Can't create second GWIA in Groupwise 2014

Upgraded from Groupwise 2012.0.3 to Groupwise 2014.0.1 Everything went fine with the upgrade process. The existing GWIA on our primary domain upgraded fine and is working with not problems. The problem comes in when trying to create a second GWIA in any domain, primary or secondary.
I connect to the domain, go to Internet Agents, click new, fill out the info and after a few seconds I get "Internet Agent "GWIA" creation failed." Looking in the domain wpgate directory I can see that the gwia folder was created and the wpcin and wpcout folders where created and a couple of files under that but nothing else. The rest of the folder structure is not there, ie defer,dsnhold, gwhold...etc.
I am pretty certain I am doing it correctly as I am able to create multiple GWIAs on my test server using the same process. It seems cut and dry. The only difference is that my live environment was upgraded from 2012 and my test server was a clean install of 2014.
Anyone have any ideas what may be happening?
Thanks
Dave

Hi,
Sorry, I don't have one of those lying around to test on
If nobody else pops by with some bright suggestion shortly I would suggest that you open a Service Request with Novell Technical Support - depending on the urgency of your situation of course.
Let us know how it goes.
Cheers,

Similar Messages

  • Can't create new users after GroupWise is moved from NetWare to Linux

    Hi,
    I moved GroupWise (Version 6.5 SP 6, single domain and single office)
    from NetWare 6.5 server to SUSE Linux Enterprise server 9. It seems the
    GroupWise server is running oaky. Existing users are able to connect
    their mail box and send and receive messages. But I can't create new
    users on the GroupWise server.
    I used ConsoleOne installed on the Linux server to create new GroupWise
    users. It seemed that I was able to do it. The new users appear on the
    NDS and the GroupWise File IDs were assigned for these users. And I was
    able to add these new users to distribution lists. But the users DB
    files (userXXX.db) were not created under /grpwise/po/ofuser on the Linux
    server and they cannot connect to the server. Old users cannot find them
    in Novell GroupWise Address book.
    Does anyone how to fix the problem?
    Thanks in advance!
    Jinkang

    Hi,
    [email protected] wrote:
    >
    > Hi,
    >
    > I moved GroupWise (Version 6.5 SP 6, single domain and single office)
    > from NetWare 6.5 server to SUSE Linux Enterprise server 9. It seems the
    > GroupWise server is running oaky. Existing users are able to connect
    > their mail box and send and receive messages. But I can't create new
    > users on the GroupWise server.
    >
    > I used ConsoleOne installed on the Linux server to create new GroupWise
    > users. It seemed that I was able to do it. The new users appear on the
    > NDS and the GroupWise File IDs were assigned for these users. And I was
    > able to add these new users to distribution lists. But the users DB
    > files (userXXX.db) were not created under /grpwise/po/ofuser on the Linux
    > server and they cannot connect to the server. Old users cannot find them
    > in Novell GroupWise Address book.
    >
    > Does anyone how to fix the problem?
    This clearly sounds like your domain (which is the part of groupwise
    which you admin against) doesn't/can't talk to the postoffice, so the
    change you made (to the domain) does never get to the PO (which is where
    the addressbook of your other users come from, and is what is
    responsible for creating the user DB). This seems very likely to be
    caused by your move not being done properly, and old information (either
    path or IP address) for the PO still being in the domain and/or domain
    database.
    So how's the domain linked to the PO?
    CU,
    Massimo Rosen
    Novell Product Support Forum Sysop
    No emails please!
    http://www.cfc-it.de

  • Can't create second email account

    I'm just use bb..and I use torch 9800..I have two email account that I create before..but I can't set up my two email account..I just can set up one only of my email account..so,how can I set up my second email account??...>Help wanted<

    OK, let me see if I understand:
    You have one email account successfully integrated.
    You want now to integrate a Yahoo email account, but when you provide the credentials to the on-device email configuration wizard, it replies with "password and email is incorrect".
    Is that accurate? If so, I suspect that the error message is not exactly that...but nevertheless it sounds like the credentials you are providing for this Yahoo account are not valid. Any chance there are special characters and/or numbers in the email address or the password? If so, then this may apply...for instance, if your password is
    ab123
    and you enter
    a > b > ALT > 1 > 2 > 3
    the actual result will be
    ab1er
    You must enter
    a > b > ALT > 1 > ALT > 2 > ALT > 3
    in order to wind up with ab123. So, in this example, while on the BB keyboard you think you are typing ab123, you are actually typing ab1er.
    On your BB, when you type your password, you should get just a moment where each character is shown in the clear before it changes to an *. Watch closely the next time and you may see a surprising result.
    Otherwise, do indeed try (via your BB Browser) the link provided above by Wolf359. Additionally, you can, from your PC/browser, try your carriers BIS website...you will need to ask them for that URL. Further, if you ring up your carrier, they may be able to integrate this to your BB for you.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How can I create second page in Pages document?

