Can't export to quicktime, error -8961

I've been trying to export a presentation in keynote to quicktime but it says I don't have enough disk space or there was a problem withe the file, error - 8961. I've try deleting every slide, I even tried exporting an empty presentation but I keep getting the same error (I have like 30 GB of free disk space so I fugured that wasn't the problem). Could someone please tell me what's wrong? I think I've made the problem worse because, trying to fix this, I deleted Quicktime to try an re-install it, thinking maybe that was the problem, and when I tried to install it again it says I already have quicktime in my computer, but I deleted every single file with "quikctime" on it

Thanks for the response.
On my G4 I am using 10.04.11 and it works just fine with my FCP 5. The G 5 that I am having trouble with FCP 5 is Snow Leopard. I figured that the Snow Leopard OS was probably the problem along with Quicktime 10. And you have confirmed that.
Looks like I will have to purchase a newer version of FCP for the G 5 and use my FCP 5 on my old G 4. Thank you apple.
Thanks for your input.

Similar Messages

Can AE Export a Quicktime Reference?

If so, how? If not, what is the best way to send footage back into Avid Media Composer?

Can AE Export a Quicktime Reference?
No. How should it? Ref movies are just what the name implies - basically playlists inside a MOV container referencing the original OMF/ MXF clips. No program other than Avid's own tools have a way of creating this, because it would require to be able to access the media database.
If not, what is the best way to send footage back into Avid Media Composer?
Set your QT CoDec to the Avid CoDec you are using anyway, then do a fast import. Otehrwise any otehr QT CoDec will do as well.
Mylenium

I can't export to QuickTime, it gives message "Codec not found."

I have long sequence, in which I have some Channel Swap effects. I get an error message saying it can't be rendered for a sequence this long (72 minutes) with my hardware (2009 iMac running OS 10.6.8). When I try to export to QuickTime, it tells me "Codec not found." I'm trying to export to Apple Pro Res HQ. What should I do? I took out the Channel Swap effects and didn't get the message anymore in the sequence, but I'm afraid the codec issue will crop up again, even though I changed it to Apple Pro Res in the Render Options tab under Sequence settings, rather than just "Same as Sequence". Eventually, I will have to export to HQ, and I'm not sure this codec lets me do that. Help!

You don't give any details about your format or sequence settings, so I'll be general here.
Just a couple of observations...
The only time limitation messages I've seen (in the last decade) have been resource-oriented, not NLE constraints so if your system doesn't like a 72-minute sequence I'd be looking at drive space or something like that. Have you tried outputting two 36-minute pieces?
I don't understand your logic in using the sequence codec option (which is limited to two specific formats) to control output of the sequence rather than the output "same as sequence" dropdown) options. Personally, I don't use either, I output the sequence as is and transcode in Compressor.
Simple as it sounds, "Codec not found" generally means exactly that, so I'd be looking at whether the codecs need to be re-installed.
Hope this helps

How can I export via QuickTime in iMovie '13 (10.0)?

Prior versions of iMovie had an export via QuickTime option, which allowed me to select the file format, encoding settings, etc. After upgrading to the new iMovie, that appears to have gone away. The Share -> File option does not allow me that level of control over the output file. Has that functionality been removed from iMovie?

I'm also having trouble with this. The new version of iMovie lost a lot of its features and is clearly focused toward the social media side of things. After importing using SD cameras that import video in a *square* PiP format, I am finding it impossible to update any of my settings to export the video in any other format that wouldn't cut out the picture. Basically, the only settings I've found in the share option of the iMovie 10.0 cu off the tops and bottoms of all my recording. Previously, I used QuickTime settings to pick what format and quality I wanted to export in. Does anyone have any insight about how to export using, say, a 640 x 480 format or in being able to adjust to any format other than the standard ones giving.
Is there any other video software I can be using to import and export with that gives me more functionality?

Can't export because of Error -50 but can't upgrade my final cut because of video card?

