Can be restore public folder

Please let me know if can be restore public folder on another exchange server.
I have DAG environment with one public folder. BY mistake user has been deleted their one sub folder from PF hierarchy. I tried to recover the data from recover deleted Item but retention period has been already left. Now I have
only one option to restore the public folder from the backup.
Now my question is can be restore public folder on another exchange server which is exist on same DAG environment. Or I need to build isolated exchange server to restore the public folder.

Here are your options:
http://blogs.technet.com/b/exchange/archive/2012/02/06/recovering-public-folders-after-accidental-deletion-part-1-recovery-process.aspx
http://blogs.technet.com/b/exchange/archive/2012/02/08/recovering-public-folders-after-accidental-deletion-part-2-public-folder-architecture.aspx
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Similar Messages

How can I restore a folder in SM35 - Very Urgent

Hi All,
How can I restore a folder in SM35 ?, because I created a folder in transaction AFAB and this transaction just process in background (under folder - SM35) and then I deleted this folder wrongly.... I tryed to execute again the transaction AFAB but it didn´t work, it means no folder was created...., the mesage is AA729.....
Thanks....
Edited by: Sandra Mota on Mar 7, 2008 8:26 PM

Hi,
Once you delete the session in SM35, it is not possibel to restore it back.
Check if you have also deleted the logs? Logs can exists after deleting the Session, provide you have not deleted the logs too.
It is not possible to create one more session using AFAB.
still if you want to do it, then in the selection screen at least change one of the parameter (Company code, Fiscal year, Posting period).
IF you still do not want to change the above input parameters, then there is another option, i.e. create a new assest and then run the AFAB with the radio button in REPEAT RUN.
Hope this is clear
BR
Sree

Can't access Public folder as guest

Since installing Leopard computers on the network will not connect to my Public folder as guest.
When trying to access the Public folder under 10.4 the "Guest" option is grayed out, although connecting as a user (entering user/pass) is possible.
When trying under 10.5, once I select the computer name from the Finder's window left menu "Connection Failed" appears on the dark-grey bar at the top. Still, like in Tiger, connecting as a user is possible, but when trying to disconnect by pressing the "Disconnect" button on top nothing happens. I get the same "Connection Failed" message and the user remains logged.
Where I may have messed up: I have 2 accounts in my computer (1 admin, 1 standard). I almost never use the admin account so I deleted it's Public folder from "Shared Folders" under Sharing in System Preferences. Then, on the standard account I deleted by mistake the "Staff" group from it's Public folder permissions. When trying to add "Staff" back, the option is not available.
All of that may have nothing to do with my problem, but I know very little about Unix, so who knows.
Any ideas as to why no one can access my Public folder as guest?

That would be in the case I wanted a Guest Account on my same computer to be able to access my Public folder. My problem is with computers on the network. Thanx anyways

Can't complete public folder migration, 2010 to 2013

So I've been following both these:
http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx
http://www.msexchange.org/articles-tutorials/exchange-server-2013/migration-deployment/migrating-public-folders-exchange-2013-part2.html
I've locked the 2010 PFs, nobody can access them. I've removed the preventcompletion flag in 2013, resumed the migration all according to the steps.
Get-PublicFolderMigrationRequest | Get-PublicFolderMigrationRequestStatistics -IncludeReport | Format-List
Shows no further activity any longer after some incremental stuff
Get-PublicFolderMigrationRequest | Get-PublicFolderMigrationRequestStatistics
Shows StatusDetail: InitialSeeding and PercentComplete: 95% and its not moving.
I've tried proceeding and removing the prevention from servering the hierarchy flag on my mailboxes. But it makes no impact on anything. The hold for migration flag remains true and the migration is not finishing.
What should I do?

