Can a Mac book pro USB2 be upgraded to USB3?

Hi,
I am wanting to upgrade my Mac Book Pro USB 2 to USB 3 but am not sure if this can be done? I have read somewhere that it is possible but the local store seems to think not. Any info would be greatly appreciated.
Thanks,
Graeme.

Welcome to the Apple Support Communities
It's not possible to change USB ports on a Macintosh

Similar Messages

  • Can my mac book pro's battery be damaged by charging it to much to often?

    Can my mac book pro's battery be damaged by charging it to much to often?

    no, but it will lead to you needing a new battery sooner. http://www.apple.com/batteries/notebooks.html

  • Can my mac book pro get the newest software? its on 10.6.8? I want 10.8.4?

    can my mac book pro get the newest software? its on 10.6.8? I want 10.8.4?

    Open the Mac App Store and try downloading Mavericks. If you're told the computer's incompatible, no.
    (93333)

  • Increasingly FCP runs to 104 degrees C when operating. This can damage MAC BOOK PRO RETINA components, shortening their life-span.

    Increasingly FCP runs to 104 degrees C when operating. This can damage MAC BOOK PRO RETINA components, shortening their life-span.
    Can you suggest what I should do apart from shutting down word documents and other software, Parallels, Windows 7 when using FCP?
    I am gravely concerned with this high heat. I have to use a remote keyboard it is so hot, but gravely concerned with with the damage the heat is doing to to MAC BOOK PRO RETINA.
    ironic - given I switched to Mac from PC this year JUST for  FCP editing.
    BTW - I am a film lecturer advising thousands of K-12 teachers and a have a report to deliver to the Education Department shortly.
    Please advise. Many thanks. Schbang

    You didn't mention what sort of work you're doing - if you're just cutting video this shouldn't happen.
    My suggestion would be to optimize all of your media to ProRes .
    Even though PR is a much larger file it's much easier on the CPU. Playing back compressed media is like rendering all day.
    I routinely use an old 2007 MBP with a core 2 duo and FCP7. I can cut and color correct with no problem at all using ProRes LT files. The only time it gets hot is during long renders.
    I have the laptop elevated on a pedestal that allows air to pass underneath . During long renders I  point a small fan at it which often cools it enough to shut the internal fans down.
    All that said, I know the retina is a more compact design and components are much closer to each other.
    So, I'd be interested to hear from another retina owner.
    Good luck.
    g

  • I have problems with my Mac Book Pro after I upgraded it

    I upgraded my Mac Book Pro from MAC OS X 10.9 to Yosemite version a week ago, and now it doesn´t start

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Can a Mac Book Pro playback 96K WAV files?

    Trying to listen to a 96K WAV file through the headphone output of a 2009 Mac Book Pro.  Does anyone know if that is possible?

    96K 24 bit.  I can play it back on my audio interface but I'm trying to find out if someone without an interface can hear an accurate version of a stereo song mix at that resolution.

  • HT201335 I have just bought Apple TV to be able to use from my Mac book pro  I have upgraded to OSX Mavericks but cannot get airplay symbol ? Any suggestions?

    I have just bought apple TV tp use with my Mac book pro  This has now ben upgraded tp mavericks 10.9.1 but i cannot get an airplay simble on my info bar? What am i doing incorrectly?

    You posted in the iPad forum instead of the MBP forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
    http://appletv2.com/airplay-icon-missing-ios-7/
     Cheers, Tom

  • HT4783 why can't I find airdrop on my mac book pro?  I upgraded to lion?

    I am trying to use airdrop but can't find it anywhere on my computer?
    Hardware Overview:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro2,2
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.33 GHz

    AirDrop requires a computer newer than your MacBook Pro: http://support.apple.com/kb/HT4783
    As I understand it the wireless hardware is the limiting factor.
    Macs that support AirDrop in OS X Lion
    If your Mac is the same as, or newer than, the models listed below, then it supports AirDrop.
    MacBook Pro (Late 2008 or newer)*
    MacBook Air (Late 2010 or newer)
    MacBook (Late 2008 or newer)*
    iMac (Early 2009 or newer)
    Mac Mini (Mid 2010 or newer)
    Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
    * The MacBook Pro (17-Inch Late 2008) and the white MacBook (Late 2008) do not support AirDrop.

  • Can the mac book pro play pc games

    I am planning on buying a new macbook pro and I was wondering if it will play pc games or do i have to get a mac verzion of them?

