Cannot enter Date & Time via Settings

After migrating to 2.1 when i try to enter date and time option via settings, i land up again on the main screen. Can anyone help me on this

I have the same problem. When I travel abroad, I leave the phone in Airplane Mode; I can't get into the Date & Time settings to adjust the time. The phone properly updates while in the US, but abroad, it occasionally takes several hours to update to the correct time.
This weekend, as the Netherlands switched off of DST, the phone plainly refused to update the time. I was unable to enter into the Date & Time page and was left with a clock that was just wrong.
When I returned to the US this evening, the phone updated to the proper time once again. It would be quite nice to be able to adjust the time manually when the phone refuses to update properly.

Similar Messages

Cannot enter data into table with column named DATE

I have a table as follows:
CREATE TABLE PACKINGLINE (
SNO VARCHAR2(13),
"DATE" DATE DEFAULT SYSDATE,
PRDORDNO VARCHAR2(12),
NOW DATE DEFAULT SYSDATE,
CONSTRAINT PACKINGLINE_PK PRIMARY KEY ("SNO", "DATE"));
Note the "cleaverly" named DATE and NOW columns (yes, that is the name of the column... our company was bessed with a very clear SQL server DBA in the past)
This SQL statement works:
INSERT INTO PACKINGLINE (SNO, PRDORDNO) VALUES ('1000808972', '100080897');
However when I try use SQL Developer as follows I cannot enter data:
1. Open SQL Developer
2. Click on "Tables" then on my table named PACKINGLINE
3. Click the "Data" tab
4. Click the [+] "Insert Row" Icon
5. Enter the same data as above
6. Click Commit
7. The following error is shown in the log window and I cannot commit the data change.
Error message
==================
INSERT INTO "DBO"."PACKINGLINE" (SNO, PRDORDNO) VALUES ('1000808971', '100080897')
One error saving changes to table "DBO"."PACKINGLINE":
Row 5: ORA-06550: Row 1、Column 25:
PL/SQL: ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: Row 1、Column 7:
PL/SQL: SQL Statement ignored
==================
I can copy and paste the above query into a normal SQL statement window and the data commits fine.

Its so flaky there really must be something wrong Mr Adobe support person....
If I load a PDF, do nothing, gently save it, reopen and then waiting for my trial dialogue to wake up so that I can click on continue trial... then save as extended reader blah.... then close. I have finally saved one that works!!!! but how difficult is that????
WHAT IS WRONG ADOBE??

How do I fix? Keyboard and mouse cannot enter data on IMAC

Both my wireless mouse and my wired keyboard cannot enter data. They are frozen out. But a wired mouse will work through the USB port on the back of my keyboard.
Help.

Welcome to Discussions - try resetting the SMU, and please let us know the exact model of your iMac.

How can I get user to enter date & time on a form?

I have a form where I want the user to enter a date and time for an event. The database field is in MYSQL datetime format
I've used the datepicker on the form field but it only allows for a date entry not time.(eeven when seetin the width to 22 chars
I remember doing something before which allowed the user to pick a date and then add the time at the end.
I've got the date defaulted to dd/mm/yyyy and the time to H:mm in the control panel.
Can anyone help please or is there a better way to enter date and time?.
Any help appreciated
Thanks
Clive

Two things:
The column in your database is defined as DateTime, not Date
You use the option on the Date Picker to choose datetime, not date
This will give the user the ability to choose a date and time from the date column. If you need more control over the time, you probably need to add another column defined as Time. Then you can use the validation rules to force an entry rather than allowing the default (current time).

Why do most apps make it so difficult to enter dates time and numbers

Why is it that most apps when it comes to entering a date, time or number require you to go to the ridiculous motion of entering data using a scroll wheel. For dates it should be a calendar like interface, for time and numbers give me numeric keypad. Its possible In that som apps do it, but most don't. Why is this the case?

As with 3rd party apps on your computer, this is up to the app developer for the app.
Ask the app developer.

