Cannot enable 5.1 playback for stero sources (itunes etc) - Audig

So when I first got this card, when I played music thru itunes it would play through all 6 speakers (I have a kilpsch ultra 5. setup).
I had to reformat so I download the drivers from Creative's website (which didn't include all the programs the orig disc did) and since then when I play music it only plays thru the front two speakers and the sub. when I play a dvd it uses all 6 speakers as it should.
I uninstalled the drivers, used my origional install disc and resintalled all drivers and applications. Now no matter what setting I have enabled, I cannot hear my mp3s on the rear two sepakers. My Current Settings:?Creative speaker settings - Speaker Selection - 5. SpeakersEAX - CMSS 3D tab - I have the "Enable CMSS 3D" box checked, and the current CMSS option (out of 3)??is CMSS (Classic 3D upmix effect....). I have tried all three settings and none of them allow me to??hear

Hi,
did you, or anyone else managed to fix this?
I've got the exact same problem. I recently re-insalled xp pro (sp2, previously sp), installed the latest drivers (02.09.006) and now the CMSS option does *nothing*. CMSS2 seems to work (but I'm not quite sure what that does anyway). Non-stereo sources such as games work fine, and I know there's nothing wrong with my speaker system.
It's not a massi've problem for me (my logitech's have a hardware stereo->5. upmixer), but I'd like to know why this isn't working anymore.
I tried regressing the drivers back, but that didn't work?
anyone any suggestions?
cheers!

Similar Messages

"Enable distribution-point sharing for this source site" did not showing SCCM 2007 DPs as SCCM 2012 content shares for CM12 clients

Hi
We have one central site server and three primary site servers in SCCM 2007 and completed the SCCM 2012 migration as single hierarchy.
During the migration, We have configured SCCM 2007 Central site server as source hierarchy for data gathering process and configured the "Enable distribution-point sharing for this source site" to make SCCM 2007 distribution points
as SCCM 2012 content shares to serve SCCM 2012 migrated clients. Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this
source site" but data gathering process is completing successfully.
Is anyone have idea, why these SCCM 2007 DPs did not appearing as SCCM 2012 content shares under "Shared Distribution Points"
Thanks in Advance
srkr

Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this source
site" but data gathering process is completing successfully.
Earlier all the shared DPs are showing under Shared Distribution Points ? Or since starting itself these DPs are not showing down? Have you checked migmctrl.log for some clue?
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

P1102w cannot enable "HP WEB SERVICES" for sprintConnection error" check

I have a new printer which works fine for wifi printing but I'd like to use web printing which I beleive is called eprint.
I printed the configuration page and my firmware is 20120814
I cannot see were my printers email address is.
I navigated to the printers url and clicked on the tab "hp web services" and clicked on the green button enable but I keep getting the following error message.
"connection error: check internet connection"
From the router I can see that both the laptop and printer are on the same network 192.168.0.??
Can you please advise I suspect I have a fault on the printer but cannot be certain what can I do, I have updated the software on my mac which is running mavericks 10.9.2 , I've even hit the update software and there is no further updates available whch should mean I have the latest software and firmware for the printer.
Please advise how I may overcome the error when there clearly is no network issue as I can get to the printer to print and go to its web pages without any issues at all?

Hi paz_egap,
Thank you for the thorough response, I appreciate it.
Since you have set a static ip with manual DNS servers and you are still cannot enabled the web services is the firmware up-to-date on the printer. Please follow the steps in Getting the Firmware and Product Updates. Once the firmware is current and the printer still has its manual ip address and manual DNS servers you should be okay to enabled the web services on the printer.
If you are still having an issue after completing the above please call HP’s Cloud Services at 1-855-785-2777 if you live in the USA/Canada region. If you live outside the USA/Canada region please click here to find the Technical Support number for your country/region.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

I am trying to log in to face time with my normal apple ID but it keeps telling me that it cannot log in yet it works fine with itunes etc? any suggestions

I am having trouble loging in to FAcetime with my normal apple ID, it says its not connected but the id works with itunes etc. any suggestions???

