Can't access web site

I am trying to access a web site that I normally have no problems accessing. Now Safari tells me:
Safari can't find the server
Safari can’t open the page “http://www.xxxx.edu/” because Safari can’t find the server “www.xxxx.edu”.
We are using an apple time capsule and no device on the wireless network can open the above web site. We asked a friend to log on and they had no problem accessing the web site.

Hi,
Check Network pane in System Preferences. Select the Proxies tab.
If there are any boxes selected on the left, deselect then quit Safari. (Command + Q)
You can also access that information from System Preferences - Advanced. Click the *Change Settings* button.
Relaunch Safari.
Carolyn

Similar Messages

  • How can i access web sites configured for internet explorer?

    I try to access web sites thatwork with internet explorer from my mac and cannot load the home page.  How can i access these pages?

    Not sure if you're using a different browser than Safari. If not try Firefox or Chrome.

  • Safari Mac can't access web site that Windows can

    None of my Macs can access the site http://cards.123greetings.com . I get Can't Find Server messages in both Safari and Firefox. (Clearing caches doesn't help)
    cards.123greetings.com is part of a large free card site that did a major upgrade in October. It still renders correctly on a PC running Windows XP Home which runs on the same network as the Macs, so it's not an isp problem.
    Since both Macs (G4 iBook running 10.3, MacBook running 10.4) have the same Can't Find Server problem with both Safari and Firefox, it appears that some setting in the Macs themselves is causing this.
    Any help or insight would really be appreciated - Thanks!

    A big Thank You to Mulder for letting me know that you can access the site (with Mac Safari I presume) - That's good news.
    The bad news: I still can't access the site.
    The problem affects two separate computers and four browers. Taking your advice, I repaired permissions and logged in as a new account on both machines. Unfortunately that didn't work.
    I next tried accessing the site on the MacBook through Parallels running Windows XP Home. The site came up fine using Internet Explorer.
    Then I realized that Parallels operates with a different ip address. So I went back on the Mac using a proxy, and the site came right up.
    It now seems that the ip addresses of both computers are being blocked at some level. I want to thank Mulder for replying and virtually ruling out that it might be a Safari issue. I'm now "off topic" and will no longer post in this section. But I'm also over my head... If anyone has advice about how to proceed now, I'd truly appreciate it.
    Thanks!

  • Latest version of Firefox (version 32) can't access web sites. Using Windows 8.1 Compatibility problems?

    Firefox automatically updates to the latest version which is now version 32. I get the following error message: "Firefox can't find the server at us.data.toolbar.yahoo.com" Preceded by "Sever Not Found" This happens on any web site I try to access. Reloading version 31 Firefox works fine, but then it will update itself again.
    Windows 8.1 is my operating system.

    The latest Release is Firefox '''31.0''' as the only way you would get updated to the current Beta build which is Firefox 32.0'''b2''' (b2 = Beta 2 as there can be say six to twelve Betas) build is if you were on the Beta channel due to having installed a Beta build and continued using it since. If the Firefox 31.0 you installed is updating to 32.0b2 then the 31.0 you installed was a Beta build (make sure the file name did not have say 31.0'''b'''# as there were nine Betas) and not the Firefox '''31.0''' Release say from mozilla.org or https://www.mozilla.org/en-US/firefox/all/
    The typical reason for a new version (on Windows) not being able to connect after a new major version Firefox update or install is usually due to a software Firewall blocking the new .exe yet it may stll have the previous version allowed.
    *https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can
    *https://support.mozilla.org/en-US/kb/configure-firewalls-so-firefox-can-access-internet

  • Can't access Web Site, super slowly and time out!

