Cancelling or removing the scheduled job

HI,
I have job running ...i made use of the following SQL statements
  Select * from All_scheduler_jobs;
  select * from USER_SCHEDULER_JOBS;
  select * from user_scheduler_running_jobs;And i see the job is running ...How do i cancel or remove the job ??
Thank you!!

Hi,
calling dbms_scheduler.disable will prevent a job from running again, but it may still be running and may still exist.
To stop a running job you can use dbms_scheduler.stop_job and top drop a job you can use dbms_scheduler.drop_job.
To make sure you are dropping the right job, select owner and job_name from all_scheduler_jobs and use 'owner.job_name' instead of just job_name.
For further scheduler questions, you can use the scheduler forum here.
Scheduler
Hope this helps,
Ravi.

Similar Messages

  • Cancel the scheduled jobs for process chains - urgent

    Hi,
    How do I cancel the scheduled jobs for process chains which are going to run tonight.
    thanks,
    Radha

    Hello,
    Go into transaction code RSPC and then select the particular process chain by going into the edit mode and in the menu...
    Look for Execution --> Remove from Schedule.
    Let me know if that answered your question.
    Thanks
    Dharma.

  • Credit Release thru VKM3 remove the schedule line delivery block ...

    HI Gurus,
    I have created the sales order with the delivery block at the schedule line. i have save the order . The order goes to the credit block . So when i release credit block with the help of VKM3 then system also removes the schedule line level block.
    This is not std behaviour . Can any one come across such scenario ?
    Details: I have removed the routine 101 in the OVB8 so that if order goes to credit block still order will have the confirm qty.
    Also in the OVAK order type is mark D for automatic credit check.
    Thanks in advance

    Hi ,
    I have checked the sales order thru the program but we are not using any user exit for the same.
    Now i have found that if the qty is confirm on the first date i mean on the date given then system does not remove the block & if the ATP check suggest the diff date so there are two schedule line in this case block get removed ..
    May be this is like after credit removes system must be running the ATP check again ..
    Please help

  • Possibility of deleting the scheduled jobs through reports

    hi friends
    is it possible to delete the schedule jobs through report making?
    i mean i have to enter a particular user name
    list of jobs scheduled by him has to be listed
    and selecting the unwanted job have to delete all the jobs
    Thanks and regards
    s.janagar

    Jangar,
    Yes. This can be done. Write a delete statement and use it on the table TBTCO.
    Note: Any other operations can be done on the tables TBTC*
    Thanks,
    Babu Kilari

  • How do we stop the scheduled job ?

    Hi all,
    how do we stop the scheduled job if it is already been  scheduled and running in the background.
    please send your suggestions,
    Rajesh.

    Hi Rajesh
      Each and every job is associated with a Job Number, you need to specify the exact number to extract the correct details.
      Please check table: <b>TBTCO</b> for the same. For more details refer to tables of pattern TBTC*.
    Kind Regards
    Eswar

  • Howto remove the old job server?

    For Data Integrator, the job server information is saved in the repository.
    The job sever is called Dev01_job_server in Machine Dev01 with DB2 respository
    Instead of export/import the job, I cloned the repository database to another DB2 server, Dev02, and install a new Data integrator. Since it is new installation, I create a new job server called Dev02_job_server.
    The strange things happened that when I run DI job in Machine Dev01, I can see job log in Dev2's DI designer. it seems that they are clustering now.
    How can I remove the Dev01_job_server entry in the Dev02 Machine's repository??

    Hi Werner,
    It works. Thank you so much.
    Anyway, is it the official solution? Since the client needs document to prove else it is too risky at the client's aspect.
    Kelvin.

  • Where is the scheduled job?

    This scheduled job starts at 22:00 every day on the Linux server.  it creates snapshot on a remote storage via ssh,  and here is what I found in the log about the job on the remote node:
    Sun Nov 10 22:00:08 EST [remote_node: rshd_0:debug]: [email protected](linux server ip)[email protected](ip)_37397:IN:ssh2_37397:IN:ssh2 shell:SSH INPUT COMMAND is snap create hourly_11-10-2013_22-00
    It seems root cron job is the only cron job under /var/spool/cron on this Linux server. However, I can not find the script which started at 22:00 at all, nor any script with such function. the following is the only line at 22:00pm in /var/cron/log
    Nov 10 22:01:01 phoenix crond[24352]: (root) CMD (run-parts /etc/cron.hourly)
    However, there is no any scripts with such function in /etc/cron.hourly neither.
    Please help me out where this schedule job possibly located on the linux server.
    Thank you in advance!

