Cannot destroy cluster
Hello,
We recently ran into some trouble with our cluster running Windows Server 2008 R2 after security patching was completed. The cluster did not return to normal and now when attempting to start the cluster service it states that it cannot and comes back with
an error code of 2. The logs are reporting 7024 and 1090, and Cluster Log /g states 'open key parameters'.
I was going to to destroy the cluster and start all over again, however, when I attempt to destroy the cluster, I receive an error message - System error 1753 has occurred (0x000006d9). There are no more endpoints available from the endpoint mapper.
I am going to make the assumption that Windows cannot destroy the cluster as the service is not running?
I tried to remove the feature from the Server, however, Windows comes back and states that the Server belongs to a cluster and therefore it cannot be removed. If I disable the cluster service, I can remove the feature, however, I am not sure if this
is the best method of what may happen if I do it this way?
So with this said, does anyone have any advice on how to destroy the cluster when it is in a state such as this?
Thanks in advance,
CU
The the steps outlined in the following blog post, even if the errors aren't an exact match, this should hopefully resolve your issue:
http://blogs.technet.com/b/pfe-ireland/archive/2008/07/04/cluster-node-forcecleanup-error-2147352567.aspx
Visit my blog about multi-site clustering
Similar Messages
-
DEPLOY_ONLINE_DEPL phase -- Cannot restart cluster HS1 in SAFE mode.
To ALL:
During the down time step of implementing EHP4 I receive the following error:
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[I:\downloads\EHPI\java\log\DEPLOY_ONLINE_DEPL_DDB_17.LOG]/>
<!PATTERN[DEPLOY_ONLINE_DEPL_DDB_17.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%s]: %-100l [%t]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jan 14, 2010 2:36:51 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:754) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been started.
Jan 14, 2010 2:36:51 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:755) [Thread[main,5,main]]: Phase type is com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.
Jan 14, 2010 2:36:51 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter action=deploySlot
Jan 14, 2010 2:36:51 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter connect=standard
Jan 14, 2010 2:36:51 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter errorStrategy=skipDepending
Jan 14, 2010 2:36:51 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:409) [Thread[main,5,main]]: Parameter rule=all
Jan 14, 2010 2:36:52 PM [Info]: com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.checkParameters(PhaseTypeDeploymentManager.java:558) [Thread[main,5,main]]: Checking phase parameters action, connect.
Jan 14, 2010 2:36:52 PM [Info]: com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.checkParameters(PhaseTypeDeploymentManager.java:570) [Thread[main,5,main]]: Phase parameters have been checked. All required 1 phase parameters have been set.
Jan 14, 2010 2:36:52 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.connect(SAPJupJSPMRapiAdapter.java:127) [Thread[main,5,main]]: Trying to connect JSPM.
Jan 14, 2010 2:36:52 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.connect(SAPJupJSPMRapiAdapter.java:136) [Thread[main,5,main]]: JSPM is not connected, trying to start it.
Jan 14, 2010 2:36:53 PM [Info]: com.sap.sdt.util.proc.Process.start(Process.java:164) [Thread[main,5,main]]: I:\downloads\EHPI\jvm\jre\bin\java -ea -Xmx1024m -cp g:\usr\sap\HS1\DVEBMGS02\j2ee\JSPM\bootstrap\lib\sdt_jspm_bootstrap.jar Jspm -boot=win -port=6250 -properties=jspm-srv_config.txt -config=/jspm/sdmRepositorySync=true -startJSPM
Jan 14, 2010 2:36:56 PM [Info]: java.lang.Thread.getStackTrace(Thread.java:1501) [Thread[ProcessReader,5,main]]: >> Current log directory is G:\usr\sap\HS1\DVEBMGS02\j2ee\JSPM\log\log_2010_01_14_14_36_55.
Jan 14, 2010 2:36:58 PM [Info]: com.sap.sdt.sltool.rapi.connector.AbstractToolConnector.finished(AbstractToolConnector.java:373) [Thread[Process(I:\downloads\EHPI\jvm\jre\bin\java -ea -Xmx1024m -cp g:\usr\sap\HS1\DVEBMGS02\j2ee\JSPM\bootstrap\lib\sdt_jspm_bootstrap.jar Jspm),5,main]]: JSPM terminated with exit code 0.
Jan 14, 2010 2:37:01 PM [Info]: com.sap.sdt.sltool.rapi.connector.AbstractToolConnector.connect(AbstractToolConnector.java:729) [Thread[main,5,main]]: Connected to host sapes2 on port 6250.
Jan 14, 2010 2:37:01 PM [Warning]: com.sap.sdt.sltool.rapi.connector.AbstractToolConnector.discardMsg(AbstractToolConnector.java:775) [Thread[JSPM,5,main]]: Discarding message $com.sap.sdt.sltool.rapi.connector.MsgData@43422d0b
Jan 14, 2010 2:37:19 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.connect(SAPJupJSPMRapiAdapter.java:139) [Thread[main,5,main]]: JSPM was started successfully.
Jan 14, 2010 2:37:19 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.login(SAPJupJSPMRapiAdapter.java:184) [Thread[main,5,main]]: Trying to log in with user SAP*.
Jan 14, 2010 2:37:19 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.login(SAPJupJSPMRapiAdapter.java:190) [Thread[main,5,main]]: JSPM detect non deployable components login request property is set to "false".
Jan 14, 2010 2:38:52 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.login(SAPJupJSPMRapiAdapter.java:199) [Thread[main,5,main]]: JSPM successfully logged in with user SAP*.
Jan 14, 2010 2:38:52 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.connect(SAPJupJSPMRapiAdapter.java:143) [Thread[main,5,main]]: JSPM was connected successfully.
Jan 14, 2010 2:38:52 PM [Info]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.deploy(SAPJupJSPMRapiAdapter.java:477) [Thread[main,5,main]]: Starting deployment.
Jan 14, 2010 2:44:58 PM [Error]: com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Jan 14, 2010 2:44:58 PM [Error]: com.sap.sdt.jspm.unattended.RequestController.addContextInfo(RequestController.java:178) [Thread[main,5,main]]: Deployment of queue sapjup-queue completed with error Cannot restart cluster in SAFE mode with action NONE.
Cannot restart cluster HS1 in SAFE mode.
Shuting down the HS1 cluster failed.
Could not shut down the whole cluster.
com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl: There was an IOException while sending a command to the cluster instance
com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl: There was an IOException while sending a command to the cluster instance
JSPM version is 7.01.5.1.3. Current JSPM log directory is G:\usr\sap\HS1\DVEBMGS02\j2ee\JSPM\log\log_2010_01_14_14_36_55.
Jan 14, 2010 2:44:58 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createAndLogRapiException(SAPJupJSPMRapiAdapter.java:695) [Thread[main,5,main]]: The deployment of the queue failed.
Jan 14, 2010 2:44:58 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.deploy.SAPJupJSPMDeployer.deployList(SAPJupJSPMDeployer.java:68) [Thread[main,5,main]]: Could not execute deployment of stack file F:\SAP_DOWNLOADS\EHP4\sapnotes\SMSDXML_HS1_20091231185454.628.xml.
Jan 14, 2010 2:44:58 PM [Error]: com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.execute(PhaseTypeDeploymentManager.java:519) [Thread[main,5,main]]: Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action.
Jan 14, 2010 2:44:58 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been completed.
Jan 14, 2010 2:44:58 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2010/01/14 14:36:51.
Jan 14, 2010 2:44:58 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2010/01/14 14:44:58.
Jan 14, 2010 2:44:58 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:08:07.020.
Jan 14, 2010 2:44:58 PM [Info]: com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
The main issue seems to be restarting the cluster in SAFE mode.
Any help would be greatly appreciated !!
Thanks,
ScottHi,
> Jan 14, 2010 2:44:58 PM [Error]: >com.sap.sdt.jspm.unattended.RequestController.addContextInfo(RequestController.java:178) [Thread[main,5,main]]: Deployment >of queue sapjup-queue completed with error Cannot restart cluster in SAFE mode with action NONE.
> Cannot restart cluster HS1 in SAFE mode.
> Shuting down the HS1 cluster failed.
> Could not shut down the whole cluster.
> com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl: There was an IOException while sending a command to the >cluster instance
> com.sap.bc.proj.jstartup.impl.JStartupClusterControlExceptionImpl: There was an IOException while sending a command to the >cluster instance
>
Have you tried to stop manually and restart it again ?
Also, read the troubleshooting guide in <upgrade directory>/EHPI/java/htdoc. Similar situation is described there.
Thanks
Sunny
Edited by: Sunny Pahuja on Jan 15, 2010 7:55 AM -
Internal Error: Cannot destroy root table.
Hi Everyone!
I am working on a Pagemaker 7 doc, and when I try to delete a duplicate page Pagemaker shows me the following message: "Internal Error: Cannot destroy root table" then the desired page is not deleted.
Can anybody help me?>tive os mesmos problemas mencionados acima...
I had the same problems mentioned above...
There are several different problems mentioned above. Did you have them all?
>instalei o Scribus de http://www.scribus.net/ refiz o documento nele e pronto, gerou PDF e arquivos de publicação, para gráfica , FUNCIONA muito bem excelente
I installed Scribus from ..., remade the document in it, and soon it generated PDFs and files for publication, for graphics, IT WORKS very well excellent
Good for you, your problem seems to be solved.
> è claro que a adobe recomenda que se migre para o indesign, mas além do custo adiciona, temos que lembrar as centenas de arquivos que temos e que provavelmente estarão perdidos...
>...certamente não existirá mais um suporte adequado às nossas necessidades nem desenvolvimento, nem sequer estarão preocupados com as compatibilidades e as nossas intermináveis horas produzindo documentos
it's clear that Adobe reccomends to move on to In_Design but, apart of the additional cost, we must remember the hundreds of files we have and that we will probably loose...
... certainly there will no longer be adequate support for our need for development, not even a concern about compatibilities and the endless hours we have spent producing documents
Well, it has been commented for years now that PageMaker is an obsolete program. It's all right for you to rant, but you certainly knew what you were doing when you kept on using it despite the many warnings.
> ... ainda sobre erros internos, alguém sabe como recuperar arquivos que acusam internal error index ??? quase todos os colegas editoradores que ainda usam o pagemaker depois de julho de 2007 estão encontrando este tipo de erro em suas produções...
... continuing with internal errors, anyone knows how to recover files showing an internal index error??? Almost every publishing colleague still using PageMaker after July 2007 have been receiving this error in their documents...