I seem to be having the same issue, however, no browser has worked for me.
I have tried on my windows pc, Firefox, IE, Chrome and Safari. As well as using the command prompt to force open the link with this command: iTunes.exe /url "itmss://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/longUrlHandler?cacheK ey=MZFinancelinkAccountPageb95c64b3df2e3a30a8d94ee87dbeb12f&ign-mscache=1&ign-ms r=http%3A%2F%2Fwww.disneymoviesanywhere.com%2Fsetting%2Faccount%2Fsync-account%2 F"
When this all failed I went to my parent's iMac and logged into my itunes account there and used Safari on their machine but I got an error saying that the itunes store wasn't avaliable. I authorized that computer as well.
I'm at wits end here. I really just want to make this work
Edit: Thae farthest I have gotten it to go is to open itunes. It loads to the store then just does nothing. No prompt to link accounts.

I am trying to set up iCloud and it keeps coming back and saying "This apple ID's email address cannot be Verified. It is my main iTunes address and password. What is wrong?

Hi,
I am trying to set up iCloud on my various devices. When I log in with my iTunes (Apple id) it keeps coming back and stating
"Verify your account. This Apple ID's email address cannot be verified. Change your apple ids email address at appleid.apple.com to sig into i cloud"
My apple id has been alive and in use for years on iTunes etc. I have tried a different address and password and still get the same result
Help???
Regards
Brian

If your email address is valid, just go to https://appleid.apple.com/, click "Manage your account" to the right,sign in, click Name, ID, and Email Addresses to the left, then click "Verify now" next to your email address. Apple will send you an email to this address with a verification link. Otherwise add an alternate email address that can be verified.

Lync monitoring Details reports are not getting opened, Getting SQL error like "Cannot impersonate user for data source 'CDRDB"

Hi,
Two month before, We have deployed Lync 13 set up with lync monitoring and archiving service enabled. After configuring we have the Lync monitoring and archiving services are working fine... few weeks back I have changed the Admin Password
of the Lync Setup. After that Lync Monitoring and Archiving services are not working.
when I try open Lync monitoring service from web UI,
http://localhost/ReportServer_LyncMonitoring/
Web UI is opening but Reports home page is not Accessible , Getting error Like
"An error has occurred during report processing. (rsProcessingAborted)
Cannot impersonate user for data source 'CDRDB'. (rsErrorImpersonatingUser)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect"
Please help me to trouble shoot this problem.
Thanks,
Rajarajan.D

Hi Rajarajan.D
You probably need to update the password against the CDRDB datasource in SSRS Report manager, take a look at this article: http://lyncme.co.uk/microsoft-lync-server-2013/cannot-impersonate-user-for-data-source-cdrdb-rserrorimpersonatinguser-error/
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code

I get this message when I check the Device manager for my Ipod
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipod

I reinstalled Itunes a couple of times. I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems. I have a yellow causion lite when I look at the USB-port with the phone connected. All other devices work without a problem.

Cannot impersonate user for data source 'SMSDB'. --- Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Log on failed. ---

After Upgrading from SCCM 2012 Sp1 to SCCM 2012 R2 we are getting following error:
System.Web.Services.Protocols.SoapException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException:
Cannot impersonate user for data source 'SMSDB'. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Log on failed. ---> System.Runtime.InteraopServices.COMException: The referenced account is currently locked out and may not
be logged on to. (Exception from HRESULT: 0x80070775)
   at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
   at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Microsoft.ConfigurationManagement.ManagementProvider.SmsException
An error has occurred during report processing.
Stack Trace:
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
System.Web.Services.Protocols.SoapException
System.Web.Services.Protocols.SoapException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException:
Cannot impersonate user for data source 'SMSDB'. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Log on failed. ---> System.Runtime.InteropServices.COMException: The referenced account is currently locked out and may not
be logged on to. (Exception from HRESULT: 0x80070775)
   at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
   at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Stack Trace:
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)

