Can I put a 7200 rpm drive in a 13" MacBook Pro?

I'd like to upgrade my daughter's 13" MacBook Pro after she buys it to a 500GB 7,200 rpm hard drive. Apple only offers a 5,400 rpm drive as an upgrade. Any technical issues keeping me from going to a faster drive? Is the drive in a new 13" MacBook Pro easily accessible for swapping out? Best to ask before I buy.
Thanks.

Yes, you can put a Seagate Momentus 7200.4 in there. It's considered a user-replaceable item, and there are instructions in the manual.

Similar Messages

  • Stop the beeps with the 7200 rpm hard disks of the MacBook Pro

    http://www.hardmac.com/news/2009/07/13/stop-the-beeps-with-the-7200-rpm-hard-dis ks-of-the-macbook-pro
    Stop the beeps with the 7200 rpm hard disks of the MacBook Pro
    from HardMac.com by [email protected] (Lionel)
    At the beginning of week, we have spoken about the unpleasant beeps made by the 7200 rpm hard drive proposed as an option in the MacBook Pro 2009.
    A solution has been found, the details are given by Rémy.
    These tedious beeps occur when the disc is inactive and are caused by a system
    to reposition the play-back head carried out in a repetitive way.
    In addition to the beeps of the hard drive, Mac OS X displays the pretty multicoloured wheel during some seconds while waiting for hard drive to finish these loadings and unloadings of the play-back head.
    The solution comes with a utility of the name hdapm (for Hard Disk Advanced Power Management) which makes it possible to change the level of energy management (APM) of the hard drive.
    Hdapm can be downloaded from : http://mckinlay.net.nz/hdapm; hdapm being a command line utility, it is thus necessary to use the Terminal (which is in /Applications/Utilitaires).
    After copying hdapm into your user file, the command to enter is:
    sudo ~/hdapm disk0 max
    disk0 corresponds to the disc to regulate knowing that hdapm should function with any ATA disk supporting APM
    max is the level of APM which is a number ranging between 1 and 254 included
    the word following are preset and can used in the place a number for the level of APM
    max (maximum performance) is the parameter to use to eliminate the “beeps”.
    min (maximum economy of energy)
    default (returns to the default setting)
    The level of APM is a temporary adjustment in the firmware of the hard drive, this adjustment is lost when the disk is powered down and it is thus necessary to redo this at each for each start up.
    To install hdapm so it is launched at each start-up, it is necessary to copy hdapm to the hard drive (/usr/local/bin is advised) and to copy the file hdapm.plist in /Library/LaunchDaemons.
    It will be can be necessary to you to edit hdapm.plist with the desired parameters; the default settings are: the repertory where hdapm is /usr/local/bin, the hard drive is regulated on the first (disk0) and the level of APM is the maximum.
    You can simply copy the file hdapm into /usr/local/bin file if you want to avoid modifying Plist.
    Simplest way to reach these files is to use the Go/go to the file and to copy/paste this address before validating.

    Yeah, I don't buy that. I spoke with Seagate a couple of months ago when I was looking for the impossible to find 500 GB 7200 RPM HD and asked them that very thing. They told me it would work fine, but I should disable SMS. Apple told me the same thing. I ultimately waited and got a non G-Force model, but Seagate told me it would work.
    I also don't believe that they'd OEM the drive to Apple knowing it wouldn't work. That makes absolutely no sense. If Seagate knew the G-Force drive would not function properly in an Apple MacBook/MacBook Pro, and they OEM'd it to Apple for that purpose anyway, what does that say about Seagate?
    I admit it's odd that the used the G-Force model given the presence of SMS, but apparently Seagate has prioritized the manufacturing of the G-Force drives and probably offered it to Apple.

  • I can't put my finished iMovie and ppt from my macbook pro to iPad? Why?

    I can't put my finished iMovie and ppt from my macbook pro to iPad? Why?