Please read message #7 above. And if you need further help, don't forget to give details about your setup. For example: are you using PageMaker in 9.2.2, or in OSX Classic? What OS version? What PageMaker version? -
Hi all,
In my environment I have 2 exchange 2013 servers : ex01 & ex02 in 1 DAG01. Recently my ex02 server has problem, some exchange service crash ... I'm still finding reason, maybe because lack of memory ... BTW I have a "Mailbox Database 01":
Get-MailboxDatabaseCopyStatus "Mailbox Database 01"
Name Status ContentIndexState
Mailbox Database 01\EX01 Mounted Healthy
Mailbox Database 01\EX02 Healthy Healthy
When ex02 has problem, something happen with "Mailbox Database 01" copy on both ex01 & ex02, it cannot be mounted on boths. The status of them keep switching : Mounted , Mounting , Initializing , Disconnected... like this:
Get-MailboxDatabaseCopyStatus "Mailbox Database 01"
Name Status ContentIndexState
Mailbox Database 01\EX01 Mounting Failed
Mailbox Database 01\EX02 Initializing Failed
Get-MailboxDatabaseCopyStatus "Mailbox Database 01"
Name Status ContentIndexState
Mailbox Database 01\EX01 Initializing Failed
Mailbox Database 01\EX02 Mounting Failed
Get-MailboxDatabaseCopyStatus "Mailbox Database 01"
Name Status ContentIndexState
Mailbox Database 01\EX01 Disconected Failed
Mailbox Database 01\EX02 Mounting Failed
Until I suspend "Mailbox Database 01" copy on ex02, "Mailbox Database 01" will mount on ex01 successfully, then "Mailbox Database 01" edb file on ex02 has "dirty shutdown" state, and I have to reseed "Mailbox
Database 01" from ex01 to ex02 manually.
Get-ClusterGroup -Cluster EX01
Name OwnerNode State
ClusterGroup ex01 Online
Available Storage ex02 Offline
Get-DatabaseAvailabilityGroup -Status -Identity DAG01 | fl name,primaryActiveManager
Name : DAG01
PrimaryActiveManager : EX01
Please let me know if you need any information.
Thanks for your help.
Jack.Hi John,
Last time, after re-seed the database status changed to healthy on EX02. I have to note that my DAG can failover before, ex: "Mailbox database 01" can be "mounted" on EX01 , "healthy" on EX02 or vice versa and when one server
is down (I unplug network cable for example), the mailbox database copy on the other server is mounted automatically, when down server back to online , the mailbox database copy on it is resynchronized from the other automatically. Like I said it has just
happened recently.
Recently, even when "Mailbox Database 01" is mounted on EX01 , "healthy" on EX02
Get-MailboxDatabaseCopyStatus "Mailbox Database 01"
Name Status ContentIndexState
Mailbox Database 01\EX01 Mounted Healthy
Mailbox Database 01\EX02 Healthy Healthy
When EX02 has problem, "Mailbox Database 01" copy cannot be mounted on boths, its status keep switching...
During problem I have noticed that there are events appear only on EX02, relating to some exchange programs/services are crashed , ex lastime:
Faulting application name: MSExchangeHMWorker.exe, version: 15.0.712.0, time stamp: 0x5199cd1a
Faulting module name: RPCRT4.dll, version: 6.1.7601.21855, time stamp: 0x4eb4c921
Exception code: 0xc0020043
Fault offset: 0x000000000008aa13
Faulting process id: 0x5cfc
Faulting application start time: 0x01d0067aa7da6ac7
Faulting application path: C:\Program Files\Microsoft\Exchange Server\V15\Bin\MSExchangeHMWorker.exe
Faulting module path: C:\Windows\system32\RPCRT4.dll
Report Id: 432d5040-cdfe-11e4-9bb7-3440b58d323f
Faulting application name: svchost.exe_RpcEptMapper, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000374
Fault offset: 0x00000000000c40f2
Faulting process id: 0x2c0
Faulting application start time: 0x01ce90e16804a9e2
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
[RpcHttp] An internal server error occurred. The unhandled exception was: System.TypeInitializationException: The type initializer for 'Microsoft.Exchange.Data.Directory.Globals' threw an exception. ---> System.Runtime.InteropServices.COMException: Call was canceled by the message filter. (Exception from HRESULT: 0x80010002 (RPC_E_CALL_CANCELED))
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.Exchange.Data.Directory.Globals.DetectIfMachineIsVirtualMachine()
at Microsoft.Exchange.Data.Directory.Globals..cctor()
Watson report about to be sent for process id: 19380, with parameters: E12IIS, c-RTL-AMD64, 15.00.0712.024, w3wp#MSExchangeRpcProxyAppPool, M.E.Data.Directory, M.E.D.D.Globals.DetectIfMachineIsVirtualMachine, System.TypeInitializationException, 55de, 15.00.0712.016.
ErrorReportingEnabled: False
[RpcHttp] An internal server error occurred. The unhandled exception was: System.TypeInitializationException: The type initializer for 'Microsoft.Exchange.Data.Directory.Globals' threw an exception. ---> System.Runtime.InteropServices.COMException: Call was canceled by the message filter. (Exception from HRESULT: 0x80010002 (RPC_E_CALL_CANCELED))
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.Exchange.Data.Directory.Globals.DetectIfMachineIsVirtualMachine()
at Microsoft.Exchange.Data.Directory.Globals..cctor()
and this time, I found one event appear only on EX02 before problem happened :
Log Name: Application
Source: MSExchange Transport Migration
Date: 3/28/2015 10:34:01 AM
Event ID: 2005
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: EX02.mydomain.com
Description:
An unexpected failure has occurred. The problem was ignored but may indicate other problems in the system. Diagnostic information:
at Microsoft.Exchange.Data.Storage.MapiPropertyBag.SaveChanges(Boolean force) at Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.SaveChanges(Boolean force) at Microsoft.Exchange.Data.Storage.AcrPropertyBag.SaveChanges(Boolean force) at Microsoft.Exchange.Data.Storage.CoreItem.InternalSave(SaveMode saveMode, CallbackContext callbackContext) at Microsoft.Exchange.Data.Storage.Item.SaveInternal(SaveMode saveMode, Boolean commit) at Microsoft.Exchange.Data.Storage.Item.Save(SaveMode saveMode) at Microsoft.Exchange.Migration.MigrationJob.UpdatePoisonCount(IMigrationDataProvider provider, Int32 count) at Microsoft.Exchange.MailboxReplicationService.CommonUtils.ProcessKnownExceptions(Action actionDelegate, FailureDelegate failureDelegate)|Error clearing posion count for job: local move 3:14a96ad4-4506-4ab8-9be7-c0308a72e555:ExchangeLocalMove:Staged:4:[email protected]:Completed:11/26/2013 7:59:11 PM::|Microsoft.Exchange.Data.Storage.ConnectionFailedTransientException|Cannot save changes made to an item to store.|InnerException:MapiExceptionNetworkError:16.55847:3E000000, 18.59943:BE060000BD07000000000000, 0.62184:00000000, 255.16280:BE0600006E2F610000000000, 255.8600:A81D0000, 255.12696:802C8F080869D001000FC882, 255.10648:02000000, 255.14744:BE060000, 255.9624:F2030000, 255.13720:00000000, 255.11672:01000000, 255.12952:00000000010700C000000000, 3.23260:BE060000, 0.43249:000FC882, 4.39153:15010480, 4.32881:15010480, 0.50035:07000000, 4.64625:15010480, 20.52176:000FC88211001010FE000000, 20.50032:000FC8827E17401076040000, 0.50128:00000000, 0.50288:00000000, 4.23354:15010480, 0.25913:76040000, 255.21817:15010480, 0.17361:76040000, 4.19665:15010480, 0.37632:76040000, 4.37888:15010480|Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to save changes. (hr=0x80040115, ec=0) Diagnostic context: Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=62] Lid: 59943 EMSMDBPOOL.EcPoolSessionDoRpc exception [rpc_status=0x6BE][latency=1981] Lid: 62184 Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 7592 Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 3/28/0415 3:34:01 AM Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1726 Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 1010 Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 1 Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[0]: Long val: 3221227265 Lid: 23260 Win32Error: 0x6BE Lid: 43249 Lid: 39153 StoreEc: 0x80040115 Lid: 32881 StoreEc: 0x80040115 Lid: 50035 Lid: 64625 StoreEc: 0x80040115 Lid: 52176 ClientVersion: 15.0.712.17 Lid: 50032 ServerVersion: 15.0.712.6014 Lid: 50128 Lid: 50288 Lid: 23354 StoreEc: 0x80040115 Lid: 25913 Lid: 21817 ROP Failure: 0x80040115 Lid: 17361 Lid: 19665 StoreEc: 0x80040115 Lid: 37632 Lid: 37888 StoreEc: 0x80040115 at Microsoft.Mapi.MapiExceptionHelper.InternalThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, Int32 ec, DiagnosticContext diagCtx, Exception innerException) at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, IExInterface iUnknown, Exception innerException) at Microsoft.Mapi.MapiProp.SaveChanges(SaveChangesFlags flags) at Microsoft.Exchange.Data.Storage.MapiPropertyBag.SaveChanges(Boolean force)|: ,,
%2
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange Transport Migration" />
<EventID Qualifiers="49152">2005</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-03-28T03:34:01.000000000Z" />
<EventRecordID>10409597</EventRecordID>
<Channel>Application</Channel>
<Computer>IDCEXC002.itl.com</Computer>
<Security />
</System>
<EventData>
<Data> at Microsoft.Exchange.Data.Storage.MapiPropertyBag.SaveChanges(Boolean force) at Microsoft.Exchange.Data.Storage.StoreObjectPropertyBag.SaveChanges(Boolean force) at Microsoft.Exchange.Data.Storage.AcrPropertyBag.SaveChanges(Boolean force) at Microsoft.Exchange.Data.Storage.CoreItem.InternalSave(SaveMode saveMode, CallbackContext callbackContext) at Microsoft.Exchange.Data.Storage.Item.SaveInternal(SaveMode saveMode, Boolean commit) at Microsoft.Exchange.Data.Storage.Item.Save(SaveMode saveMode) at Microsoft.Exchange.Migration.MigrationJob.UpdatePoisonCount(IMigrationDataProvider provider, Int32 count) at Microsoft.Exchange.MailboxReplicationService.CommonUtils.ProcessKnownExceptions(Action actionDelegate, FailureDelegate failureDelegate)|Error clearing posion count for job: local move 3:14a96ad4-4506-4ab8-9be7-c0308a72e555:ExchangeLocalMove:Staged:4:[email protected]:Completed:11/26/2013 7:59:11 PM::|Microsoft.Exchange.Data.Storage.ConnectionFailedTransientException|Cannot save changes made to an item to store.|InnerException:MapiExceptionNetworkError:16.55847:3E000000, 18.59943:BE060000BD07000000000000, 0.62184:00000000, 255.16280:BE0600006E2F610000000000, 255.8600:A81D0000, 255.12696:802C8F080869D001000FC882, 255.10648:02000000, 255.14744:BE060000, 255.9624:F2030000, 255.13720:00000000, 255.11672:01000000, 255.12952:00000000010700C000000000, 3.23260:BE060000, 0.43249:000FC882, 4.39153:15010480, 4.32881:15010480, 0.50035:07000000, 4.64625:15010480, 20.52176:000FC88211001010FE000000, 20.50032:000FC8827E17401076040000, 0.50128:00000000, 0.50288:00000000, 4.23354:15010480, 0.25913:76040000, 255.21817:15010480, 0.17361:76040000, 4.19665:15010480, 0.37632:76040000, 4.37888:15010480|Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError: Unable to save changes. (hr=0x80040115, ec=0) Diagnostic context: Lid: 55847 EMSMDBPOOL.EcPoolSessionDoRpc called [length=62] Lid: 59943 EMSMDBPOOL.EcPoolSessionDoRpc exception [rpc_status=0x6BE][latency=1981] Lid: 62184 Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 7592 Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 3/28/0415 3:34:01 AM Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 2 Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1726 Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 1010 Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 1 Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[0]: Long val: 3221227265 Lid: 23260 Win32Error: 0x6BE Lid: 43249 Lid: 39153 StoreEc: 0x80040115 Lid: 32881 StoreEc: 0x80040115 Lid: 50035 Lid: 64625 StoreEc: 0x80040115 Lid: 52176 ClientVersion: 15.0.712.17 Lid: 50032 ServerVersion: 15.0.712.6014 Lid: 50128 Lid: 50288 Lid: 23354 StoreEc: 0x80040115 Lid: 25913 Lid: 21817 ROP Failure: 0x80040115 Lid: 17361 Lid: 19665 StoreEc: 0x80040115 Lid: 37632 Lid: 37888 StoreEc: 0x80040115 at Microsoft.Mapi.MapiExceptionHelper.InternalThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, Int32 ec, DiagnosticContext diagCtx, Exception innerException) at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, IExInterface iUnknown, Exception innerException) at Microsoft.Mapi.MapiProp.SaveChanges(SaveChangesFlags flags) at Microsoft.Exchange.Data.Storage.MapiPropertyBag.SaveChanges(Boolean force)|: ,,</Data>
</EventData>
</Event>
I also noticed that "Mailbox Database 01" edb file on EX02 has "dirty shutdown" state (yes, last time too)
eseutil /mh “path to Mailbox Database 01 edb file on EX02″ and result :
State: Dirty Shutdown
Log Required: 4656967-4657077 (0x470f47-0x470fb5)
Log Committed: 0-4657078 (0x0-0x470fb6)
I'm going to reseed "Mailbox Database 01" copy on EX02 tonight, should I repair it with eseutil /r to get it into clean shutdown state before ?
