Queue full in the at job

Help!
I have some jobs need to run scheduled by at job.
But now I find many strange files with the prefix "_" such as "_at19705" appear in the /var/spool/cron/atjobs.
Then the /var/cron/log shows that the max value of the queue is rearched. But I have augmented the value in /etc/cron.d/queuedefs to 100 which is enough for my jobs to run at the same time. It seems that many at jobs generated at the same time so that the value is excessed. The scripts to run the jobs should be correct.
Now my question is why those stranges are generated.
Have you met such situations before? I will appreciate you very much if you could give some good ideas to tell me.

Hi,
This will happen if you use any shell/perl script to schedule at jobs .The script might be executed in loop like 'for' or while or until and It may not have exit to comeout from the loop .Please check for the syntax and correct it .If you found anything wrong with the script you executed , please use 'atrm' instead of 'at' to remove the scheduled jobs from the atqueue.Then you can reschedule it from command prompt individually.
Hope this helps,
Rgds,
Dhana_slash.

Similar Messages

FBU Internal Job Queue Full for Synchronous Processing of Print Requests

Hello All,
We are getting a lot of errors in system log (SM21) with the
Error : FBU Internal Job Queue Full for Synchronous Processing of Print Requests
User :SAPSYS
MNO:FBU
=============================================================
Documentation for system log message FB U :
If a spool server is to process output requests in the order they were
created using multiple work processes, the processing of requests for a
particular device can only run on one work process. To do this an
internal queue (limited size) is used.
If too many requests are created for this device too quickly, the work
process may get overloaded. This is recognized when, as in this case,
the internal queue is exhausted.
This can only be solved by reducing the print load or increasing
processor performance or, if there is a connection problem to the host
spooler, by improving the transfer of data to the host spooler.
Increasing the number of spool work processes will not help, as
requests for one device can only be processed by one work process. If
processing in order of creation is not required, sequential request
processing can be deactivated (second page of device configuration in
Transaction SPAD). This allows several work processes to process
requests from the same device thus alleviating the bottleneck.
Enlarging the internal queue will only help if the overload is
temporary. If the overload is constant, a larger queue will eventually
also be overloaded.
===========================================================
Can you please tell me how to proceed.
Best Regards,
Pratyusha

Solution is here:
412065 - Incorrect output sequence of output requests
Reason and Prerequisites
The following messages appear in the developer trace (dev_trc) of the SPO processes or in the syslog:
S *** ERROR => overflow of internal job queue [rspowunx.c 788]
Syslog Message FBU:
Internal job queue for synchronous request processing of output requests full
The "request processing sequence compliance" on a spool server with several SPO processes only works provided the server-internal job queue (see Note 118057) does not overflow. The size of this request queue is prepared using the rspo/global_shm/job_list profile parameter. The default value is 50 requests. However, if more output requests arrive for the spool server than can be processed (and the internal request queue is full as a result), more SPO processes are used to process the requests (in parallel), and the output sequence of the requests is no longer guaranteed.
Solution
Increase the rspo/global_shm/job_list profile parameter to a much larger value. Unfortunately, the value actually required cannot be found by "trial and error" because this queue contains all the incoming output requests on a spool server, not just the "sequence compliant" requests. A practical lower limit for this value represents the maximum sequence-compliant output requests for the above generated output device. If, for example, 1000 documents that should be output in sequence are issued from an application program to an output device, the queue must be able to hold 1000 entries so that it does not overflow if the SPO process processes the requests at a maximum low-speed.

Err:Internal Job Queue full for synchronous processing of print requests

Hi,
We are getting a lot of errors in system log with the
error :
Internal Job Queue full for synchronous processing of print requests.
User :SAPSYS
MNO:FBU.
When we check the document in syslog it states it can be solved by reducing the print load or increasing performance or if there is a connection problem to host spooler , by improving the transfer of data to host spooler..
But not by increasing the no of spool workprocess..
I think any of the one stated cannot be implemented ..
Pls provide your valuable answers and if any of the above can be implemented from your end..
Regds,
Satyanarayana N

Hi Vamshi,
Thanks for your response but would also like to confirm how we can say that spool queue is full and what may be the Max size of spool queue..
When we say Internal queue is full does it mean spool queue...
And also when I run the TEmse consistency check it is giving some errors..
When I check Spool requests there are some waiting process,but when I check Output requests there are only 1 or 2..
Please provide me your valuable solution regd this..
Regds,
Satyanarayana N.
Regds,
Satyanarayana N.

