expertise programming with hardware interfaces like VISA, GPIB, PXI, USB...etc and I offer myself with flexibility in working and relocation is not a constraint for me.
Presently I located in Germany and working with National Instruments selective Partner company. I am very much enthusiastic to relocate to USA.
My resume is available upon request. Please mail me at [email protected] I will be at your convenience.
Thanking you Sir/Madam,
With Kind Regards,
Sashidher Gundogi -
Part time LabVIEW programmer needed
Hi All,
I am looking for a part time LabVIEW programmer to help maintain and enhance
an existing LabVIEW application.
The company is located in Central Florida area - someone local would be most
desireable. The program is fairly complex and interfaces with proprietary
DAQ hardware. If you have less than 2 years of experience, its probably
more than you would want to tackle.
Goto http://www.rgm-isis.com/ to see product info
http://www.rgm-isis.com/prod01.htm here is one of the few screen shots.
If you are interested please respond to [email protected], please don't
respond to the E-Mail that this is posted from.
The web site also has phone numbers and addresses.
Thanks
ChrisChris;
I realize you are looking for a permanent Labview programmer, but you might find the flexibility and cost effectiveness of having a contractor working on a project basis an attractive alternative.
We are a small group of programmers who specialize in, but are definitely not limited to, LabVIEW and DAQ applications. Our model is a little unusual in that we contract through a company in Connecticut, while we are individually located throughout the country (CT, TX, AZ, CA).
Every one of us has a degree in some engineering discipline with varied levels and types of industry experience. We try to match up an engineer(s) to a particular assignment based on their expertise. They also become the point of contact for all contract negotiations.
Generally, we tr
y to complete a project with minimal to no site visits, for two main reasons: it helps us keep the cost of a project down; given the scope of most one-time assignments, it is completely unnecessary. We have enough instrumentation and equipment to test most smaller systems. Granted, we may not own any particular instrument that you happen to be using (we won't have a $30k Tektronix logic analyzer!), but we can make special arrangements as required.
If you are interested and want further information, feel free to contact me at [email protected]
Regards
Eric -
How can i use labview for notebook
i want to know spec of notebook for install labview programm.
thank you vermuch.
sattayaSattaya,
here you can find the system requirements for installing the LabVIEW development environment.
Please post merely LabVIEW related questions to the LabVIEW board. The LabVIEW community is much bigger than the motion control community, so you will get answers quicker there.
Regards,
Jochen Klier
National Instruments -
Is it possible for visa/labview to become confused?
I have an application that uses visa serial comms to read quartzdyne sensors from a Qlink module. Two sensors are used. Each sensor measures both P and T. After approx 30 mins of operation it was noted/logged that Sensor A’s value reverts to sensor B’s labiew indicator, and sensors B’s values reverts to A’s indicators in labview. Like labview has becomes confused and swapped them over!
It reverted when labview was momentarily unable to read sensors A; the value was displayed in labview as ‘0’. I can live with a momentary loss, however i cant live with the values swapping over like that.
Is this something anyone has came across before?The delay is not the most reliable way to handle such situations.
Does the messages sent from the devices have some identifier?
Or you could read a specific number of characters, or up until a message seperator.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be! -
LabVIEW programmer needed for full time position, Orange County CA
Anaheim CA 92801
[email protected]
Job Title: Project Manager
Job Type: Permanent
Job Location: Anaheim CA
Main hardware expertise required: Compact DAQ/RIO (cDAQ,cRIO), Enclosures, Cabling, Other (please comment)
Main software expertise required: LabVIEW, LabVIEW Real-time (RT)
Job Description: LabVIEW programmer needed to program and update a series of technologies while using NI CompactRIO and Single Board RIO applications. Some basic networking and basic electronics experience required.
40 hrs/wk at our Orange County facility.
What qualifications and T&M certifications do you require? Technical, LabVIEW Certified Developer Prefered
Salary Offered: $60K-80K based on experience and qualifications
The attachment is a picture of the prototype ETU unit. The DBA of the company is "GreenLink Systems," our website is www.greenlinksystem.com
Attachments:
ETU and Staff.jpg 186 KBBill,
We are able to offer you the help you need on
this. I work for a LabVIEW/test-system consulting group based here out
of Salt Lake City...not too far if a quick trip is needed. Among the
six of us, four of us are former NI employees and we count with a lot of LabVIEW experience and regularly do
contract work, local and remote. This sounds interesting and right up
our alley as far as experience goes. I'd refer you to our website for
further info about different projects that we've done for many
clients. www.mooregoodideas.com.
If this seems workable for
you, feel free to shoot me a note at [email protected] I'd be
curious to know more about what you're after and how we can help you
out.
Thanks,
Jim -
We are a UK South-West based LabVIEW consultancy company looking for a LabVIEW programmer preferably with advanced signal analysis and processing skills, to become part of the team or work as a short term contractor. We will be looking to advance their skills through a range of different projects that we work on, from aerospace test and measurement, through to shop floor data collection and User Interface marketing.
