Can't send mail to external recipients

When I invite a new member to a collaboration room, and this member is registered in active directory with an email adress, all invitation and notification mail work as they should.
However. I want to invite external users(external to our company) into the collaboration room without adding them to AD.
When I create a user in the portal user management, this user will NOT be a member of AD.
Then the notification does not work.
I get the following error :
"The mail could not be sent to the specified recipients"
Any ideas for why not ?
Forget security issues for the moment. They will be handeled later on, and may well require the user to exist in AD....
Im using EP 6.0.11.2, and KM 6.0.11.3, Exchange 2003.
Update :
I had a look at the trace file and found this :
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 550 5.7.1 Unable to relay for <user.name>@<external.company>
Looks like a mailserver problem. What is the right way to fix this ? Portal or Exchange ?
regards
Alexander Moan
Message was edited by: Alexander Moan

Hi Alexander,
in the portal please check that in the KM Configuration -> Utilities -> Channel Originators for all EMAIL Originators the Channel EMAIL is assigned (and not INTERNET). Also take a look the EMAIL Channel configuration (-> click in EMAIL).
You MUST configure the SMTP server mentioned here to be able to relay mails to the desired recipients.
Hope this helps,
Robert

Similar Messages

Outlook and mail services/ can't send mail to external emails

I have been setting up os x server as a mail server for my company. I bound open directory to active directory but could not manage mail for the active directory users that way, so I started creating new users through open directory.
I've hit a couple snags that I can't quite figure out. First, I can send and receive mail to other open directory accounts fine, but not externally. I've set up my MX records and a name records for my Internet domain.
I can receive emails from an external email address, I.e. Gmail, but cannot send to them. It gets stuck in the mail server's queue. Information logs says operation timed out for smtp.gmail.com and their ip address.
I forwarded the ports, 25, 993, etc from my dsl router to my firewall router, then from there to my mail servers static ip address. I'm at a loss. If it matters, I'm on a residential dsl currently, my ISP claims to block port 25, but in the log it looks like it goes through and sees gmails ip.
Secondly, this is all through the mail.app for my MBP. When I set up outlook 2003 on xp, I can send emails, but it doesn't download any. No errors in either the information log or outlook, outlook says it completed successfully. If it matters, I was getting an error from outlook previously, helo error for not a fqdn, but I deleted a line in the main.cf that required fqdns.
I appreciate any help.

***EDIT*** I have outlook working....now it is just the external email thing. Again...my ISP says they block port 25, but I went into /etc/postmail/master.cf and added to have SMTP go on port 2525 and still no go. Any help would be greatly appreciated!
***END EDIT***
I apologize...here is the SMTP information level log for sending to gmail
Jun 29 16:36:18 ANSENMSG postfix/smtp[17251]: 152CB659FA: to=<***@*******.***>, relay=127.0.0.1[127.0.0.1]:10024, delay=6.3, delays=0.03/0/0/6.3, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=15055-04, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 582EA65A09)
Jun 29 16:36:18 ANSENMSG postfix/qmgr[15069]: 152CB659FA: removed
Jun 29 16:36:48 ANSENMSG postfix/smtp[17299]: connect to mail.*******.com[**.***.**.**]:25: Operation timed out

Problem while sending mail to external mail ids

Hi All,
while trying to send mail to external mail ids through some custom program, i'm facing an error as "recipient not in address management".
Can anyone giude me why this is occuring and actually what is this Address management?
Thanks & Regards,
Anil.