HI,
Check the SQL Reporting services account that is used, the one that you supplied when setting up the SQL Reporting Services point in the Configuration Manager 2012 console, it seems to be locked out.
I believe it has been asked once before on the forums as well.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Cannot enable "Updates for other Microsoft products" on WSUS client

i cannot enable the checkbox "Give me updates for other Microsoft products when I update Windows" ("Microsoft update" instead of "Windows update"). If I enable it and press ok, the GUI stalls a bit and the check is removed.
Installing updates from the wsus server works. The client is a 2012 R2 install.
From Windows updatelogs, it is clear the client attempt to connect to <HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=521&L=en-US&P=&PT=0x7&WUA=7.9.9600.17404> when I try to enable
Microsoft update
This is not allowed by firewall/proxy, so this obviously fails.This server is located in a secured vlan and should not have access to internet in any way. I suppose client should fetch the .cab from wsus?
2014-12-17 14:44:45:376 836 137c AU ########### AU: Setting new AU options ###########
2014-12-17 14:44:45:376 836 137c AU # Policy changed, AU refresh required = No
2014-12-17 14:44:45:376 836 137c AU # Policy Driven Provider: https://wsusserver.mydomain.tld
2014-12-17 14:44:45:376 836 137c AU # Detection frequency: 4
2014-12-17 14:44:45:376 836 137c AU # Approval type: Pre-install notify (Policy)
2014-12-17 14:44:45:376 836 137c AU # Auto-install minor updates: No (Policy)
2014-12-17 14:44:45:376 836 137c AU AU settings changed through User Preference.
2014-12-17 14:44:45:376 836 137c AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-12-17 14:44:45:376 836 137c AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-12-17 14:44:45:392 836 137c SLS Retrieving SLS response from server...
2014-12-17 14:44:45:392 836 137c SLS Making request with URL HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=521&L=en-US&P=&PT=0x7&WUA=7.9.9600.17404
2014-12-17 14:45:07:267 836 137c Misc WARNING: Send failed with hr = 80072ee2.
2014-12-17 14:45:07:267 836 137c Misc WARNING: Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <None>
2014-12-17 14:45:07:267 836 137c Misc WARNING: Send request failed, hr:0x80072ee2
2014-12-17 14:45:07:267 836 137c Misc WARNING: WinHttp: SendRequestUsingProxy failed for <HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=521&L=en-US&P=&PT=0x7&WUA=7.9.9600.17404>. error 0x80072ee2
2014-12-17 14:45:07:267 836 137c Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
2014-12-17 14:45:07:267 836 137c Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
2014-12-17 14:45:07:267 836 137c Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
2014-12-17 14:45:07:267 836 137c SLS FATAL: SLS:CSLSDownloader::GetUrlContent: DoFileDownload failed with 0x80072ee2
I can set the cab path myself if I use
vbscript to register the microsoft update service, but I don't know which cab url I should use for this.
I've used the same install image before, but I think all servers had access to internet (via proxy) when doing the first windowsupdate. this is no longer allowed. the image is an MDT installation image that attempt to enable the Microsoft update setting
with vbs as described in link above.
Please advice how to resolve this issue.
MCP/MCSA/MCTS/MCITP

I was not aware if that, thanks! Is this documented somewhere?
Well, no, not really. Presumably there is no need to do so. The two environments use completely different classification methodologies which have almost zero relationship to one another.
The issue is this is checked for in the server security audit, all servers have this setting, but this one hasn't. I will need to be able to motivate/proof this point to our security department.
I would say your security department maybe needs to do some of their own self-education on how Microsoft's patch management system has worked for the past twenty years, and more recently, how it has worked with SUS/WSUS for the past eleven years. This is not
new stuff! :-)
Also odd is that on this server I only have one service in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RequestedAppCategories.
Don't really know much about what's in the ~\CurrentVersion\WindowsUpdate key either as it's also irrelevant to the WSUS environment.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Premiere CC - cannot enable Mercury Playback Engine, GeForce GTX 470

Yep, I cannot enable it. The option is greyed out. The card was fine with CS5, CS5.5, and CS6. As soon as I upgraded to CC...boom...no Cuda. Sucks! Any suggestions?

