Can the Canon Pixma MX922 print pictures at only 4 x 6? If so, any other recommendations?

I am looking for a printer that primarily prints photos. I am looking for one that can various sized photos, hopefully from wallet size, to bigger. Any suggestions would be greatly appreciated!

OK. Understood. Easy Print Pro, which comes with the printer, will allow various layouts. You could do multiple wallet size on 4x6 or letter size.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Similar Messages

  • Can the Canon Pixma iP 5000 be used with Mac OS X Version 10.5.8 ?

    Can the Canon Pixma iP 5000 be used with Mac OS X Version 10.5.8 ?    Thank you

    Mail updates are usually part of OSX System Updates and no stand-alone updates.
    Try downloading and installing the 10.6.8 Combo Updater from here http://support.apple.com/kb/DL1399
    Stefan

  • Does OS 10 support the Canon Pixma mini260 printer?

    Does OS 10.10.1 support the Canon Pixma mini260 printer?

    The last driver that Canon released for this model was for OS X 10.7 and earlier. Here is a link to that driver. You may be able to install this driver on 10.10, although Gatekeeper will block its installation due to its digital signature. So you will have to right-click on the installer and select Open from the pop-up menu. You will then get the option to install the driver.

  • Can the Canon Pixma ix 6520 support manual duplex printing?

    I know that this printer doesn't support duplex printing but I was wondering how would I double side print manually with the canon pixma ix6520?
    Thanks!

    Hello thekay94.
    Manual duplex printing can be done by printing on one side at a time. 
    If you are printing from a Windows computer, please select the Duplex printing option in the Page Setup tab of the Printing Preferences menu.  If you are printing from a Mac, please use the options in the Layout menu to print the odd pages first, then load the stack back in the printer with the blank side facing you to print on the even numbered pages.
    If immediate assistance is needed, feel free to call us at 1-800-OKCANON.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Help!!!! I had to uninstall and then re-install the canon pixma mg3220 printer . Cannot find toolbar

    Help!  I had to uninstal and then re-instal the Canon Pixma MG 3220 printer.  Now, I cannot find the L shaped toolbar.  It doesn't exist.  Is there some way to get it installed on to my computer Windows 8.1????

    Do you mean Canon Quick Menu?  You can download it here:
    http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_print...
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

    Hi
    I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

    Do the following:
    Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
    Let the printer manage colors, not PSE
    Calibrate the monitor

  • I am attempting to connect my Canon Pixma MG5220 printer/copier/scanner to my MacBook Pro OS 10.6.8.  After loading software from Canon and attempting to print, I get the following message: NT_STATUS_ACCESS_DENIED.  What can I do to fix this?

    I just purchased and installed a Canon Pixma MG5220 printer/copier/scanner to my PC desktop with Windows XP.  It works fine.  It has been successfully installed on my network and I am able to use it with my laptop running VISTA.  However, I am trying to connect it to my MacBook Pro OS 10.6.8 and I am not having much luck.  I can see it as one of the printer choices when attempting to print; however, I get the following message:
    NT_STATUS_ACCESS_DENIED
    I have been searching for answers, but nothing seems to work yet.  Does anyone have any suggestions?
    Thanks.

    Let me understand:
    - you have purchased named canon, which is conencted to your PC running windows xp
    - downloaded driver for win xp, and canon works fine
    - canon is connected to that PC via USB
    - that Canon is also activated as network printer, by allowing print sharing in windows; how did you set that option?
    - now, you are in Mac OS x 10.6.8, downloaded Canon driver for Mac OS X, installed it, detected printer on the network, printer was installed; was it detected as attached to that PC running win XP? or not?
    or you set canon by being connected to your mac directly via USB?
    Now, there are some questions you should answer as some details are missing, and your initial text is not clear. Can you print if Canon is connected directly to your mac? did you try that? if not, do it before answering.

  • How do I remove the print head in a PIXMA MX922 printer so I can clean or replace it?

    How do I remove the print head in a PIXMA MX922 printer so I can clean or replace it? The printer clean and deep clean features will not provide print quality corrections.

    Hi Happy,
    To remove the ink tanks and print head from the printer, please follow the steps located here.  Please note that we do not recommend cleaning the print head using any other methods other than the ones built into the printer, as it may do damage to the printer.  If performing at least one cleaning and two deep cleanings on the printer do not resolve the issue, the printer may require servicing; please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Where can I find a tutorial for the Canon Pixma MG6220

    I am unable to make full use of the Canon Pixme MG6220 I purchased a few weeks ago. I am an 85 year old geezer and my old printer was pretty straight forward but had limited features whereas this Pixma 6220 is a great machine but I find it most intimidating to use some of its features and have had no luck in finding a tutorial online-------can anyone help me?????

    I dont know how I did it: I have found the manual, but it's extremely confusing. I am 70, not quite as old as the questioner.  I find this manual has too much content and I cannot find what I need (like almost every web page!). 
    We just bought the pixma MG6220 and have installed the driver on both our computers, and it's supposed to work wirelessly, and it does. Mine is a macbook air and we had to use the external drive to do the installation.
    But when it came to scanning photos in order to add them to the digital ones, the scanner could only find my husband's PC, not my macbook. I understand that you cannot simultaneously use both computers to scan. Do I have to switch off the other computer to use mine? Or do I have to attach the laptop with a wire to the printer. My laptop is near the new printer, but the husband's PC and modem are further away - but they work. I have spent several hours trying to solve this, which should have a very simple answer, but can find nothing. I didn't understand 99 per cent of the content of the manual, which is very disempowering. Could it not "hide" the more obscure content and make it accessible via specific links. I do not want to plug in the external drive every time I want to use the scanner or printer (I lose the mouse function).
    I also find it hard to navigate these community pages! What is tagging?