Hi,
Check this sample code..
http://www.sapdevelopment.co.uk/reporting/email/email_mbody.htm
* Add the recipients email address
clear it_receivers.
refresh it_receivers.
 it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
what Fm you are using..?are you specifying like above for e-mail address..
Regards
vijay

Failed to send mail to external domain via portal

Hi Gurus,
By following the configuraion instructions in SAP library - Collaboration - Groupware - Installing and Configuring E-Mail Connectivity, I managed to send mail to recipients who reside in same domain e.g. [email protected] via portal.
However, I failed to send mail to external domain e.g. [email protected]. I got the following error message:
The mail could not be sent to the specified recipients com.sap.ip.collaboration.gw.impl.transport.javamail.exception.MailSendException: The mail could not be sent to the specified recipients
 at com.sap.ip.collaboration.gw.impl.transport.javamail.JavaMailTransport.sendMail(JavaMailTransport.java:183)
--------- exception is chained. Original exception ------------
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
 javax.mail.SendFailedException: 553 sorry, that domain isn't in my list of allowed rcpthosts (#5.7.1)
 at com.sun.mail.smtp.SMTPTransport.rcptTo(SMTPTransport.java:804)
 at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:320)
Please help.
Thanks alot.

Hi Ajey,
Thanks for your reply. I had tried your suggestion but same problem occurred with same error output.
Actually, I encounterred this error message before in my Microsoft Outlook, where System Admin returned me a mail saying that, my mail was undeliverable with the same error message. But this can be solved by applying the Internet Email Account Setting - Outgoing Server - My outgoing server (SMTP) require authentication.
So I am wondering,
1) This problem is caused by SMTP server?
2) Is there any workaround (like the Outlook Setting) I can configure in Portal?
Do you have any idea?
Thanks,
HauChee

How can i send mails from SAP?

how can i send mails from SAP?
what are the configurations i have to do in SAP for that?
pls give me a detail reply......
if possible, pls give me the sample ABAP program for that.

recently i have worked on a similar requirement here is the sample code for that
REPORT ZDOC_AS_EMAIL_3.
*& Report ZEMAIL_ATTACH *
*& Example of sending external email via SAPCONNECT *
TABLES: ekko.
PARAMETERS: p_email TYPE somlreci1-receiver.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: l_t_objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
*Retrieve sample data from table ekpo
PERFORM data_retrieval.
*Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
*Populate message body text
perform populate_email_message_body.
*Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                    tables it_message
                            it_attach
                        using p_email
    'Example . xls documnet attachment'
                                 'XLS'
                            'filename'
                    changing gd_error
                          gd_reciever.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
*Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekpo.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
*Build data table for .xls document
FORM build_xls_data_table.
*CONSTANTS: con_cret(2) TYPE c VALUE '0D', "OK for non Unicode
*con_tab(2) TYPE c VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
*Send email
FORM send_file_as_email_attachment tables pit_message
                                          pit_attach
                                       using p_email
                                            p_mtitle
                                            p_format
                                          p_filename
                                    p_attdescription
                                    p_sender_address
                                p_sender_addres_type
                                    changing p_error
                                          p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
*Fill the document data.
w_doc_data-doc_size = 1.
*Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'REPORT'.
w_doc_data-obj_descr = ld_mtitle . "mail description
w_doc_data-sensitivty = 'F'.
*Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
*Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
*Create 1st attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 0.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
**Create 1st attachment notification
*t_packing_list-transf_bin = 'X'.
*t_packing_list-head_start = 0.
*t_packing_list-head_num = 1.
*t_packing_list-body_start = 1.
*DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
*t_packing_list-doc_type = ld_format.
*t_packing_list-obj_descr = ld_attdescription.
*t_packing_list-obj_name = ld_attfilename.
*t_packing_list-doc_size = t_packing_list-body_num * 255.
*APPEND t_packing_list.
**Create 2nd attachment notification
data: x type i.
DESCRIBE TABLE t_attachment LINES X.
append lines of it_attach to t_attachment.
data: start type i,
      end type i,
      cal type i.
start = X + 1.
describe table t_attachment lines end.
cal = end - start.
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 0.
t_packing_list-head_num = 1.
t_packing_list-body_start = start.
t_packing_list-body_num = end.
*DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-obj_descr = 'Eng Change'. "ld_attdescription.
t_packing_list-doc_type = ld_format.
*t_packing_list-obj_name = 'Eng' .
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
*Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
object_header = l_t_objhead
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
*Populate zerror return code
ld_error = sy-subrc.
*Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
*Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 " WITH mode = 'INT'
"WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
*Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODY

Can't send mail since 10.4.6 update

Since updating my OS to 10.4.6 I can't send mail. I can receive mail and I can browse online. But mail will not go out. I've verified all the Outgoing Mail Server info SEVERAL times and have had no luck. I've enabled Entourage to handle mail instead of MacMail and it won't work either. Totally stumped.
Same thing has happened on my iBook G4 laptop by the way. I'm convinced that the update has something to do with this.