How can I check if my DAG configuration is fine ? Is result from Get-Clustergroup before ok ? -
Cannot add cluster disk on windows 2012
I have 2 servers connected to a shared storage array using Fibre Channel. Currently there are 2 luns on the storage device.
From the Failover Cluster Manager, when I select “Add Disk” from Storage – Disks, both luns show up and I can add them without problems. But if I choose to only
add one of them first (it doesn't make a difference which one is added first), then it will not allow adding the second one later. I get a message: "No disks suitable for cluster disks were found. For diagnostic information about disks available to the
cluster, use Validate a Configuration Wizard to run Storage tests."
When I do add one (or both disks at the same time), they work just fine for failover clustering.
I can’t imagine this is by design. Is this a known/unknown issue, or is there something special that needs to be done?
ThanksOk, no problem. I run the validation tests (Validate Cluster - Storage only) and I received the details shown below. I can clearly see that Cluster Validation tool does not find any disk suitable for 2012 cluster, and even I can see why (it is plain English).
Unfortunately this still does not explain how to fix the problem. Recommendations like "run Clear-ClusterDiskReservation PowerShell cmdlet to remove the Persistent Reservation from the disk" do not work - this discussion is available in another thread where
people having the same issue and no luck so far. I guess that I'm using old SAN (and I know that) that simply does not support SCSI-3 persistent reservation so those disks cannot be used in 2012 cluster. Oh well, will have to wait fro new SAN and then I can
play again...
Validation test results:
Physical disk with identifier {95059d50-a173-49bd-b029-fec326acd78c} has an existing Persistent Reservation placed on it, and will be removed from the validation set. This disk may already be clustered, on a different cluster or in use by another system.
Please verify the storage configuration and LUN zoning. If you wish to cluster this disk, you can use the Clear-ClusterDiskReservation PowerShell cmdlet to remove the Persistent Reservation from the disk.
Physical disk with identifier {0b301c72-c88f-47ee-9389-11efdeed6cdb} has an existing Persistent Reservation placed on it, and will be removed from the validation set. This disk may already be clustered, on a different cluster or in use by another system.
Please verify the storage configuration and LUN zoning. If you wish to cluster this disk, you can use the Clear-ClusterDiskReservation PowerShell cmdlet to remove the Persistent Reservation from the disk.
Physical disk with identifier {eec0be37-5dfe-47f7-a149-4f1dec18450b} has an existing Persistent Reservation placed on it, and will be removed from the validation set. This disk may already be clustered, on a different cluster or in use by another system.
Please verify the storage configuration and LUN zoning. If you wish to cluster this disk, you can use the Clear-ClusterDiskReservation PowerShell cmdlet to remove the Persistent Reservation from the disk.
Physical disk with identifier {dcb8b1fe-7671-41c9-b996-da26c0b93751} has an existing Persistent Reservation placed on it, and will be removed from the validation set. This disk may already be clustered, on a different cluster or in use by another system.
Please verify the storage configuration and LUN zoning. If you wish to cluster this disk, you can use the Clear-ClusterDiskReservation PowerShell cmdlet to remove the Persistent Reservation from the disk.
No disks were found on which to perform cluster validation tests. To correct this, review the following possible causes:
* The disks are already clustered and currently Online in the cluster. When testing a working cluster, ensure that the disks that you want to test are Offline in the cluster.
* The disks are unsuitable for clustering. Boot volumes, system volumes, disks used for paging or dump files, etc., are examples of disks unsuitable for clustering.
* Review the "List Disks" test. Ensure that the disks you want to test are unmasked, that is, your masking or zoning does not prevent access to the disks. If the disks seem to be unmasked or zoned correctly but could not be tested, try restarting the servers
before running the validation tests again.
* The cluster does not use shared storage. A cluster must use a hardware solution based either on shared storage or on replication between nodes. If your solution is based on replication between nodes, you do not need to rerun Storage tests. Instead, work
with the provider of your replication solution to ensure that replicated copies of the cluster configuration database can be maintained across the nodes.
* The disks are Online in the cluster and are in maintenance mode. No disks were found on which to perform cluster validation tests. -
Hyper-V Cluster. Cannot ping Cluster A.D. account in nodes
Hi
I've got H-V cluster with two nodes TN1 and TN2.
On TN1 i can ping A.D. cluster account TC1 (ping tc1: 10.1.1.23) but on TN2 i cannot do it. I get:
Ping request could not find host thvc1. Please check the name and try again.
At this time cluster is hosted by TN2 (Information from MMC cluster manager console).
If i try ping other host in netowrk, TN1 use IPv6 address of interface:
ping tytan
Pinging Tytan [fe80::642e:74f1:ae87:8b75%19] with 32 bytes of data:
Reply from fe80::642e:74f1:ae87:8b75%19: time<1ms
but on TN2 it is used IPv4 address:
Pinging tytan.tcn.toya.pl [10.1.1.11] with 32 bytes of data:
Reply from 10.1.1.11: bytes=32 time<1ms TTL=128
1. Why ping on two nodes are not the same?
2. Why can I ping A.D. cluster account?
Thank you for help!
Kind Regards TomaszHi Yukio Seki,
From the current information, It seems like the Windows Firewall settings issue, Could you temporarily disable both node
firewall then test the ping again?
The related KB:
To configure IPv6 Internet Connection Firewall
https://technet.microsoft.com/en-us/library/bb726938.aspx?f=255&MSPPError=-2147217396
Best Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Cannot reach cluster ip after configuring network load balancing
I have set up NLB for 2 WFE of SharePoint 2013:
WFE1 : private ip 192.168.1.100 ; public ip 172.1.1.1
WFE2 : private ip 192.168.1.101 ; public ip 172.1.1.2
Cluster ip: 172.1.1.3
I used 2 private ip in NLB and select unicast, but I cannot reach the cluster ip from out of these 2 WFE server.
Any body can help me? Thanks in advance.
AwenYes, I follow these steps and created NLB successfully, but cannot ping the cluster ip from outside these hosts server in NLB. Below is detail information:
OS: windows 2008 R2 64 bit
Sharepoint : 2013
WFE1 : private ip 192.168.1.100 ; public ip 172.1.1.1
WFE2 : private ip 192.168.1.101 ; public ip 172.1.1.2
private ip 100/101 can be communicated with each other, but cannot reach from other servers, even with same subnet.
Cluster ip: 172.1.1.3
After created NLB with unicast, I can ping the cluster ip from these WFE servers, but when I enter the cluster ip in browser, nothing display and cannot ping the cluster ip from other servers.
Awen -
Cannot start BI server, cannot start cluster successfully, core dumped
Hi
I have the following configuration. The four machines are virtualized containers on solaris sparc
machine 1 - PS, java host, web logic
machine 2 - PS, java host, web logic
machine 3 - bi server, primary cluster controller, scheduler
machine 4 - bi server, secondary cluster controller, scheduler
However i dont need the scheduler and i have not configured them completely
I was able to successfully test on compete stack with no clustering and used only machines 1 and 3. I was able to login to the sample URL and see some graphs.
The problem started once i was trying the clustering. I looked at the admin docs and the installation and deployment guides and followed the instructions and carefully did the configuration.
I face multiple problems.
In single stack some time the BI server was randoly stopping itself for no reason after starting it. it was very random that i used to feel happy if it does not stop.
During clustering i was not able to start the cluster successfully at all. I did not want to worry about scheduler to start with and even the PS. I just wanted to connect to the BI server using the primary ccs and using the admin tool in the windows machine.
Today morning i tried to start the BI server and then there was a core dump in both the machines and then i am not even able to start the server at all. There was nothing in the log files and i dont know what to do.
The log files before the core dump as follows.
server log file
2009-07-30 18:18:47
[36007] Loading repository /software/oraclebi/server/Repository/samplesales.rpd.
