Cannot Create Index in EHP 4 System

Hi there,
We got an Enterprise Search 7.0 and some SAP Systems (ERP 6.0 and a NEW IDES ERP EHP4).
In the ERP 6.0 I can create all Indexes I want to have.
Starting SES_Admin, create Index and go.
I the new EHP 4 System (IDES) it's not possible to create an new Index.
The connection between ES 7.0 and the ERP is fine. The System User got the same Rights like the User in the ERP 6.0.
In the SES_Admin it's possible to select the Business Objects I want to index, but after I have select them (all or some special) I see no Object in the Ses_admin. The message below is : indexes created: 4, indexes activated: 0 .
Anyone an idea what I'm doing wrong?
THX for your Help
Edited by: Björn Leistikow on Mar 24, 2010 4:50 PM

I've sold the Problem.
After installing Trex 7.2 the indexes can be created.

Similar Messages

Solution Manager EWA - cannot create session in satellite system

"Hi,
I want to configure EWA self service using Solman 4.0. I succesfully did the following :
a. Maintained SMSY and create the required trusted RFC connections from SM to satellite system. All connection and authorization passed in SM59. I used SAP_ALL/SDCCN_ALL role and assigned objects S_RFC*.
b. Assigned the system to a logical system.
c. Created the a new solution and activate "Solutions Monitoring > Earlywatch Alert"
d. Activated and maintained required RFC in SDCCN in satallite system.
My problem is that the create EWA alert request (Red Flag with a specific session number ) coulnd be pass to the satelitte system even though all the trusted RFC and authorization is set. When i execute the SESSION_REFRESH in the satellite system, the session is not created.
Did I miss out any steps. Can any one share any help ?
FYI, there is no connection to SAPOSS yet, so i did not manage to run RTCCTOOL completed, but i doubt this is required for EWA self service."
I have the same problem as Solution Manager EWA - cannot create session in satellite system
tried all of solutions, but it does not help... Created the CM (high) for SAP, but get 1 response for 1 week from them:(

Dear Sapbcer,
Have you tried the following option :
Execute SMSY and from the Server entry Execute the "Read System Data Remote" option in change mode.
Save the data captured and then try using Refresh Session Task from SDCCN of the satellite system. Do select the RFC for Solution Manager while performing this task.
Hope this helps.
Regards
Amit

Cannot create temp directory: The system cannot find the path specified

Hello
I am getting Cannot create temp directory when deploying to Oracle AS , can any one help ?
---- Deployment started. ---- Apr 23, 2007 8:20:29 AM
Target platform is Oracle Application Server 10g 10.1.3 (WEBQA01).
Wrote WAR file to C:\ide\jdeveloper\jdev\mywork\Upload\Upload\deploy\fileupload.war
Wrote EAR file to C:\ide\jdeveloper\jdev\mywork\Upload\Upload\deploy\fileupload.ear
Operation failed with error:
Cannot create temp directory: The system cannot find the path specified
Deployment failed
Elapsed time for deployment: 8 seconds
#### Deployment incomplete. #### Apr 23, 2007 8:20:37 AM

In Windows, setting the Environmental Variable sometimes DOES NOT WORK.
The -Djava.io.tmpdir=C:\temp setting must be made in the server properties of the oc4j in order for it to work.
Jae

Solaris 9 - INIT: Cannot create /var/adm/utmpx (System Hangs)

Hello,
I am unable to boot into solaris 9 after I did a init 0. I did init 0 because shutdown -y -g0 -i0 did not work.
This is the error message I get
Hardware watchdog enabled
INIT: Cannot create /var/adm/utmpx
INIT: failed write of utmpx entry:" "
INIT: failed write of utmpx entry:" "
INIT: SINGLE USER MODE
Type control-d to proceed with normal startup,
(or give root password for system maintenance):
After it asks for the password it HANGS.
I entered the password, but NOTHING HAPPENS.
I can go into sc console though.
I also rebooted using Solaris 9 cdrom in single user mode. Checked the filesystem using fsck, and no faults were found. I also tried creating a new /var/adm/utmpx file but that did not work too.
Any help would be appreciated,
Thank you,
Jacob.

Hello,
Check for /var filesystem usage,if it is not mouted as seperate filesystem then check for "/" FS usage.
There may be chances you get to have this problem if your FS is full.
If everything normal then follow the below steps, which solved similar kind of issues in the past for me.
Logon to the system and when you get prompt just run fsck on your root filesystem.
Check /etc/vfstab file to ensure that you are running fsck on correct fs name.
After completing fsck just say "reboot". The machine will boot normally.
In b/w is this machine disks are mirrored?? if so then you may need to choose the disks carefully before you run fsck.
thanks.