How to set Internet Explorer to return full URL for the Print Job Name

Hello all,
On printing a web page from IE 6, 7, and 8 using javascript window.print command, the name of the printjob is truncated only to the first 63 characters. Unlike IE 9, it returns the full URL, or at least longer.
Does anyone know the way to set those IE versions to return full or wider URL string?

Sorry for lack of detail in my first post. I don't believe this has anything to do with javascript. The javascript command window.print() simply gives out command to the browser to print the web content.
The situation is that, I open a webpage, for example,
http://www.google.com.my/#sclient=psy&hl=en&source=hp&q=some+long+parameter+value+in+the+query+string&pbx=1&oq=some+long+parameter+value+in+the+query+string
Then I right-click on the page and choose 'Print...' to print the page to a printer. Therefore, Windows spooler system will queue the print job with all the metadata about the doc that is printing. 1 of this metadata is document/printjob name, which are
set to the name of the doc. In case of a web page from IE, this field will be populated with the URL of the page.
I notice that, when I do printing from IE 9 of the above URL, the field document/printjob name is the whole URL string. But while in IE 8 and below, only the first 63 characters of the URL are populated into the field. (I.e:
http://www.google.com.my/#sclient=psy&hl=en&source=hp&q=some+l)
I believe this field is set by the application that sent out the printing command to the spooler. In this case, it's IE.
So, my question is, is there any reg settings for IE 8 and below to force them to put in the whole URL in that field instead of truncates them to only 63 characters?

Reports job in queue waiting for the others

Hi, I have a problem with my Reports, I have created a reports cluster and increased the engine number, but anyway once I send two jobs the second job waits until the first job is completed.
Any idea, If I'll have 20 users the last user has to wait 10 min to get his report printed.

Hi,
Reports Server can have multiple engines. If one engine is busy, the job can be forwarded to the other engine. You can control the number of engines with this element in the Reports Server configurtion file:
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="1" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="60000">
You can increase the maxEngine attribute to 2.
But be careful with the number of engines. A very large number of engines may also bring down the performance by consuming more memory.
Navneet.

How to print full pathname of print job

hello,
i am planning on printing 100s of documents of various types (ms word, pdfs, excel files, etc). i am using snow leapord on a new imac, printing to a brother 5370DW laser printer. is there anyway i can setup this system so that when i send a print job to the printer, it includes the filename or (preferably) the full pathname of the file somewhere in the print job?
thanks.

this is an excellent idea, and there is a cover page option for my printer. i can see it when i bring up a ms word document, and then go to print it. however, i plan to be printing 100s of files by dragging and dropping files into the print queue (rather than printing from an application like ms word which gives me an option to select a cover page when i print something). does anyone know if i can somehow have a cover page printed for each document when i am printing by dragging and dropping lots of documents into a print queue at once?

HP Laser Jet 1020 printing again the last job

Hello there!
I have a printer HPLaser Jet 1020 which, after reboot, of the computer when switching ON the printer, it immediately begins printing the last job that was sent to the printer before the computer had been switched OFF.
I have checked the printing queue before turning OFF the computer and it is empty.
This problem does not happen every reboot, but happens very often and I haven't been able to find the pattern, nor the cause. I've tried it in two different computers and the same problem occurrs. Has anybody else had the same problem?
By the way, I have Windows XP in both computers and the drivers have been downloaded from the HP web-site.
Thanks!

Hi, have you tried to disable bidirectional support'?
Devices/Printer > right click your HP printer icon > Printer Properties > Ports > uncheck 'enable bidirectional support > APPLY
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Print Queue will not remove print jobs

I am running Windows Server 2008 R2 Standard. I have a Printer HP LaserJet P4015n set up as a network printer thru DNS. The printer is working fine all print job will come
out. Each time I send a print job to stays in the queue with the Status "Sent to printer". If I send another print job to the printer it will print out however the job will stay in the queue. I have added the printer to a user’s machine and they were
able to see all the print jobs in the queue. I have stops and started the spool however it does nothing. I have already reinstalled the printer but it has done nothing to help.
After about 5 - 10min of the jobs are sitting the in the queue they delete themselves.
Does anyone know of anything I can do about this?