Must have at least two years experience in LabVIEW and have an electronic engineering based degree or be able to show signal analysis is an area of expertise. We are looking to fill the position as soon as possible.
Please your CV’s to the below address.
[email protected]If the candidate had all the correct attributes then it could indeed be an option.
Regards
Peter -
How to start a second labview programme automatically when first programme is aborted ?
Hi,
I have two independent labview programme. I want to run one programme at first. Second programme should start automatically if first programme is aborted by clicking abort button. Could you please help me in this regard.
ThanksWould it not be better to close the meters when you close the application and have your application exit gracefully rather than having it start another one?
(You can call an executable from within LabVIEW using the System Exec VI but I don't think you need that here)
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets -
LabVIEW Programmer – Enable Integration
Enable Integration (a division of Enable Training and Consulting, Inc.) is seeking a LabVIEW programmer to join our integration team and immediately be a core part of several projects. Today, we are a team of 20 employees and have a diverse range of clients: Bosch-Rexroth, FIRST Robotics, University of Waterloo, LEGO Education, National Instruments, and Solid Works.
We are a dynamic employer with a flexible working environment and atmosphere. Our integration team specializes in consulting and providing custom hardware and software solutions for test, measurement & automation applications for worldwide clients in a variety of industries. Our team has over 65 years combined programming experience and have worked on projects both large and small, and have recently been recognized as a National Instruments Alliance Partner with exceptional technical resources at NIWeek 2013. Please visit www.enabletc.com for more information about the company.
Duties & Responsibilities:
We are looking for a self-motivated LabVIEW programmer who will excel in a fast-paced consulting environment, will excel to meet deadlines and ensure the success of our customers. We are looking for someone who has recent experience developing application using LabVIEW.
Your primary efforts will encompass all stages of software engineering application design, including:
Requirement definition and gathering, Specification writing
Systems Design & Architecture
Algorithm development
Documentation (Code and Project Management)
Unit, Functional, Validation & Verification Test
Deployment & Application Support
This is a full-time position and candidates will be expected to work out of our Milton, Ontario head office.
Desired Skills & Experience
4-year technical degree, or 3-year technical diploma from accredited colleges or universities
Experience programming hardware and/or software applications using LabVIEW
CLAD/CLD/CLA certifications are an asset
Discipline and organization with respect to software maintenance and version management
Experience with source code control & source configuration management tools a plus (TortoiseSVN ideal, however will consider applicants with working knowledge of Perforce, ClearCase etc.)
Strong troubleshooting and debugging skills
Understanding of basic signals and systems concepts
Sensors and actuators
Analog and digital signals
Data acquisition concepts and hardware
Communication protocols
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
Self-motivated team player
Effective time management
Strong written skills in English
Code documentation, Project management & Progress Reports
Team communication/updates
Immediately eligible to work in Canada at time of application
Pay is commensurate with skills and qualifications of the applicant.Kindly specify the email address to apply to for the mentioned job
-
How can I use the CAN MODULE in LABVIEW 6i?
How can I use the CAN MODULE in LABVIEW 6i?
HELP ME! PLEASENot sure what your real question here is, but I'll take a stab at it.
The NI-CAN drivers (module) only work with the NI CAN cards. If you have a different vendors card, you'll have to contact them to see if they have LabVIEW drivers.
If you do have a NI CAN card, then you just need to install the NI-CAN drivers and you're ready to go. Have a look at the examples for help in getting going.
If you're having a specific problem, please give us some more details and we may be able to help out a bit more.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Maybe you are looking for
-
Hello, When I use itunes on my macbook to view the contents of my iphone 5, the bar at the bottom of the window that shows me how much data is taken up for different categories says that I have 9 GB of video data. The thing is, I deleted all of the v
-
Plug-in Error for Acrobat 6 Professional
Working with Vista on a 2.66Ghz laptop with GB memory. The application fails in one regard.. when navigating to URLs ending in "pdf" e.g. http://www.adobe.com/education/pdf/cib/acro6/acro6_cib_16.pdf the error message: Acrobat Plug-in... could not fi
-
How to access access ViewRowSetImpl in executeQueryForCollection
Hi, I have lets call it a Bill of Matierial (BOM) VO that is backed by the database partially. I show this BOM in a treetable. Now for some line items in this BOMVO I want to get dynamically BomLineItems that donot exist in my DB but are in external
-
HT3354 How do i create a column with a percentage formula
Im really struggling creating a line of columns with different formulas. colin
-
BPC 10NW: Connectivity issues with environment copied from IFRS KIT
Hi BPC Gurus, We are on SAP BPC 10NW SP04. We had installed IFRS Kit. We then copied IFRS Kit (without transactions) to another environment (TBSC_DEMO). We have then modified members of all the dimensions and successfully processed it. We are trying