Problem in create index on file system repository

I want to create an index on file system repository,but have some problem.
1) create a windows filesystem repository
2) I can found the repository entry in KM content
3) go into "index administration" and create index,but I can not found the entry when I pressed "add" button on datasources page

hello Karsten
thanks for your consideration.
After create a Windows file system Repository,I create the index as the fowllowing step.
1) go to the page System Administration=>Knowledge Managment=>Index Administration and click Create button for creating index, then a form appeared.
2) fill in the for specified value, then press Create Index button to create index
3) click on DataSource link, in the Datasource Tab, click the Add button, then I could see all of folders on the screen( such as documents,calendar,etc), but I can not found the Windows File system Entry that just I created.
I can not create a index for the Windows File System
what is the wrong with it?
thanks

Cannot create index

a guy before has similar problems:
begin
ctx_ddl.create_preference ( 'MYPREF', 'basic_lexer');
ctx_ddl.set_attribute ( 'MYPREF', 'index_text','true');
ctx_ddl.set_attribute('MYPREF', 'index_themes','false');
end;
create index index_sdb on sdb(DESCRIPTION) indextype is ctxsys.context parameters ('DATASTORE MYPREF storage DIRECT_DATASTORE');
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: interMedia Text error:
DRG-10708: invalid class id 1 for preference MYPREF
ORA-06512: at "CTXSYS.DRUE", line 126
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 78
ORA-06512: at line 1
whats wrong?
error documentation tells me only determine the correct class id :-(
thaks for help,
thomas

The error message is because you are trying to use a Lexer preference as a Datastore. Replace Datastore -> Lexer.

SRMO - Cannot delete Index Category after System Copy

Hi,
I am trying to delete incorrect Index Categories using t-code SRMO after a system copy (restore db from backup) from our production system to our sandbox system.
When I select the Index Category and click on the "Delete Category" button I get this message:
Error during deletion of language 'EN'. Search
engine result '3147'
When I click on the Help button I get this:
Error during deletion of language 'EN'. Search engine result '3147'
Message no. SRET148
Diagnosis
When the index category is deleted, all languages, and consequently all physical indices on the search server (RFC server) are deleted.
If a physical index could not be deleted, the index category is not deleted or set to inactive either. This is to prevent the index from staying on the search server without R/3 inforamtion.
Procedure
Firstly clean up all languages / indexes for which this information appears.
Use the function to delete an index without R/3 information (if such an index exists) and / or the function to delete the language without an index from the R/3 System.
You can then call the function 'Delete index category' again.
Any ideas on what function they are talking about in the second to last paragraph: "function to delete an index without r/3 information"?
Thank you,
Neil

I have exactly the same problem, only that the index category still can't be deleted even after I deleted the languages first. I still get the error message '3147'. It says that there was an error deleting the languages. As procedure it is suggested (as before) to first delete the languages and then again the index category. But the languages are no longer displayed in the index category.
Does anybody know how I should proceed in order to delete the old invalid index and to create a new one for indexing with the new TREX?

Error while creating BP in EHP system

Hi,
I am getting the following error while trying to create a BP in any role. However, BP record is still getting saved.
Mapping for ID number categories is inconsistent or incomplete
Message no. FKBPIDT044, and followed by a ABAP Dump error when I press back button.
I have checked the function module ABA_FSBP_MAP_DDIC_TO_PROXY_1 in tcode CRMC_BUT_CALL_FU. Flag is not set.
How do I resolve this?
Regards,
Hema

Resloved!

Creating Indexes in Cluster Tables

Hi,
I want to enable the index for the a cluster table..how is it possible..As we see for transparent tables like MSEG ,index tab is enabled but tables like BSEG the option is disabled..Please help me find a solution..
Regards
Maria

You cannot create index on cluster table in SAP.
BSEG is a cluster table, so no index, but hopefully there are "database indexes" on BSEG, which are actual database table : BSIS, BSAS, BSID, BSAS, and so on.
BSEG Access
BSAD Accounting: Secondary index for customers (cleared items)
BSAK Accounting: Secondary index for vendors (cleared items)
BSAS Accounting: Secondary index for G/L accounts (cleared items)
BSID Accounting: Secondary index for customers
BSIK Accounting: Secondary index for vendors
BSIM Secondary Index, Documents for Material
BSIS Accounting: Secondary index for G/L accounts
Create index on these tables.
Look also at
Re: Selecting data from BSEG.
Regards

Error when create index

Hi,
Platform Tru64 BD 8.1.7.
When i create some index for intermedia search, i get some errors:
CREATE TABLE DOCUMENTO (
ID NUMBER (15) NOT NULL,
NOME VARCHAR2 (100) NOT NULL,
DESCRICAO VARCHAR2 (255),
FORMATO VARCHAR2 (128),
AUTOR VARCHAR2 (100),
RESPONSAVEL VARCHAR2 (100) NOT NULL,
DATA_DOCUMENTO DATE,
DATA_CATALOGACAO DATE DEFAULT SYSDATE NOT NULL,
ESTADO VARCHAR2 (2) DEFAULT 'AC' NOT NULL,
DOCUMENTO BLOB,
INTERMEDIA VARCHAR2 (4000),
NAME VARCHAR2 (90),
CRIADO_POR VARCHAR2 (90),
CRIADO_EM DATE,
ALTERADO_POR VARCHAR2 (90),
ALTERADO_EM DATE,
CONSTRAINT ESTADO_CK
CHECK (ESTADO IN ('AC','AN')) ,
CONSTRAINT ID_CONSTRAINTS
UNIQUE (ID),
PRIMARY KEY ( ID ));
CREATE INDEX DOCUMENTO_INDEX ON
DOCUMENTO(DOCUMENTO);
ERROR at line 2:
ORA-02327: cannot create index on expression with datatype LOB
CREATE INDEX INTERMEDIA_INDEX ON
DOCUMENTO(INTERMEDIA);
ERROR at line 2:
ORA-01450: maximum key length (1578) exceeded
Could you give me some help?