INTERNET CONNECTION LOST
so... since the 10.4.6 update once my computers fall asleep the connection to my wireless router is lost. (mail seems to be working ok, when i have an internet connection...)
I have tried multiple things to fix this. Thus far the only solution seems to be resetting the router to use connect back to the internet. Once this is done the internet connection works fine, until lost or the computers go to sleep. When i wake the computer i have to do it all over again... and on top of it the post link is missing on all the pages!!! so i am replying here.
So this time I have rebooted to my external drive with the previous version (10.4.5) to see if indeed it is the 10.4.6 update that seems to have hosed this connection somehow.
HELP please, this is terrible annoying. Is anyone else experiencing this?
thank you.
PowerBook G4 and PowerPC dual G5 (10.4.6 both) Mac OS X (10.4.6)

Sending Mails to Multiple Recipients using UTL_SMTP

create or replace procedure send_mail(msg_text varchar2) is
c utl_smtp.connection;
PROCEDURE send_header(name IN VARCHAR2, header IN VARCHAR2) AS
BEGIN
utl_smtp.write_data(c, name || ': ' || header || utl_tcp.CRLF);
END;
BEGIN
c := utl_smtp.open_connection('outlook.abc.com');
utl_smtp.helo(c, 'abc.com');
utl_smtp.mail(c, '[email protected]');
utl_smtp.rcpt(c, '[email protected]');
utl_smtp.open_data(c);
send_header('From', '"root" <[email protected]>');
send_header('To', '"abc" <[email protected]>');
send_header('Subject', 'WARNING: Salary has been changed');
utl_smtp.write_data(c, utl_tcp.CRLF || msg_text);
utl_smtp.close_data(c);
utl_smtp.quit(c);
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
BEGIN
utl_smtp.quit(c);
EXCEPTION
WHEN utl_smtp.transient_error OR utl_smtp.permanent_error THEN
NULL; -- When the SMTP server is down or unavailable, we don't have
-- a connection to the server. The quit call will raise an
-- exception that we can ignore.
END;
raise_application_error(-20000,
'Failed to send mail due to the following error: ' || sqlerrm);
END;
==============
when I execute the above using
sql> exec send_mail('hihihih');
I am getting the mails..no problems...
So..I created the following trigger and used the above procedure to send the mail...
CREATE OR REPLACE TRIGGER test_emp_table_trg
AFTER UPDATE
ON test_emp_table
FOR EACH ROW
WHEN (NEW.sal <> OLD.sal)
DECLARE
l_employee_name VARCHAR2 (240);
l_old_sal VARCHAR2 (240);
l_new_sal VARCHAR2 (240);
l_message VARCHAR2 (240);
BEGIN
/* Gets the employee full name */
BEGIN
SELECT ename
INTO l_employee_name
FROM test_emp_table
WHERE empno = :OLD.empno;
EXCEPTION
WHEN OTHERS
THEN
l_employee_name := NULL;
END;
/* Gets the old Salary */
BEGIN
SELECT sal
INTO l_old_sal
FROM test_emp_table
WHERE empno = :OLD.empno;
EXCEPTION
WHEN OTHERS
THEN
l_old_sal := 0;
END;
/* Gets the new salary */
BEGIN
SELECT sal
INTO l_new_sal
FROM test_emp_table
WHERE empno= :NEW.empno;
EXCEPTION
WHEN OTHERS
THEN
l_new_sal := 0;
END;
l_message:=
'Employee Name= '
|| l_employee_name
|| 'Old Salary= '
|| l_old_sal
|| 'New Salary= '
|| l_new_sal;
BEGIN
send_mail (l_message);
END;
END;
===================
I am not getting desired output..what might be problem friends...I am getting 0 values for old salary and new salary......
One more thing..when i use 2 receipts in the send_mail procedure like this...I added the following lines in the procedure to send to multiple receipents..
======
utl_smtp.rcpt(c, '[email protected]');
utl_smtp.rcpt(c, '[email protected]');
=============
Pleas have a look and correct me, where i went wrong....
Edited by: oraDBA2 on Sep 22, 2008 3:12 PM