Give it some more time. I don't know how much Public Folder data you have, but once the initial sync is done, it has to copy over the deltas to the mailboxes. I have seen this take some time. As long as it doesn't say failed, I think
you are in good shape :)

Reorganized Project Window (can not restore my folder structure)

Using CC2014 on an iMac running Yosemite. Haven't updated anything so not sure what the issue is but here goes.
I typically organize my project files, then all of a sudden AE changed my folder structure. In the Project window it created a Solids, Nulls & Solids, Compositions and AI & PSD folders. All of my comps are in the compositions folder. All Ai and PSD files are in the AI and PSD folder. However, I would rather have it organized my way. I can open a previous version of the file and my organization structure is how I want it. I tried opening AE and restoring the default preferences and that didn't restore my structure. Is there some auto organize shortcut I accidentally hit? Never ran across this issue in all my years using AE. Any help is greatly appreciated!

^This is what it organized everything as. If I open the AI & PSD folder for instance, all layers of imported AI files are in there. There are no folders within them to reflect the layers of a certain piece of artwork for instance.
^This is the hierarchy of the ones I created. All have sub folders and Comps.
^This is the scripts panel here.
Contacted Adobe, did a screen share with them. They couldn't figure it out either and have said they never seen the issue before. Not sure if it is a bug or what happened. They said they didn't have a shortcut for organizing the project window like that.

I selected display duplicates by mistake and can't restore my folder settings. How do I restore

I selected 'Display duplicates' by mistake and in the music folder list that's all it shows.How do I restore my settings on my i-Tunes folder?

At the bottom of the iTunes, centered in main panel will be a button that says Display All.
tt2

Can I delete the "Public" folder?

I'm wondering if I can delete the Public folder, or if I should refrain from doing so?
I've tried to figure out what the purpose of the Public folder is, but I'm not sure if I've understood correctly..
As far as I can see, it's there for other people to access the files within (which I don't find very comforting in the first place).
Since I have no use for sharing files with people this way, I figure I have no use for this folder either.
So, that's my reasoning for wanting to delete this folder.
Please correct me if I'm wrong.

Where the Public Folder comes in handy is if you want to share files between other users of your Mac. Normally, when you log on, you cannot access other user account's files...except for the Public Folder. If you are the only user, then even though you won't really take advantage of this feature, you really won't gain much from deleting it either.

How can i restore my purchase folder?

After initializing my new iPhone 4S and restoring my music and apps, I notice that my purchase fold is missing. How can I restore the folder and music?

You should probably contact the "official" Apple customer support. This is a user discussion forum. You can use the "Contact Us" link at the bottom right corner of this web page.

Public folder is not visible over office network

Small office, mixed network of about 8 macs and a pile of PC's. I'm not sure about the pc's but none of the macs can see my shared folder. They can get to my files by logging in as me, but not as guest. Nothing appears in the list of volumes when logging in as guest. Sharing is turned on. The public folder is set to drwxrwxrwx. The drop box is set to drwx-wx-wx. I tried to reassign it using the utility sharepoints, to no avail. Tried to assign it a new sharepoint using NetInfo Manager using this tutorial at macosxhints. and it also failed to accomplish anything. I am at a loss. I think it started happening after I updated to 10.4, but I am not sure, it has been going on for a long while now...
other possibly related wierdness: I show up in the terminal and some other network related places as one of the pc's on the network.
as in:
Welcome to Darwin!
lindsey:~ jesse$
Lindsey being the other pc user, Jesse being me.
Thanks for the help!
Dual 2.7 G5 Mac OS X (10.4.6)

Well, I'm tapped for now at least, with respect to things that I can remember seeing or reading about having caused this issue in the past. Just to recap to make it easier for anyone else that may see the thread:
The 'shareDir' property has a value of "Public"
The folder "~/Public/" exists
The permissions of "Public" are "777" (the default is 755 but the 'x' on "others" is what is important).
Filevault is not enabled.
Guest Access is enabled and is working because they can log on, just not choose volumes
Users can "see" the "Public" folder of a freshly created account.
The password has been updated to "Tiger" standards.
Since it works for the new accounts, the problem has to be something user specific, but it isn't any of the usual suspects, so I'm baffled. Just in terms of looking for anything unusual, these commands might turn something up (the 'ls' ones are repeated with 'sudo' explicitly to see if "root" sees things differently compared to other users because the AFP server runs as root):<pre>ls -lend ~
ls -lend /Users/username
sudo ls -lend /Users/username
ls -lend /Users/username/Public/
sudo ls -lend /Users/username/Public/
nicl . -read /users/username</pre>Another approach that might turn something up is to try to explicitly mount your "Public" folder from another Mac via the command line to see what errors are generated. For this, you will need an IP address for your computer to be entered in place of where it says "11.22.33.44":<pre>mkdir /Volumes/testguest
mount_afp afp://11.22.33.44/username /Volumes/testguest
or
mount_afp "afp://;AUTH=No%20User%[email protected]/username" /Volumes/testguest</pre>The other thing is that since the problem appears to be limited to your account, you could skip the troubleshooting and try setting up a "share point" somewhere outside your user's folder, such as in "/Users/Shared". If it works, then hopefully that can be used as a workaround for this most perplexing problem...

