Can several users post on the same blog (SLS 10.6.2)?

On Snow Leopard Server 10.6.2 a user (let's say user A, defined in open directory) can have it's own blog. Is there a way to allow another user (user B, defined in open directory) to post entries on user A's blog? Or can I setup a company's blog where serveral users belonging to one group are allowed to post on?
Best regards,
Christian

You have to setup a new wiki collaboration page, activate the blog function for that wiki (settings in the web interface, on the wiki home page).
Then you have to add users and/or groups that you want to give access to in the settings (also in the settings inside the wiki interface, once you have created the wiki).
You can also activate the group calendar for the new wiki, in the settings page, so that you get a web calendar for the wiki.

Similar Messages

Is it possible for several users to share the same user ID and password?

Is it possible for several iPlanet Calendar Server users to use the same user
ID and password and to use the same calendar to make changes? If this sharing
is possible, are there any limitations for multiple users updating the same
record, and does any database locking take place?
Yes, more than one person can use the same user ID and password and update the
same record. The database code uses the First In First Out(FIFO) rule, where
only one person updates a record at a given time. So, if two users are
updating the same record, the changes made by the user who updates the record
last will get written to the record.
<P>
If the deployment requirement specifies a shared calendar, where users do not
have their own users IDs, you can set an appropriate Access Control List(ACL).
It is also possible to make the calendar publicly writable.

Hi matrixxzero,
In my opinion, you want to use the same Apple/iCloud/iTunes ID on both devices. That is exactly what iCloud is designed for - to keep devices with the same Apple ID in sync. Your Mail, Contacts, Calendars, Reminders, Safari Bookmarks, Notes, Photo Stream photos, and Documents will all be kept in sync if you have those options set up on both devices under Settings>iCloud.
Unless you have some reason to not want to have the same information on both devices, then going with a single ID on both is the way to go.
Cheers,
GB

Can multiple people post on the same shared photo stream?

Is there a way to have multiple people post on the same shared photo stream?
My cousin would like to have a single shared photo stream where we can both post photos on it and comment, instead of having two separate shared photo streams.
We think that there should be an option for the album creator to give access to anyone he/she shares it with to enable them to also post pics on the same stream.

The only link I have is to manage your team account http://forums.adobe.com/thread/1460939?tstart=0
The only Adobe program/process for team work that I know of is Adobe Anywhere, but that requires a very different process
Adobe Anywhere http://www.adobe.com/products/adobeanywhere.html
http://www.creativeimpatience.com/adobe-anywhere-enterprise-solution/

Mac on Windows SMB Share- IDLK files disappearing allowing several users to access the same file

Hi,
We have a volume licensing agreement with Adobe and have around 16 Adobe CS6 licenses all used on Macs. The network is based around Windows servers and shares which the Macs connect to via an SMB connection to the server. The issue we're having is that when an InDesign file is opened, sometimes it will not create an IDLK file (or sometimes it will create one but it will disappear seconds later) and it allows several people to view the same file at the same time. Obviously two or more people working on the same file can, will and has caused issues with overwriting documents without knowledge of doing so.
Has anyone else encountered this or have any ideas as to what might help us resolve this issue?
Thanks

When you open a file from a previous version (you'll see converted in
the file name) there is no CS6 file in existence, yet. Once the file is
saved as a CS6 file, the lock file is created. The whole procedure is
designed so that you must make a fully conscious decision to overwrite
the old version file with a new one.
This is no different than creating a new document that hasn't been saved
yet.

Several user status at the same time

Hi Export,
As I found, we can only choose one status from the list in WBS. Is there any config can make it possible to select multi status in one time?
Thanks,
Liang

Hi
yes you can select more then one user status at the same time
For example you create user status like this in OK02
1     INIT     Initiative
2     DRPR     Draft Proposal
3     PLAN     Fully planned & costed
4     AFEA     502-Approved
5     RELE     Released for execution
6     HOLD     On hold
You can select the user status from the above list
If you set the Initial status flag for the user status
If a status is marked as an initial status, it is automatically activated in an object when the object is created
Thanks
S.Murali

Can two user accounts on the same mac share the Address Book

My wife and I have separate user accounts on the same Mac but we would like to share the same Address Book. I have searched the forums to no avail. It seems silly to use .mac to do so, and a needless expense when the information is already on the same computer.

David M.F. Chapman wrote:
My wife and I have separate user accounts on the same Mac but we would like to share the same Address Book.
That's not possible. you have to use Mobileme if you want to share the address book.
I have searched the forums to no avail. It seems silly to use .mac to do so, and a needless expense when the information is already on the same computer.

Can Multiple users work on the same work Repository ?

I have master repository and work repository on one machine, can multiple developers connect andwork on the same work repository? how?

oh Yes!
it is v simple.
follow the steps:-
once master and work repository has been created on a system.U just need to know all the information supplied wen creating a login to designer.
like user name and password of database,url,driver as well as master's repository uname and password.
if u have the following information with you,then u can create a new login with designer provided all the above information and u will have full access to designer
in work repository u want to connect

How can different users spool to the same file?

