Can we run parallel data collections to collect multiple source instance.

Hi,
We have a business requirement where we will have multiple Source(ERP) instance and single Destination(ASCP) instance. We would like to check if we will be able to run Data collections in parallel to collect multiple EPR instance in the same time window. This is to reduce the total planning process time duration as following data collections we will be required to run multiple plan runs.
Please help me with your expert comments
Rgds
Sid

You may instead use Continuous collections to save on time so it can run collections from both instances periodically throughout the day thereby reducing a single timespan to collect all the data.
Thanks
Navneet Goel
Inspirage

Similar Messages

Can I run adobe master collection in a windows partition on a basic mbp 13" with only the intel chipset?

can I run adobe master collection in a windows partition on a basic mbp 13" with only the intel chipset?
I want to install 16 gb ram but I don't think I can change the lack of video card. I wanted this basic machine because it has fairly long battery life. I don't need or want retina at this time. My model is the mid 2012 model. I am running the adobe collection for mac, I want to run the windows versions. Is it possible? What is the most ram I could access using something like fusion 5, assuming I could get fusion 5 to work? would it refuse to run because of the intel chipset and lack of video card?
If I'm wrong and there is a way to add a video card to this model, could some version of fusion and windows 7 access more than 2 gb operating ram?
What cost would I be incurring, and would it be cheaper to buy a windows laptop with more ram than I could access via a virtual machine?
I want to work on a client's work in the windows versions of the creative suite, with occasional usage of after effects for windows, and to use some web plug-ins only available in windows versions, and to try some windows-only video and audio software.
thanks for any suggestions. While many people have told me I can run everything on my macbook, I am concerned about what I think is a limited amount of ram that can be accessed over the virtual machine partition softwares, and I don't know if what I want to attempt is actually possible.
My mbp os is 10.8.2 on a 2.5 GHz intel core i5 4 gb 1600MHz DDR3 with 500 hard drive. the basic 13" mid 2012 machine.
I'm hoping to install 16 G of opertating ram to allow more adobe programs to run concurrently- just when I am working on the mac side.
also, off track but, for years I have wanted a small machine that is more easily portable than my 15" machines. I have only had this used machine for a few weeks, but already I have been very satisfied and used it for presentations at clients. I don't want an air because I really want the dvd burner and player. No matter what apple says about wireless, there are decades of legacy work stored on optical discs all over the world, and I don't want to be unable to open something at a client's office because I don't have a dvd drive. Additionally, I have very large files I want to transfer via ethernet or firewire so that the transfer will take less time and be more secure than wifi. I resist apple's trend to make every machine a disposable toy that is viable only a year or so. I have read reviews that label the mbp it a poor value compared to the air. If all you need to do is text and communicate via wifi, many devices will sufice, and an air is certainly the most elegant. But what about the cost of large ssd's and protecting the drive against damage from shock? I want to be able to move this thing around and the small size is much safer inside my padded bag when I sit in narrow airplane seats, crowded trains and other congested spaces. I am much more likely to be able to borrow a large screen in a client's office ( with the use of one of the three adapters I had to buy) than to be able to borrow a dvd drive that has drivers for mac os 10.8.2. I suspect this may be the last generation of machines that have optical drives and ethernet, and that was why I purchased it so that I could continue to do work into the next few years. I am impressed by the retina display, but I need long battery life. And as beautiful as the retina display is, it is even more of a problem when trying to cross platform with the windows world. I wish I could infuence apple to do a trial product flow for a machine designed to work with 80% of the business world that uses windows. How spectacular that would be. With all their expertise and adept hardware design, to create a machine that cross platforms better than a windows machine itself works? Now that would be an accomplishment. Instead of 8 or 9 percent of the total computer sales, why not aim for a higher percentage? Smart devices will keep moving toward portable computers in power, anyway.

confused, bothered and bewildered wrote:
can I run adobe master collection in a windows partition on a basic mbp 13" with only the intel chipset?
I want to install 16 gb ram but I don't think I can change the lack of video card. I wanted this basic machine because it has fairly long battery life. I don't need or want retina at this time. My model is the mid 2012 model. I am running the adobe collection for mac, I want to run the windows versions. Is it possible? What is the most ram I could access using something like fusion 5, assuming I could get fusion 5 to work? would it refuse to run because of the intel chipset and lack of video card?
If I'm wrong and there is a way to add a video card to this model, could some version of fusion and windows 7 access more than 2 gb operating ram?
What cost would I be incurring, and would it be cheaper to buy a windows laptop with more ram than I could access via a virtual machine?...
Fusion should work on your machine and if you put 16 GB of RAM in (see http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3_160 0MHz_SDRAM), Fusion can access a good portion of that. Also, in a Virtual Machine, the guest OS is presented with Fusion's video card emulation, not what's in hardware on your Mac. Of course, finding Windows 7 now that Win 8 has been released could take some doing and the Win 8 Pro upgrade price is supposed to jump to $200 the end of the month. Add that to the price of Fusion and the extra RAM and you're beginning to get into the realm of low end real PC's.
As to cross platform, I assume you're aware of BootCamp (http://support.apple.com/kb/HT1461).