Hi,
Thanks for the post.
Here is something I need to confirm:
1. Does this issue occur with other network printers?
2. Does this issue occur when printing a text file?
If this issue just occurs with HP LaserJet P4015n, it is caused by the specific printer driver.
Now please perform the following steps to troubleshoot this issue.
Clear spool file
1. Stop the spooler by doing the following:
a. Click Start , Settings , Control Panel , Administrative Tools , then Services .
b. Scroll down the list of services for the Print Spooler.
c. Right click Print Spooler and click Stop .
2. Delete the spool files
a. Open My Computer.
b. Go to C:\WINDOWS\system32\spool\PRINTERS\ .
c. Delete all of the files inside of this folder.
3. Restart the spooler.
a. Click Start , Settings , Control Panel , Administrative Tools , then Services
b. Scroll down the list of services for the Print Spooler.
c. Right click the Print Spooler and click Start.
Change the spooling format
Set the spooling format to RAW, and then try to print directly to the printer instead of spooling the print job. To do this:
          a.       Click "Start", point to "Settings", and then click "Printers".
          b.       Right-click the printer that you are using, and then click "Properties".
          c.       In the Advanced tab, click "Print Processor".
          d.       Set the default "Data type" to "RAW" for both "WinPrint" and "ModPrint".
          f.        Click "OK", click "OK" again, and then close the Printers dialog box.
Does it work?
Hope this helps.
Miles
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to include the URL in the name of the print job when printing from FF

We log all print activity in our company and it would be helpful to be able to identify print jobs from Firefox, however as only a web page's <TITLE> content is used as the print job name, I was wondering if there was a way to either use the URL as the print job name, or even prefix the print job name as "Mozilla Firefox" to identify jobs from this application?

Thank you for your reply but that's the print job content, i.e. page header / footer will have the URL typed into it. I'm after the name of the print job, i.e. as it appears in the print queue. For that I cannot find an option.
I'm wondering whether a plug-in could do this, replace the normal print function with an identical one that uses the URL as the print job name.

Simple Queue-Queue Failing with : kwqjaq: Only job queue slave can run prop

I know this is a simple problem, but I can't get by it.
I have two DB servers and I just want to queue a message on a local queue and have it propagated to a remote queue.
Here are my steps:
I do this on both databases:
grant dba to johnb identified by johnb ;
connect johnb/johnb
create type my_type as object ( a number, b varchar2(2000), c varchar2(2000)) ;
--- multi consumer queue
Begin
/* This queue table should already exist */
dbms_aqadm.create_queue_table( queue_table => 'MY_QUEUE_TAB',
queue_payload_type => 'MY_TYPE',
multiple_consumers => TRUE,
comment => 'Test MultiConsumer OAQ',
compatible => '8.1.0' );
DBMS_AQADM.CREATE_QUEUE (
queue_name => 'MY_QUEUE'
, queue_table => 'MY_QUEUE_TAB' );
dbms_aqadm.start_queue('MY_QUEUE') ;
End;
-- on "Local DB" I do the following:
DECLARE
subscriber sys.aq$_agent;
BEGIN
subscriber := sys.aq$_agent( 'subscriber1' , 'JOHNB.MY_QUEUE@otmdmz2' , null);
DBMS_AQADM.ADD_SUBSCRIBER(queue_name => 'JOHNB.MY_QUEUE', subscriber => subscriber);
END;
-- scheduling propagation
BEGIN
DBMS_AQADM.SCHEDULE_PROPAGATION( queue_name => 'JOHNB.MY_QUEUE' , destination => 'otmdmz2' , destination_queue => 'JOHNB.MY_QUEUE');
END;
BEGIN
DBMS_AQADM.ALTER_PROPAGATION_SCHEDULE( queue_name => 'JOHNB.MY_QUEUE' , destination => 'otmdmz2' , destination_queue => 'JOHNB.MY_QUEUE' , latency => 1 );
END;
-- I queue with this
-- enqueue local
DECLARE
enqueue_options DBMS_AQ.enqueue_options_t;
enqueue_properties DBMS_AQ.message_properties_t;
enqueue_handle RAW(16) ;
enqueue_message JOHNB.MY_TYPE;
BEGIN
enqueue_message := JOHNB.MY_TYPE(1, 'an aq test','sending to remote db' ) ;
dbms_aq.enqueue(queue_name => 'JOHNB.MY_QUEUE',
enqueue_options => enqueue_options,
message_properties => enqueue_properties,
payload => enqueue_message,
msgid => enqueue_handle) ;
commit ;
end;
No messages move to remote DB.
I can see the message in the local queue table.
Both databases have the same init.ora parameters : job_queue_processes=1000, aq_tm_processes=1.
If I attempt to run the job I get the message in the subject line in a trace file:
kwqjaq: Only job queue slave can run propagation job, exiting
Though I am sure simple configuration issue, I cannot find a relevant note.
Thanks,
John