2009-07-30 18:18:49
[14055] Loading subject area: Sample Sales ...
2009-07-30 18:18:49
[14056] Finished loading subject area: Sample Sales.
2009-07-30 18:18:49
[58002] Query Cache loaded with 7 entries from saved cache files.
2009-07-30 18:18:49
[43030] : Oracle BI Server (64-bit) started. Version: 10.1.3.4.1.090414.1900.
2009-07-30 18:19:11
[43031] : Oracle BI Server shutdown.
2009-07-30 18:19:12
[58001] Query Cache Statistics -- Hits:0(0%), Qualified Misses:0(0%), Unqualified Misses:0(0%).
2009-07-30 18:19:12
[14058] Unloaded all subject areas.
2009-07-30 18:25:25
[36007] Loading repository /software/oraclebi/server/Repository/samplesales.rpd.
2009-07-30 18:25:27
[14055] Loading subject area: Sample Sales ...
2009-07-30 18:25:27
[14056] Finished loading subject area: Sample Sales.
2009-07-30 18:25:27
[58002] Query Cache loaded with 7 entries from saved cache files.
2009-07-30 18:25:27
[43030] : Oracle BI Server (64-bit) started. Version: 10.1.3.4.1.090414.1900.
2009-07-30 18:26:25
[43071] A connection with Cluster Controller maa-zone4:9706 was established.
2009-07-30 18:30:08
[nQSError: 12002] Socket communication error at call=recv: (Number=131) Connection reset by peer
2009-07-30 18:30:08
[nQSError: 12002] Socket communication error at call=recv: (Number=131) Connection reset by peer
2009-07-30 20:57:24
[36007] Loading repository /software/oraclebi/server/Repository/samplesales.rpd.
2009-07-30 20:57:26
[14055] Loading subject area: Sample Sales ...
2009-07-30 20:57:26
[14056] Finished loading subject area: Sample Sales.
2009-07-30 20:57:26
[58002] Query Cache loaded with 7 entries from saved cache files.
2009-07-30 20:57:26
[43030] : Oracle BI Server (64-bit) started. Version: 10.1.3.4.1.090414.1900.
2009-07-30 20:58:39
[43031] : Oracle BI Server shutdown.
2009-07-30 20:58:39
[58001] Query Cache Statistics -- Hits:0(0%), Qualified Misses:0(0%), Unqualified Misses:0(0%).
2009-07-30 20:58:39
[14058] Unloaded all subject areas.
2009-07-30 21:01:40
[36007] Loading repository /software/oraclebi/server/Repository/samplesales.rpd.
2009-07-30 21:01:42
[14055] Loading subject area: Sample Sales ...
2009-07-30 21:01:42
[14056] Finished loading subject area: Sample Sales.
2009-07-30 21:01:42
[58002] Query Cache loaded with 7 entries from saved cache files.
2009-07-30 21:01:42
[43030] : Oracle BI Server (64-bit) started. Version: 10.1.3.4.1.090414.1900.
2009-07-30 21:08:51
[43071] A connection with Cluster Controller maa-zone4:9706 was established.
2009-07-30 21:10:31
[43065] The connection with Cluster Controller maa-zone4:9706 was lost.
2009-07-30 21:12:59
[43071] A connection with Cluster Controller maa-zone4:9706 was established.
:x
$ ls
cluster controller log file
2009-07-30 21:12:59
[71008] Cluster Controller started. Version: 10.1.3.4.1.090414.1900
2009-07-30 21:12:59
[71021] An attempt to establish a connection with Oracle BI Server maa-zone03:9703 failed.
2009-07-30 21:12:59
[71020] A connection with Oracle BI Server maa-zone4:9703 was established.
2009-07-30 21:12:59
[71010] Oracle BI Server maa-zone4:9703 has transitioned to ONLINE state.
2009-07-30 21:13:14
[71050] This Cluster Controller is promoted to Controlling because there has been no recent contact from
the Primary Cluster Controller.
2009-07-30 21:13:14
[71071] An attempt to establish a connection with Oracle BI Scheduler maa-zone03:9705 failed.
2009-07-30 21:13:14
[71068] Oracle BI Scheduler maa-zone03:9705 has transitioned to OFFLINE state.
2009-07-30 21:13:14
[71071] An attempt to establish a connection with Oracle BI Scheduler maa-zone4:9705 failed.
2009-07-30 21:13:14
[71068] Oracle BI Scheduler maa-zone4:9705 has transitioned to OFFLINE state.
2009-07-30 23:10:34
[71019] The connection with Oracle BI Server maa-zone4:9703 was lost.
2009-07-30 23:10:34
[71011] Oracle BI Server maa-zone4:9703 has transitioned to OFFLINE state.
2009-07-30 23:10:39
[71021] An attempt to establish a connection with Oracle BI Server maa-zone4:9703 failed.
your help is appreciated.
thanks
chaitanya kadaruall the four machines are four containers in a solaris server.
The problem was with the hosts file, there were not entries matching the ipaddress and the hotname.
After i fixed it now i have a stable BI servers and cluster controllers.
Now i configured the presentation services to connect to the BI servers but i am getting the following exception.
Type: Error
Severity: 42
Time: Thu Aug 6 13:04:02 2009
File: project/webcomm/socket.cpp Line: 892
Properties: ThreadID-6
Location:
saw.rpc.client.impl.verify
saw.rpc.client.impl.initFixedRPC
saw.rpc.client.cluster
saw.threads
An error occurred during execution of "connect". Connection refused [Socket:15]
Any idea?
thanks -
JSPM: Cannot restart cluster in safe mode / JSPM still wait for the Cluster
Hello,
i try to deploy some new packages for my J2EE.
The JSPM works fine.
After the sixth package he restartet the J2EE Engine and wait and wait and wait and wait...
In the log file of JSPM i find this:
#1.5 #C000AC1082210000000009D252275227000459AF45746358#1224509226247#/System/Server/Upgrade/JSPM##com.sap.sdt.j700.startupfrmw.J2EEClusterController700#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j700.startupfrmw.J2EEClusterController700#Java###Cluster has not been started. Waiting for another {0} seconds...#1#10#
#1.5 #C000AC1082210000000009D352275227000459AF460D1918#1224509236254#/System/Server/Upgrade/JSPM##com.sap.sdt.j700.startupfrmw.J2EEClusterController700#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j700.startupfrmw.J2EEClusterController700#Java###A dispatcher is running on instance {0}.#1#JC_p570vc11_BW2_01 #
#1.5 #C000AC1082210000000009D452275227000459AF460D1918#1224509236255#/System/Server/Upgrade/JSPM##com.sap.sdt.j700.startupfrmw.J2EEClusterController700#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j700.startupfrmw.J2EEClusterController700#Java###A server is running on instance {0}.#1#JC_p570vc11_BW2_01 #
#1.5 #C000AC1082210000000009D552275227000459AF460D1D00#1224509236256#/System/Server/Upgrade/JSPM##com.sap.sdt.j700.startupfrmw.J2EEClusterController700#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j700.startupfrmw.J2EEClusterController700#Java###Cluster has not been started. Waiting for another {0} seconds...#1#10#
#1.5 #C000AC1082210000000009D652275227000459AF46A5D6A8#1224509246265#/System/Server/Upgrade/JSPM##com.sap.sdt.j700.startupfrmw.J2EEClusterController700#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j700.startupfrmw.J2EEClusterController700#Java###A dispatcher is running on instance {0}.#1#JC_p570vc11_BW2_01 #
#1.5 #C000AC1082210000000009D752275227000459AF46A5DA90#1224509246266#/System/Server/Upgrade/JSPM##com.sap.sdt.j700.startupfrmw.J2EEClusterController700#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j700.startupfrmw.J2EEClusterController700#Java###A server is running on instance {0}.#1#JC_p570vc11_BW2_01 #
#1.5 #C000AC1082210000000009D852275227000459AF46A5DE78#1224509246267#/System/Server/Upgrade/JSPM##com.sap.sdt.j700.startupfrmw.J2EEClusterController700#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j700.startupfrmw.J2EEClusterController700#Java###Cluster has not been started. Waiting for another {0} seconds...#1#10#
#1.5 #C000AC1082210000000009D952275227000459AF473F6728#1224509256329#/System/Server/Upgrade/JSPM##com.sap.sdt.j700.startupfrmw.J2EEClusterController700#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j700.startupfrmw.J2EEClusterController700#Java###A dispatcher is running on instance {0}.#1#JC_p570vc11_BW2_01 #
#1.5 #C000AC1082210000000009DA52275227000459AF473F7AB0#1224509256334#/System/Server/Upgrade/JSPM##com.sap.sdt.j700.startupfrmw.J2EEClusterController700#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j700.startupfrmw.J2EEClusterController700#Java###A server is running on instance {0}.#1#JC_p570vc11_BW2_01 #
#1.5 #C000AC1082210000000009DB52275227000459AF473F7E98#1224509256335#/System/Server/Upgrade/JSPM##com.sap.sdt.j700.startupfrmw.J2EEClusterController700#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j700.startupfrmw.J2EEClusterController700#Java###Cluster has not been started. Waiting for another {0} seconds...#1#10#
The SAP Note 1037478 dosn't help, because we have JSPM SP16.
Have restart the Engine manually, but nothing happend.
I couln't found any error in other log's.
some ideas?last night we have restart the system ABAP & JAVA.
the system is full funktional ABAP & JAVA.
now i tried to deploy with JSPM again.
the JSPM restart the J2EE for run in save mode...
std_server0.out
stdout/stderr redirect
node name : server0
pid : 475296
system name : BW2
system nr. : 01
started at : Wed Oct 22 09:26:26 2008
[Thr 01] MtxInit: 10001 0 0
<?xml version="1.0" ?>
<verbosegc version="20070227_AA">
SAP J2EE Engine Version 7.00 PatchLevel 111772.44 is starting...
Loading: LogManager ... 2528 ms.
Loading: PoolManager ... 5 ms.
Loading: ApplicationThreadManager ... 566 ms.
Loading: ThreadManager ... 31 ms.
Loading: IpVerificationManager ... 15 ms.
Loading: ClassLoaderManager ... 26 ms.
Loading: ClusterManager ... 776 ms.
Loading: LockingManager ... 151 ms.
Loading: ConfigurationManager ... 3203 ms.
Loading: LicensingManager ... 39 ms.
Loading: CacheManager ... 250 ms.
Loading: ServiceManager ...
Loading services.:
Service DQE started. (8 ms).
Service runtimeinfo started. (53 ms).
Service caf~eu~odi~mnuacc started. (0 ms).
Service cross started. (206 ms).