Okay, I installed the latest Windows approved driver from device mgr and we're back in business. I was holding onto that driver for as long as I could! Let's pray this driver is stable and won't cause me grief.

Cannot enable Mercury Playback Engine GPU Acceleration

Cannot enable Mercury Playback Engine GPU Acceleration.
Just bought a Asus GeForce GTX 560 Ti just so that I can use the graphics acceleration on Adobe Premiere Pro CS5.
Followed every step in most tutorials such as this great one http://vimeo.com/13440307 and yet the Mercury Playback Engine GPU Acceleration option is still faded out.
http://www.urbanistgame.com/wp-content/uploads/2012/06/Cuda-supported.gifAdded the last two lines as wasn't sure if it required "Ti" it only came up as "supported" in the cmd after the "Ti" so I'm guess that's what it required.
You can see in bold I've set the Multi-display/mixed-GPU acceleration option to "Compatibility performance mode"
   Splash screen confirms Version as 5.0.3 (update to enable Mercury Playback Engine GPU Acceleration).
After all that the "Video Rendering and Playback" option is still faded out.
Any ideas? System Information
List of installed Nvidia programs
Hope someone can help.

PROBLEM SOLVED.
I reinstalled CS5 on the bookdisk and it worked fine. Spent 9 hours trying everything else its really was the only thing left and the last thing I wanted to do.
Results:
Rendering a 32min clip with Gaussian Blur effect
Before CUDA it took 4 hours and hence my move to purchase a CUDA card.
After CUDA 23mins! using Encoder
Question:
I noticed that the GPU is not stressing that much still. Only running at 30% activity???

CS5: Green Pixelated Video in Source Monitor playback for clips w/ 44100 hz - Compressed - Stereo

I am having issues with 2 of the 14 clips I have imported into a new project. I am using Adobe Premiere Pro CS5. -- I have enclosed the properties of a few clips + a screen shot
The two clips giving me issue differ from the other clips the following way:
44100 hz - compressed - stereo
the other 12 clips were encoded with the following and they play back properly in the source monitor/sequence
44100 hz - 16-bit -stereo
Here are the full properties of the bad clip(s)
OBvid11.mov
Type: MPEG Movie
File Size: 513.3 MB
Image Size: 1920 x 1080
Pixel Depth: 32
Frame Rate: 24.00
Source Audio Format: 44100 Hz - compressed - Stereo
Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
Total Duration: 00:04:44:18
Average Data Rate: 1.8 MB / second
Pixel Aspect Ratio: 1.0
Here are the properties of a good clip - you see it shows way more information
OBvid10.mov
Type: QuickTime Movie
File Size: 5.2 MB
Image Size: 1920 x 1080
Pixel Depth: 24
Frame Rate: 24.00
Source Audio Format: 44100 Hz - 16 bit - Stereo
Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
Total Duration: 00:00:02:17
Average Data Rate: 1.9 MB / second
Pixel Aspect Ratio: 1.0
QuickTime Details:
Movie contains 1 video track(s), 1 audio track(s) and 0 timecode track(s).
Video:
There are 64 frames with a duration of 1837/44100ths.
Video track 1:
Duration is
Average frame rate is 0.01 fps
Video track 1 contains 1 type(s) of video data:
Video data block #1:
Frame Size = 1920 x 1080
Compressor = H.264
Quality = Normal (3.00)
Temporal = Normal (3.00)
Audio:
Audio track 1 contains 1 type(s) of audio data:
Audio data block #1:
Format = 16 bit - Stereo
Rate = 44100 Hz
Compressor = 16-bit Little Endian
I dont actually need the audio from any of the clips. Is there a way that I can fix this?
Thanks so much for taking the time to read this.

