Can I add datafile bigger then 2GB

Hi all,
Can I add datafile bigger then 2GB (on the raw device) to the tablespace ?
I get err:
ORA-01119 : error in creating database file '/opt/DISK/data02'
ORA-27042 : not enought space on raw partition to fullfill request
Aditional information : 1
And
partition has size 4096543 kB
when I use partition with size 2GB it is Ok.
Is it limitation by Linux ?
I have linux 7.1
and oracle 8.1.7
What can I do ?
thanks
null

If you want to use raw devices with linux you have to use the utility 'raw' to map the device. You could also use the Logical Volume Manager (or both)
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Martin Silar ([email protected]):
I do not know where it is my problem.
I wont to create datafile on raw disk and
I wont to need raw disk with 4GB size, becose
I can not create more logic devices on my SCSI disk then 15 logic partition. Disk have 39GB.
I have problem with add raw datafile to tablespace.
Have you sambody idea ?
thanks Martin<HR></BLOCKQUOTE>
null

Similar Messages

  • I want to upgrade my Imac from Snow Leopard to Yosemite, but only have 1Gb RAM. Can I add RAM, then upgrade?

    I want to upgrade from Snow Leopard to Yosemite, but can't because I only have 1Gb Memory.  Can I add more memory, then do the upgrade? What should I buy?

    gwd440 wrote:
    Its older than I realised. Purchased in 2009, but is an early 2008 model.
    So I'm possibly aiming a bit high by going for Yosemite?  Would an earlier o/s be a more realistic option?
    On the RAM issue, I fully agree with what Etresoft has written. I have just visited various sites, including OWC, Mactracker and iFixit and your Mac seems to have the Penryn processor. It will address 6GB of RAM which is more than enough for your use.
    Where I differ from him, is Lion. The last big cat which I liked was probably Snow Leopard, and thereafter now Yosemite. There has been a lot of successes with your generation migrating to Yosemite, but with 6GB of RAM. Admittedly there were also problems for some, but I have observed even more successes even after initial problems. Mostly these problems were caused by adware or crapware installations. (Thank you Etresoft for a wonderful utility!)
    Your iMac also has a SATA interface for a 3GB SSD, which is good enough. We have a Mac here with the same interface, still with a normal conventional stock HD running Yosemite, but only 4GB of RAM and it is running fine.
    Of course the newer technology processors, faster RAM, PCI SSD, greater bandwidth on the newer Macs perform much better. But as I am on the older side, (ha ha), some of the 'vintage' Macs are still my favourites to use for certain tasks. Like using 9.09 for doing certain things and then converting the results afterwards for completion!
    But, once again, it is your decision and only you can decide as you yourself knows your own circumstances better. Weigh up the options, considering what Etresoft has pointed out vs what Yosemite offers ito continuous support, security and features. There are a lot of your type of iMacs out there, and some of the users spoke about feeling like having a new Mac. There were others, who were wailing though. You could of course, also follow the advice of a test installation on an external and testdrive it, or wait for the release of 10.10.2 which I read somewhere is eminently close?
    Have fun
    Leo

  • Apache 2.0.x and large file support (bigger than 2GB)

    I've seen on the mail list people complaining that apache 2.0.55 can't serve files bigger than 2GB.
    The sollution is to compile with this option:
    export CPPFLAGS="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
    (and this is default in 2.2.x)
    Now, an Apache compiled with those options is most probably not binary compatible with mod_php or mod_python or other out-of-tree apache modules, so they'll need recompileing too.
    Now, I've noticed that /home/httpd/build/config_vars.mk needs to be patched too, so that the php and python modules pick up the setting when compiled.
    You need to find the EXTRA_CPPFLAGS variable and add the two defines from above to it.. At the end it should look something like this:
    EXTRA_CPPFLAGS = -DLINUX=2 -D_REENTRANT -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -D_SVID_SOURCE -D_GNU_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
    BTW in lighttpd (well at least in 1.4.11) the --enable-lfs is enabled by default.