Forget last message, i forget to specify index type
Pedro Ribeiro

ERROR ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found

Hi,
SAPSSRC.log
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: START OF LOG: 20071018195059
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Nov 30 2005 20:41:21
C:\usr\sap\BW1\SYS\exe\run/R3load.exe -ctf I C:/temp/51030721/EXP2/DATA/SAPSSRC.STR C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/DDLORA.TPL C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.TSK ORA -l C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.log
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: job completed
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: END OF LOG: 20071018195059
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: START OF LOG: 20071018195133
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Nov 30 2005 20:41:21
C:\usr\sap\BW1\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.cmd -l C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: ABTREE created #20071018195134
(IMP) INFO: import of ABTREE completed (39 rows) #20071018195134
(DB) INFO: ABTREE~0 created #20071018195134
(DB) INFO: AKB_CHKCONF created #20071018195134
(IMP) INFO: import of AKB_CHKCONF completed (0 rows) #20071018195134
(DB) INFO: AKB_CHKCONF~0 created #20071018195134
(DB) INFO: AKB_INDX created #20071018195134
(IMP) INFO: import of AKB_INDX completed (0 rows) #20071018195134
(DB) INFO: AKB_INDX~0 created #20071018195134
(DB) INFO: AKB_USAGE_INFO created #20071018195134
(IMP) INFO: import of AKB_USAGE_INFO completed (0 rows) #20071018195134
(DB) INFO: AKB_USAGE_INFO~0 created #20071018195134
(DB) INFO: AKB_USAGE_INFO2 created #20071018195134
(IMP) INFO: import of AKB_USAGE_INFO2 completed (0 rows) #20071018195134
(DB) INFO: AKB_USAGE_INFO2~0 created #20071018195134
(DB) INFO: APTREE created #20071018195134
(IMP) INFO: import of APTREE completed (388 rows) #20071018195134
(DB) INFO: APTREE~0 created #20071018195134
(DB) INFO: APTREE~001 created #20071018195134
(DB) INFO: APTREET created #20071018195134
(IMP) INFO: import of APTREET completed (272 rows) #20071018195134
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-1452 occurred when executing SQL statement (parse error offset=35)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "APTREET~0" ON "APTREET" ( "SPRAS", "ID", "NAME" ) TABLESPACE PSAPBW1 STORAGE (INITIAL 44981 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 1452)
error message returned by DbSl:
ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
(DB) INFO: disconnected from DB
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: END OF LOG: 20071018195134
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: START OF LOG: 20071018195314
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: version R6.40/V1.4
Compiled Nov 30 2005 20:41:21
C:\usr\sap\BW1\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.cmd -l C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\ORA\NUC\DB/SAPSSRC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) ERROR: DDL statement failed
(DROP INDEX "APTREET~0")
DbSlExecute: rc = 103
(SQL error 1418)
error message returned by DbSl:
ORA-01418: specified index does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-1452 occurred when executing SQL statement (parse error offset=35)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "APTREET~0" ON "APTREET" ( "SPRAS", "ID", "NAME" ) TABLESPACE PSAPBW1 STORAGE (INITIAL 44981 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 1452)
error message returned by DbSl:
ORA-01452: cannot CREATE UNIQUE INDEX; duplicate keys found
(DB) INFO: disconnected from DB
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\BW1\SYS\exe\run/R3load.exe: END OF LOG: 20071018195315
I'm getting this error "duplicate keys found". I'm finished installing the central instance and during the database instance, i got this error. I'm installing BW 3.5 on x64 windows server 2003 platform. I'm using NU kernel 6.40.
Thanks for your suggestions on how to resolve this error.
Reward points guaranteed.

Issue solved by deleting central and database instance and started a new build. it finished without an error.
Thank you.

IDES system copy ..error during IMPORT_ABAP..unable to create indexes

Hi all,
I am doing a IDES system copy. I ran the report SMIGR_CREATE_DLL , the export activities have been completed successfully as well on the source system. Now on the target system, during the import, I am getting the following error in the log file SAPDFACT.log.
(DB) ERROR: DDL statement failed
(CREATE INDEX "/BI0/E0RSTT_C06~P" ON "/BI0/E0RSTT_C06" ( "KEY_0RSTT_C06P" , "KEY_0RSTT_C06T" , "KEY_0RSTT_C06U" , "KEY_0RSTT_C061" , "KEY_0RSTT_C062" , "KEY_0RSTT_C063" , "KEY_0RSTT_C064" , "KEY_0RSTT_C065" , "KEY_0RSTT_C066" , "KEY_0RSTT_C067" , "KEY_0RSTT_C068" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 65536 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 1408)
error message returned by DbSl:
ORA-01408: such column list already indexed
(DB) INFO: disconnected from DB
The owner for this table is SAPSR3. Some oracle forums suggested to drop the index before recreating it. But when i do "drop index SAPSR3."/BI0/E0RSTT_C06~P..it says.."the specified index does not exist". But when I go to recreate this index, it doesn get created successfully. After that when I re-run the import, it again fails. Suprisingly..now if i go to check if this index is present thru a sql querry:
select owner, object_name, object_type from dba_objects where object_name='SAPSR3."/BI0/E0RSTT_C06~P"', it tells "no rows selected". This is happening everytime, I create an index, where it gets created successfully, and the import again fails with the same error in SAPDFACT.log.
I found an SAP note 885441 named..common errors during migration..although mine isnt a migration..my both source and destination are Red hat 64 bit platform.
The note 1st asks to download the latest R3load..which I did and extracted in the kernel directory of the source..then it also asked to edit the .TSK file..in my case..SAPDFACT.TSK..where the lines:
I /BIC/E<Cubename>~<index> C err
to I /BIC/E<Cubename>~<index> C ign..
I did that..this time..the import again fails..but in the SAPDFACT.log..it complains about some other index..n the same gets generated in the .TSK file as well..the earlier index error is not again generated.
I am not sure..what is going wrong..my export went through successfully.i have done the prep steps for export as well..before that i ran the SMIGR_CREATE_DLL report as well..
Any inputs are highly appreciated..
Thanks,
Akshay