So I updated to mavericks later to find out you can't export in final cut pro unless you upgrade the software, my problem is that when I try to upgrade the software it says "you do not have the required graphics card"
So I'm stuck. What can I do? I Simply cannot export using any option as I either get a compressor error -50 or nothing happens at all.
I can't update the software. I can't export.
APP NAP IS OFF

If the problem is with the graphics card then here is a list of compatible cards: http://support.apple.com/kb/HT4664
What computer are you using? If it is an older Mac Pro 1,1 to 3,1 (early 2008) then the ATI Radeon HD 5770 should work. This is the one I've used and it has 1GB of memory. The more graphics card memory available the better. I read one account where a person had to go to 2GB of memory to avoid the spinning beachball but who knows what other resources he had tied up. For myself, I have a video-only machine and the Internet is disconnected when I'm editing and the 1GB worked perfectly fine. Oh, and with only 8 GB of RAM.
The 5770 cost $249 with free shipping about two years ago. Recommend not using a "flashed" card.
As for what to do for the interim, one suggestion would be to copy the Project to an external drive and find someone who would be willing to finish the share process. Other than that, it looks like you'll be dead in the water until the video card issue is resolved.

USING DISCOVERER DESKTOP CAN'T EXPORT AND GET ERROR ORA-00000

we use a win 2000 server to export discoverer reports by command-line methods.In the past ,everything is ok. But from last week , we found some reports always keep in export phase and can't export anything, also with ora-00000 error.
there are 2 things should be mentioned:
1. in the past , these reports can export without any error
2. we can export the same reports normally on another server(but we don't want to change server for some reason)
I know Oracle suggest we update to discoverer 10g, but it can't tell me why another client can export normally
so where is the cause?
Discoverer Desktop version - 4.1.46.08.00
EBS version - 11.5.9

Hi
Presumably you have tried rebooting?
If you have windows updates set to automatic it is possible that one of the recently applied updates has done this.
Best wishes
Michael

Exporting FCP quicktime error -50

hi i want to export a 9 minutes video with FCP. while exporting, suddenly an error was occurred "final cut pro has failed quicktime error -50" , the statement probably like this.
i've searched on internet about this bug (quicktime error -50) but i couldn't find solution
thank you very much.
any response will help .

One thing that seems to solve a lot of these export problems in 10,9 is this: right click on the FCPX app file and choose Get Info. Check the box next to Prevent App Nap. You may have to close and re-launch FCP for it to take efffect.
Russ

Will Not Export To Quicktime Error -1

Keynote has worked exporting to Quicktime perfectly in the past, but now says i don't have enough memory to export to Quicktime with an error or -1.
Just had plain text with me doing voiceover for about 20 minutes.
Have done it before with no problems.
I tried going to Library and removing the preferences for Keynote thinking maybe something got corrupted, but no dice.
Any help would be appreciated!

Was able to export after rebooting.

Export fails, quicktime error -50

fcpx will not export my project to the media browser or other devices. it starts to then comes up with a quicktime error -50. i did export a quicktime movie using media export but it loses sound a few minutes in and the video keeps playing.

code: Quicktime Error -50.
error: -50 is the paramErr or error in the user parameter list. I.e., a parameter that you are sending to the procedure is missing or the parameter is unacceptable for one reason or another. E.g., a missing path element, filename with an unacceptable character, a destination target that is non-existant, a target prodecure expecting data that is not included in the file, etc.

Can't export to Quicktime in proper aspect ratio.