  • How can I get iMac to recognize Canon Pixma mp990 printer wirelessly?

    Although my Canon Pixma MP990 printer/scanner shows I've properly set it up for wifi, and the blue wifi light illuminates on the printer, my iMac now refuses to recognize that my printer is connected. Imac now shows the printer as offline.  When the printer was set up for corded/wired connection, the Imac worked fine with it. How can I get iMac to recognize the wireless printer setup? Thanks!

    Hi ..
    Click here >  Canon U.S.A. : Support & Drivers : PIXMA MP990
    Then click  Wireless Help
    Make sure the printer is recognized in System Preferences > Print & Scan > Print
    If not, download and install the drivers designated for the mp990 model.
    In the System Preferences > Print & Scan > Print window, click + (plus) to add the printer.

  • Can't add Canon Pixma MX310 printer with OS X 10.10.2 Yosemite

    I just got a new laptop that is running OS X Yosemite.  I have my Canon Pixma MX310 printer plugged in via USB but I can't add it.  When I go to the Add screen in preferences, in the default window, Canon MX310 series comes up.  When I select it, I have to "Choose a Driver" in order for the add button to not be greyed out.  Auto select is greyed out so I can only choose Select software which doesn't have anything for Canon or Other which is to select a downloaded driver.  Problem is, when I go to the Canon website to download the driver it says "There is no driver for the OS Version you selected. The driver may be included in your OS or you may not need a driver."  Any ideas?

    There is no driver for the OS Version you selected. The driver may be included in your OS or you may not need a driver."  Any ideas?
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download
    http://support.apple.com/kb/PH18614 OS X Yosemite: Reset the printing system
    What to do when you can't print
    None of the above works, contact Canon Support.

  • Cannot make Canon PIXMA MX922 fax to work with "Windows Fax And Scan" on Windows 7, 8.1

    I have Canon PIXMA MX922 multifunction printer installed wireless on iMac OS X Mavericks. It works great but there is no fax drivers for Mac. I have Windows 7 and Windows 8.1 installed on Parallel Desktop. I am able to print and scan on these machines. I can scan using "Windows Fax and Scan" and other programs including My Image Gardens but no luck with faxing. I can send faxes using print function and chosing a Cannon MX920 series fax driver. The problem is to recieve faxes. I've connected MX922 wireless and wired with no help.
    Does anyone have the same problem? Any ideas?

    Hi Anton,
    thank you for your advice.
    In case this is going to fix itself in 25 hours I will check for the issue then. I'm gonna let you know whether the issues has disappeared.
    But it sounds to me a little bit, like you have been expecting that behaviour? Have you? Especially within a Lab it is very confusing to have test clients which appear fully functional 25 hours after the setup has been succeeded.
    I've followed your annotation and posted the log files on the Connect portal.
    Thx
    Peter

  • I desperately need help installing Canon Pixma ip6000D printer in Windows 7 64-bit

    My software CD (drivers, etc.) will not work with Windows 7 64-bit. I have tried running it in Windows XP compatibility mode, but it says it is made for 32-bit and will not work with 64-bit. Canon's website says it has an add-on module, but it doesn't have
    the printer driver, and it says "Your printer must be installed via Microsoft Update before you download and use this module." I have tried to find a way to install the printer via Microsoft Update, But I can't find any information
    about how to do this.
    I have also done searches for the canon pixma ip6000d drivers for windows 7 64-bit, but all the results I have seen say that they are an add-on modules.
    I would GREATLY appreciate any help with this.

    After doing some more digging, I found a solution, and hopefully it will help anyone else who is having problems. Go to this page:
    http://windows.microsoft.com/en-US/windows7/Install-a-printer
    You can manually install the printer by following these instructions. If the model of your printer does not show (mine didn't), click the update button. It will take several minutes (maybe longer if you have a slow internet connection), but eventually it
    will bring up a new list of printers. Just choose your printer and follow the instructions. My printer is working fine now.

  • Can a canon pixma MG6120 be used wirelessly with an ipad 3

    Apologies if this is a naive question, but I'm totally new to the iPad / Apple environment & am having a hard time finding out a) if my new iPad 3 (Wi-Fi & 3G) will connect with My Canon Pixma MG6120 printer that is set up with my PC desktop computer; &, if it will - b) where can a decidedly non-techie AOP find simple step-by-step instructions to walk me through the procedure?

    Below are some of the Apps which would support printing for non-Airprint support printers.
    I have used ePrint, is quiet ok. But still using third party app is a pain
    Air Sharing HD
    ePrint
    PrintCentral for iPad
    Print Magic HD
    PrinterShare Mobile

  • How do I set high resolution on my Canon Pixma 600 printer?

    How do I set high resolution on my Canon Pixma 600 printer? Also the copies from my computer look ok, but when I copy them from the printer, I can hardly read the print. Any help out there? Thanks , Martha

    Hello mlshouse1758.
    Additional troubleshooting will have to be done to narrow down the cause of your copy issue.  Please contact our support group using the "Contact Us" link below for additional assistance.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for