Hi,
Check SAP Note 1166589 - Table converter: DB error when creating secondary indexes
Thanks
Sunny

Cannot create InfoArea (Source System ID Problem)

Hi,
I cannot create an InfoArea in our BW TestSystem due to the source system ID. I get the following message...
"Choose a Change Request with Target System CCX"
The Performance Asst. gives me the following protocol.....
Diagnosis
The selected change request CC7K900485 has target system .
However, the objects you edit can only be recorded in change requests with the target system CCX.
The correct target system is determined from the package and transport layer to which the object concerned belongs.
System Response
The selected change request CC7K900485 is not used to record the objects.
Procedure
Either choose a different change request or change the target system of the change request CC7K900485.
From the prompt window for change requests, you can display all requests you can use by choosing Own requests.
Alternatively, you can create a new request by choosing Create request.
For more information, see the SAP Library under BC - Basis Components -> Change and Transport System .
I have been in the SourceSystem ID Maintenance (CtrlShiftF11) and noticed that all system ID are two lettered. Could you pls explain how I proceed with this problem.
Thanks,
SD

Hi Srinivas.
Thanks for ur advice. I am on the Requests (Free Selection) screen after going through SE03 and can see the Request CC7K900485. Under that there are a lot of users with comments like "Development/Correction" or "Repair". Could u help me with how I can change the target system to CCX.
SD