Service file started. (137 ms).
Service timeout started. (171 ms).
Service memory started. (181 ms).
Service trex.service started. (136 ms).
Service p4 started. (569 ms).
Service caf~eu~cc~api started. (895 ms).
Service userstore started. (11 ms).
Service classpath_resolver started. (104 ms).
Service jmx_notification started. (72 ms).
Service deploy started. (8824 ms).
Service com.sap.portal.runtime.config.kmreadonly started. (4 ms).
Service MigrationService started. (33 ms).
Service bi~mmr~deployer started. (9 ms).
Service log_configurator started. (11307 ms).
Service locking started. (6 ms).
Service http started. (353 ms).
Service naming started. (732 ms).
Service failover started. (45 ms).
Service ts started. (162 ms).
Service appclient started. (88 ms).
Service javamail started. (219 ms).
Service licensing started. (52 ms).
Service jmsconnector started. (242 ms).
Service connector started. (322 ms).
Service configuration started. (44 ms).
Service iiop started. (565 ms).
Service webservices started. (1055 ms).
Service dbpool started. (2300 ms).
Service UT started. (12 ms).
Service caf~eu~gp~mail~cf started. (56 ms).
Service com.sap.security.core.ume.service started. (9110 ms).
Service security started. (1349 ms).
Service classload started. (121 ms).
Service applocking started. (241 ms).
Service shell started. (327 ms).
Service tc~eCATTPing~service started. (30 ms).
Service telnet started. (59 ms).
Service keystore started. (1021 ms).
Service ssl started. (27 ms).
Service developmentserver started. (456 ms).
Service tc~sec~securestorage~service started. (309 ms).
Service tc~sec~certrevoc~service started. (373 ms).
Service servlet_jsp started. (1565 ms).
Service ejb started. (1646 ms).
Service dsr started. (418 ms).
Service jmx started. (2046 ms).
Service caf~um~metadata~imp started. (1250 ms).
Service caf~eu~gp~model started. (101 ms).
Service caf~eu~er~service started. (0 ms).
Service tc~sec~wssec~service started. (977 ms).
Service tc~eu~jwf~ui~wizsvc started. (586 ms).
Service tc~lm~ctc~confs~service_sda started. (945 ms).
Service CUL started. (942 ms).
Service tc~sec~destinations~service started. (1784 ms).
Service caf~runtime~connectivity~impl started. (27021 ms).
Service sld started. (2000 ms).
Service com.adobe~DataManagerService started. (1380 ms).
Service webdynpro started. (1434 ms).
Service rfcengine started. (1688 ms).
Service tc~di~sdic~srv started. (6252 ms).
Service prtbridge started. (2794 ms).
Service com.adobe~DocumentServicesDestProtoService started. (1825 ms).
Service com.adobe~DocumentServicesLicenseSupportService started. (2958 ms).
Service tc~sec~vsi~service started. (2159 ms).
Service caf~um~relgroups~imp started. (3335 ms).
Service basicadmin started. (3899 ms).
Service adminadapter started. (198 ms).
Service apptracing started. (680 ms).
Service com.adobe~LicenseService started. (237 ms).
Service com.sap.portal.pcd.gl started. (72 ms).
Service pmi started. (183 ms).
Service com.adobe~DocumentServicesBinaries2 started. (4177 ms).
Service com.sap.portal.prt.sapj2ee started. (275 ms).
Service com.adobe~DocumentServicesConfiguration started. (385 ms).
Service com.adobe~TrustManagerService started. (204 ms).
Service com.adobe~XMLFormService started. (4954 ms).
Service monitor started. (1365 ms).
Service jms_provider started. (5862 ms).
Service com.adobe~PDFManipulation started. (5913 ms).
Service com.adobe~FontManagerService started. (7023 ms).
Service tc.monitoring.logviewer started. (8129 ms).
ServiceManager started for 43037 ms.
Framework started for 53259 ms.
SAP J2EE Engine Version 7.00 PatchLevel 111772.44 is running!
PatchLevel 111772.44 June 09, 2008 16:28 GMT
>
dev_server0
trc file: "/usr/sap/BW2/DVEBMGS01/work/dev_server0", trc level: 1, release: "700"
node name : ID14451950
pid : 442380
system name : BW2
system nr. : 01
started at : Wed Oct 22 09:26:26 2008
arguments :
arg[00] : /usr/sap/BW2/DVEBMGS01/exe/jlaunch
arg[01] : pf=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
arg[02] : -DSAPINFO=BW2_01_server
arg[03] : pf=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
arg[04] : -DSAPSTART=1
arg[05] : -DCONNECT_PORT=60329
arg[06] : -DSAPSYSTEM=01
arg[07] : -DSAPSYSTEMNAME=BW2
arg[08] : -DSAPMYNAME=p570vc11_BW2_01
arg[09] : -DSAPPROFILE=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
arg[10] : -DFRFC_FALLBACK=ON
arg[11] : -DFRFC_FALLBACK_HOST=localhost
[Thr 01] Wed Oct 22 09:26:26 2008
[Thr 01] *** WARNING => INFO: Unknown property [instance.box.number=BW2DVEBMGS01p570vc11] [jstartxx_mt. 841]
[Thr 01] *** WARNING => INFO: Unknown property [instance.en.host=bw2scs] [jstartxx_mt. 841]
[Thr 01] *** WARNING => INFO: Unknown property [instance.en.port=3250] [jstartxx_mt. 841]
[Thr 01] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx_mt. 841]
JStartupReadInstanceProperties: read instance properties [/usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties]
-> ms host : bw2scs
-> ms port : 3950
-> OS libs : /usr/sap/BW2/DVEBMGS01/j2ee/os_libs
-> Admin URL :
-> run mode : safe
-> run action : UPGRADE
-> enabled : yes
Used property files
-> files [00] : /usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
Instance properties
-> ms host : bw2scs
-> ms port : 3950
-> os libs : /usr/sap/BW2/DVEBMGS01/j2ee/os_libs
-> admin URL :
-> run mode : safe
-> run action : UPGRADE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : /usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
-> [01] bootstrap_ID14451900 : /usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
-> [02] bootstrap_ID14451950 : /usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
Worker nodes
-> [00] ID14451900 : /usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
-> [01] ID14451950 : /usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
[Thr 01] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 01] JLaunchRequestQueueInit: create pipe listener thread
[Thr 258] JLaunchRequestFunc: Thread 258 started as listener thread for np messages.
[Thr 515] WaitSyncSemThread: Thread 515 started as semaphore monitor thread.
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 01] CPIC (version=700.2006.09.13)
[Thr 01] [Node: server0] java home is set by profile parameter
Java Home: /usr/java14_64
[Thr 01] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/BW2/DVEBMGS01/exe/jvmx.jar
JStartupIReadSection: read node properties [ID14451950]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : /usr/java14_64
-> java parameters : -verbose:gc -Djco.jarm=1 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -verbose:gc -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
-> java vm version : J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20070510a (JIT enabled)
-> java vm vendor : IBM J9 VM (IBM Corporation)
-> java vm type : server
-> java vm cpu : ppc64
-> heap size : 2048M
-> init heap size : 2048M
-> root path : /usr/sap/BW2/DVEBMGS01/j2ee/cluster/server0
-> class path : ./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
-> OS libs path : /usr/sap/BW2/DVEBMGS01/j2ee/os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/BW2/DVEBMGS01/exe/jstartup.jar:/usr/sap/BW2/DVEBMGS01/exe/jvmx.jar
-> shutdown class : com.sap.engine.boot.Start
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50121
-> shutdown timeout : 120000
[Thr 01] JLaunchISetDebugMode: set debug mode [no]
[Thr 772] JLaunchIStartFunc: Thread 772 started as Java VM thread.