    You need to buy a Mac OS X 10.6 DVD.
    (92312)

  • Can I fit any 2.5" drive to my 2009 MacBook Pro please?

    Hi
    My Pro's hard drive is failing badly and I need to order a new one urgently. Will this drive work please:
    http://www.amazon.co.uk/Hitachi-Travelstar-1000GB-Internal-Drive/dp/B007Y4BOH8/r ef=sr_1_26?s=computers&ie=UTF8&qid=1385257684&sr=1-26&keywords=2.5+sata+hard+dri ve
    Thanks
    Rich

    Yes, any 1TB 2.5" Hd will work as long as its 9.5mm thick
    STAY AWAY from western digital.    Your Hitachi 7200rpm is the best money can buy.
    Ive replaced many macbook internal HD,   yes, that drive will work with 100% certainty
    here is same with free shipping $92 US
    http://www.ebay.com/itm/Hitachi-Travelstar-7K1000-1TB-7200rpm-SATA3-2-5-Hard-Dri   ve-HTS721010A9E630-9-5m-/281212501042?pt=US_Internal_Hard_Disk_Drives&hash=item 4 179923c32
    same for your country:  £63.99
    http://www.amazon.co.uk/HITACHI-0S03381-Travelstar-7200rpm-Internal/dp/B00C02PCN 6/ref=sr_1_2?s=computers&ie=UTF8&qid=1385264648&sr=1-2&keywords=hitachi+7200+rpm +1tb

  • How can I connect my existing firewire drives to the "new" Macbook pro

    I'm thinking about getting a new Macbook Pro, to take on the road.
    I already have four external drives with firewire and USB 2.0 ports.
    After I looked at the new machine I noticed it only had USB 3.0 and Thunderbolt ports.
    I dont see any Firewire to Thunderbolt technology out there nor do I see any  USB3.0 to anything technology. How can I connect my drives to the new system?

    You can use the USB3 connections for USB2.  That's downward compatible.  Just runs at USB2 speed.
    Just this week apple announced a couple of TB adapters, TB-to-ethernet and TB-to-firewire.  But the FW adapter is not at the apple store as yet (at least at the time I am posting this).

  • Can a LG Portable super multi drive GP10 work on macbook pro?

    Can a Lg Portable super multi drive GP10 work on a Macbook pro?

    yes.
    Complete Compatibility
    As GP10 portable drive series perfectly supports both Mac OS and windows OS you can use it regardeless of the OS of your PC
    http://www.lg.com/lb_en/it-products/dvd-blueray-drives/LG-GP10.jsp

  • Can I replace a failed hard drive on mid 2009 MacBook Pro with 1tb ssd +hdd?

    Any help?

    You might be able to.
    Check either Macsales.com or iFixit.com for guides of how to add a second drive to your 2009 MBP.
    I know that the SSD needs to be placed in current HDD bay and the HDD needs to be placed in the optical drive bay. So you would need a dual drive kit from either of the places mentioned above.

  • Just bought a airport time capsule because my mac book pro start up disk is full. How can I put stuff onto the airport now from the MacBook Pro to free up some space?

    http://www.prking.com.au/Products/StairLifts/StannahStairliftsCurved/Description Features.aspx

    Yes, look in your Finder's sidebar under Shared, you should see the TC there. Connect to it using whatever password you set up when you first configured the TC, and then you can move files into the shared volume.
    Don't forget that only one copy of a file is not a backup, so ideally you would have a second copy of your files somewhere else.
    Matt

  • No 7200 RPM Drives on 15" MBP?

    I was disappointed to see no 7200 RPM drives are offered on the new 15" MBP. I was poised to order a MBP with 7200 rpm drive when the new Core 2 MBP was announced. The 7200s are available on the 17" MBP. Is there a shortage of 7200 RPM drives?
    20" iMac   Mac OS X (10.4.8)  

    That's their choice, you can always buy a 7200 RPM drive if you want to and put it in yourself, though if you make a mess, don't expect Apple to fix it! Some authorized service centers may do the installation for you. As has been noted on other threads, the 5400 RPM drives have narrower tracks which means they are almost equivalent in speed to 7200 RPM drives that exist. The speed of the drive is not only based on RPM, but actual ability to access data.