    Understand all you are saying here.
    I have already talk to NetApp support. They are right that the action on the storage is definitely triggered by this linux server "phoenix". The following message has clearly stated that:
    Sun Nov 10 22:00:25 EST [netappname: rshd_4:debug]: [email protected]_37412:IN:ssh2 shell:SSH INPUT COMMAND is snap create vol1 vol1_nightly_11-10-2013_22-00
    159.3.99.146 is the ip for the linux server "phoenix".
    However, they can not tell me more since it should be found out on the linux.
    The problem is that I could not locate the script either by searching crontab jobs or any anacron as you explained.
    root is only user who has cron job. I checked everysingle line, not only there are no such scripts, also there are no any jobs will ge kicked at 22:00 as the time when the action is started.
    I also searched /etc/cron.hourly. there is only one script, and it does nothing about that action.
    so, i don't have a clue about what and where the script possible is...

  • Problem while running the scheduled jobs?

    Hi any body know the reasons for this?
    1) one job got cancelled with error "ABAP/4 processor: SPOOL_INVALID_JOB,
    log:
    "The current ABAP program had to be terminated because the ABAP processor detected an internal system error.
    The current ABAP program "RSPPFPROCESS" had to be terminated because the ABAP processor discovered an invalid system state."
    2) second job got cancelled with error "system exception ERROR_MESSAGE    UNCAUGHT_EXCEPTION      CX_OS_DB_UPDATE seems there is some problem in updating the table PPFSTRIGG".  but  PPFSTRIGG is not table it is structure.
    when next execution of these jobs there r working fine.
    no runtime errors

    hi prakash ramu,
    even it is not working. it is directly talking me to spool request..
    i think it is not possible, while ur running the report in background.,
    any how if possible could u pls send me the code...
    thanks
    ramu

  • Canceling or removing the $10 messaging bundle

    So a couple weeks ago I used a 10 dollar message bundle card, yesterday i added a $15 verizon refil card to my cell phone and the amount that showed up was only 5 dollars, i want my full $15 on my acount and the messaging bundle removed. HELP ME PLEASE!!!!!

    You probably need to call prepaid CS to see if they can correct the issue.  You can dial *611 from your prepaid handset to reach them.

  • Queue full in the at job

    Help!
    I have some jobs need to run scheduled by at job.
    But now I find many strange files with the prefix "_" such as "_at19705" appear in the /var/spool/cron/atjobs.
    Then the /var/cron/log shows that the max value of the queue is rearched. But I have augmented the value in /etc/cron.d/queuedefs to 100 which is enough for my jobs to run at the same time. It seems that many at jobs generated at the same time so that the value is excessed. The scripts to run the jobs should be correct.
    Now my question is why those stranges are generated.
    Have you met such situations before? I will appreciate you very much if you could give some good ideas to tell me.

    Hi,
    This will happen if you use any shell/perl script to schedule at jobs .The script might be executed in loop like 'for' or while or until and It may not have exit to comeout from the loop .Please check for the syntax and correct it .If you found anything wrong with the script you executed , please use 'atrm' instead of 'at' to remove the scheduled jobs from the atqueue.Then you can reschedule it from command prompt individually.
    Hope this helps,
    Rgds,
    Dhana_slash.

  • How shall I cancel /kill the Batch job that is to be scheduled daily in BI.