Any possibility to restore Public Folders when priv1.edb priv1.stm and pub1.edb pub1.stm files was moved?

Hello, good people
(I am sorry for my english)
introduction:
MS Server 2003, Exchange 2003, Eset Endpoint Protection.
We ned some free space on hdd.
taken steps:
1. Dismounted public and private stores
2. priv1.edb priv1.stm pub1.edb pub1.stm files moved to Z:\post (Z: - network drive on NAS)
3. was created new private an public sores.
4. mounted
results:
1. Some strange behavior in email flow - messages stucks in local delivey queue, does not reaches recipients,ect.
2. Lost folder "tree" in Public folders - i mean, now there is only one folder - Internet Newsgroup
Question:
Is there any possbility to "restore" public folder ?
thanks a lot.

Hi I agree with Belinda if the issue is used size on the server perform an offline defrag on all the original DB.
Have a look here for how to:
https://social.technet.microsoft.com/Forums/en-US/7bc0be32-584a-4940-a3ad-b56aa01a6b1f/exchange-2003-reclaim-white-space?forum=exchangesvrgenerallegacy
You should maybe talk to your storage guy to see if your NAS is compliant with exchange:
http://support.microsoft.com/kb/317173
http://support.microsoft.com/kb/839687
(careful:
Supportability
If you use Exchange 2003 incorrectly with a network-attached storage product, you may experience data loss, including a total loss of the Exchange database files.

Exchange 2007 Public Folder Database cannot be deleted

We are in the process of decommissioning exchange 2007 server from 2007 <-> 2013 coexistence.
All user MailboxDatabases have been sucsessfully removed, however PF Mailbox databases return an error.
“The public folder database 'Public Folder Database' cannot be deleted”
Object is read only because it was created by a future version of Exchange: 0.10 (14.0.100.0). Current supported version is 0.1 (8.0.535.0).
I am suspecting the presence for 2 OAB is the reason why we can’t delete Public folder database from 2007 server.
Get-OfflineAddressBook on 2007 returns
Name
Server
Versions
AddressLists
Default Offline ... ex07
{Version4}
{\Default Global...
Default Offline ... Offline Address ... {Version4}
{\Default Global...
Get-OfflineAddressBook on 2013 returns
Name
Versions
AddressLists
Default Offline Address Book
{Version4}
{\Default Global Address List}
Default Offline Address Book (Ex2012)
{Version4}
{\Default Global Address List}
Questions:
How can I check if both exchange servers are still OAB generation servers?
I am not sure if the previous service provider moved OAB, can I potentially cause any problems by executing
Get-MailboxDatabase | Set-MailboxDatabase -OfflineAddressBook "\Default Offline Address Book (Ex2013)"
Move-OfflineAddressBook -Identity "Default Offline Address Book" -Server EX13
3. Is it safe to delete 2007 OAB ?
Thanks