    In my Pages document, I've gotten to the bottom of the page and can't get a second page.

    If you are using the wprd processing document it will add a page when go continue to write.
    If you use a page layout document and have added a textbox to write your text you have to go Insert > Page > choose text or blank.

  • Can't create second caldav account

    I have a work calendar that I have successfully synced with google and embedded on my website. Now I would like to sync a second calendar for family stuff. But every time I try to create a second caldav account in iCal, nothing happens! I need a second account because all my work stuff is handled using a separate domain. I go to the Accounts tab in iCal's prefs, click on the plus sign, the fill-in page comes down, I fill in all the correct info, get a spinning belly button for a few seconds, then it scrolls back up, but no new account gets added!
    Has anyone successfully entered two caldav accounts into iCal? I know my information is correct, because I was able to create the family caldav account on her computer.
    I hope someone has the answer. I'm stumped!
    TIA,
    Thad

    I solved my problem.
    I quit iCal and relaunched it. I got my second caldav account... and like nine more, since I tried entering the info several times. Weird. Apple, if you're listening, please fix this small bug.
    Aloha.

  • How can I create a second sheet within a tab?

    How can I create a second sheet within a tab? I have tried to add another table but it shows up on top of the existing table. I want to have two sheets or tables within one tab so I can further sort and categorize within a section. Is this possible? Thanks for all the help!
    -Bridget Altman
    Administrative Associate
    Discover Abroad at the University of Georgia

    You can insert a new table on the View Responses Tab with
    Insert > Table
    You can also insert a new sheet with a new table with
    Insert > Sheet
    You can drag and drop the table if it does overlap with another table. Just select the table you want to move and drag the top-left corner of the table to move it.
    Hope this helps
    Gen

  • RMBP Mid 2014 Windows 7 installer can't create partitions

    Hi all,
    I have a late 2014 Retina Macbook Pro with 1TB SSD and Intel Iris Graphics (no nVidia). It has been updated to Yosemite 10.10.2.
    So for I had good luck installing Windows 8.1 Professional on it via the bootcamp assistant from a USB key. Unfortunately, due to work requirements, I need Windows 7 (compatible VPN clients and proprietary software at a customer). Windows 7 Professional SP1 however won't cooperate. For the record, I off course removed Windows 8.1 first again via BCA.
    First problem was that the 16GB Lexar Jumpdrive I used to install Win 8.1 didn't want to boot when it was created by BCA for Windows 7. Even when holding the Option key at boot, it didn't even show in the boot options. Very weird. This was quickly solved by using an 8GB Kingston Datatraveller stick instead which boots fine.
    The BCA does all its stuff correctly then but when booting into Windows 7 and starting the install, the Windows installer first complains it must format the bootcamp partition as NTFS. If I then do that, the installer complains it can't create additional partitions.
    OK so let's format it to NTFS. Gone is the BOOTCAMP label.
    But Windows refuses to install anyway.
    I do not have any additional USB drives inserted, nor is there a Superdrive present. Apple support page said to remove any Thunderbolt devices but there are none.
    I have looked for similar threads but the reports there are about the fusion drives in the new 5K iMac and Windows 8.1.
    So far I have also tried to format the bootcamp partition as ExFat as suggested in other threads but this makes the Windows 7 installer complain it needs additional drivers for CD/DVD and refuses to install.
    This is what I see when I hold the Option key during startup when BCA has created the partition and the USB install drive is inserted:
    So I'm kind of out of options. Any help or hint would be appreciated!