Another case of the documentation being less than precise - it happens.
Without personally having investigated, that's my understanding as well bearing in mind the following observation/explanation in the same article which seems to apply for all except 11gR2:
Although you typically use the JOB_QUEUE_PROCESSES initialization parameter to limit
the number job queue processes for DBMS_JOB and you use the Scheduler attribute
max_job_slave_processes to limit the number of job slave processes for the Scheduler,
the Scheduler is affected by the JOB_QUEUE_PROCESSES parameter.
The maximum number of job slave processes for Scheduler is determined by the lesser
of the values of JOB_QUEUE_PROCESSES and max_job_slave_processes. For example:
If JOB_QUEUE_PROCESSES is set to 10 and max_job_slave_processes is set to 20,
the job coordinator will start no more than 10 job slave processes to be shared
between DBMS_JOB and the Scheduler.
If JOB_QUEUE_PROCESSES is 20 and max_job_slave_processes is 10, the coordinator
will start up to 20 job slave processes. The Scheduler can use only 10 of these,
but DBMS_JOB can use all 20.
If JOB_QUEUE_PROCESSES is 0, DBMS_JOB is disabled, and the maximum number of
job slave processes for Scheduler is controlled by the max_job_slave_processes
Scheduler attribute.

What's up with the screw job on the Airplay mirroring? Macbook Pro (mid 2010) too old to have feature included in Mountain upgrade? Bull!

what's up with the screw job on the Airplay mirroring? Macbook Pro (mid 2010) too old to have feature included in Mountain upgrade? Bull!

Please read:
http://arstechnica.com/apple/2012/07/mountain-lion-airplay-mirroring-v-airparrot -fight/
Mountain Lion's integrated AirPlay mirroring support only works with the following Mac models:
iMac—Mid 2011 or newer
Mac mini—Mid 2011 or newer
MacBook Air—Mid 2011 or newer
MacBook Pro—Early 2011 or newer
If your Mac isn't on that list, your won't ever see an AirPlay option in Mountain Lion's menubar.
What separates these Macs from other Mountain Lion-compatible machines is that these are the only models that have support for Intel's QuickSync technology. What confirmed this requirement for me was the fact that my Retina MacBook Pro switched to integrated Intel HD4000 graphics even when otherwise running on the discrete NVIDIA GT 650M GPU. No matter what you are doing or what resolution you are running, AirPlay Mirroring in Mountain Lion requires an integrated Intel HD3000 or HD4000 graphics processor and its QuickSync technology to work, full stop.

How to limit operator swapping the discrete job seqence in shopfloor

Our planner prioritize and sequence the jobs released to the shopfloor and posted to dispatch board. The current issue is, operator can easily swap the sequence in the dispatch board and we are unable to achieve the priority & sequence set by planner.
Can some one help me out with this issue, so that even operator swap in dispatch board the system should not allow them to perform WIP transaction and mandate them to follow the sequence.
Hoping for your help.
Thanks,
Edited by: user604737 on Nov 10, 2010 9:56 AM

This is a classic example of relying on computers when common sense and business policy/procedures should take over.
There are many ways to achieve this
1) Write a d/b trigger that stops the move transaction record being committed if prior transactions are not done.
2) Personalize the move txn screen to show only appropriate jobs in the LOV for the job # field.
But the sensible thing to do is instruct floor personnel that they should pick up jobs from a queue displayed on the floor board. And if they don't, then slap their wrists or more.
Hope that the first 2 suggestions don't help,
Sandeep Gandhi

Deletion of Queues while upgrading the patches in ECC

Dear Experts,
We wanted to upgrade our ECC system with the new security patches and during that it is throwing an error.
After analysing the error, found a SAP note 1081287 stating to delete BW queues in SMQ1 inorder to make it succesful.
But as deletion of queues before loading data to BI will miss records.
Is there any other way to take backup of the queues which are not yet loaded to BI before deletion so that without missing any records, I can restore my queues after the upgradation of the patches.
Will be very thankful if anyone responds at the earliest.
Best Rgds
Kumar

Hi Kumar,
You would need to run the V3 jobs for all applications so that data will be written to the delta queues from the update/extraction queues. Then do delta loads from BW. Then you can clear the queues and no data would be lost.