Default and System public folders show up under PF Management Console, however their preview pane on the right says "There are no items to show in this view" for both of them.
below is the output from Get-PublicFolderStatistics on ex07
Name                                     ItemCount
LastAccessTime
Marketing                                   479
1/4/2014 10:15:14 AM
Default                                  0
3/16/2014 1:34:35 PM
EX:/o=First Organization/ou=Exchange Adm 2                 3/13/2014 1:00:00 AM
inistrative Group (FYDIBOHF23SPDLT)
EX:/o=First Organization/ou=Exchange Adm 0                 3/13/2014 1:00:00 AM
inistrative Group (FYDIBOHF23SPDLT)
exchangeV1                               401
3/16/2014 1:34:35 PM
globalevents                             0
3/16/2014 1:34:35 PM
internal                                 0
3/16/2014 1:34:35 PM
Sales                                     713
1/4/2014 10:15:15 AM
microsoft                                0
3/16/2014 1:34:35 PM
OAB Version 2                            0
1/4/2014 4:09:49 AM
OAB Version 3a                           0
1/4/2014 4:09:49 AM
OAB Version 4                            0
1/4/2014 4:09:49 AM
OWAScratchPad{8382AFC4-6D63-4804-AC49-7B 0                 3/16/2014 1:34:35 PM
4FDA2A4514}
schema-root                              0
3/16/2014 1:34:35 PM
Accounting                                 953
1/4/2014 10:15:16 AM
StoreEvents{8382AFC4-6D63-4804-AC49-7B4F 0                 3/16/2014 1:34:35 PM
DA2A4514}
/o=First Organization/cn=addrlists/cn=oa 0                 3/13/2014 1:00:00 AM
bs/cn=Default Offline Address Book

Moving the public folder

Can anyone tell me if it's possible to move the public folder to external volume or make an external raid volume aceessible over an appletalk network???
Mac G4 Gray Mac OS X (10.4.3)

Can anyone tell me if it's possible to move the
public folder to external volume or make an external
raid volume aceessible over an appletalk
network??
Using sharepoints you can create a public folder anywhere on your mac. You can also setup an external volume as a sharepoint on your network.

Exchange 2010 public folder description property

In Outlook, if you display the properties of a public folder, on the general page is a field called "description".
In Exchange 2003 I waqs able to access this field using wmi and the microsoftexchangev2 object (comment field). This object does not exist in Exchange2010.
The description field does not appear in powershell commands get-publicfolder, get-mailpublicfolder or get-publicfolderstatistics.
I have been able to find this field using ldap in the "microsoft exchange system objects" container in a field called info.
Unfortunately, this field is not always populated. Out of about 6000 folders that have the description field populated, the info field is only populated for about 800.
So, my question is, is there a reliable place where the public folder description filed is accessible in exchange 2010?

Hi,
To manage public folders, we can use the Public Folder Management Console. But we can't use it to manage description field.
Based on my knowledge, I'm afraid there is no built-in Exchange 2010 tool or cmdlet to get the description field of public folder.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Public Folder Replication Status Error c105010f

Hi,
I am trying to migrate from Exchange 2003 to 2010. I am now moving the replicas. I am not able to open Public Folder Replication where it gives me the error :
An unexpected, unknown error has occurred. MAPI or an unspecified service
provider.
ID no: 8004010f-0000-00000000
ID no: c105010f
I have alreday search and a hotfix is available from the link http://support.microsoft.com/kb/885468/en-us but i am not able to apply the hotfix as the system i am running is newer than
the hotfix requirement. Any solution please help :(

Hi,
I have searched for the error message, and it points to corrupt public folder database for most cases.
So I would recommend you first try the Eseutil/Isinteg tool to repair the public folder database, for your reference:
http://exchangeserver.tumblr.com/post/44851518519/how-to-repair-exchange-databases-with-eseutil-isinteg .
If it doesn’t work, please per the link below to restore public folder:
http://technet.microsoft.com/en-us/library/bb123467(v=exchg.65).aspx .
Regards,
Rebecca

Outlook Public Folder access and permissions

How do I add an account to a public Folder and grant management permissions to that account?

Hi,
To add permissions for client users to access Public Folder content, we can use Exchange Management Shell to add it as what ManU PhiliP posted.
Alternatively, we can use the Public Folder Management Console to add public folder permissions for a client user. For detailed steps about this, please refer to the following official article:
https://technet.microsoft.com/en-us/library/aa998834(v=exchg.141).aspx
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

Can be restore public folder

Similar Messages

Maybe you are looking for