Can I run adobe master collection in MacBook Air 11.6"?

Can I run adobe master collection in MacBook Air 11.6"?
I am thinking to use MacBook Air 11.6" to do some graphics design work, those model support adobe Illustrator, PhotoShop and Dreamweaver?
the size is perfect for me that is the point.
thank you ..

Hi, thank you for you answer, Yes I am talking about the 2012 11.6 1.7GHz Ivy Bridge processors. I like Macbook Air 11.6 because is light and small, but I was looking comments to use this small notebook to design is not for bigest proyect. what about after effects simples proyects 30 seconds. I would like use this one outside and to keep the MacBook Pro home, much people say MacBook Air is for simples task I dont believe.

Can you run Parallels on MAC Mini

Can you run Parallels on MAC Mini

You haven't told us what version of Parallels you want to use, but here are the system requirements for the newest version.
http://kb.parallels.com/en/116539

Upgraded to lion but now can not run parallel desktop.

upgraded to lion but now can not run parallel desktop. The message show can not load parallel drivers.
Anyone can solve it?

Do you have Parallels Desktop 6? That is the version you need to have it run under Lion.

Can I run parallels in the new MBA?

I am interested in buying the new released MBA but I was wondering if the new machine has enough power to run parallels.

Yes it will run parallels, even the old model will run parallels. The only limitation in the past was hard drive space. The only current limitation is the amount of RAM available.

Can I export the data collected in a PDF Form to a Word Template?

I work in the legal field and constantly have to draft the same legal documents over and over. I would like to creat a form that allows me to collect the data I fill in as well as export that data into the word templates for legal document drafts. Is this possible?

Hi,
The Acrobat Forms forum would be a better target for your question:
http://forums.adobe.com/community/acrobat/forms
Regards,
Brian

Can I run parallels 8 on 3tb fusion drive on 2012 imac?

Just trying to finalise order for new iMac but want to understand if there's a limitation on drive size when using Parallels to create a win7 environment...read stories of Bootcamp only working on 1TB drive but is this the case with Parallels?

You posted in the iPad forum, by the way. Just FYI for future questions.
Regards.

How can I change the date or location of multiple photos in Photos OSX?

In iPhoto it was easy to change the date, description, title or even the location of a bunch of photos at the same time, is it possible to make it in the new Photos App?

It's possible to adjust the date and time, and pretty much the same way as in iPhoto. For the others, search the Photos forum, folks have posted Applescripts that will help.
http://www.apple.com/feedback/photos.html is the place for feature requests and feedback

Customer Name on Sales Order not in Data Collections

Hi,
I am looking for some help. My company just did an upgrade from 11i to R12 in the middle of May. As part of the upgrade we installed ASCP. We have noticed that certain customers are not being collected when running Standard Data Collections. We have open sales orders in the system for the customer. The sales order are being collected properly and appear in the plan. When we show the Customer field in the 'Supply/Demand Screen' in ASCP, the field is blank for select customers. Is there anything on the customer master or sales order line that would prevent the customer name from being collected? Any insight would be helpful.
Thanks
Rich

You can go to order organizer screen select the OA NO which you are not able to see in the ASCP workbench, go to line items---using show field get the Demand visible
tab on screen-----default value should be 'Y' if blank then then that could be the one of the reason.

How to perform Data Collection on single SFC with QTY = 1 with material lot size 1?

Dear experts,
We are working with SFC qty>1 on a relaxed routing. At a given operation we want to collect the data on single quantity; i.e. SFC qty on that operation, where the collection will happen, will be 1.The corresponding material lot size is for ex 10. The operator must be able to collect data on SFC with qty=1 multiple times until the quantities will be consumed. He must be also able to collect other values on the remaining quantities on the same operation with the same DC group or other DC groups. How many times the data must be collected is dependent on the shop order build quantity. The data may be collected several time but not more than the build qty. In other words some specific data will be collected on a qty of a product while others will be collected against remaining quantity. The data collection must be also done in a serialized manner.
Here's what we have set up so far:
1) 3 DC groups, each DC group has 3 data fields.
2) Each data field has the following restrictions: Required Data Entries = 0 and Optional Data Entries = 1
3) All DC groups are attached on the same combination of operation\material\routing
4) we are using relaxed routing
Process description:
The operator must be able to collect any data field on single product. For that he will enter the operation where the data collect are attached, he will enter the SFC with qty=1 then he will run the data collection after selecting the appropriate DC Group and entering the needed information. The operator will complete the SFC with qty=1.
The operator will pick the next product, select the same SFC and enter qty 1 and collect other value against this product.
Problem is:
Once the first collection is done on a given SFC with entered qty=1, the system is not allowing the operator to do further collects on the same SFC with qty=1 or any other quantity. He cannot select any DC group from the DC group list. We tried also with the table selection menu on the DC Group list but nothing can be selected.
So we tried to play around with the DC group definitions as follows:
A) we set Required Data Entries = 0 and Optional Data Entries = 10. Still the operator was not able to select any DC group after collecting data the first time. We tried to reopen the pod and list again. But we get the same blocking behavior.
B) we set Required Data Entries = 10 and Optional Data Entries = 1. The operator was able to select the DC group after collecting data the first time. BUT operator must enter the data fields 10 times on one SFC quantity, which is not what we want. Besides again he cannot collect other information on remaining quantities on the same operation.
C) There's an option to serialize the SFC before reaching the operation where the collection is happening, then merging ofter complete. Automation is needed here; hence customization. We are highly avoiding customization now, since we expect the data collect to work well on single quantities even when the main SFC has qty>1
Questions:
1) Are we missing any kind of further configuration\setup?
2) Or the current system design does not allow collecting data on single quantities of an SFC which main quantity is greater than 1?
3) Looking at this link Approaches to Collection of Data - SAP Manufacturing Execution (SAP ME) - SAP Library, there's nothing mentioned about same SFC number with multiple quantities!!!
We are using SAP ME 15.0.3.0.
Thanks in advance for your help
Ali