JHVM_LoadJavaVM: VM Arguments of node [server0]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -verbose:gc
-> arg[ 4]: -Djco.jarm=1
-> arg[ 5]: -Djava.security.policy=./java.policy
-> arg[ 6]: -Djava.security.egd=file:/dev/urandom
-> arg[ 7]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-> arg[ 8]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-> arg[ 9]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
-> arg[ 10]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
-> arg[ 11]: -verbose:gc
-> arg[ 12]: -Dstartup.mode=SAFE
-> arg[ 13]: -Dstartup.action=UPGRADE
-> arg[ 14]: -Dsys.global.dir=/usr/sap/BW2/SYS/global
-> arg[ 15]: -Dapplication.home=/usr/sap/BW2/DVEBMGS01/exe
-> arg[ 16]: -Djava.class.path=/usr/sap/BW2/DVEBMGS01/exe/jstartup.jar:/usr/sap/BW2/DVEBMGS01/exe/jvmx.jar:./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
-> arg[ 17]: -Djava.library.path=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/SYS/exe/run:/oracle/client/10x_64/instantclient:/usr/sap/BW2/DVEBMGS01/exe::/usr/lib:/usr/sap/BW2/DVEBMGS01/j2ee/os_libs:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/lib:/lib:/usr/sap/BW2/SYS/exe/run:/oracle/client/10x_64/instantclient
-> arg[ 18]: -Dmemory.manager=2048M
-> arg[ 19]: -Xmx2048M
-> arg[ 20]: -Xms2048M
-> arg[ 21]: -DLoadBalanceRestricted=no
-> arg[ 22]: -Djstartup.mode=JCONTROL
-> arg[ 23]: -Djstartup.ownProcessId=442380
-> arg[ 24]: -Djstartup.ownHardwareId=T1308487043
-> arg[ 25]: -Djstartup.whoami=server
-> arg[ 26]: -Djstartup.debuggable=no
-> arg[ 27]: -DSAPINFO=BW2_01_server
-> arg[ 28]: -DSAPSTART=1
-> arg[ 29]: -DCONNECT_PORT=60329
-> arg[ 30]: -DSAPSYSTEM=01
-> arg[ 31]: -DSAPSYSTEMNAME=BW2
-> arg[ 32]: -DSAPMYNAME=p570vc11_BW2_01
-> arg[ 33]: -DSAPPROFILE=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[ 34]: -DFRFC_FALLBACK=ON
-> arg[ 35]: -DFRFC_FALLBACK_HOST=localhost
-> arg[ 36]: -DSAPSTARTUP=1
-> arg[ 37]: -DSAPSYSTEM=01
-> arg[ 38]: -DSAPSYSTEMNAME=BW2
-> arg[ 39]: -DSAPMYNAME=p570vc11_BW2_01
-> arg[ 40]: -DSAPDBHOST=bw2dba
-> arg[ 41]: -Dj2ee.dbhost=bw2dba
[Thr 772] Wed Oct 22 09:26:27 2008
[Thr 772] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [server0]
[Thr 3343] Wed Oct 22 09:26:36 2008
[Thr 3343] JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
[Thr 3343] Wed Oct 22 09:26:37 2008
[Thr 3343] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 3343] JLaunchISetClusterId: set cluster id 14451950
[Thr 3343] Wed Oct 22 09:26:38 2008
[Thr 3343] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 3343] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 33670] Wed Oct 22 09:27:08 2008
[Thr 33670] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 33670] JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
[Thr 33670] Wed Oct 22 09:27:09 2008
[Thr 33670] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.engine.Compress
[Thr 35726] Wed Oct 22 09:27:19 2008
[Thr 35726] JHVM_RegisterNatives: registering methods in com.sap.security.core.server.vsi.service.jni.VirusScanInterface
[Thr 3343] Wed Oct 22 09:27:25 2008
[Thr 3343] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
[Thr 18507] Wed Oct 22 09:27:33 2008
[Thr 18507] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
dev_jcontrol
[Thr 772] Wed Oct 22 09:26:04 2008
[Thr 772] JControlProcessMessage: received <shutdown and restart> command
[Thr 772] JControlIStopInstance: shutting down (command: 33)
[Thr 01] JControlMainLoop: execute bootstrap process (step 0)
[Thr 01] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 01] [Node: bootstrap] java home is set by profile parameter
Java Home: /usr/java14_64
[Thr 01] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/BW2/SYS/exe/run/jvmx.jar
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> node execute : yes
-> java path : /usr/java14_64
-> java parameters : -Djco.jarm=1 -Xj9
-> java vm version : J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20070510a (JIT enabled)
-> java vm vendor : IBM J9 VM (IBM Corporation)
-> java vm type : server
-> java vm cpu : ppc64
-> heap size : 512M
-> root path : /usr/sap/BW2/DVEBMGS01/j2ee/cluster
-> class path : ./bootstrap/launcher.jar
-> OS libs path : /usr/sap/BW2/DVEBMGS01/j2ee/os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/BW2/SYS/exe/run/jstartup.jar:/usr/sap/BW2/SYS/exe/run/jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0144519
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = /usr/sap/BW2/DVEBMGS01/exe/jlaunch
-> arg[00] = /usr/sap/BW2/DVEBMGS01/exe/jlaunch
-> arg[01] = pf=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[02] = -DSAPINFO=BW2_01_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=/usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
-> arg[05] = -syncSem=2097258
-> arg[06] = -nodeName=bootstrap
-> arg[07] = -jvmOutFile=/usr/sap/BW2/DVEBMGS01/work/jvm_bootstrap.out
-> arg[08] = -stdOutFile=/usr/sap/BW2/DVEBMGS01/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/BW2/DVEBMGS01/work/dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=60329
-> arg[14] = -DSAPSYSTEM=01
-> arg[15] = -DSAPSYSTEMNAME=BW2
-> arg[16] = -DSAPMYNAME=p570vc11_BW2_01
-> arg[17] = -DSAPPROFILE=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/SYS/exe/run:/oracle/client/10x_64/instantclient:/usr/sap/BW2/DVEBMGS01/exe::/usr/lib:/usr/sap/BW2/DVEBMGS01/j2ee/os_libs:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/lib:/lib:/usr/sap/BW2/SYS/exe/run:/oracle/client/10x_64/instantclient
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/BW2/DVEBMGS01/j2ee/os_libs:/oracle/BW2/102_64/bin:/usr/java14_64/bin:.:/home/bw2adm:/usr/sap/BW2/SYS/exe/run::/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14/jre/bin:/usr/java14/bin
[Thr 01] JStartupICreateProcess: fork process (pid 679950)
[Thr 01] Wed Oct 22 09:26:11 2008
[Thr 01] JControlExecuteBootstrap: read instance values after global bootstrap
[Thr 01] *** WARNING => INFO: Unknown property [instance.box.number=BW2DVEBMGS01p570vc11] [jstartxx_mt. 841]
[Thr 01] *** WARNING => INFO: Unknown property [instance.en.host=bw2scs] [jstartxx_mt. 841]
[Thr 01] *** WARNING => INFO: Unknown property [instance.en.port=3250] [jstartxx_mt. 841]
[Thr 01] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx_mt. 841]
JStartupReadInstanceProperties: read instance properties [/usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties:/usr/sap/BW2/DVEBMGS01/SDM/program/config/sdm_jstartup.properties]
-> ms host : bw2scs
-> ms port : 3950
-> OS libs : /usr/sap/BW2/DVEBMGS01/j2ee/os_libs
-> Admin URL :
-> run mode : safe
-> run action : UPGRADE
-> enabled : yes
[Thr 01] JControlExecuteBootstrap: enumerate the nodes after global bootstrap
Used property files
-> files [00] : /usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
-> files [01] : /usr/sap/BW2/DVEBMGS01/SDM/program/config/sdm_jstartup.properties
Instance properties
-> ms host : bw2scs
-> ms port : 3950
-> os libs : /usr/sap/BW2/DVEBMGS01/j2ee/os_libs
-> admin URL :
-> run mode : safe
-> run action : UPGRADE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : /usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
-> [01] bootstrap_ID14451900 : /usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
-> [02] bootstrap_ID14451950 : /usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
Worker nodes
-> [00] ID14451900 : /usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
-> [01] ID14451950 : /usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
-> [02] sdm : /usr/sap/BW2/DVEBMGS01/SDM/program/config/sdm_jstartup.properties
[Thr 01] Check run mode
[Thr 01] JControlIBuildProcessList: Maximum error count is set to 4
[Thr 01] [Node: dispatcher] java home is set by profile parameter
Java Home: /usr/java14_64
[Thr 01] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/BW2/SYS/exe/run/jvmx.jar
JStartupIReadSection: read node properties [ID14451900]
-> node name : dispatcher
-> node type : dispatcher
-> node execute : yes
-> jlaunch parameters :
-> java path : /usr/java14_64
-> java parameters : -verbose:gc -Djava.security.policy=.\java.policy -Djava.security.egd=file:/dev/urandom -Djco.jarm=1 -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
-> java vm version : J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20070510a (JIT enabled)
-> java vm vendor : IBM J9 VM (IBM Corporation)
-> java vm type : server
-> java vm cpu : ppc64
-> heap size : 170M
-> init heap size : 170M
-> root path : /usr/sap/BW2/DVEBMGS01/j2ee/cluster/dispatcher
-> class path : ./bin/boot/boot.jar:./bin/system/bytecode.jar:.
-> OS libs path : /usr/sap/BW2/DVEBMGS01/j2ee/os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/BW2/SYS/exe/run/jstartup.jar:/usr/sap/BW2/SYS/exe/run/jvmx.jar
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
[Thr 01] [Node: server0] java home is set by profile parameter
Java Home: /usr/java14_64
[Thr 01] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/BW2/SYS/exe/run/jvmx.jar
JStartupIReadSection: read node properties [ID14451950]
-> node name : server0
-> node type : server
-> node execute : yes
-> jlaunch parameters :
-> java path : /usr/java14_64
-> java parameters : -verbose:gc -Djco.jarm=1 -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -verbose:gc -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
-> java vm version : J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20070510a (JIT enabled)
-> java vm vendor : IBM J9 VM (IBM Corporation)
-> java vm type : server
-> java vm cpu : ppc64
-> heap size : 2048M
-> init heap size : 2048M
-> root path : /usr/sap/BW2/DVEBMGS01/j2ee/cluster/server0
-> class path : ./bin/boot/boot.jar:./bin/boot/jaas.jar:./bin/system/bytecode.jar:.