  • Can i upgrade to a 7200 rpm drive?

    I have a mid 2009 mbp with 5400 sata drive. Can I replace the drive with a 7200 rpm? Any problems that may arise? Possible faster battery drain? Any help is appreciated, thanks

    Certainly in theory the faster drive should consume more power than a slower one but there is the offset that It should retrieve data faster thus work for a shorter period of time.  If that balances out, I can't say with authority.  I have a 7200 RPM drive in my MBP and have noticed no change in battery life.  There may very well be, but it certainly is not dramatic.  shldr2thewheel's guess may very well be correct.
    Regarding performance, Allen Eckert is correct, there has not been a dramatic change that I have noticed.  If you want noticeable speed increase, SSD is the answer.  It will not only increase performance but also decrease your bank account.
    I'm a third vote that no harm will be done and you may get some benefits.
    Ciao.

  • Why no BTO option for 7200 RPM Drive in 13" MBP???

    There is no BTO option for a 7200 RPM drive in the 13", but there is for the 15" and 17". Does this mean they won't fit/work in the 13", or is Apple just not offering it?
    Thanks..
    Message was edited by: solsun

    It means Apple is not offering it. There are 7200 rpm drives with the proper form factor (9.5 mm height). The heat difference is not significant. As I recall, when the MBP line first came out, 7200 rpm drives were available on the 17" MBPs, but not on the 15" models. You can't get a new 13" MBP with anything faster than a 2.53 GHz CPU, either - it's just a differentiation point. You can get the stock capacity drive on the 13" MBP, and put in a 500 GB 7200 rpm drive yourself.

  • 7200 RPM drive versus 5400 RPM drives

    I'm about to invest in my next laptop and have the following impressions:
    7200 is generally faster for sustained reads/writes and seeks.
    7200 uses marginally more power (0.5 watts) - but is not going to be noticable in terms of heat or battery life (spin down, CPU, lighting are the big draws I presume there)
    What I haven't seen is any comment on noise levels. Has anyone experience or data from the OEM to compare noise levels/frequencies for whatever drives Apple seems to ship these days?
    Thanks!

    Hi, don't know if this will really answer your question but my new MBP just arrived Monday with a 100GB, 7200 RPM drive. I definitely notice the improvement in access time. Noise? I cannot tell the difference, its as quiet as a mouse. Drawing a bit more power but it is negligble. If you can swing it, I would recommend the 7200...Too bad you can't order it in a larger drive size though. 120 would have been nice
    dave

  • Question for folks using 7200 rpm drives

    Hi, for anyone here using a 7200 RPM drive in their macbook, can you post your experience regarding vibration felt on the palmrest and also what brand drive you have.
    I just installed a WD Scorpio Black (320GB 7200) and it produces enough vibration on the palmrest to be annoying. The stock Fujitsu produces absolutely none. I am going to return the WD and either get a different brand, or get a 5400 RPM.
    Thanks for any feedback.

    Hitachi Travelstar 7K200 200GB. I've had it since last January. Never a noticeable vibration, although the sound of the bearings/platters spinning seems to have increased recently. I don't find that unusual since that's typical for any hard drive.
    The hard drives don't typically produce noticeable vibration unless they're loose. Have you checked to see that it's secure in the drive bay? I've heard that sometimes the little shock-absorbing "bumpers rails" in there can get dislodged in the installation process.