    Hi all,
    I am using Server 2012 R2 with Hyper-V, HP DL360 G6 Server
    The Master OS have a NIC1 to VLAN1 Switch (Also in the Cisco SG300 Switch)
    Plus other NIC2 connect to Cisco SG300 28 Switch (Running in L3 Mode), this Cisco then connect  to a SonicWALL NSA 2400.
    I build some VLAN31 on SonicWALL NSA 2400, and add this to the Cisco SG300 as Truck Port connect Both...
    Other Port on the SG300 are untouch, so mean default running mode is Truck mode, and one of it port connect to the NIC2 to the Server ...
    Ok, if Hyper-V VM, not enable VLAN in the Hyper-V Management in 2012 R2, it can take the DHCP from the SonicWALL NSA 2400 no problems, can see other LAN (VLAN1) machine well both direction, and go to Internet too.
    But, if I setting the VLAN31 on Hyper Manager to some VM, it can take the DHCP and take the IP from SonicWALL for this VALN31, include DNS, GW etc...
    But ... it just can ping internet, for example, ping www.yahoo.com it ok, but open IE, enter www.yahoo.com will super super slowly and time out, if running CentOS 6.5 Linux, enter yum update, it total not work, time out, 0.2kb/s etc. But it can ping to www.yahoo.com
    no problems...
    And If Windows run routert www.yahoo.com, over 10s to see next hub ...
    I am double checked SonicWALL NSA2400 Firewall Policy is allow all VLAN and LAN to WAN, and VLAN TO VLAN too..
    What is wrong on the Hyper-V VLAN? Do I am setting wrong of my switch port mode (Access/Trunking)?
    I am now out of direction what is go on to troubleshooting this.
    Thank you.

    Microsoft Windows [Version 6.3.9600]
    (c) 2013 Microsoft Corporation. All rights reserved.
    C:\Users\Administrator>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : JimmyChan-G6-01
       Primary Dns Suffix  . . . . . . . :
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
    Ethernet adapter Ethernet 5:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Intel(R) PRO/1000 PT Dual Port Network Co
    nnection #2
       Physical Address. . . . . . . . . : 00-1B-78-5A-B2-81
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Ethernet adapter Ethernet 4:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : HP NC382T PCIe DP Multifunction Gigabit S
    erver Adapter #52
       Physical Address. . . . . . . . . : 00-26-55-23-1F-E2
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Ethernet adapter Ethernet 3:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : HP NC382i DP Multifunction Gigabit Server
     Adapter #49
       Physical Address. . . . . . . . . : 00-26-55-1A-26-F8
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::1de6:509d:b011:775a%14(Preferred)
       IPv4 Address. . . . . . . . . . . : 192.168.218.157(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 192.168.218.1
       DHCPv6 IAID . . . . . . . . . . . : 436217429
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-D3-8A-8D-00-26-55-23-1F-E0
       DNS Servers . . . . . . . . . . . : 8.8.8.8
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Ethernet adapter Ethernet 2:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Intel(R) PRO/1000 PT Dual Port Network Co
    nnection
       Physical Address. . . . . . . . . : 00-1B-78-5A-B2-80
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::acb8:319f:2c75:f829%13(Preferred)
       IPv4 Address. . . . . . . . . . . : 192.168.101.11(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . :
       DHCPv6 IAID . . . . . . . . . . . : 218110840
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-D3-8A-8D-00-26-55-23-1F-E0
       DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                           fec0:0:0:ffff::2%1
                                           fec0:0:0:ffff::3%1
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Ethernet adapter Ethernet:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : HP NC382T PCIe DP Multifunction Gigabit S
    erver Adapter #51
       Physical Address. . . . . . . . . : 00-26-55-23-1F-E0
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{A9915F4B-84C6-4168-8E25-909FD2105BD9}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter isatap.{E893BCF0-EA57-4E6D-8406-1B6ECF27A1C1}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    C:\Users\Administrator>
    Above  is the Server 2012 R2 Master Host (Mother)
    But ... actually still have one Ethernet 6 NIC Card there, it also NC382i, buildin HP DL360 G6 NIC... This card is connect to the Cisco SG300 28 Switch and the Server, and make this card as for Hyper-V Switch (Extenal) ...
    I don't why run ipconfig /all not see this card above ..
    If you need Screen Capture, let me know ...
    THX

  • Intermittent can not access web sites.