    Hello Experts,
    We have a background batch  job used to trigger an event to execute the Porcess Chain that is to be scheduled daily in BI.
    Now we don't required this functionality any more.So I try to cancel this job using transaction SM37 but unfortunately I am not able to cancel/ kill the job.
    How shall I handle this issue.  
    any suggestions please.
    Thanks & regards

    Hi
    Select your process chain in the planning view
    Right click on the start varaint and display all jobs,
    It will show you the job scheduled, Finshed everything.
    Select the job which is scheduled or released and Delete the job.
    Else go to SM37 , enter the job, delete the scheduled job there.
    Regards
    M.A

  • Disable scheduler jobs during the database refresh

    Chaps,
    I have a strange issue. We have certain jobs scheduled which monitor other jobs and when they aren't running, they send emails using utl_smtp to the whole DBA group. All is working fine on Production but the moment we restore the database to QA, and soon after the database is recovered, it sends an email saying the those jobs aren't running..
    How do I disable the scheduler jobs ? Can it be done while the database is in mount state ? Or, is there any parameters to do so ?

    Hi,
    Although you can't disable the entire scheduler, you can disable individual jobs or all jobs in a job class using dbms_scheduler.disable which will prevent the jobs from running (but not stop already running jobs).
    It should be straightforward to have a table of jobs that should be disabled and have procedures which run over the table either disabling or enabling them.
    -Ravi

  • What is the best way to export a .csv/.txt file to a MS Windows shared folder via a scheduled job?

    What is the best way to export a .csv/.txt file to a MS Windows shared folder, when the export process is a scheduled job?

    You can't directly, as scheduled jobs can only export to server-side data stores, which can only write to the landing area. You'll need to use an external script (e.g. batch file) to move the file from the landingarea after export. You can use an external task in the scheduled job to invoke the script.
    regards,
    Nick

  • Event based scheduler job - 2 events at the same time only 1 run

    Hi,
    i converted our dbms_job - jobs to the newer package dbms_scheduler.
    It is a 10.2.0.4 patch 23(8609347) database on an windows server 2003 R2 Enterprise x64 Edition SP2.
    The Jobs(about 130) are nothing special ... only some statistics, matview-refreshes and so on.
    For the notification of failed jobs and jobs which run over the max_run_duration i downloaded and installed the job notification package.
    The jobs are assigned to different departments and the corresponding developer teams in our company.
    I created a notification job for each department and if a job fails we (the database administrators) and the corresponding deverlopers will be informed.
    Now i ascertained that only 1 email will be send if 2 jobs of the same department fails at the same time.
    The emailer-jobs are auto-generated by the job notification package. I only modified them to look after all jobs of special department and not only after one job. (--> event_condition ... object_name LIKE 'XXX%')
    example for dba-jobs(copy of the script output of TOAD):
    SYS.DBMS_SCHEDULER.CREATE_JOB
           job_name        => 'DBA_JOBS_EMAILER'
          ,start_date      => NULL
          ,event_condition => tab.user_data.object_name LIKE ''DBA%'' AND tab.user_data.event_type in (''JOB_FAILED'',''JOB_OVER_MAX_DUR'')'
          ,queue_spec      => 'SYS.SCHEDULER$_EVENT_QUEUE, JOB_FAILED_AGENT'
          ,end_date        => NULL
          ,program_name    => 'SYS.EMAIL_NOTIFICATION_PROGRAM'
          ,comments        => 'Auto-generated job to send email alerts for jobs "DBA%"'
        );I thought that a queue is used to manage all events from the scheduler jobs. So i made a test with 2 dba jobs and simulated a failure at the same time but i received only one mail.
    So what is happend with the second event? I looked for the events in the qtab(SCHEDULER$_EVENT_QTAB) which belongs to the event queue(SYS.SCHEDULER$_EVENT_QUEUE) and no event was missing.
    So i think the emailer job has to run 2 times.
    Is anyone able to explain or to find my mistake?
    I know that the easiest way is to create one emailer job for each normal job but i think this is a little bit costly because all the arguments are the same for one department.
    Thanks & Regards