  • FireWire / MacBook Pro / External 7200 rpm Drive / External Power Supply / Daisychaining

    I would like to use FireWire from my MacBook Pro to an external 7200 rpm drive (Fantom GreenDrive Quad with FireWire capability) that uses an external power supply.  Are there any issues with using the external power supply?  I read in an archived Mac forum regarding Thunderbolt that there might be (for Thunderbolt, which I'm not using).  The archived info wasn't entirely clear to me as to whether it meant not to power up (turn on or plug in) an external power supply for a daisychained device while the MacBook was on or the daisychain had devices in use, say, or whether it meant don't use (daisychain) any devices that use external power supplies.
    Once that question is resolved (about FireWire relative to the external power supply for the external hard drive), my next question is, Can I safely daisychain also? If so, what protocol would I use for that, relative to the power supply for each daisychained hard drive?

    I have had no issues using daisychained FireWire 800 external drives with leaving the drives turned on, power supplies on, and restarting my MBP.  The MBP starts up and sees the drives and runs fine.

  • 7200 rpm drives?

    I noticed that you can no longer custom configure a MBP with a 7200 rpm drive? Did Apple drop this drive? Also is the performance significantly better than the 120 gig 5400rpm drive that comes standard now?
    Thanks,
    Jason

    Hi Cheers,
    The 120GB is a lateral data drive, and the 160GB and the 200GBs are perpendicular drives. The 120 runs at 5400rpm as does the 160, but the 200 is at 4200. Some say that because of the way data is read and written to these new perpendicular drives they're actually faster, or at least equal to the faster spinning drives that use "older" technology.
    Here is a blogger comment......
    There has been a bit of criticism of Apple's failure to provide a 7200rpm option in the new model. But I had guessed that the 160GB option at 5400rpm would use perpendicular technology. By closer packing of the bits, this actually means the 25% slower rotation is essentially negated by the being able to read more bits. While I don't have the data to prove it, I would imagine a 5400rpm 160GB drive would perform not far off a 100GB 7200rpm drive for most situations.
    Well, I'm pleased to report that the drive in this model is a Hitachi perpendicular device, and it's XBench disk scores were considerably better than my 1 year old Seagate 120GB 5400 rpm disk (which itself was well-reviewed). While some of the difference is undoubtedly down to my disk being much fuller than the MBP, I'm sure the Hitachi performs admirably indeed. Sure, if someone made a 7200rpm 160GB disk, that would be great. But right now, I don't think they do. So, with the 160GB I think most people will be happy, and it would make sense for Apple not to offer a lower capacity 7200rpm drive. (Not sure about the 200GB 4200rpm drive though.

Maybe you are looking for

  • IMovie not recognising Data Video DAC AV/DV converter

    I use my DataVideo Dac-1 to capture old VHS family movies. Drop them into iMovie edit and make short DVD's. The system worked a treat with our old G4 and Panther. Have just bought a dual G5 2 Gig machine & iMovie HD. The system is not seeing the DAC

  • How to do manual iPad update???

    My in-laws are fully dependent on their iPad to the point that the laptop they own very rarely gets turned on. This causes a separate issue to the one raised in this post in that when I visited them last week their iPad had not been backed up and syn

  • My creative Zen 20gb not work

    Hi I have got Zen touch 20gb. Once I was adding new music to my player. Suddenly a little window shows up with text that everydoby knows 'serious problem has occured'. Since then my player stopped working. I can't turn it back on!!!! Did somebody hav

  • Why is my service disabled?

    i want my line back and running. I have a block on data overage not disable my service. >> Personal information removed to comply with the Verizon Wireless Terms of Service << Message was edited by: Verizon Moderator

  • Exit EXIT_SAPLMEREQ_003 - VERY VERY URGENT

    Hi experts, i have implemented the exit EXIT_SAPLMEREQ_003 and i used this code: call method im_req_item->get_data   receiving     re_data = st_eban. move: eban-zzrmm_attr_rda to st_eban-zzrmm_attr_rda,       eban-zzrmm_cdc_stat to st_eban-zzrmm_cdc_