    I have a HughsNet satelight dish/ HughsNet modem. I have a
    WRT 160N v3 rounter that routes two computers (mine and my wife's) that are
    connected to the router with Cat 5 cables. Each computer has a printer attached to
    the local computer only (no sharing). We have had several power outages.
    We have been having increasing problems with connecting to websites and
    connecting to AOL. We have these problems with both AOL and Google Chrome.
    The error messages are: "The web address could not be found", and onece I got:
    "More than one device is performing address translation (NAT)". Also, some
    downloads fail.
    What I have already tried: I opened a utility (trouble shooter?) where you type in the
    name of the website and it shows the numerical translation...it was working without
    error.
    These problems occur on both computers and it does not matter if only one is being used and
    the other is sleeping/shut off.
    I flushed the DNS cache on both PCs:
    (Open up a command prompt (Start > Run > cmd.exe > OK).
    Type in the command ipconfig /flushdns)
    I made sure that my router's firmware was the latetest available.
    I changed the router to distribute Goggle's DNS (8.8.8.8, 8.8.4.4.) instead of the default
    I.S.P's.
    I opened my Local Host file and checked to make sure that there was not any ip
    addresses listed that were not commented out (#).
    However, when I went to my wife's comptuer to do the same thing, C:\Windows
    \System32\dirivers\etc, there was NO host fire or any other file in the etc folder. Do
    not know why, I never deleted it and my wife would not know how to delete it.
    When I typed the the ip address for the router on my wifes compter (mine was o.k.),
    instead of a blank user name and "admin" as the password, both fields were
    blank...keeping me from access it. I tried entering admin as the password and
    leaving the username blank, but it told me I had not entered the correct password.
    I have disabled my Firewall, no change.
    I have run Malwarebytes, and have reset (little red button on the back), the router all
    to no avail.
    What to do? Any help, ideas please.
    Note: I am a rank amature. If you give me an abstract of a possible solution (like: set
    your router to bridge mode, I will not be able to do it. Please give any possible
    solutions in the "just like I am six years old", format: First type in XXXX then select
    XXX, then go to XXXXX etc. An abstract answer will only make sense to other
    experts (which I am not), and frustrate me.
    Thanks for any help.

    In this example, they show you how to change the local IP address to 192.168.2.1. But use 192.168.4.1 to be safe. Don't worry that it says DSL. It's the same principal.
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3687

  • Firefox icon disappeared, have to use Internet Explorer to access web sites. Although I can get into Yahoo home page, am unable to open e-mail account.

    Turned on computer this am and firefox icon not there. Used Internet Explorer to access web sites. Was able to access my Yahoo home page but not able to open my e-mail account. I am not savvy enough to change settings by myself, so I really need help.
    Thank you

    Hi--I tried your suggestion and no dice. A window came up with the following:The item 'Firefox.exe' that has this shortcut will no longer work properly. Do you want to delete?
    Another window said 'C:Program files (x86) Mozilla Firefox\firefox.exe' specified in the target box is not valid. Make sure the path and file name are correct.
    I have no clue as to what that means. I did delete the shortcut.
    Finally went into our Kaspersky virus protection and found Firefox is in quarantine and that is probably why I am unable to uninstall and reinstall.
    Any ideas????
    Thanks, Ginny

  • Can't Access One Site - Common Threads

    I have recently been hit by the unable to access one site problem.
    Having read through all the threads, it seems many people are identifying it as a possible DNS issue; however, it seems that almost all of the issues are with people who are hosting their own web servers off-site.
    I was hoping this thread could gather information from people who are having/had this issue?
    1) Was the inaccessible site self-hosted?
    2) Did you have any server changes, etc?
    3) Have you solved the issues, how?
    Hopefully this gets to the bottom of things.