Streams cannot create an index

HI All,
     I am currently implementing an Oracle Streams setup to stream a schema from one database to another database. While I have been able to overcome most problems so far, I currently have an issue where the streams apply process cannot create an index in the destination.
     I have effectively disabled VPD on the destination, and granted every privilege I can think of directly to the streams administrator, but still the transaction returns "ORA-00942: table or view does not exist". No other errors are listed - none about prilileges, open cursors or other possible problems
     I have searched Metalink, and found two notes (264477.1 and 276805.1), however neither really describe the problem, nor do their solutions help.
     Environment details are Oracle 11.1.0.7 on Red Hat Enterprise Linux Server release 5.3 (Tikanga)
     I have created a script which summarises attempted solutions, whose output is included below - appologies for the length.
Thanks in advance for any suggestions
Gavin
@ SQL>
@ SQL> connect / as sysdba
Connected.
SYS@TGFLXRD SQL> -- grant sysdba
SYS@TGFLXRD SQL> grant sysdba to strmadmin;
Grant succeeded.
Elapsed: 00:00:00.01
SYS@TGFLXRD SQL>
SYS@TGFLXRD SQL> -- For VPD
SYS@TGFLXRD SQL> grant exempt access policy to strmadmin;
Grant succeeded.
Elapsed: 00:00:00.01
SYS@TGFLXRD SQL>
SYS@TGFLXRD SQL> -- Object priv
SYS@TGFLXRD SQL> -- from Metalink ORA-942 ORA-1000 While Adding a New Table to 10g Streams Replication [ID 264477.1]
SYS@TGFLXRD SQL> grant dba to strmadmin;
Grant succeeded.
Elapsed: 00:00:00.00
SYS@TGFLXRD SQL>
SYS@TGFLXRD SQL> grant create any index to strmadmin;
Grant succeeded.
Elapsed: 00:00:00.00
SYS@TGFLXRD SQL>
SYS@TGFLXRD SQL> column grantee format a15
SYS@TGFLXRD SQL> column table_name format a25
SYS@TGFLXRD SQL> column owner format a15
SYS@TGFLXRD SQL> column grantor format a15
SYS@TGFLXRD SQL> column privilege format a20
SYS@TGFLXRD SQL> select *
2 from dba_tab_privs
3 where table_name = 'SHIPMENT_STOP_DEBRIEF'
4 order by grantee, privilege;
GRANTEE OWNER TABLE_NAME GRANTOR PRIVILEGE GRANTABLE HIERARCHY
APP_USER GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER DELETE NO NO
APP_USER GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER INSERT NO NO
APP_USER GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER SELECT NO NO
APP_USER GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER UPDATE NO NO
REPORTOWNER GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER INSERT YES NO
REPORTOWNER GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER REFERENCES NO NO
REPORTOWNER GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER SELECT YES NO
REPORTOWNER GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER UPDATE YES NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER ALTER NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER DEBUG NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER DELETE NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER FLASHBACK NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER INDEX NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER INSERT NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER ON COMMIT REFRESH NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER QUERY REWRITE NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER REFERENCES NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER SELECT NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER UPDATE NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER ALTER NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER DEBUG NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER DELETE NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER FLASHBACK NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER INSERT NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER ON COMMIT REFRESH NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER QUERY REWRITE NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER SELECT NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER UPDATE NO NO
28 rows selected.
Elapsed: 00:00:00.02
SYS@TGFLXRD SQL>
SYS@TGFLXRD SQL>
SYS@TGFLXRD SQL> connect glogowner/xxxxxx
Connected.
GLOGOWNER@TGFLXRD SQL> grant all on SHIPMENT_STOP_DEBRIEF to strmadmin;
Grant succeeded.
Elapsed: 00:00:00.01
GLOGOWNER@TGFLXRD SQL>
GLOGOWNER@TGFLXRD SQL>
GLOGOWNER@TGFLXRD SQL> connect strmadmin/xxxxxx
Connected.
STRMADMIN@TGFLXRD SQL> -- ensure object can be seen
STRMADMIN@TGFLXRD SQL> create or replace synonym SHIPMENT_STOP_DEBRIEF for glogowner.SHIPMENT_STOP_DEBRIEF;
Synonym created.
Elapsed: 00:00:00.01
STRMADMIN@TGFLXRD SQL>
STRMADMIN@TGFLXRD SQL> -- from Metalink ORA-942 & ORA-1000 from an Apply Process After Adding a New Table to a Streams Environment [ID 276805.1]
STRMADMIN@TGFLXRD SQL> column privilege format a40
STRMADMIN@TGFLXRD SQL> COLUMN APPLY_NAME HEADING 'Apply Process Name' FORMAT A20
STRMADMIN@TGFLXRD SQL> COLUMN APPLY_CAPTURED HEADING 'Type of Events Applied' FORMAT A15
STRMADMIN@TGFLXRD SQL> COLUMN APPLY_USER HEADING 'Apply User' FORMAT A30
STRMADMIN@TGFLXRD SQL> SELECT APPLY_NAME,
2 DECODE(APPLY_CAPTURED,
3 'YES', 'Captured',
4 'NO', 'User-Enqueued') APPLY_CAPTURED,
5 APPLY_USER
6 FROM DBA_APPLY;
Apply Process Name Type of Events Apply User
TGF_APP Captured STRMADMIN
OTM_APP Captured STRMADMIN
Elapsed: 00:00:00.00
STRMADMIN@TGFLXRD SQL> --select * from session_privs order by 1;
STRMADMIN@TGFLXRD SQL>
STRMADMIN@TGFLXRD SQL> -- print_transaction from Oracle doco at
STRMADMIN@TGFLXRD SQL> -- http://download.oracle.com/docs/cd/B28359_01/server.111/b28321/strms_apmon.htm#CHDFBEFC
STRMADMIN@TGFLXRD SQL> set serveroutput on
STRMADMIN@TGFLXRD SQL> exec print_transaction('10.3.2694');
---- Local Transaction ID: 10.3.2694
---- Source Database: TGFLXD
----Error in Message: 1
----Error Number: 942
----Message Text: ORA-00942: table or view does not exist
--message: 1
type name: SYS.LCR$_DDL_RECORD
source database: TGFLXD
owner: GLOGOWNER
object: IX_SSD_ITEM_GID
is tag null: Y
ddl: CREATE INDEX GLOGOWNER.IX_SSD_ITEM_GID ON SHIPMENT_STOP_DEBRIEF(ITEM_GID) TABLESPACE INDX
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.01
STRMADMIN@TGFLXRD SQL>
STRMADMIN@TGFLXRD SQL> CREATE INDEX GLOGOWNER.IX_SSD_ITEM_GID ON SHIPMENT_STOP_DEBRIEF(ITEM_GID) TABLESPACE INDX;
Index created.
Elapsed: 00:00:00.02
STRMADMIN@TGFLXRD SQL> drop index GLOGOWNER.IX_SSD_ITEM_GID;
Index dropped.
Elapsed: 00:00:00.05
STRMADMIN@TGFLXRD SQL>
STRMADMIN@TGFLXRD SQL> -- let's try now...
STRMADMIN@TGFLXRD SQL> desc SHIPMENT_STOP_DEBRIEF
Name Null? Type
SHIPMENT_GID NOT NULL VARCHAR2(101)
STOP_NUM NOT NULL NUMBER(3)
ACTIVITY NOT NULL VARCHAR2(1)
SEQUENCE_NO NOT NULL VARCHAR2(10)
S_SHIP_UNIT_GID VARCHAR2(101)
S_SHIP_UNIT_LINE_NO NUMBER(10)
ITEM_PACKAGE_COUNT NUMBER(10)
PACKAGING_UNIT_GID VARCHAR2(101)
PACKAGING_UNIT_COUNT NUMBER(10)
TRANSPORT_HANDLING_UNIT_GID VARCHAR2(101)
TRANSPORT_HANDLING_UNIT_COUNT NUMBER(10)
ITEM_GID VARCHAR2(101)
NON_CONF_REASON_CODE_GID VARCHAR2(101)
SHIP_UNIT_GID VARCHAR2(101)
S_EQUIPMENT_GID VARCHAR2(101)
MATCH_TYPE VARCHAR2(20)
ORDER_RELEASE_LINE_GID VARCHAR2(101)
DOMAIN_NAME NOT NULL VARCHAR2(50)
INSERT_USER NOT NULL VARCHAR2(128)
INSERT_DATE NOT NULL DATE
UPDATE_USER VARCHAR2(128)
UPDATE_DATE DATE
STRMADMIN@TGFLXRD SQL> select count(*) from SHIPMENT_STOP_DEBRIEF;
COUNT(*)
0
Elapsed: 00:00:00.00
STRMADMIN@TGFLXRD SQL> select count(*) from glogowner.SHIPMENT_STOP_DEBRIEF;
COUNT(*)
0
Elapsed: 00:00:00.01
STRMADMIN@TGFLXRD SQL>
STRMADMIN@TGFLXRD SQL> set serveroutput on
STRMADMIN@TGFLXRD SQL> begin
2 dbms_apply_adm.execute_error(
3 local_transaction_id => '10.3.2694',
4 execute_as_user => false,
5 user_procedure => null);
6 end;
7 /
begin
ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at "SYS.DBMS_APPLY_ERROR", line 151
ORA-06512: at "SYS.DBMS_APPLY_ERROR", line 265
ORA-06512: at "SYS.DBMS_APPLY_ADM", line 467
ORA-06512: at line 2
Elapsed: 00:00:00.03
STRMADMIN@TGFLXRD SQL>
STRMADMIN@TGFLXRD SQL>
STRMADMIN@TGFLXRD SQL> connect / as sysdba
Connected.
SYS@TGFLXRD SQL> revoke sysdba from strmadmin;
Revoke succeeded.
Elapsed: 00:00:00.07
SYS@TGFLXRD SQL>
SYS@TGFLXRD SQL>
SYS@TGFLXRD SQL> spool off
-------------------------------------------------------------------------------------------------------------