-> OS libs path : /usr/sap/BW2/DVEBMGS01/j2ee/os_libs
-> main class : com.sap.engine.boot.Start
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/BW2/SYS/exe/run/jstartup.jar:/usr/sap/BW2/SYS/exe/run/jvmx.jar
-> parameters :
-> debuggable : no
-> debug mode : no
-> debug port : 50121
-> shutdown timeout : 120000
[Thr 01] INFO: Invalid property value [Debbugable=yes]
[Thr 01] [Node: SDM] java home is set by profile parameter
Java Home: /usr/java14_64
[Thr 01] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/BW2/SYS/exe/run/jvmx.jar
JStartupIReadSection: read node properties [sdm]
-> node name : SDM
-> node type : sdm
-> node execute : yes
-> java path : /usr/java14_64
-> java parameters :
-> java vm version : J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20070510a (JIT enabled)
-> java vm vendor : IBM J9 VM (IBM Corporation)
-> java vm type : server
-> java vm cpu : ppc64
-> heap size : 256M
-> root path : /usr/sap/BW2/DVEBMGS01/SDM/program
-> class path : /usr/sap/BW2/DVEBMGS01/SDM/program/bin/SDM.jar
-> OS libs path : /usr/sap/BW2/DVEBMGS01/j2ee/os_libs
-> main class : SDMInternal
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/BW2/SYS/exe/run/jstartup.jar:/usr/sap/BW2/SYS/exe/run/jvmx.jar
-> shutdown class : com.sap.sdm.jstartup.shutdown.InternalShutDown
-> parameters : server sdmhome=/usr/sap/BW2/DVEBMGS01/SDM/program
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
[Thr 01] JControlMainLoop: execute bootstrap process (step 1)
[Thr 01] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID14451900]
[Thr 01] [Node: dispatcher bootstrap] java home is set by profile parameter
Java Home: /usr/java14_64
[Thr 01] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/BW2/SYS/exe/run/jvmx.jar
JStartupIReadSection: read node properties [bootstrap_ID14451900]
-> node name : dispatcher bootstrap
-> node type : bootstrap
-> node execute : yes
-> jlaunch parameters :
-> java path : /usr/java14_64
-> java parameters : -Djco.jarm=1 -Xj9
-> java vm version : J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20070510a (JIT enabled)
-> java vm vendor : IBM J9 VM (IBM Corporation)
-> java vm type : server
-> java vm cpu : ppc64
-> heap size : 256M
-> root path : /usr/sap/BW2/DVEBMGS01/j2ee/cluster
-> class path : ./bootstrap/launcher.jar
-> OS libs path : /usr/sap/BW2/DVEBMGS01/j2ee/os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/BW2/SYS/exe/run/jstartup.jar:/usr/sap/BW2/SYS/exe/run/jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID014451900
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = /usr/sap/BW2/DVEBMGS01/exe/jlaunch
-> arg[00] = /usr/sap/BW2/DVEBMGS01/exe/jlaunch
-> arg[01] = pf=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[02] = -DSAPINFO=BW2_01_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=/usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
-> arg[05] = -syncSem=2097258
-> arg[06] = -nodeName=bootstrap_ID14451900
-> arg[07] = -jvmOutFile=/usr/sap/BW2/DVEBMGS01/work/jvm_bootstrap_ID14451900.out
-> arg[08] = -stdOutFile=/usr/sap/BW2/DVEBMGS01/work/std_bootstrap_ID14451900.out
-> arg[09] = -locOutFile=/usr/sap/BW2/DVEBMGS01/work/dev_bootstrap_ID14451900
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=60329
-> arg[14] = -DSAPSYSTEM=01
-> arg[15] = -DSAPSYSTEMNAME=BW2
-> arg[16] = -DSAPMYNAME=p570vc11_BW2_01
-> arg[17] = -DSAPPROFILE=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/SYS/exe/run:/oracle/client/10x_64/instantclient:/usr/sap/BW2/DVEBMGS01/exe::/usr/lib:/usr/sap/BW2/DVEBMGS01/j2ee/os_libs:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/lib:/lib:/usr/sap/BW2/SYS/exe/run:/oracle/client/10x_64/instantclient
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/BW2/DVEBMGS01/j2ee/os_libs:/oracle/BW2/102_64/bin:/usr/java14_64/bin:.:/home/bw2adm:/usr/sap/BW2/SYS/exe/run::/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14/jre/bin:/usr/java14/bin
[Thr 01] JStartupICreateProcess: fork process (pid 679952)
[Thr 01] Wed Oct 22 09:26:19 2008
[Thr 01] JControlExecuteBootstrap: execute bootstrap process [bootstrap_ID14451950]
[Thr 01] [Node: server0 bootstrap] java home is set by profile parameter
Java Home: /usr/java14_64
[Thr 01] JStartupICheckFrameworkPackage: can't find framework package /usr/sap/BW2/SYS/exe/run/jvmx.jar
JStartupIReadSection: read node properties [bootstrap_ID14451950]
-> node name : server0 bootstrap
-> node type : bootstrap
-> node execute : yes
-> jlaunch parameters :
-> java path : /usr/java14_64
-> java parameters : -Djco.jarm=1 -Xj9
-> java vm version : J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20070510a (JIT enabled)
-> java vm vendor : IBM J9 VM (IBM Corporation)
-> java vm type : server
-> java vm cpu : ppc64
-> heap size : 256M
-> root path : /usr/sap/BW2/DVEBMGS01/j2ee/cluster
-> class path : ./bootstrap/launcher.jar
-> OS libs path : /usr/sap/BW2/DVEBMGS01/j2ee/os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/BW2/SYS/exe/run/jstartup.jar:/usr/sap/BW2/SYS/exe/run/jvmx.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID014451950
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout : 120000
JControlStartJLaunch: program = /usr/sap/BW2/DVEBMGS01/exe/jlaunch
-> arg[00] = /usr/sap/BW2/DVEBMGS01/exe/jlaunch
-> arg[01] = pf=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[02] = -DSAPINFO=BW2_01_bootstrap
-> arg[03] = -nodeId=-1
-> arg[04] = -file=/usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
-> arg[05] = -syncSem=2097258
-> arg[06] = -nodeName=bootstrap_ID14451950
-> arg[07] = -jvmOutFile=/usr/sap/BW2/DVEBMGS01/work/jvm_bootstrap_ID14451950.out
-> arg[08] = -stdOutFile=/usr/sap/BW2/DVEBMGS01/work/std_bootstrap_ID14451950.out
-> arg[09] = -locOutFile=/usr/sap/BW2/DVEBMGS01/work/dev_bootstrap_ID14451950
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=60329
-> arg[14] = -DSAPSYSTEM=01
-> arg[15] = -DSAPSYSTEMNAME=BW2
-> arg[16] = -DSAPMYNAME=p570vc11_BW2_01
-> arg[17] = -DSAPPROFILE=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/SYS/exe/run:/oracle/client/10x_64/instantclient:/usr/sap/BW2/DVEBMGS01/exe::/usr/lib:/usr/sap/BW2/DVEBMGS01/j2ee/os_libs:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/lib:/lib:/usr/sap/BW2/SYS/exe/run:/oracle/client/10x_64/instantclient
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/BW2/DVEBMGS01/j2ee/os_libs:/oracle/BW2/102_64/bin:/usr/java14_64/bin:.:/home/bw2adm:/usr/sap/BW2/SYS/exe/run::/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14/jre/bin:/usr/java14/bin
[Thr 01] JStartupICreateProcess: fork process (pid 679954)
[Thr 01] Wed Oct 22 09:26:26 2008
[Thr 01] JControlMainLoop: starting the processes
JControlStartJLaunch: program = /usr/sap/BW2/DVEBMGS01/exe/jlaunch
-> arg[00] = /usr/sap/BW2/DVEBMGS01/exe/jlaunch
-> arg[01] = pf=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[02] = -DSAPINFO=BW2_01_dispatcher
-> arg[03] = -nodeId=0
-> arg[04] = -file=/usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
-> arg[05] = -syncSem=2097258
-> arg[06] = -nodeName=ID14451900
-> arg[07] = -jvmOutFile=/usr/sap/BW2/DVEBMGS01/work/jvm_dispatcher.out
-> arg[08] = -stdOutFile=/usr/sap/BW2/DVEBMGS01/work/std_dispatcher.out
-> arg[09] = -locOutFile=/usr/sap/BW2/DVEBMGS01/work/dev_dispatcher
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=60329
-> arg[14] = -DSAPSYSTEM=01
-> arg[15] = -DSAPSYSTEMNAME=BW2
-> arg[16] = -DSAPMYNAME=p570vc11_BW2_01
-> arg[17] = -DSAPPROFILE=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/SYS/exe/run:/oracle/client/10x_64/instantclient:/usr/sap/BW2/DVEBMGS01/exe::/usr/lib:/usr/sap/BW2/DVEBMGS01/j2ee/os_libs:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/lib:/lib:/usr/sap/BW2/SYS/exe/run:/oracle/client/10x_64/instantclient
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/BW2/DVEBMGS01/j2ee/os_libs:/oracle/BW2/102_64/bin:/usr/java14_64/bin:.:/home/bw2adm:/usr/sap/BW2/SYS/exe/run::/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14/jre/bin:/usr/java14/bin
[Thr 01] JStartupICreateProcess: fork process (pid 679956)
[Thr 01] JControlICheckProcessList: process dispatcher started (PID:679956)
JControlStartJLaunch: program = /usr/sap/BW2/DVEBMGS01/exe/jlaunch
-> arg[00] = /usr/sap/BW2/DVEBMGS01/exe/jlaunch
-> arg[01] = pf=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[02] = -DSAPINFO=BW2_01_server
-> arg[03] = -nodeId=1
-> arg[04] = -file=/usr/sap/BW2/DVEBMGS01/j2ee/cluster/instance.properties
-> arg[05] = -syncSem=2097258
-> arg[06] = -nodeName=ID14451950
-> arg[07] = -jvmOutFile=/usr/sap/BW2/DVEBMGS01/work/jvm_server0.out
-> arg[08] = -stdOutFile=/usr/sap/BW2/DVEBMGS01/work/std_server0.out
-> arg[09] = -locOutFile=/usr/sap/BW2/DVEBMGS01/work/dev_server0
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=60329
-> arg[14] = -DSAPSYSTEM=01
-> arg[15] = -DSAPSYSTEMNAME=BW2
-> arg[16] = -DSAPMYNAME=p570vc11_BW2_01
-> arg[17] = -DSAPPROFILE=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/SYS/exe/run:/oracle/client/10x_64/instantclient:/usr/sap/BW2/DVEBMGS01/exe::/usr/lib:/usr/sap/BW2/DVEBMGS01/j2ee/os_libs:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/lib:/lib:/usr/sap/BW2/SYS/exe/run:/oracle/client/10x_64/instantclient
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/BW2/DVEBMGS01/j2ee/os_libs:/oracle/BW2/102_64/bin:/usr/java14_64/bin:.:/home/bw2adm:/usr/sap/BW2/SYS/exe/run::/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14/jre/bin:/usr/java14/bin
[Thr 01] JStartupICreateProcess: fork process (pid 442380)
[Thr 01] JControlICheckProcessList: process server0 started (PID:442380)
JControlStartJLaunch: program = /usr/sap/BW2/DVEBMGS01/exe/jlaunch
-> arg[00] = /usr/sap/BW2/DVEBMGS01/exe/jlaunch
-> arg[01] = pf=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[02] = -DSAPINFO=BW2_01_sdm
-> arg[03] = -nodeId=2
-> arg[04] = -file=/usr/sap/BW2/DVEBMGS01/SDM/program/config/sdm_jstartup.properties
-> arg[05] = -syncSem=2097258
-> arg[06] = -nodeName=sdm
-> arg[07] = -jvmOutFile=/usr/sap/BW2/DVEBMGS01/work/jvm_sdm.out
-> arg[08] = -stdOutFile=/usr/sap/BW2/DVEBMGS01/work/std_sdm.out
-> arg[09] = -locOutFile=/usr/sap/BW2/DVEBMGS01/work/dev_sdm
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=60329
-> arg[14] = -DSAPSYSTEM=01
-> arg[15] = -DSAPSYSTEMNAME=BW2
-> arg[16] = -DSAPMYNAME=p570vc11_BW2_01
-> arg[17] = -DSAPPROFILE=/usr/sap/BW2/SYS/profile/BW2_DVEBMGS01_p570vc11
-> arg[18] = -DFRFC_FALLBACK=ON
-> arg[19] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/SYS/exe/run:/oracle/client/10x_64/instantclient:/usr/sap/BW2/DVEBMGS01/exe::/usr/lib:/usr/sap/BW2/DVEBMGS01/j2ee/os_libs:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/sap/BW2/DVEBMGS01/exe:/usr/lib:/lib:/usr/sap/BW2/SYS/exe/run:/oracle/client/10x_64/instantclient
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/BW2/DVEBMGS01/j2ee/os_libs:/oracle/BW2/102_64/bin:/usr/java14_64/bin:.:/home/bw2adm:/usr/sap/BW2/SYS/exe/run::/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/java14/jre/bin:/usr/java14/bin
[Thr 01] JStartupICreateProcess: fork process (pid 819438)
[Thr 01] JControlICheckProcessList: process SDM started (PID:819438)
log_bootstrap_ID0144519.0.log
[Oct 22, 2008 9:26:07 AM ] --------------------------------------------------
[Oct 22, 2008 9:26:07 AM ] Bootstrap MODE:
[Oct 22, 2008 9:26:07 AM ] <INSTANCE GLOBALS>
[Oct 22, 2008 9:26:07 AM ] determined by parameter [ID0144519].