    Buy a MacBook Pro you need for everything else, I suggest a 15" antiglare or larger, this way your secure online and portable.
    Then for 3D PC gaming get yourself a Windows 7 gaming tower with a quad core i7 and expandable to 4-8 or even 16GB of RAM with a decent power supply, and where you can select from a veriety of the fastest video cards and of course all the latest games come out for Windows.
    A Windows tower like this should last you a long time as a gaming machine as you just switch out the video card every year to keep up with the latest 3D games and not becoming fragbait.
    Also most all games come out for Windows, use the Windows tower for gaming and offline uses, don't use it for anything Internet or file transfer related and it should remain secure. Use the Mac for all the risky stuff on the Internet, it's safer.
    With a MacBook Pro (or any laptop) as a 3D gaming machine, it lasts about a year and a half, then you start having to drop the detail to keep your frame rate up with improvments in the game. You can't upgrade a video card in laptops.
    The MacPro doesn't make a good 3D gaming machine as there are hardly any up to date video cards for it, you pretty much get what the machine came with and your stuck. (if your intersted, wait, they are due for a refresh)
    If you can't spring for both machines, then get a PS3/Slim for your HDTV and 3D game on that. MacBook Pro for other uses.
    As you can see with this chart, Windows towers blows away everything
    http://www.cbscores.com/index.php?sort=ogl&order=desc

  • Super slow usb transfers on non-unibody mac book pro after sl upgrade

    Anyone other experienced the slow usb transfer speeds on thier non unibody macbook pro (late 2008) after updating to snow leopard.
    I have done some testing using a sandisk cruzer 16gb on my non unibody macbook pro and there are transfer speeds super slow on the other hand with the exactly the same usb drive on my unibody I get the transfer speeds I expect.
    Is there anything to do? I've tried SMC & PRAM resets without any difference.
    Best,
    Max

       Start up in Safe Mode. http://support.apple.com/kb/PH18760
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
    Upgrading RAM to 8GB will help.
    Best.

  • Mac Book Pro hard drive upgrade, prices?

    Does anyone know how much im looking at for apple to upgrade the hard drive in my MBP from 500 gb to 1tb. i have only had the MBP 2 month but need more space

    Hi Joseph,
    Why not give the Apple Store a call? Also, it's very easy to upgrade the new MBP's HD yourself. Look in your owners manual or check out ifixit, powerbookmedic, macsales, youtube, etc.

  • DNP DS80 printer to Mac Book Pro via USB

    I have a DNP DS80 photo printer that I was told cannot be used with Snow Leopard because of the interface issue with USB devices on Mac Book Pro. I upgraded from Tiger to Snow Leopard recently, and after it the print link to Mac Book Pro was disabled. Can anyone help?

    Dave, Thanks for your kind reply. I found out that Apple does not support this printer yet. Meanwhile, I have to downgrade my OS from Snow Leopard 10.6.8 to Leopard version 10.5.6. I need help with this downgrading process because when I load the disk for OS 10.5.6 (Leopard) the message comes up telling me that I cannot load this software in my laptop (Mac Book Pro). I don't know if I have to erase Snow Leopard before loading Leopard, or do something else. I have to tell you that the Leopard disk did not come with Mac Book Pro (it's original OS was Tiger), it is the disk for my iMac G5 and I wonder if it can be used for the laptop. Can you advise!
    Gene

  • I am still running OS X snow leopard can my mac book handle the jump to yosemite

    I have not updated the OS X because I was comfortable with the set up and honestly too lazy to figure out the quirks of a new system.I am running Snow Leopard 10.6.8   Now my safari browser is completely out of date and I can't view any web pages.  Can my mac book pro 2 GHz Intel Core i7 with 4 GB 1333 MHz DDR3 handle the upgrade to OS X yosemite? Or will this just completely slow down the computer?

    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite - System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • MAC Book Pro with Retina

    I need to use Keynote on my MAC Book Pro 13 with Apple TV for meetings where network is secure and can't be joined. iOS8 allows an iPad to connect without joining if Bluetooth is switched on. Can the MAC Book Pro 13 do the same?

    It should, yes.

  • Do emirats apple store have 13inch Mac book pro with arabic keyboard in store?

    just wondring if I can find Mac book pro with arabic keyboard in emirates apple store.I tried to buy it from australia as am living there
    but they told me they dont have it avilabile with arabic keyboard anymore even if you want to order it online!so am coming to emirates for one day stopover and want to know if can find what am looking for in emirates store with arabic keyboard already printed on it?

    if you are coming to Dubai for a stopover. Then you might want to consider buying this from iStyle (Apple Premium Authorized reseller). because you just can pay and yake it right away. unlike online store where you want to wait like 5-8 days for delivery.
    I got my rMBP 15" with the Arabic/Enlgish Keyboard.
    iSTYLE - Dubai Mall
    Shop No.259, Dubai Mall, Dubai.
    Tel: +97144340440
    You may want to contact them.

Maybe you are looking for