Hi, You can use the following routine to send mail to multiple recipients through utl_smtp.
create or replace package mail_pkg
as
type array is table of varchar2(255);
procedure send( p_sender_e_mail in varchar2,
p_from in varchar2,
p_to in array default array(),
p_cc in array default array(),
p_bcc in array default array(),
p_subject in varchar2,
p_body in long );
end;
create or replace package body mail_pkg
begin
g_crlf char(2) default chr(13)||chr(10);
g_mail_conn utl_smtp.connection;
g_mailhost varchar2(255) := 'ur mail server';
function address_email( p_string in varchar2,
p_recipients in array ) return varchar2
is
l_recipients long;
begin
for i in 1 .. p_recipients.count
loop
utl_smtp.rcpt(g_mail_conn, p_recipients(i));
if ( l_recipients is null )
then
l_recipients := p_string || p_recipients(i) ;
else
l_recipients := l_recipients || ', ' || p_recipients(i);
end if;
end loop;
return l_recipients;
end;
procedure send( p_sender_e_mail in varchar2,
p_from in varchar2,
p_to in array default array(),
p_cc in array default array(),
p_bcc in array default array(),
p_subject in varchar2,
p_body in long );
end;
is
l_to_list long;
l_cc_list long;
l_bcc_list long;
l_date varchar2(255) default
to_char( SYSDATE, 'dd Mon yy hh24:mi:ss' );
procedure writeData( p_text in varchar2 )
as
begin
if ( p_text is not null )
then
utl_smtp.write_data( g_mail_conn, p_text || g_crlf );
end if;
end;
begin
g_mail_conn := utl_smtp.open_connection(g_mailhost, 25);
utl_smtp.helo(g_mail_conn, g_mailhost);
utl_smtp.mail(g_mail_conn, p_sender_e_mail);
l_to_list := address_email( 'To: ', p_to );
l_cc_list := address_email( 'Cc: ', p_cc );
l_bcc_list := address_email( 'Bcc: ', p_bcc );
utl_smtp.open_data(g_mail_conn );
writeData( 'Date: ' || l_date );
writeData( 'From: ' || nvl( p_from, p_sender_e_mail ) );
writeData( 'Subject: ' || nvl( p_subject, '(no subject)' ) );
writeData( l_to_list );
writeData( l_cc_list );
utl_smtp.write_data( g_mail_conn, '' || g_crlf );
utl_smtp.write_data(g_mail_conn, p_body );
utl_smtp.close_data(g_mail_conn );
utl_smtp.quit(g_mail_conn);
end;
end;
begin
mail_pkg.send
(p_sender_e_mail => 'urmail',
p_from => 'urmail',
p_to => mail_pkg.array( 'urmail','othersmail' ),
p_cc => mail_pkg.array( ' othermail ' ),
p_bcc => mail_pkg.array( '' ),
p_subject => 'This is a subject',
p_body => 'Hello Buddy, this is the mail you need' );
end;
/

Error while sending mail to external id

Hai all,
I am trying to send mail to external mail id using the FM SO_NEW_DOCUMENT_ATT_SEND_API1. After executing when i check in sost i m getting an error 'Cannot process message, no route from sapuserto external mail id.
Can anyone help me resolve this issue pls.
Thanks in advance,
Neela

Hi,
You have to fill the tables parameter 'PACKING_LIST'.
try with these values
wa_objpack-TRANSF_BIN = space.
wa_objpack-HEAD_START = 1.
wa_objpack-HEAD_NUM = 0.
wa_objpack-BODY_START = 1.
wa_objpack-DOC_TYPE = 'RAW'.
APPEND wa_objpack to it_objpack.
Regards,
Daz.