    So this is quite embarrassing. I had already deleted the Windows 7 partition via BCA so to answer your question Loner T, I started BCA again. Unticked create USB installer and download support software and only let it create the Windows 7 partition again. The only difference with last time: I choose 149GB instead of 102GB (thanks to the bloody difficult slider in the BCA).
    After bootup of the USB key the install went fine and now I'm looking at a running Windows 7 on my rMBP
    Problem is: I have no idea how I solved it. What I did before I posted my question:
    - Partition size was 102GB vs 149GB now
    - The previous BOOTCAMP partition was erased and reformatted by DiskUtility in ExFat
    - It was then removed by BCA
    Could this have reset the out of sync MBR vs GPT?
    Anyway, it works. Here's the output of the commands:
    sudo gpt -vv -r show /dev/disk0
    gpt show: /dev/disk0: mediasize=1000555581440; sectorsize=512; blocks=1954210120
    gpt show: /dev/disk0: Suspicious MBR at sector 0
    gpt show: /dev/disk0: Pri GPT at sector 1
    gpt show: /dev/disk0: Sec GPT at sector 1954210119
           start        size  index  contents
               0           1         MBR
               1           1         Pri GPT header
               2          32         Pri GPT table
              34           6        
              40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
          409640  1661515288      2  GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
      1661924928     1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      1663194464         672        
      1663195136   291014656      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      1954209792         295        
      1954210087          32         Sec GPT table
      1954210119           1         Sec GPT header
    sudo fdisk /dev/disk0
    Disk: /dev/disk0 geometry: 121643/255/63 [1954210120 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 -     409639] <Unknown ID>
    2: AC 1023 254  63 - 1023 254  63 [    409640 - 1661515288] <Unknown ID>
    3: AB 1023 254  63 - 1023 254  63 [1661924928 -    1269536] Darwin Boot
    *4: 07 1023 254  63 - 1023 254  63 [1663195136 -  291014656] HPFS/QNX/AUX
    So I don't really know what I did to solve this... Maybe one of the utils synced the MBR and GPT again?

  • Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?

    Hello. I have an iPad2, and iMovie software. My main problem, for the moment, is the length of the videos: I can´t create a video with more than 56 seconds. When I try, the app shuts off... Can anyone help me?

    Sorry. We can't help you. It's no longer an iPhone. Apple won't touch it.
    Take it to whoever replaced the screen and see if they can help you.
    iPhones are not user servicable and Apple does not sell iPhone parts at all. I'd be surprised if you were actually able to back it up at this point. It sounds like it's completely borked.

  • Can't create apple id...account limit reached...i have just bought this iphone second hand.. how can i fix this problem please

    can't create apple id...account limit reached...i have just bought this iphone second. how can i fix this problem please.

    appleid.apple.com
    ^ There's your website, go there, create apple id, smile
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    There's the link part of it , Bigger smile

  • Can I create a second service console in ESX 2.5.5?

    Can I create a second service console in ESX 2.5.5?
    Yes, I've done it in ESX 3.+, but I can't find/verify it's ok in ESX 2.5.
    Any procedures, commands or comments welcomed.
    ALL POINTS WILL BE AWARDED.

    No you cannot - The service console in ESX 2.x actuallys loads before the vmkernel and has control over its own physical NIC and memory - In esx 3.x (vSphere) the VMkernel loads first and provides those resources to the service console allowing you to create multiple service console ports -
    If you find this or any other answer useful please consider awarding points by marking the answer correct or helpful

  • Message: "Administration rights are required to complete Adobe Add-ons installation or removal" - this pops up every few seconds after installing CC 2014. When I double-click on it the CC console opens but is entirely blank. What can I do?

    Message: "Administration rights are required to complete Adobe Add-ons installation or removal" - this pops up every few seconds after installing CC 2014. When I double-click on it the CC console opens but is entirely blank. What can I do?

    Some saved Mac links that may help
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0

  • Groupwise 2014: How do I change the FID of a user

    Hello!
    In ConsoleOne you can easily change a users FID, but is it possible to do that in the new Administration Console in Groupwise 2014?
    regards
    Daniel

    Here's a script to create a user with a specific FID.
    #/bin/bash
    # -- Script to create GW user with a given FID --
    # -- Edit IP PORT and GWADMIN values to match your system
    IP=10.10.10.10
    PORT=9710
    GWADMIN=admin
    read -p "Enter GroupWise Admin Password: " ADMINPWD
    read -p "Enter First Name for $GWID: " FIRST
    read -p "Enter Last Name for $GWID: " LAST
    read -p "Enter GroupWise UserID for new user: " GWID
    read -p "Enter FID for $GWID: " FID
    read -p "Enter Domain for $GWID: " DOM
    read -p "Enter Post Office for $GWID: " PO
    read -p "Enter new password for $GWID: " USERPWD
    BASEURL="https://$IP:$PORT/gwadmin-service/domains/$DOM/postoffices/$PO/users"
    USERDATA='{"name":"'$GWID'","givenName":"'$FIRST'" ,"surname":"'$LAST'","fileId":"'$FID'"}'
    PWDDATA='{"userPassword":{"value":"'$USERPWD'"}}'
    PWDURL="$BASEURL/$GWID/clientoptions"
    curl -k --user $GWADMIN:$ADMINPWD -H "content-type:application/json" -X POST --data $USERDATA $BASEURL
    -Morris
    >>> laurabuckley<[email protected]> 3/17/2015 6:16 AM >>>
    Hi,
    The FID editor that was available to change the FID on an archive does
    not work against a GroupWise 2014 system.
    You can create a user with a specific FID - just look up a little in
    this thread for DZanre's post about the command to use.
    Perhaps if you tell us a little more about your situation we could give
    more specific advice.
    Cheers,
    Laura Buckley
    Technical Consultant
    IT Dynamics, South Africa
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below...
    laurabuckley's Profile: https://forums.novell.com/member.php?userid=122
    View this thread: https://forums.novell.com/showthread.php?t=476849