I'm working on a project with a:
-Canon XL2
Set to:
-16:9 SD
-24p 2:3:3:2 Pulldown
Capture Preset:
-DV NTSC 48 kHz Advanced (2:3:3:2) Pulldown Removal Anamorphic
Sequence Preset:
-DV NTSC 48 kHz - 23.98
When I try to export to Quicktime it smashes the image from the left and right. The Quicktime window appears to be displaying a 16:9 aspect ratio, but for some reason it distorts the image and places black bars on both sides. Does anyone have any idea what kind of export settings I should be using for this? If you need more info to answer my Q. just ask...I will be monitoring this post closely.
thanks,
iMac G5 Mac OS X (10.4.6) 2.0 GHz, 400Gb Hard Drive, 2Gb Ram, 250Gb External

I've tried exporting in several different ways. My first attempt was just the obligatory Export: Quicktime: Current Settings. Then I played around with the various settings to no avail. Unfortunately, I'm really not sure what the difference is between exporting to Quicktime and using Quicktime conversion. I also don't know the difference between 23.98, 24@25, and 24. Maybe if I understood the settings it would be easier to figure out.

Can't export to quicktime v10 from FCP 5

I have recently loaded FCP 5 (Not Studio) onto a G5 iMac.
When I try and export to quicktime it only exports the first
18 seconds or so. My FCP 5 worked fine on my iMac G-4 with Quicktime 7.6 but it doesn't export on my G-5 using Quicktime 10.
It will export using quicktime conversion, but then I cannot get my chapter markers.
Any and all help appreciated.
Michael the Hunter

Thanks for the response.
On my G4 I am using 10.04.11 and it works just fine with my FCP 5. The G 5 that I am having trouble with FCP 5 is Snow Leopard. I figured that the Snow Leopard OS was probably the problem along with Quicktime 10. And you have confirmed that.
Looks like I will have to purchase a newer version of FCP for the G 5 and use my FCP 5 on my old G 4. Thank you apple.
Thanks for your input.

IMovie '09: Export to Quicktime: Error -108

I've been trying to export a movie - just over an hour long, primarily photos - to Quicktime. I was using the Apple Codec now I'm trying the MPEG-4 setting, with the HD 190X1080 16:9 size and 48,000KHz audio.
Every single time I try I get the "error code -108" message - not enough RAM. However I'm using a 24" iMac with 4GB.
I have NO ideas what-so-ever can some please point me in the right direction?
I'm running Snow Leopard - I've restarted the machine, repaired the permissions, the only thing I can imagine it's related to is that some of the material (music) is running off of an external hard-drive. Please? Some one help!

I would suggest trying it at 960x540. That will cut down the size by a factor of 4 and may let it fit in the RAM. This size upscales very nicely on most TVs because it is a simple transform to go to 1920x1080.
If that does not work, you may need to split your movie into shorter pieces.
What is your final destination? BluRay?

Can't Uninstall/Install Quicktime error number: 0x80040707

I am also having probelms with quicktime. I went to uninstall/reinstall it and have had no luck. When I run the uninstall shield, it starts and then before it goes farther than half way loaded it disappears.
I tried everything listed in the post below mine with no luck but I noticed that I have a different error code.
Also, I tried to install the standalone 7.0.4, it installs and then before it completes, when I click finish is comes up with this error:
Error Number: 0x80040707
DLL Function Call Crashed: QT Install code.Quicktimepostinstallproc
Setup will now terminate
I can't do anything with quicktime: run updates or use the plugins: nothing comes up or it restarts my firefox. What do I do? Really appreciate any help, I'm useless technologically. Thanks
Inspiron 700m Windows XP