Can not send mail from PR Workflow to the approver

Dear all,
I have issues about send mail from PR Workflow to the approver.
Now when user create PR and the corresponding user can receive the workflow items in SBWP.
But no email from the user to approver.
If I assign authorization SAP_ALL to the user that create PR. The approver can recieve the workflow item PR in SBWP and email to their mail
Can you tell me about the authorization that can allow the user to send the workflow item PR in SBWP and email to the approver?
Now user can send mail to external and internal mail and I also configured the mail server in SCOT and can successfully send a mail to users in SO01 by manually creating a message.
Now the approver not receive any email but can receive a workflow item in SBWP
Regards,
Pannee

Dear all,
Thank you for all suppport, Now I can solve issues.
Regards,
Pannee

How to send mails to external maild like yahoo

I am using 'SO_NEW_DOCUMENT_ATT_SEND_API1'
funtion module to send mails to internal office mail ids and working correctly .
Not the requirement changed . I need to send mail to external mail id like
per at the rateyahoo dot com also.
What can I do to send mail to external mailids like yahoo.
Do I need to use flag some thing ?
THANSK IN ADVANCE.

Hi,
Hi,
It is posible to send the mail to external address usign the above FM . But some configurations have to be maitnaied in SCOT Tcode for INT (Internet) ->SMTP protocal. we need to give the Mail Host and Mail Port all this information is usually done by the BASIS. Please approach them for these settings and try again with the FM. Here we have to configure it to Yahoo so that we can send the mail.
Regards
Lekha

Sending mail to external mailid from user exit EXIT_SAPLEBNF_005

Hai ALL,
iam facing problem with sending mail to external id from user exit exit_saplebnf_005 , this user exit for ROLE Determination of releasing of PO .
in this user exit i passed a user name for this role from one z table.
through workflow the mails are send to workplace of resposible person maintained in ztable.
now user requirement is they want some intimation in their outlook for they got mail in workplace .
can anybody help me.
Thanks .
sushmita.k

they can either define automatic forwarding in their SAP office to external e-mail OR they can set their external e-mail as preferred method of communication and they should receive mail to their external mailbox assuming that sending to external mail is supported in your system (check with BASIS folks).

Can't send mail out...and can't figure it out

Hi, after 4 hours or researching, I have finally eliminated the setting issues down to one, can't send mail with outside (not within the company) recipient address. I get Relay access denied. I have done a lot of reading and playing with different settings, just can't get it to work. So I decided to ask for some help here.
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
inet_interfaces = all
luser_relay =
mail_owner = postfix
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains = dun.dnsrbl.net
messagesizelimit = 10240000
mydestination = $myhostname,localhost.$mydomain,localhost,justme.com
mydomain_fallback = localhost
myhostname = mail.justme.com
mynetworks = 127.0.0.1/32,192.168.1.5
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions = rejectmapsrbl
smtpdenforcetls = no
smtpdpw_server_securityoptions = login,cram-md5
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtlsloglevel = 0
smtpduse_pwserver = yes
smtpdusetls = no
unknownlocal_recipient_rejectcode = 450
I am running server 10.3.9 on a Xserve and Entourage as client. We have a valid MX record pointing at the right external address. And why is my result looks different than the others.....? This is nuts! Thanks in advance for any help or I will have to go back to the SunCobalt wich was working fine....
12 PB G4 1.33GHz/1.25GB, G4/1.3GHz x2/1.25GB, Mac OS X (10.4)

Change:
mynetworks = 127.0.0.1/32,192.168.1.5
To:
mynetworks = 127.0.0.1/32,192.168.1.0/24
Or...
Authenticate your SMTP connections.
Jeff

PROBLEM WHILE SENDING MAILS TO MUTILPLE RECIPIENTS

hi,
while sending mails to multiple recipients,if any one of the mail id is invalid the mail is not being send to other valid mailids,how can this problem be resolved , so that other than the invalid recipient mail has to be send to other valid mailids

COULD YOU PLEASE STOP SHOUTING?
CAN YOU TALK LOUDER, I CAN'T HEAR YOU!