  • Need guidance for eDirectory for GroupWise 2014 Installation

    Hello,
    I am installing GroupWise 2014 on Windows Server 2012. I first need to install eDirectory. This will at first be a test server for now. I don't know what to do for the eDirectory install. The documentation tells us what to do but it does not give a visual example or sample of what to put in. So, it does not make sense to me.
    I am including two attachments. One attachment shows my eDirectory installation screen where I am to declare a tree and context, and to create my Admin account. Why do I keep getting a Context Format Error, and what should it look like? Please provide an example for each field shown on the screenshot example. Also, if you need a domain name, let's call it mycompany.com for now. The Windows 2012 server is in Workgroup Mode and it will not be joined to Active Directory.
    Thank you.

    Hi there,
    Originally Posted by jhieb
    I am installing GroupWise 2014 on Windows Server 2012. I first need to install eDirectory.
    You are aware that with GroupWise 2014 no directory (be it eDirectory or Active directory) is not needed anymore?
    Originally Posted by jhieb
    This will at first be a test server for now. I don't know what to do for the eDirectory install. The documentation tells us what to do but it does not give a visual example or sample of what to put in. So, it does not make sense to me.
    De GroupWise documentation does indeed not go into the eDirectory details. eDir is seen as a different product for which you can find the needed documentation in it's own section.
    I'm curious though, are you wanting to install eDirectory because you will need that at a later point in time, or because you think that is required to run GroupWise 2014?
    Cheers,
    Willem

  • Can't Create Pools or Volumes

    After a number of attempts over an extended period, I have finally succeeded in setting up a new Novell Suse Linux server with OES (SLES 11 SP3 with OES11 SP2). I did it mainly to prove that I could, having used Netware and then NOWS SBE for a time, and I still have a Maintenance / Support agreement for NOWS. As much as anything its so I can learn more about the NOWS product.
    Now however, I've struck a bit of an impasse. I can log into iManager as well as Remote Manager. OES shows me that I have a SYS volume and a PUBLIC volume, and I thought I should create another volume in which I would create folders for Users, Shared Data, GroupWise etc. However, first one needs a Pool to create a volume in, and that's where I seem to be snookered. When I try to create a new Pool (in iManager), after nominating the server and a valid Pool name I'm told: "Error: Unable to find sufficient space for the request". When I set it up I did not impose any space restrictions and it appears to me that there's 219gb of free space reported. I can happily create new folders in the existing SYS or Public volumes.
    Is this not what I should be capable of doing, or what am I doing wrong?
    Thanks for any guidance.
    Jerome

    Originally Posted by zexec4
    ...able to install GroupWise 2014 on the SUSE side of things, but I can't connect to it from a client: but that's a question for a different forum> Thanks for those who have helped me thus far.
    A quick hint would be to check if the firewall is still enabled (with "SuSEfirewall status" or YaST). If that is the case and depending on what you want, either stop and disable the firewall from starting or configure the firewall to let through the GW client ports that have been set on the POA.
    If that's not it, indeed best to carry on with a new thread in the GW forums. :)
    Cheers,
    Willem

  • Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?

    Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?

    It is a hard one.. laptops with small drives are a pain.
    What you need is a home media server.
    Some people use a PC running itunes for cost.. but that is nothing like as good as using a Mac mini.. they make great little HTPC device.. you can plug in large hard disks and store all your files and media. And share it with the network.. Read up apple's instructions on home sharing.
    https://www.apple.com/au/support/homesharing/
    For cost you can buy a mini from 2011 or 2012.. I would not recommend earlier ones.. the advantage of 2012 is they have USB3 ports. But you will pay more for them.. new mini is not as useful.. they have soldered in memory and you cannot upgrade.. the old mini was the most easily modified mac in the whole range. Uses little power and can be bought for a $300US for a good one second hand.. maybe less.

Maybe you are looking for