    There is one site that I am aware of that I can not access using my Airport. I have narrowed down the issue to the Airport so far. When I bypass the Airport, the web site connects. Both my Macbook and two PC's can not access this site if I connect via the Airport. I have reset, powered down, booted the modem, worked with Norton and Comcast: still no fix.
    I tried changing settings in the utility tool that were suggested on the boards here and still no correction. If anyone has an idea, please post here. Thanks. If I find a correction, I will post here.

  • Just recently I am getting the following error message when trying to access web sites. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. It is an issue with some plug-in?

    Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?

    I have advised McAfee's product team of the problem and this thread, and they're looking into it now.

  • Can't access some sites when using Aiport Express, why?

    I'm using Windows 7 and my router is a wireless Apple Airport Express that is approximately two years old. Suddenly I can't access some sites (for example www.sthlm.friskissvettis.se, or www.vegetarian-shoes.co.uk, some streamed tv-shows on svtplay.se, and a number of other random sites) when connecting to internet with my router. It worked good until recently and I'm fairly sure this problem emerged when my ISP upgraded from 10/10mbit to 100/10mbit speed. Most other sites like facebook and google works fine.
    When using my network cable to connect to internet everything works fine and I can access these sites.
    Firmware is current and I've tried reseting the router to factory defaults.
    Tried different browsers, and I can't ping the "blocked" sites either. Tracert www.sthlm.friskissvettis.se starts with 10.0.0.1 and continues through a number of long addresses until it says timeout. The last working address before timeout was sth-tcy-ipcore01-ge-0-2-0.neq.dgcsystems.net [83.241.252.13], if it matters. Tracert www.vegetarian-shoes.co.uk also eventually gives me a timeout.
    When the network cable is plugged in, I still get timeout on tracert www.sthlm.friskissvettis.se even though I can access the site in Chrome. Weird. www.vegetarian-shoes.co.uk doesn't give me a tracert timeout when the cable is plugged in, and I can access the site as usual.
    I've tried changing DNS servers to use opendns servers instead, but to no use.
    I've tried pinging these two sites with a lower MTU packet size (with this method: http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista- or-windows-7/), but still can't access them through ping...
    I don't know what to do anymore.... any suggestions???
    Thanks

    Hi Punice
    first try to disable JavaScript from : Firefox button (or Tools menu) > Options > Content panel > '''UNcheck''' Enable JavaScript.
    if the above does not help check with a few malware/virus scan programs for virus. You need to use all programs because each detects different malware. Make sure to update each program to get the latest version before doing a scan.
    http://housecall.trendmicro.com/ - Trendmicro online
    http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    http://www.superantispyware.com/ - SuperAntispyware
    http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    http://www.microsoft.com/windows/antivirus-partners/windows-xp.aspx
    check also for a rootkit infection with TDSSKiller.
    http://support.kaspersky.com/viruses/solutions?qid=208280684
    thank you

  • Strange WLAN issue - can't access secure sites

    Hi!
    I've just bought a Toshiba L100-120. Everything is fine except the following.
    I can't access secure sites with the built-in Intel 3945abg device. Other sites are OK.
    If i connect LAN, everything is fine. If I insert my PCMCIA-wireless card, also everything works. The only problem is: to access secure sites with the Intel wireless device.
    I already changed the drivers, I tried everything. It's very strange :(
    Many thanks if anybody has an idea!!!!

    Hi
    Im a little bit confused. Do you mean the secured WLan or secured internet websites????
    If you cannot enter the secured, encrypted WLan you need to enter the right key.
    In other case if some websites are not displayed you could try to change the IE privacy settings for the Internet zone.

  • Can I access Webi queries and Xcelsius dashboards from SAP portal?