Mail can't send mail on home network

I am trying to help a friend who wants to move from Entourage to Mail. He has a MacBook Pro with 10.6.4 installed and his company uses Exchange 2003. He is moving to Mail due to serious calendar and contact syncing issues through Entourage and his iPhone/iCal/Address Book.
I have setup his Mail account to use IMAP with the Exchange Server. He can receive mail this way, but he cannot send it. Actually he can only send mail when he is at work on his company's network. I have turned off SSL and authentication is through Username and Password.
Funny thing is that Entourage can send and receive mail anywhere he has a connection, but Mail cannot. His company's IT department says that the settings I have in place should work.
How can I further troubleshoot this problem? Is it a server problem? I know 10.6's Mail doesn't support Exchange 2003, but I am not looking for full integration of exchange services.

You may be SOL as you need an SMTP server to send mail and the IT folks may not have it set up. You need a proper SMTP relay to send the mail, period. It doesn't matter what it's called, though convention usually has it set to smtp.example.com. mail.example.com would more often be the address for IMAP or POP connections.
Regarding the inability to send mail from an external network, this is the same problem: You still need an SMTP server to send emails. It's just that the SMTP server on the external network is likely different than the corporate SMTP server. What external network is it, and what is the SMTP server they have set up for machines within their network? Note that many networks don't enable outbound SMTP for random clients due to SPAM reasons.

Can't send mail on other networks

We have been touring the country for two months now and find we often can't send mail (using Mail) on wireless networks in hotels and it happens when we are visiting friends as well. We can always receive mail, however. It's frustrating as we're keeping friends and family posted on our trip's progress. Any ideas??? We can send e-mail through our .mac account on the Apple web site but sending photos doesn't work as well.
Some hotel's systems work just fine.

Hello Frederick.
Most, if not all ISPs now block the use of SMTP servers that are outside of their network (or not provided by the ISP) on Port 25 which is the standard port used by SMTP servers.
Some ISPs allow the use of an authenticated SMTP server only (such as the .Mac SMTP server) on Port 25 but some block its use regardless.
These restrictions are in place as part of an overall effort to prevent spam emanating from the ISP's domain.
Some free wireless networks (at hotels) will allow using an SMTP server that is outside of their network on Port 25 if the SMTP server is not authenticated (and why is a good question if so) and in that situation, selecting None for SMTP authentication should work.
Basically, you need to check with the hotel or the hotel's internet service provider regarding their required settings for using an SMTP server that is outside of their network.
When visiting friends and connecting to the internet via their ISP, you can try the following:
Go to Mail > Preferences > Accounts and under the Account Information tab for your .Mac account preferences at the SMTP server selection, select the Server Settings button below.
Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
If this doesn't allow you to send mail with your .Mac account and SMTP server, you can try entering and using the SMTP server provided by your friend's ISP to send mail with your .Mac account which is invisible to all recipients.
When accessing free wireless networks at hotels, you can try using 587 for the Server Port for the .Mac SMTP server but as previously provided, you need to check with the hotel or the hotel's ISP to determine the required settings for using an SMTP server that is outside of their network.
If using 587 for the SMTP Server Port works, you should be able to keep this setting for the .Mac SMTP server when returning home. I use Port 587 for the .Mac SMTP server when connected to my ISP at home and I've also used it successfully when connected to a friend's wireless network via a different ISP.

Can't send mail to external recipients

Similar Messages

Maybe you are looking for