HI All,
     I am currently implementing an Oracle Streams setup to stream a schema from one database to another database. While I have been able to overcome most problems so far, I currently have an issue where the streams apply process cannot create an index in the destination.
     I have effectively disabled VPD on the destination, and granted every privilege I can think of directly to the streams administrator, but still the transaction returns "ORA-00942: table or view does not exist". No other errors are listed - none about prilileges, open cursors or other possible problems
     I have searched Metalink, and found two notes (264477.1 and 276805.1), however neither really describe the problem, nor do their solutions help.
     Environment details are Oracle 11.1.0.7 on Red Hat Enterprise Linux Server release 5.3 (Tikanga)
     I have created a script which summarises attempted solutions, whose output is included below - appologies for the length.
Thanks in advance for any suggestions
Gavin
@ SQL>
@ SQL> connect / as sysdba
Connected.
SYS@TGFLXRD SQL> -- grant sysdba
SYS@TGFLXRD SQL> grant sysdba to strmadmin;
Grant succeeded.
Elapsed: 00:00:00.01
SYS@TGFLXRD SQL>
SYS@TGFLXRD SQL> -- For VPD
SYS@TGFLXRD SQL> grant exempt access policy to strmadmin;
Grant succeeded.
Elapsed: 00:00:00.01
SYS@TGFLXRD SQL>
SYS@TGFLXRD SQL> -- Object priv
SYS@TGFLXRD SQL> -- from Metalink ORA-942 ORA-1000 While Adding a New Table to 10g Streams Replication [ID 264477.1]
SYS@TGFLXRD SQL> grant dba to strmadmin;
Grant succeeded.
Elapsed: 00:00:00.00
SYS@TGFLXRD SQL>
SYS@TGFLXRD SQL> grant create any index to strmadmin;
Grant succeeded.
Elapsed: 00:00:00.00
SYS@TGFLXRD SQL>
SYS@TGFLXRD SQL> column grantee format a15
SYS@TGFLXRD SQL> column table_name format a25
SYS@TGFLXRD SQL> column owner format a15
SYS@TGFLXRD SQL> column grantor format a15
SYS@TGFLXRD SQL> column privilege format a20
SYS@TGFLXRD SQL> select *
2 from dba_tab_privs
3 where table_name = 'SHIPMENT_STOP_DEBRIEF'
4 order by grantee, privilege;
GRANTEE OWNER TABLE_NAME GRANTOR PRIVILEGE GRANTABLE HIERARCHY
APP_USER GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER DELETE NO NO
APP_USER GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER INSERT NO NO
APP_USER GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER SELECT NO NO
APP_USER GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER UPDATE NO NO
REPORTOWNER GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER INSERT YES NO
REPORTOWNER GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER REFERENCES NO NO
REPORTOWNER GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER SELECT YES NO
REPORTOWNER GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER UPDATE YES NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER ALTER NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER DEBUG NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER DELETE NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER FLASHBACK NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER INDEX NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER INSERT NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER ON COMMIT REFRESH NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER QUERY REWRITE NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER REFERENCES NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER SELECT NO NO
STRMADMIN GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER UPDATE NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER ALTER NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER DEBUG NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER DELETE NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER FLASHBACK NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER INSERT NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER ON COMMIT REFRESH NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER QUERY REWRITE NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER SELECT NO NO
STRMADMIN_ROLE GLOGOWNER SHIPMENT_STOP_DEBRIEF GLOGOWNER UPDATE NO NO
28 rows selected.
Elapsed: 00:00:00.02
SYS@TGFLXRD SQL>
SYS@TGFLXRD SQL>