    I've seen on the mail list people complaining that apache 2.0.55 can't serve files bigger than 2GB.
    The sollution is to compile with this option:
    export CPPFLAGS="-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64"
    (and this is default in 2.2.x)
    Now, an Apache compiled with those options is most probably not binary compatible with mod_php or mod_python or other out-of-tree apache modules, so they'll need recompileing too.
    Now, I've noticed that /home/httpd/build/config_vars.mk needs to be patched too, so that the php and python modules pick up the setting when compiled.
    You need to find the EXTRA_CPPFLAGS variable and add the two defines from above to it.. At the end it should look something like this:
    EXTRA_CPPFLAGS = -DLINUX=2 -D_REENTRANT -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -D_SVID_SOURCE -D_GNU_SOURCE -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
    BTW in lighttpd (well at least in 1.4.11) the --enable-lfs is enabled by default.

  • HELP: can't create datafile.

    Hi, friends,
    I installed Oracle 10.2.0 one hour ago.
    Then I tried to create a tablespace.
    In this tablespace, I add one datafile, the size is 5GB.
    I used OEM to do this.
    But I don't know why the creating procedure still running.
    Based on my experience, it takes about 5 minutes to
    add a 5GB datafile into a tablespace. Now, 40 minutes has
    gone by, the program is still running.
    What is the problem?
    My system is Windows Server 2003, standard edition.
    Thanks in advance.
    Xiannian

    Hi, friends,
    I have a new finding about adding datafile to tablespace.
    I can't add any datafile to any tablespace to my H drive,
    either my created tablespace, or system-related tablespace,
    except the TEMP tablespace.
    That means, I successfully added datafile to TEMP tablespace with my
    H drive.
    But I can't add datafile to any other system-related tablespace, such as
    SYSTEM, SYSAUX, USER, etc with my H drive.
    My login has administrator previliges. I restarted the whole computer system
    There is no any help.
    Thanks.
    Xiananian

  • HT4890 My iCloud isn't showing any of my pictures.  How can I add them?

    My iCloud account does not copy any of my pictures.  When I log into in on the computer there is not a folder for pictures.  How can I add it?

    Then how are you supposed to transfer your pictures from your computer onto your iPhone?

  • Can't add new datafile into a table space?

    Hi, Oraclers,
    I am learning Oracle. I found one problem: I can't add new datafile to an existing
    table space. I tried to add via OEM and SQLPlus. None of them works.
    I can see that the datafile, say ras01.dbf, is in my hard drive. But I can't see
    it via OEM datafile.
    Also, this datafile creating procedure has never stopped. In SQLPlus, after I
    submitte ths statement, after 7 days, this sql statement is still running. The
    same thing happened in OEM.
    The sql statement is:
    ALTER TABLESPACE "RASBLK"
    ADD
    DATAFILE
    'H:\ORACLE\PRODUCT\10.1.0\ORADATA\NMDATA\RAKBLK35.DBF' SIZE
    26214400K REUSE AUTOEXTEND
    ON NEXT 2048M MAXSIZE 30720M
    Oracle is 10g V10.1.0.2.0
    os is Window Server 2003 Service Pack 1.
    What's the problem?
    Thanks,
    Message was edited by:
    shinington

    so you have definitely tried to use a Winlows Server with NTFS for a 1TB++ Database ?
    I never heard of that and I wouldn't even dare to dream of that, but as stated above theoretically (that is: according to MS) this should work.
    But surely your process has crossed some internal limitations, at least that is what it looks like.
    I guess you must go to your %ORACLE_BASE%\admin\%SID%\bdump or udump directories to eventually find a trace file there.
    recommendation is: move to some kind of bigger system (Solaris,AIX).

  • I have two apple id's one from my old laptop and one from my iPhone. I saved my iTunes library to my external hard drive and then tried to transfer it to my iMac. My music skips like a scratched cd now and I can't add any to my iPhone. Help please!