Ali
to collect data for the same SFC multiple times, your system rule "Allow Multiple Data Collection" needs to be set to true for the site.
Stuart

Campus Data Collection

Is there a way to run Campus data collection immedeatetly as oppose to running it from the the schedule? I can't seem to find this option in LMS 3.2.

The option is available from the Campus Manager home page as seen on the screenshot below.

Campus Data Collection on idle state

Hi, Clarke. Please help me with a problem about campus data collection on lms 3.2
I tried to run a data collection on campus manager home page. but ever i did i got idle state, and ANIserver have the flag busy.
I read in your answer to other guys and you say there are a patch. how i can get that patch?

You need to upgrade to Campus 5.2.1. You can do this from Common Services > Software Center > Software Update.

Problems with Data collection in CM 5.0.6

Hello:
I have installed LMS 3.0.1 and CM 5.0.6, and I have some problems with CM:
-Although data collection is scheduled, this does not run.
I try to launch it from CM menu, it asks if I want the collection of all devices or the new ones.
I try the two options but it does not do anything.
-I can launch the UT acquisition but it does not collect all the hosts.
I compare the configuration of the devices that "works" and the others and dont see no difference.
-The UT acquisition does not discover our Ip phones.
-In data collection settings there are 5 devices that are included but not managed.
-When I restart the server the data collection works fine, but the next day it doesn't work.
Thanks!!!

Hi,
As suspected, Campus Manager 5.0.6 hitting a bug as found the following exception in ani.log :-
2011/03/14 15:05:40 Discovery ani ERROR AniTimeLine: TimeBase Discovery caught exception: java.lang.NullPointerException
java.lang.NullPointerException
    at com.objectspace.jgl.HashMap.put(HashMap.java)
    at com.cisco.nm.ani.server.core.PortDetailsXml.populatePortData(PortDetailsXml.java:109)
    at com.cisco.nm.ani.server.core.DiscoveryTimeBaseImpl.generatePortDetailsXml(DiscoveryTimeBaseImpl.java:104)
    at com.cisco.nm.ani.server.core.DiscoveryTimeBaseImpl.postPerformScheduledFunction(DiscoveryTimeBaseImpl.java:81)
    at com.cisco.nm.ani.server.frontend.AniTimeBaseImpl.execute(AniTimeBaseImpl.java:48)
    at com.cisco.nm.ani.server.frontend.AniTimeLine.executeTimeBase(AniTimeLine.java:317)
    at com.cisco.nm.ani.server.frontend.AniTimeLine.runSchedule(AniTimeLine.java:350)
    at com.cisco.nm.ani.server.frontend.AniTimeLine.run(AniTimeLine.java:366)
    at java.lang.Thread.run(Thread.java:595)
BUG ID = CSCtd49439
link to view bug at Cisco.com
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtd49439
You need to contact TAC for the patch.Kindly click on Action --> open Service Request and it will put all these notes and logs of this thread to the TAC case.
Once the data collection issue will be fixed and the correct number of devices being data collected properly, then you need to make sure to add "Call Manager" to Common Services with the community string credentials and run the data collection and UT Acquisitions to get the IP Phones discovered.
Thanks,
Gaganjeet

Standard Data Collection Failing with Error ORA-04054: database link does not exist.

Hi Gurus,
When I am running Standard Data Collection in ASCP(APS) instance R12.1.3, its failing with error : ORA-04054: database link does not exist.
There is no such Database link exits which is showing in above error.
Also the database link name in the above error is not profile values in the database.
I think, concurrent might be fetching this database link name from some tables related to plan.
I am not having much knowledge about how this ASCP/APS works.
Need your help to resolve this issue.
Thanks,

Hi,
ASCP Collections looks at the dblink from instances definitions from.
1. Responsibility: Advanced Planning Administrator
2. Navigation: Admin > Instances
You may review the note in support.oracle.com - Understanding DB Links Setup for APS Applications - ASCP and ATP Functionality (Doc ID 813231.1)

Can we run parallel data collections to collect multiple source instance.

Similar Messages

Maybe you are looking for