Is there any way to configure storage queue message encoding for Web Job's QueueTrigger?

We have a web job that listens to Azure storage queue via QueueTrigger. The queue messages are not encoded when they are added to the queue:
CloudStorageAccount account = CloudStorageAccount.Parse("...");
CloudQueueClient client = account.CreateCloudQueueClient();
CloudQueue queue = client.GetQueueReference("test1");
queue.EncodeMessage = false;
queue.AddMessage(new CloudQueueMessage("hello world"));
And in the web job, we use the below method to listen to the queue.
public static Task ProcessQueueMessageAsync([QueueTrigger("test1")]string message)
And the web job crashes when it gets a message, with the below output. Unfortunately we cannot control the encode setting of the coming messages. So, our question is, is there any way to configure queue message encoding for Web Job's QueueTrigger?
Thank you for any help and/or suggestion.
Found the following functions:
WebJobTest1.Functions.ProcessQueueMessageAsync
Job host started
Unhandled Exception: System.FormatException: Invalid length for a Base-64 char array or string.
at System.Convert.FromBase64_Decode(Char* startInputPtr, Int32 inputLength, Byte* startDestPtr, Int32 destLength)
at System.Convert.FromBase64CharPtr(Char* inputPtr, Int32 inputLength)
at System.Convert.FromBase64String(String s)
at Microsoft.WindowsAzure.Storage.Queue.CloudQueueMessage.get_AsString()
at Microsoft.Azure.WebJobs.Host.Storage.Queue.StorageQueueMessage.get_AsString()
at Microsoft.Azure.WebJobs.Host.Queues.StorageQueueMessageExtensions.TryGetAsString(IStorageQueueMessage message)
at Microsoft.Azure.WebJobs.Host.Queues.QueueCausalityManager.GetOwner(IStorageQueueMessage msg)
at Microsoft.Azure.WebJobs.Host.Queues.Listeners.QueueTriggerExecutor.<ExecuteAsync>d__0.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.Azure.WebJobs.Host.Queues.Listeners.QueueListener.<ProcessMessageAsync>d__11.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at Microsoft.Azure.WebJobs.Host.Timers.BackgroundExceptionDispatcher.<>c__DisplayClass1.<Throw>b__0()
at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
Press any key to continue . . .

Hi,
Thanks for posting here.
I am not too sure if the storage queue messages can be encoded before the webjob listens to it.
I am currently researching to gather more information with regards to your request.
I shall revert back to you with an update at the earliest.
Sincerely appreciate your patience.
Regards,
Shirisha Paderu

WISM-2 RX Multicast Queue Full

We are running a WISM-2 controller with software release 7.2.111.3 (which unfortunately i cannot upgrade right now). There are 290 Access Points connected to the controller with up to
670 current clients.
Almost every weekday for the last two weeks (during peek times mostly) we go the message "RX Multicast Queue Full" several times. When this happens we get a lot of syslog messages from the controller as well:
Local0.Warning -Traceback: 1018e840 10627490 1060b448 10931318 119cc460 11a3256c
Local0.Warning *dtlArpTask: Apr 22 11:45:35.528: %BCAST-4-Q_ADD_FAILED: bcast_net.c:3594 Broadcast/Multicast queue add failed.
Local0.Warning -Traceback: 1091bc28 1018e7ec 10627490 1060b448 10931318 119cc460 11a3256c
Local0.Warning *dtlArpTask: Apr 22 11:45:35.528: %OSAPI-4-MSGQ_SEND_FAILED: osapi_msgq.c:518 Failed to send a message to the message queue object: BCAST-Q . enqueue failed.
At the most we got about 100.000 syslog messages just from this on a single day.
Broadcast and multicast are both disabled on the controller and everything i have found in the forums and in the system message guides seem to indicate that there is no
negative impact on performance from this.
I would really like to find out which traffic exactly causes these messages but i have not found a good way (or any way at all really) to troubleshoot this yet.
Can anybody give me some pointers or should i contact Cisco TAC and open a case for this?
Thanks in advance for any help!

There shouldn't be any negative impact from this...but there is alwasy a chance.
take a look at the switch side config for the WiSM. Make sure you are pruning non-wireless VLANs from the portchannel
"wism slot 3 module 2 allowed vlan 100,101,102,110 etc.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Queue full in the at job

Similar Messages

Maybe you are looking for