SYS@TGFLXRD SQL> connect glogowner/xxxxxx
Connected.
GLOGOWNER@TGFLXRD SQL> grant all on SHIPMENT_STOP_DEBRIEF to strmadmin;
Grant succeeded.
Elapsed: 00:00:00.01
GLOGOWNER@TGFLXRD SQL>
GLOGOWNER@TGFLXRD SQL>
GLOGOWNER@TGFLXRD SQL> connect strmadmin/xxxxxx
Connected.
STRMADMIN@TGFLXRD SQL> -- ensure object can be seen
STRMADMIN@TGFLXRD SQL> create or replace synonym SHIPMENT_STOP_DEBRIEF for glogowner.SHIPMENT_STOP_DEBRIEF;
Synonym created.
Elapsed: 00:00:00.01
STRMADMIN@TGFLXRD SQL>
STRMADMIN@TGFLXRD SQL> -- from Metalink ORA-942 & ORA-1000 from an Apply Process After Adding a New Table to a Streams Environment [ID 276805.1]
STRMADMIN@TGFLXRD SQL> column privilege format a40
STRMADMIN@TGFLXRD SQL> COLUMN APPLY_NAME HEADING 'Apply Process Name' FORMAT A20
STRMADMIN@TGFLXRD SQL> COLUMN APPLY_CAPTURED HEADING 'Type of Events Applied' FORMAT A15
STRMADMIN@TGFLXRD SQL> COLUMN APPLY_USER HEADING 'Apply User' FORMAT A30
STRMADMIN@TGFLXRD SQL> SELECT APPLY_NAME,
2 DECODE(APPLY_CAPTURED,
3 'YES', 'Captured',
4 'NO', 'User-Enqueued') APPLY_CAPTURED,
5 APPLY_USER
6 FROM DBA_APPLY;
Apply Process Name Type of Events Apply User
TGF_APP Captured STRMADMIN
OTM_APP Captured STRMADMIN
Elapsed: 00:00:00.00
STRMADMIN@TGFLXRD SQL> --select * from session_privs order by 1;
STRMADMIN@TGFLXRD SQL>
STRMADMIN@TGFLXRD SQL> -- print_transaction from Oracle doco at
STRMADMIN@TGFLXRD SQL> -- http://download.oracle.com/docs/cd/B28359_01/server.111/b28321/strms_apmon.htm#CHDFBEFC
STRMADMIN@TGFLXRD SQL> set serveroutput on
STRMADMIN@TGFLXRD SQL> exec print_transaction('10.3.2694');
---- Local Transaction ID: 10.3.2694
---- Source Database: TGFLXD
----Error in Message: 1
----Error Number: 942
----Message Text: ORA-00942: table or view does not exist
--message: 1
type name: SYS.LCR$_DDL_RECORD
source database: TGFLXD
owner: GLOGOWNER
object: IX_SSD_ITEM_GID
is tag null: Y
ddl: CREATE INDEX GLOGOWNER.IX_SSD_ITEM_GID ON SHIPMENT_STOP_DEBRIEF(ITEM_GID) TABLESPACE INDX
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.01
STRMADMIN@TGFLXRD SQL>
STRMADMIN@TGFLXRD SQL> CREATE INDEX GLOGOWNER.IX_SSD_ITEM_GID ON SHIPMENT_STOP_DEBRIEF(ITEM_GID) TABLESPACE INDX;
Index created.
Elapsed: 00:00:00.02
STRMADMIN@TGFLXRD SQL> drop index GLOGOWNER.IX_SSD_ITEM_GID;
Index dropped.
Elapsed: 00:00:00.05
STRMADMIN@TGFLXRD SQL>
STRMADMIN@TGFLXRD SQL> -- let's try now...
STRMADMIN@TGFLXRD SQL> desc SHIPMENT_STOP_DEBRIEF
Name Null? Type
SHIPMENT_GID NOT NULL VARCHAR2(101)
STOP_NUM NOT NULL NUMBER(3)
ACTIVITY NOT NULL VARCHAR2(1)
SEQUENCE_NO NOT NULL VARCHAR2(10)
S_SHIP_UNIT_GID VARCHAR2(101)
S_SHIP_UNIT_LINE_NO NUMBER(10)
ITEM_PACKAGE_COUNT NUMBER(10)
PACKAGING_UNIT_GID VARCHAR2(101)
PACKAGING_UNIT_COUNT NUMBER(10)
TRANSPORT_HANDLING_UNIT_GID VARCHAR2(101)
TRANSPORT_HANDLING_UNIT_COUNT NUMBER(10)
ITEM_GID VARCHAR2(101)
NON_CONF_REASON_CODE_GID VARCHAR2(101)
SHIP_UNIT_GID VARCHAR2(101)
S_EQUIPMENT_GID VARCHAR2(101)
MATCH_TYPE VARCHAR2(20)
ORDER_RELEASE_LINE_GID VARCHAR2(101)
DOMAIN_NAME NOT NULL VARCHAR2(50)
INSERT_USER NOT NULL VARCHAR2(128)
INSERT_DATE NOT NULL DATE
UPDATE_USER VARCHAR2(128)
UPDATE_DATE DATE
STRMADMIN@TGFLXRD SQL> select count(*) from SHIPMENT_STOP_DEBRIEF;
COUNT(*)
0
Elapsed: 00:00:00.00
STRMADMIN@TGFLXRD SQL> select count(*) from glogowner.SHIPMENT_STOP_DEBRIEF;
COUNT(*)
0
Elapsed: 00:00:00.01
STRMADMIN@TGFLXRD SQL>
STRMADMIN@TGFLXRD SQL> set serveroutput on
STRMADMIN@TGFLXRD SQL> begin
2 dbms_apply_adm.execute_error(
3 local_transaction_id => '10.3.2694',
4 execute_as_user => false,
5 user_procedure => null);
6 end;
7 /
begin
ERROR at line 1:
ORA-00942: table or view does not exist
ORA-06512: at "SYS.DBMS_APPLY_ERROR", line 151
ORA-06512: at "SYS.DBMS_APPLY_ERROR", line 265
ORA-06512: at "SYS.DBMS_APPLY_ADM", line 467
ORA-06512: at line 2
Elapsed: 00:00:00.03
STRMADMIN@TGFLXRD SQL>
STRMADMIN@TGFLXRD SQL>
STRMADMIN@TGFLXRD SQL> connect / as sysdba
Connected.
SYS@TGFLXRD SQL> revoke sysdba from strmadmin;
Revoke succeeded.
Elapsed: 00:00:00.07
SYS@TGFLXRD SQL>
SYS@TGFLXRD SQL>
SYS@TGFLXRD SQL> spool off
-------------------------------------------------------------------------------------------------------------