    I have two apple id's one from my old laptop and one from my iPhone. I saved my iTunes library to my external hard drive right before my old mac laptop died and then tried to transfer it to my new iMac. Now when I try to play my old music it skips like a scratched cd. Also, now I can't add any music to my iPhone unless it was purchased recently through itunes and downloaded through icloud. I tried to "Organize" my library in hopes of correcting the problem but my iMac just ejects my external harddrive part way through. Please help!

    Ejects the harddrive?
    Of what did your old Mac die?
    It sounds to me like you have some file corruption somewhere.  Either in the transfer of your library to the external or the external itself is flaky if it keeps ejecting.

  • ICal Lion is infuriating. How can I add a new event in a chosen calendar without having to create it in my default then edit it?

    iCal Lion is infuriating. How can I add a new event in a chosen calendar without having to create it in my default then edit it?

    We are all entitled to our own opinions. So I respect you there brother
    But then again, Apple has its own basis. iOS is what's selling like pancakes not Macs, so if the gazillions out there are using iOS device and have gotten used to the calendar in their iOS devices. Wouldn't you think it made sense if Lion has the same calendar look and feel?
    Everything was considered and weighthed when they developed Lion. They even mentioned it in the press, They were blown away with the success of iOS so they are extending it to OSX.
    Quite frankly, I like the old iCal but yeah I don't expect anything in SL to stay in Lion otherwise it'll be another Cat name related to Leopard
    People should start looking at this perspective and not get STUCK in the old OS.

  • I need to save an online file to my ipad and then email it as an attachment from my school email? It is my college gmail account and I can't add it to my mail app.

    I need to save an online file to my ipad and then email it as an attachment from my school email? It is my college gmail account and I can't add it to my mail app. This was an assignment for class to make sure we could use the BB email system.

    You can use your gmail account within the native Mail app using IMAP
    Make sure you've enabled IMAP in your main Gmail settings
    Open the Settings app on your device
    Tap Mail, Contacts, Calendars
    Tap Add Account...
    Tap Gmail
    Enter your account information, being sure to use your full Gmail address, including '@gmail.com'
    Tap Next
    Tap Save

  • I am unable to add contacts with their phone numbers. I add one press done and then it shows up but when I add another one the first one is deleted. How can I add them and make sure they stay.  Upper left hand corner there is partial circle w/ arrow

    I Unable to add contacts. I add one and then press done.  It shows up but after I add another one the first one is gone.  How do I save them?

    Hi,
    Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
    Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
    Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
    In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through.

  • I use aperture 3 since a long time. Using slit viewer, now the bigger image become bigger then the given space and shifted to the right, so that I can't see the complete picture anymore. And I also don't see the last few picture in the strip below. How ca

    I use aperture 3 since a long time. Using slit viewer, noe the bigger image become bigger then the given space and shifted to the right, so that I can't see the complete picture anymore. And I also don't see the last few picture in the strip below. How can I splve this problem?

    This lloks like your preferences file might have become corrupted.
    you probably have a problem with corrupted user preferences.
    Remove the Preferences: Remove the Aperture's user preferences from the User Library as described here:
    Aperture 3: Troubleshooting Basics   http://support.apple.com/kb/HT3805
    Note:Your User Library is hidden by default in 10.7.x or later - to open it in a Finder window use the "Go" menu from the Finder's main menu bar.
    Quit Aperture, if it is running. Log off and on again.
    Open the user library by using the Finder's "Go > Go to Folder" menu and hold down the options-key, until "Library" appears in the drop down menu. Select it.
    In the widow that will open, scroll down to "Preferences"
    From the "Preferences" folder  remove "com.apple.Aperture.plist".
    Then try to launch Aperture again.
    But deleting the "Preferences" file will cause Aperture to forget the preferences settings. Be prepared to have to reset all options you set using the Aperture Preferences panel.
    Regards
    Léonie

  • I have music files by the same artist but they are listed in itunes in more than one album hod can i add then to just one album pf that artist