[Oct 22, 2008 9:26:07 AM ] --------------------------------------------------
[Oct 22, 2008 9:26:10 AM ] Instance [ID144519] will run in [safe] mode, performing action [UPGRADE]
[Oct 22, 2008 9:26:10 AM ] Safe mode lock is imposed by instance [ID144519] - only server [ID14451950] and dispatcher [ID14451900] will be started locally.
[Oct 22, 2008 9:26:10 AM ] Discovered property [instance.en.port] with value [3250] !
[Oct 22, 2008 9:26:10 AM ] Discovered property [instance.en.host] with value [bw2scs] !
[Oct 22, 2008 9:26:10 AM ] Synchronizing file [./.hotspot_compiler].
[Oct 22, 2008 9:26:10 AM ] ...Synched ok!
[Oct 22, 2008 9:26:10 AM ] Synchronizing file [../../SDM/program/.hotspot_compiler].
[Oct 22, 2008 9:26:10 AM ] ...Synched ok!
[Oct 22, 2008 9:26:10 AM ] Synch time: 2838 ms
imho all is ok, or?
the log of JSPM...
#1.5 #C000AC10822100000000044957175717000459D3082E8A90#1224662817082#/System/Server/Upgrade/JSPM##com.sap.sdt.j700.startupfrmw.J2EEClusterController700#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j700.startupfrmw.J2EEClusterController700#Java###A dispatcher is running on instance {0}.#1#JC_p570vc11_BW2_01 #
#1.5 #C000AC10822100000000044A57175717000459D3082E8E78#1224662817083#/System/Server/Upgrade/JSPM##com.sap.sdt.j700.startupfrmw.J2EEClusterController700#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j700.startupfrmw.J2EEClusterController700#Java###A server is running on instance {0}.#1#JC_p570vc11_BW2_01 #
#1.5 #C000AC10822100000000044B57175717000459D3082E9260#1224662817084#/System/Server/Upgrade/JSPM##com.sap.sdt.j700.startupfrmw.J2EEClusterController700#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j700.startupfrmw.J2EEClusterController700#Java###Cluster has not been started. Waiting for another {0} seconds...#1#10#
JCMon
SAP System Name : BW2
SAP System : 01
MS Host : bw2scs
MS Port : 3950
Process Count : 3
PID of JControl : 639054
State of JControl : All processes running
State inside MS : All processes running
Admin URL :
|Idx|Name |PID |State |Error|Restart|
|---|-------------------|--------|---------------------|-----|-------|
| 0|dispatcher | 794676|Running | 0|yes |
| 1|server0 | 696554|Running | 0|yes |
| 2|SDM | 450724|Running | 0|yes |
for what he is waiting?
Edited by: Christian F. on Oct 27, 2008 3:39 PM -
Hi!
I installed JES2005Q1 AppServer 8.1 and wanted to create a cluster. But:
bash-3.00# ./asadmin create-cluster
CLI001 Invalid Command, create-cluster. Use "asadmin help" for a list of valid commands.
create-cluster is not a valid command. Also commands concerning node agents are missing.
I did not install Pointbase & Samples, might this be the cause for this?
Also in the administration web interface "Clusters", "Node Agents" and "Stand-Alone Instances" are missing in the tree.
thx for any ideas,
ChrisOk, found it. It was simply the Standard Edition installed, not the Enterprise Edition...
-
I tried creating a small cluster for distributed processing, following the guidelines of this article:
http://www.macworld.com/article/49047/2006/01/marcchreateside.html
When I get to Step 5, and submit the batch in Compressor, I open up the pulldown menu to select the cluster I've made. The only one that appears is "This Computer." Everything else in that article up to this point worked just fine. Any ideas?When I click start sharing, it changes to Stop Sharing, and the idle Qmaster icon appears in my upper toolbar, so I'm sure it works. My machines can also see each other in the Qadministrator list.
Sometimes when I create a new cluster in Qadministrator, the program acts up a bit and creates two clusters with the same name, then all the other machines disappear from the network and I have to reset the Qmaster services as you described.
Still, when creating a cluster works, I should be able to select it in Compressor when submitting a batch.
I've also tried trashing my preferences and repairing disk permissions, but no luck. -
Cannot see cluster disk resources after updating Windows base MP
Hello - we've recently updated the Windows base MP for SCOM 2007 R2. Once we did that we lost monitoring of our clustered disk resources. They're discovered but not monitored any more. Can someone please help!!! TIA
Mike ZamboriniHi,
From the "Windows Server Operating System Management Pack Guide.docx" - page 42
Known Issue: Cluster Disks Managed by Third-Party Software are Not Monitored
Issue: If the Cluster disks are managed by third party software, and they change the resource type to anything other than “Physical Disk”, these disks will be discovered but we do not provide monitoring for these.
Workaround: There is no workaround currently available. In future, we will be removing discovery for these too.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Cannot destroy my flex session using FlexSessionListener
Hi all,
I have what I thought was a simple need: destroy a session once a user logs out of my application either via a logout button or by closing the browser.
I have implemented the body ... onunload="disconnectAll()" .. method which I found numerous examples of on the net and have my logout button call the same disconnectAll() upon click.
All this is good and my FlexSessionListener sessionDestroyed() gets called. However, I can see from my logs that a sessionCreated() also gets called straight after the call to sessionDestroyed!
Has anybody seen this or have any idea why this is happening?
Are there threads running or feeds from clients that are keeping my session alive through recreating another one?
Any help would be greatly appreciated!I'm in the same boat. Using the latest version (8.0.12 build 25282). Can not connect to the console session on either OSX 10.9.5 or 10.10.1. This did indeed work previously.
Looked at the "Send log" output and find multiple instances of this:
[2014-Dec-01 14:53:53] RDP (0): Final rdp configuration used: screen mode id:i:0
desktopwidth:i:1920
desktopheight:i:1200
use multimon:i:1
session bpp:i:24
full address:s:guy
audiomode:i:0
username:s:juan
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:1
gatewayusagemethod:i:0
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop comredirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
The important part seems to be "connect to console:i:1". That seems to indicate that an integer value is set to 1 (True?).
Running "qwinsta" on the remote server show:
Microsoft Windows [Version 5.2.3790](C) Copyright 1985-2003 Microsoft Corp.
C:\Documents and Settings\juan>qwinsta
SESSIONNAME USERNAME ID STATE TYPE DEVICE
console 0 Conn wdcon
rdp-tcp 65536 Listen rdpwd
>rdp-tcp#452 juan 1 Active rdpwd
juan 3 Disc rdpwd
C:\Documents and Settings\juan>
Clearly, I'm not connected to the console.
Is there anything else that can be provided or checked? -
Destroying/Re-creating a Failover Cluster - Server 2012
Hi all,
Some background:
We have a 4-node cluster hosting our Hyper-V environment, and for some or other reason we keep having issues where nodes will just become unresponsive, with the logs indicating an issue on the cluster.
Short of destroying the cluster, we've tried everything to resolve this, i.e. remove and re-install Hyper-V and Failover Clustering, checked Windows updates, double-checked the configuration on the hardware, etc.
Now, my question:
If I destroy a cluster through cluster manager, and then re-create it, adding back the CSV storage, will the "new" cluster pick up that there are Hyper-V servers in those CSVs and recover those roles? Is there a way to back up and restore the existing
roles prior to destroying the cluster?
Thanks in advance for any guidance.
SebastianHi,
Base on my experience, if you want to remove the cluster you must remove all the cluster resource first, for Hyper-V roles you must export all the vm to the new location then
do the cluster remove action.
The similar thread:
Does the destroy cluster option affect the guests running on the hyper-v hosts?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/aab6d54c-1220-42fb-b4f6-c0b6b1583730/does-the-destroy-cluster-option-affect-the-guests-running-on-the-hyperv-hosts?forum=winserverhyperv
More information:
Deleting a Cluster resource? Do it the supported way
http://blogs.technet.com/b/askcore/archive/2010/01/11/deleting-a-cluster-resource-do-it-the-supported-way.aspx
Remove-Cluster
http://technet.microsoft.com/en-us/library/hh847273.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to manage windows cluster on windows server 2008 R2
Hi I want to know how to properly shutdown or stop windows cluster with out failover or failing it.
I have successfully created windows cluster on win 2008 R2 sp1 using vmware with starwind software for SAN storage.
Now when I shut down or stop cluster service on node1 it failsover and shows critical errors fine.ok... I tried to destroy and clean up cluster using cmd commands.Forcecleanup both nodes with cmd commands.it was successful.
Later I recreated san storage with target and initiator configuration using starwind without any issue.
I Reinstalled FC service on both the nodes restarted vmnodes.I cheked all the firewall were disable.and machines able to ping well..
Now when I tried to recreate new cluster it fails and gives different errors.AS Node1 was evicted from cluster,Another was Quoram was lost as no witness disk was found.
Also It did not show my cluster under FCM on Node2.I tried to add node Node2 but error saying Node2 is already in a cluster.
So I want to know how to manage windows cluster properly and manage it entries in active directory so that even after shutting/stopping the service/destroying cluster I do not need to do all over again.
I had to recreate all VMware from start and do AD setup and SAN storage again then only windows cluster got successfully created once again....................
I had to recreate all vmware nodes with FC sevice reinstalled and also recreate AD DS and DNS.
srm_2010Hi srm_2010,
You can refer the following KB:
Start or Stop the Cluster Service on a Cluster Node
http://technet.microsoft.com/en-us/library/cc771742.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Maybe you are looking for
-
CS4 Master Collection partial inoperability
Half of applications from CS4(acrobat, illustrator, fireworks, indesign etc.) crashes when i'm trying to run it on my pc. I have Vista 64x.
-
"user not authenticated" in Africa
My missionary friend has an email account set up with africaonline, the service provider in Ghana. When he is at the africaonline office he can send and receive email fine. However, when he attempts to send email from any other location he gets a "us
-
IE and ActiveX solution - Page conversion tool for Flash
To all Web Developers, We have written a handy web based tool to automatically convert your web pages so they no longer display "Click To Activate And Use This Control" over Flash content. Please visit http://www.microsoft-activex-solutions.co.uk We
-
Making a blackberry web page for my business
Can I make a blackberry web page for my business off of my 8330 or do I have to use a desk top version of the internet to make a web page? I would really like it if all things that are capable on a desk top were allso capable on my 8330.If anyone kno
-
DW8 slow on Mac OS X. Any remedy?
I've got a G5 single processor 1.8, 2GB SDRAM which is pretty OK. All apps are working quite well and as fast as one can expect. But DW (both 2004 and 8.0.2 which use now) has always been a major PITA. More or less each and every command takes 2-4 se