I am using SQL*plus for 10g db. I am spooling query output to a file. Query should be run and spooled multiple times overwriting previous output.
here is the main piece from the query.sql file
SPOOL output.txt
SELECT....
SPOOL OFF
Let's say user Dan runs this query for the first time. An output.txt is created. Dan can run the query multiple times and each time new data is spooled to output.txt. Now Mike is trying to run this query. Nothing happens!
++I thought the issue has to be with file permissions. However, the issue remained after I gave ALL permissions (a=rwx) to both files: query.sql & output.txt. Funny thing is that I created query.sql and now I (or any other users, except Dan) cannot run it.++
Thank you!

No it does not show any error. I'll go back to the technique used in this organization - capturing output through trace (funcation of the virtual terminal). Thanks anyway.

How far will the extreme reach and how many users can be on there at the same time?

How far will the airport extreme reach and how many users can be on there at the same time?

Last question first, since that is the easy one......approximately 50 (fifty) users for wireless depending on how active each user might be.
The first question is much more difficult, as distance is not really the issue with wireless.....obstructions are the issue.
A wireless signal can easily travel 300 feet or more with no obstructions in the signal path.
But, a typical wall of sheetrock or wallboard in a home will absorb....on average....15-20% of the wireless signal. Brick or adobe will obviously absorb much more. A ceiling....because it is thicker....will absorb about 25-35% of the signal.
So, if the wireless signal must pass through several walls and a ceiling, there won't be much, if any, of the signal left....even though the distance that the signal travels is not great...for example, 20-25 feet.
Other wireless networks around you at the neighbors can also affect the relative strength of the wireless signal.
The bottom line....locate the AirPort Extreme where wireless devices will receive a signal with the least amount of obstructions in the signal path. Your actual performance cannot be predicted in advance. You will not know how well the AirPort Extreme works for you until you try it out in your home.
If you find that the signal does not reach as far as needed, you will need to add additional "extenders", like an AirPort Express to provide more signal coverage.

Can the SidHistory attribute be moved from one User account to a different User account in the same Forest/Domain?

Hello,
Can the SidHistory attribute be moved from one User account to a different User account in the same Forest/Domain manually with Active Directory Users and Computers or with something like Powershell? it would seem to me this is a safe operation.
Thanks for your help! SdeDot

Hi,
In addition, please also take a look at the below thread:
copy SIDHistory from one account to another in the same domain
http://social.technet.microsoft.com/Forums/en-US/2ca8727c-b3fd-4ef8-9747-99295f0cd61c/copy-sidhistory-from-one-account-to-another-in-the-same-domain?forum=winserverDS
Hope this helps
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Siebel Remote - Can multiple disconnected users be on the same laptop?

Has any open come across the following requirement? I have a customer that is interested in 'sharing' laptops with multiple offline users with the ability to sync. Can we have multiple disconnected users on the same laptop? If so what would be the options? The challenge is how to manage multiple extracts on one MWC installation. I suspect that 'OOTB', we only support one extract per machine/installation of the MWC. We may be able to support multiples, but it would take some config/customization.

Please don't post the same question in different forums
Siebel Remote - Can multiple disconnected users be on the same laptop?
multiple disconnected users on the same laptop
Siebel Remote - Can multiple disconnected users be on the same laptop?

Can itune and ipad have the same user name?

Setting up new ipad, can ipad and itunes have the same user name being my email?

What do you mean by "user name"? They can, probably will, use the same iTunes Apple ID, if that's what you're asking.

How can i share photos on the same mac but different users?

how can i share photos on the same mac but different users? we have different iphoto acounts and just want to be able to look under users in the finder and view another users iphoto.

You may try moving ur librarie to the folder /Users/shared if and link it to iphoto from there
You may locate and link libraries from arkiv-->change library in iphoto

I have an iMac with OS Lion. The Smartart feature for Office for Mac will not work when I am logged on to my personal user account. It works with other user accounts on the same computer, and it works after "safe start". How can I fix the problem?

The Smartart feature of Office for Mac will not work in my user account. It works for all other user accounts on the same computer, and it works after a "safe start". How can I fix the problem?

You may also want to search/ask in the forums run by the people who make the product which is causing you problems:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011

How can I transfer a local mailbox to another user account on the same computer?

I have two user accounts on the same computer. I actually never really wanted two accounts, but a second one was generated when I chose to use the Migration Assistant to transfer my account from a previous computer to my current one, and I never did anything to delete the second one. Anyway, I have been using Mac Mail to view my work email messages from a Microsoft Exchange server. Awhile back, I was running out of space on my mail server, and decided to download a bunch of my email messages to local mailboxes in order to free up space.
Recently (for reasons that are not terribly relevant) I have decided to switch between the two user accounts on the computer. I have transfered all of my documents, apps, etc. to the new account. However, I haven't been able to find a way to transfer all the email that is in those local mailboxes, so that they are viewable/usable in the new account. Could somebody suggest the best way for me to do this? I am no longer going to use the old account, so the two do not have to be synced. I just want the mailboxes to be available for the new user account (with the same organizational structure).
I am currently running Mavericks (just upgraded last week).
Thanks,
JEG

A quick update....
I copied the folder in ~Library/Mail/V2/Mailboxes that contains all of my local mailboxes over to the same location in the new account. When I go into mail, the entire file structure is there, however it does not let me view (or search) any of the messages. The messages can be accessed through the Finder, though.
I tried to "Rebuild" the local mailboxes, but it didn't seem to do anything. Any advice would be appreciated.
JEG

Can several users post on the same blog (SLS 10.6.2)?

Similar Messages

Maybe you are looking for