hi ChummyGirl!
Error Number: 0x80040707
DLL Function Call Crashed: QT Install
code.Quicktimepostinstallproc
in this context, that often means the installation
configuration information of the QuickTime has been
compromised.
here's what we'll try first.
Download and install the Windows Installer CleanUp
utility. then use it to clear any existing
QuickTime installation configuration
information from your PC:
Descrip
tion of the Windows Installer CleanUp Utility
next use the QuickTime component of the
complete uninstall instructions in the following
document as a guide to a manual removal of leftover
QuickTime program files and folders.
Trouble installing iPod, iTunes, or QuickTime
software in Windows
once we've got all the existing QuickTime scraped
away, let's try a standalone QT 7.0.4 reinstall,
taking a few additional precautions.
download and save a copy of the QT 7.0.4 standalone
installer to your hard drive. (we'll run the install
from there rather than online.) switch off
antivirus and antispyware applications prior to the
install.
Quicktime 7.0.4 Standalone Installer
does that install go through okay?
love, b
hi ChummyGirl!
Error Number: 0x80040707
DLL Function Call Crashed: QT Install
code.Quicktimepostinstallproc
in this context, that often means the installation
configuration information of the QuickTime has been
compromised.
here's what we'll try first.
Download and install the Windows Installer CleanUp
utility. then use it to clear any existing
QuickTime installation configuration
information from your PC:
Descrip
tion of the Windows Installer CleanUp Utility
next use the QuickTime component of the
complete uninstall instructions in the following
document as a guide to a manual removal of leftover
QuickTime program files and folders.
Trouble installing iPod, iTunes, or QuickTime
software in Windows
once we've got all the existing QuickTime scraped
away, let's try a standalone QT 7.0.4 reinstall,
taking a few additional precautions.
download and save a copy of the QT 7.0.4 standalone
installer to your hard drive. (we'll run the install
from there rather than online.) switch off
antivirus and antispyware applications prior to the
install.
Quicktime 7.0.4 Standalone Installer
does that install go through okay?
love, b
hi nior
Error Number: 0x80040707
DLL Function Call Crashed: QT Install code.Quicktimepostinstallproc
this is the error msg i get.and i went thru ur previous posts and did everything it said.the problem is still there.and as u stated in one of ur posts,itunes was working perfectly until i installed a video codec.i donno what happened after that.i tried restoring my computer to a previous setting.still it doesnt solve the problem.
ur advice will help me solve this mess.
thanx
lucifer
ibm t43 Windows XP Pro

Export to quicktime error

hi all
did anybody get an error msg:
"Error compiling movie. Unable to create or open output file."
when exporting a movie in premiere pro cs3 to Quicktime??
why is it happening? in PPRO 2.0 it used to work all right!

I had this error message when exporting to a raid array on my network (A mapped drive) when I exported the same file/same settings to a USB drive it worked just find, as well as my internals, but that mapped drive...gave me grief.
Just a thought. Try exporting it to another drive.

Can't Open iTunes-Quicktime error

When I last tried updating my iTunes I had to cut the installation short and ever since I haven't been able to start iTunes. It tells me that Quicktime was not found and to reinstall iTunes. I've tried reinstalling iTunes many times but it doesn't work. My computer says I have Quicktime so I don't know what to do. Please Help!!

I experienced this same problem and struggled with it for two weeks. I had uninstalled and reinstalled many times. I had even installed Quicktime and Itunes as standalone products but still could not get past that error message or the "find Quicktime.msi" message. What finally fixed it was uninstalling (again) both Quicktime AND Itunes. I recommend backing up your music files just in case. Info on how can be found on the Apple website. Then go to http://support.microsoft.com/kb/290301 and read about and install Windows Installer Cleanup. After installing it, run it and select any Quicktime, Apple and Itunes products only. You should include the MobileMe and Safari programs, as well as anything that is related to Itunes. If you are unsure, verify them first before selecting them. Once you know, select the programs from the ones Windows Installer Cleanup lists one at a time or hold down the Ctrl button and select multiple programs. Just be sure you are not selecting a program not related to Apple, Quicktime or Itunes. Once that is done, restart your computer and download Quicktime as a stand alone product (not with Itunes). Then download Itunes as a stand-alone product (not with Quicktime). I did not select Itunes as the default player, but I don't think it will make a difference. It FINALLY solved my problem. Apparently I had bits of the programs still on my computer after removing them, and it was messing up the new installations. Good Luck!

Can't export to quicktime, error -8961

Similar Messages

Maybe you are looking for