    I have music files by the same artist but they are listed in Itunes in more than one album hod can i add then to just one album of that artist I am using windows 8.1 .

    iTunes will group songs into an album when:
    All songs have the same value for the Album and Artist field, or
    All songs have the same value for the Album and Album Artist field
    All songs have the same value for the Albumfield and the Part of a Compilation flag is checked.
    If you want to group all the songs by one artist into a single "album" you can do so by following one of these rules.  However, it may be more useful to create Playlists to group music like this and retain the original release information.  One Smart Playlist for each artist you're interested in would meet this need without over-writing information about the source albums.

  • How can I add three binary numbers and then convert to string (Hex format)?

    Hi All,
    I have my problem "half" resolved, but need some assistance on the final piece.  Overall, I need to take three string values (hex format), convert them to binary, add them and then convert back to a string (hex format).  If that doesn't make sense maybe this will:
    Final Result (My target) = 0xCC
     = 0x03 + 0x01 + 0x04
              = 0x03; 0011b
              = 0x01; 0001b
              = 0x04; 0100b
    For my app, we are dropping "masking" some of the bits so that we get 1 byte:
              = 0x03; 11b
              = 0x01; 001b
              = 0x04; 100b
    So...
    11001100b = 0xCC
    In my VI, I am taking each initial string [0x03,0x01 and 0x04] type casting them to U8.  Next I need to "mask" the binary values as shown above and then add them.  I am not sure how to do this in LV??
    Thanks for the help,
    Bryan

    Hi Bryan,
    there's a conversion palette in the string palette, ever looked at those functions?
    The rest is pure simple math:
    It's the straight-forward way, there are other possibilities too!
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • User can not add more then two products against one order

    Hi frnd,
    My requirement is in CRM while creating order using CRMD_ORDER transaction. The user can not be entered more then two products against one order.
    I am using CRMD_ORDERADM_I_BADI badi to give error I am unable to use this badi. Is there any other options are there.
    Please do need full help.
    Regards,
    Ashish.

    Hi Amit,
    DATA: gt_header TYPE crmd_orderadm_h. "OCCURS 0 WITH HEADER LINE.
    data: ET_PRODUCT_I     TYPE     CRMT_PRODUCT_I_WRKT.
    data: gs_PRODUCT_I     TYPE     CRMT_PRODUCT_I_WRKT.
    DATA : gt_header_guid     TYPE     crmt_object_guid_tab.
    DATA : gs_header_guid     TYPE     crmt_object_guid.
      gs_header_guid = IV_HEADER.
    *INSERT gs_header_guid INTO TABLE IV_HEADER.
      CALL FUNCTION 'CRM_ORDER_READ'
        EXPORTING
          it_header_guid       = gt_header_guid[]
        IMPORTING
          ET_PRODUCT_I         =   ET_PRODUCT_I[]
        EXCEPTIONS
          document_not_found   = 1
          error_occurred       = 2
          document_locked      = 3
          no_change_authority  = 4
          no_display_authority = 5
          no_change_allowed    = 6
          OTHERS               = 7.
    endmethod.
    I am using ds code. Its working fine records are coming in Product. But how i will save product into one
    itab.
    Regards,
    Ashish S

  • PB creation datafile greater than 2Gb

    Why is it not possible to create a file greather than 2Gb on
    oracle 7.3.4.0
    and solaris 2.7???
    I have created the same architecture on SCO openserver 5 and HPUX and it 's
    working????
    Could you help me please???

    In "earlier days", filesystem were limited to a maximum file size of 2 GB. Today that limitation has almost gone away.
    What filesystem do you use for those datafiles? Both, VxFS and UFS can handle bigger files. It seems to me, that you upgraded the database from an earlier version (might have been 7.x or 8.x) and for compatibility reason the upgrade put that limitation in your init 2 GB it´s safe to change that parameter and add a bigger sized file.
    Markus

Maybe you are looking for