    Thanks for your fast answer.
    You are right with the "enabled => TRUE;" part and i only forgot to post it.
    So the Job is enabled (otherwise it would not send any mail). Because it is sending one mail i think it is also not necessary to hand over a job_type.
    Additionally the job starts a program ... so it is right to set the job_type='STORED_PROCEDURE' isn't it?
    And also right ... i already added the agent as subscriber to the queue.
    Anyway i think the whole thing do what it have to do. So in my oppinion there are no big mistakes in creating the job or at adding the subscriber.
    There are also no problem in raising the events by itself and enqueue them in the scheduler event queue.
    There is only a problem when 2 jobs fails (or run out ouf max duration) at exactly the same time.
    If i understand it right:
    The agent/subscriber will find the "JOB_FAILED"-event for the first Job in the queue and starts the emailer Job.
    The agent will also find the "JOB_FAILED"-event for the second Job and wants to start the emailer Job again.
    I don't know if this is really the problem but perhaps the emailer-job can not be started in consequence of the second event because ist is already running.
    I also don't know if this is a mistake of the agent or of the emailer-job by itself.
    I only want that it runs two times (one run for each event). I my case it also doesn't matter which email is send at first.

  • Which are the required roles/privs for viewing all scheduler jobs in OEM?

    Platform: Oracle 11.1.0.6 Enterprise Edition (64) Windows 2008 R2 Server
    - I've created a new Admin user in "OEM>Setup>Adminstrators>Create"
    - I checked the user in "OEM>Server>Users":
    CREATE USER "SA_ADMIN"
    PROFILE "DEFAULT"
    INDENTIFIED BY "saadminsa"
    DEFAULT TABLESPACE "SYSAUX"
    TEMPORARY TABLESPACE "TEMP"
    ACCOUNT UNLOCK;
    GRANT SELECT ANY DICTIONARY TO "SA_ADMIN";
    GRANT "MGMT_USER" TO "SA_ADMIN"
    - "SA_ADMIN" was granted only the permissions above.
    - I can log in OEM as "SA_ADMIN"
    - I can see OEM backup jobs and the history
    - But I cannot see any "scheduler" jobs in "OEM>Server>Jobs"
    - I get a lists of the jobs in "OEM>Scheduler Central" but I cannot display any more information of "scheduler jobs"
    - I logged off from OEM
    - I granted SCHEDULER_ADMIN role to "SA_ADMIN"
    GRANT SCHEDULER_ADMIN TO "SA_ADMIN";
    - I logged back in OEM as "SA_ADMIN
    - I can now see some scheduler jobs, but not all of the jobs, I still cannot see any of the new jobs I created logged in OEM as SYS.
    Which are the required roles/privs for viewing all scheduler jobs in OEM?

    if you grant "SYSDBA" to the new Admin user then you can see the "scheduler" jobs.
    GRANT SYSDBA TO "SA_ADMIN";
    I wanted to grant "read" access in OEM for the new user.
    This behaviour is strange.
    Without the "SYSDBA" role the new user can see the OEM backup jobs that were create in as SYS, but it cannot see the "scheduler" jobs.

Maybe you are looking for

  • Automatic navigation after "END" button depending on in- or outbound call

    Hi all. the requirement is: In the case of inbound calls - the agent starts working on an item of the inbox and clicks on "END" when finished - the navigation should automatically bring him back to the inbox. But if he starts with the account identif

  • How can I find all documents encrypted by a certain application?

    I don't think Spotlight can help with this, so I am trying to use the ordinary Command-F(ind). I know there's a parameter option "Created by [application]" but that doesn't work, even though the Info window shows the Kind as this application. The spe

  • Today() generating error when used in an expression

    I am using today() as part of an expression to generate a conditional running total.  It is producing an error in the report output. =RunningValue( IIF( (not(IsNothing(Fields!PPAP_Sent_Date.Value)) and (Fields!PPAP_Sent_Date.Value <= Fields!PPAP_Requ

  • WebService SOAP response problems

    hey, I'm developing a WebService, using EJB's. I have a session bean, which has several methods. One of them returns, say, a class like follows: class TeamDTO implements Serializable { private String name; private Integer teamId; //getters and setter

  • ISW 6.0 - repeated attempts to authenticate as "guest"

    I have a deployment of ISW 6.0. In my isw-broker log.txt file I repeatedly see the following: [14/Aug/2009:02:11:50 PDT] WARNING [B2130]: Login Failed: com.sun.messaging.jmq.auth.api.FailedLoginException: [B4068]: DN not found for user guest in repos