Thanks Ann.
Is that true for all GoPro video formats or just some of the newer (higher resolution/frame rate) one? The GoPro has several different pre-sets and I typically like to get as much resolution as possible for my source and for highspeed subjects like sports I try to use higher framerates as well. Are you suggesting that I convert the source files to Cineform avi and then edit those resulting AVI's in CS6?

CANNOT Enable TURBO MEMORY For T400

Hi there,
I am a user of Thinkpad T400. The machine came with 2G turbo memory, but I cannot enable it in the 'Intel Turbo Memory Console', any advice?
Thanks in advance.
Message Edited by hereiam436 on 08-24-2008 06:40 AM
Thinkpad T400 2768AA6

The screenshot shows the option to enable the TurboMem is blanked off. Have you tried starting the application as administrator. You then might have the option available.
Could also check what is driver version of the application.
You can check that by clicking "Help" tab followed by "About" in the Turbo Memory Console. Intel has released new driver ver 1.7. Driver ver (1.7.0.1029). I upgraded it from the Intel site, a few days ago, and it seems to work better than the previous driver.
The drivers available with Lenovo are old.
Sushil
ThinkPad T61, (7658CTO), T7500, Integrated Graphics, 320 GB HDD, 3 GB RAM, 1 GB Intel Turbo Memory, Vista (32 bit) Business

Cannot enable parental controls for Guest if FileVault enabled

FileVault is enabled on my Mac. When I subsequently enabled Find My Mac, the Guest User account was automatically enabled, as it is required for Find My Mac's theft recovery feature. When I accessed the Guest User in the Users & Groups Preferences panel, the "Enable parental controls" option for Guest User was greyed out. Thus, anyone with physical access to my computer, such as my kid, can gain unfettered access to the Internet without a password.
I did find a solution. I unchecked the "Allow guests to log in to this computer" box in the Preferences panel. This caused the "Enable parental controls" box to become checked (seems to be a bug). I then checked the "Allow guests to log in to this computer" box, which caused the "Enable parental controls" box to become unchecked. At this point, the "Enable parental controls" box was no longer greyed out, and I was able to check it.
System: Late 2014 Retina iMac with 3.5 GHz Intel Core i5, 8 GB memory, OS 10.10

Update: Although the method above appeared to enable parental controls, they do not work. When I log in as Guest (causing the computer to reboot into Safari-only mode), I am able to access a very well-known adult website (play*** dot com).

Can the audio for the source monitor be muted during playback?

Seems like a silly question but I like to listen to music on the same workstation while I'm previewing/trimming clips in the source monitor. In this instance I do not need to preview the audio in the clips so I'd rather not hear it while my jams are playing, which keeps me from poking my eye out with a pen after 4 hours of previewing .
I have not been able to locate any mute option for the source monitor so I'm open to suggestions other then using something other than the same workstation (iPod n headphones), which may be the way I go if there is no other option.
thanks,
Dave

Hey Harm,
I can't see the audio tracks in the source monitor (CS4). I only see the audio tracks of clips that are loaded in a timeline. Right now I have a thousand (literally) clips from a season of club volleyball. I have them loaded in bins in the project panel and I am dbl clicking each clip to load it in the source monitor panel (that I have undocked and displayed on a seperate monitor). I have seperate sequences for the types of plays I want to keep, so as I preview/trim in the source monitor I drop what I want to keep in the appropriate timeline/sequence. If there is a way to view the audio tracks in the source monitor without the clips being in a timeline I do not know how.

Cannot enable 5.1 playback for stero sources (itunes etc) - Audig

Similar Messages

Maybe you are looking for