SelectTransport: creating directory failed: Win32Exception: root of directory to create not found: The system cannot find the path specified. [0x00000003]

USMT is failing with error 71 for all users in a specific office when backing up to a specific share:
COMPUTERNAME\Guest, administrator: No, interactive: Yes, logged on: No, has profile: No
DOMAIN\USERNAME, administrator: Yes, interactive: Yes, logged on: Yes, has profile: Yes
COMPUTERNAME\Administrator, administrator: Yes, interactive: Yes, logged on: No, has profile: Yes
2014-10-31 12:52:37, Status [0x000000] Activity: 'MIGACTIVITY_TRANSPORT_SELECTION'
2014-10-31 12:52:37, Info [0x000000] Processing the settings store
2014-10-31 12:52:37, Error [0x000000] SelectTransport: creating directory \\san.f.q.d.n\share$\username\BACKUP\USERNAME\USMT failed: Win32Exception: root of directory to create not found: The system cannot find the path specified. [0x00000003] class UnBCL::DirectoryInfo *__cdecl UnBCL::Directory::CreateDir(const class UnBCL::String *)[gle=0x00000005]
2014-10-31 12:52:37, Info [0x000000] Failed.[gle=0x00000091]
2014-10-31 12:52:37, Info [0x000000] A Windows Win32 API error occurred
Windows error 3 description: The system cannot find the path specified.[gle=0x00000091]
2014-10-31 12:52:37, Info [0x000000] Windows Error 3 description: The system cannot find the path specified.
2014-10-31 12:52:37, Info [0x000000] USMT Completed at 2014/10/31:12:52:37.861[gle=0x00000091]
2014-10-31 12:52:37, Info [0x000000] Entering MigShutdown method
2014-10-31 12:52:37, Info [0x080000] COutOfProcPluginFactory::FreeSurrogateHost: Shutdown in progress.
2014-10-31 12:52:37, Info [0x0803e5] Not unmapping HKLM\ELAM; it is not mapped
2014-10-31 12:52:37, Info [0x0803e6] Removing mapping for HKLM
2014-10-31 12:52:37, Info [0x0803e7] Successfully unmapped HKLM
2014-10-31 12:52:37, Info [0x0803e6] Removing mapping for HKU
2014-10-31 12:52:37, Info [0x0803e7] Successfully unmapped HKU
2014-10-31 12:52:37, Info [0x080487] Destroying OS analysis service
2014-10-31 12:52:37, Info [0x080488] Destroyed OS analysis service
2014-10-31 12:52:37, Info [0x000000] Leaving MigShutdown method
2014-10-31 12:52:37, Info [0x000000] ----------------------------------- USMT ERROR SUMMARY -----------------------------------
2014-10-31 12:52:37, Info [0x000000] * USMT error code 71:
2014-10-31 12:52:37, Info [0x000000] +-----------------------------------------------------------------------------------------
2014-10-31 12:52:37, Info [0x000000] | A Windows Win32 API error occurred
2014-10-31 12:52:37, Info [0x000000] | Windows error 3 description: The system cannot find the path specified.
2014-10-31 12:52:37, Info [0x000000] +-----------------------------------------------------------------------------------------
As the user in question, when I browse \\san.f.q.d.n\share$\username, the BACKUP directory exists, but there are no sub directories.
I manually created the sub directories, USERNAME\USMT - so the full path now exists: \\san.f.q.d.n\share$\username\BACKUP\USERNAME\USMT
I re-ran USMT but the process returned the same error.
If I specify other shares not on san.f.q.d.n but on san1.f.q.d.n or server.f.q.d.n or even workstation.f.q.d.n, it works fine.
Can someone provide guidance on how to troubleshoot this further?

In Windows, setting the Environmental Variable sometimes DOES NOT WORK.
The -Djava.io.tmpdir=C:\temp setting must be made in the server properties of the oc4j in order for it to work.
Jae

Cannot Create Index in EHP 4 System

Similar Messages

Maybe you are looking for