    Hello,
    Can I access Webi queries and Xcelsius dashboards from SAP portal?  And how?
    Thanks

    Portal Part 1
    /people/ingo.hilgefort/blog/2010/03/29/sap-businessobjects-enterprise-sap-enterprise-portal--part-1-of-4
    Portal Part 2
    /people/ingo.hilgefort/blog/2010/03/30/sap-businessobjects-enterprise-sap-enterprise-portal-part-2-of-4
    Portal Part 3
    /people/ingo.hilgefort/blog/2010/04/08/sap-businessobjects-enterprise-sap-enterprise-portal--part-3-of-4
    Portal Part 4
    /people/ingo.hilgefort/blog/2010/04/21/sap-businessobjects-enterprise-and-sap-enterprise-portal--part-4-of-4
    Ingo

  • I can't access a site on Mozilla (or in Chrome, IE) but I could before. What can I do?

    I can access the site in question on other computers but not my work computer but I could before.

    Is this a secure site (https) or a normal http link?
    Can you access the site via Google translate with a random source language via an http link?
    *http://translate.google.com/translate?hl=en&sl=fr&tl=en&u=
    Do a malware check with several malware scanning programs on the Windows computer.
    Please scan with all programs because each program detects different malware.
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • DOD access card certificates not recognized when trying to access web sites with a card reader while older version of firefox did.

    In the past I have been able to access web sites that require certificates pulled from a common access card inserted into a card reader attached to my Mac. Since I have updated to the newer version of Firefox, the sites that I am trying to gain entry to are not recognizing either the card, card reader or those certificates. If I use Safari or my work computer, the sites recognize my card and certificates and I am grated entry. I would use Safari but I like the format of Firefox for the specific tasks that require the access card. Just looking for a solution. Firefox does open other sites just fine. It's just the ones that require the card, reader and certificates.

    Anything here:
    * [[/questions/808161]] Trying to use a CAC smart card reader with Mac version of Firefox
    * [[/questions/752709]] Having problems configuring FireFox to use a CAC reader

  • I'm trying to update a Muse site and it keeps telling me that the site was created with a different version of Muse. I have updated Muse and still can't access the site to make changes.

    I'm trying to update a Muse site and it keeps telling me that the site was created with a different version of Muse. I have updated Muse and still can't access the site to make changes.

    Hi rgarden95,
    Can you please confirm the exact version of Muse you are opening the file with?
    To check the version of Muse, please click on help->About Adobe Muse CC.
    Regards,
    Akshay

Maybe you are looking for

  • Hiding a field in PA30 screen(for inoftype 0001)

    Hi All, I have an requirement that i have to hide a Cost center field in PA30 - for infotype 0001 . I have maintained v_t588m in SM31 for screen 2000 i have selected the costcenter radiobutton to hide and saved but the changes are not effecting to th

  • Target JSP report fails when called with a key defined in cgicmd.dat

    Hi, When I am calling the parameter form report as (on my local pc): http://rnbhatta-us:8888/reports/pf_sumsptype.jsp?gsi It works fine. Here 'gsi' is the KEY that has the userid/passwd@connect_string that I have defined in the cmgcgi.dat file on my

  • Ipod touch rented movies to my TV

    I used to watch movies from my 80 GB ipod connected to my TV, before it was stolen on a vacation in Tahiti. When I returned to the states, I thought I would try the NEW iPod touch. But, when I plug the ipod touch into my TV (like I use to do) I only

  • IPhoto library management question...again

    First of all, I am new to the forums and new to Macs in general, hence some of my concerns/questions are probably a result of my exclusive use of Windows. I have a relatively large number of photos (15,000) and have spent a lot of time over the years

  • The report execution '' has expired or cannot be found. (rsExecutionNotFound) - Windows Service

    Hello, I have created a service that prints and saves reports to pdf.  I am using report viewer control in remote processing mode.  All is fine until the server with reporting services installed is rebooted and the session is lost.  I can fix it by r