Cannot Sync Date/Time Errors

Trying to sync with Exchange email. It worked fine until a few months ago. I checked with ISP and they said all my settings are correct. They said nothing has changed on their end and all the port settings and server are correct.
I have not made any changes to the OS within the time it worked and stopped working.
Error Message:
There was a problem syncing messages. Problem verifying the SSL certificate. Please ensure device date and time are accurate.
Error Details:
AirSAMStateMachine.c 453 14724
I checked the date/time on the palm and seems to be about 3-4 minutes fast. I'm assuming this is the problem. If I back the date and time up it ends up going back because it's syncing time with a server. Using US Eastern Cleveland or Washington DC gets the same results.
I can POP with gmail fine, but the exchange account is what's getting the error.
Any suggestions?

Thank you. I will follow up with Marriott's ATT rep. to get their input.

Cannot enter date

I cannot enter the date in my vehicle maint log numbers sheet.

Hi Pwaho,
As your question concerns the iOS version of Numbers, I've requested it be transferred to the iWork for iOS community.
You might want to add some detail regarding how you are entering the date, and what response you do get from Numbers.
Regards,
Barry

Cannot set date& time and only computer and settings icons are showing

I am having difficulty with my appletv(MC572LL/A). It will not set the time & date after it downloaded the last update. It just stalls saying "setting date and time". I have reset the system and even re-installed the latest update to the unit but get the same results. Any suggestions?

Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

HT5706 I have not used my apple tv in a few years, and just got it out of the bag. I connected it up, and it cannot set date, time. it also does not interact with the remote. Could it be as simple as a new batter is needed for remote?

I have not used my Apple TV in a few years, and just got it out of the bag to use on a new TV. I connected it up to power and with an HDMI cable toTV. It attempts to set date and time and cannot. I cannot get the remote to interact with the box also. Could it be something as simple as needing a new battery?

Hi kybriar,
Thanks for using Apple Support Communities. This article has steps you can take to troubleshoot the remote itself:
Troubleshooting the Apple Remote
http://support.apple.com/kb/ht1722
For the issue of setting the date and time, these articles may help:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
Reset Apple TV by unplugging it from the power outlet, waiting about five seconds, then plugging it in again.
Power off your TV, wait five seconds, then power it back on.
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connectionshttp://support.apple.com/kb/TS4546
Ensure that Apple TV is within range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and cable/DSL modem are connected to power and turned on.
Make sure other devices (computers, iPhone, iPad, for example) are able to connect to the Wi-Fi network and access the Internet.
Check your Wi-Fi network settings on Apple TV:
Select Settings > General > Network > Wi-Fi and press the center button on the remote to display nearby networks.
Choose your Wi-Fi network from the list.
If your Wi-Fi network uses a password, make sure you are entering it correctly.
Restart your Apple TV by selecting Settings > General > Restart.
Try restarting your Wi-Fi router or modem by turning it off and then on again.
If possible, connect an Ethernet cable and verify your Internet connection. If you can connect to the Internet using an Ethernet connection, verify that your Apple TV is using the latest software by selecting Settings > General > Software Update. If your Apple TV can be updated, install the update and then try the steps again.
Cheers,
- Ari

Cannot enter event time in Calendar 6.0

I recently updgraded to Mountain Lion, and when I try to enter a new event into Calendar (by double clicking on day, week or month and unchecking all day option), there is no option to enter the specific event time.
Also, Calendar is randomnly changing the time of events of synced google calendar events to 19:45.
Anyone else experience this problem. Suggestions as how to fix these two problems would be greatly appreciated.
Thank you.

I am having the same darn problem. I really dislike this auto feature in Calendar.
Can anyone help us please?

E75 - I have to enter date & time each time I star...

Hi, I switch off the phone and when I switch it on again, it's asking me to change the date and time from default values. I removed and installed back the battery and SIM card, then I reset to factory defaults and finally I updated FW to 202.12.01. No change. Could you please help?

This would be normal if you remove the battery for a few minutes.
If it is doing it with a fully charged battery and you have upgraded the firmware / done a reset to defaults with *#7370#, then it is likely there is a hardware fualt with the handset.
How old is it?
Regards Jon.
If this post helped you, please press the Kudos button ;-)

I cannot enter my time machine. I have a message with "error code −6584"

I am trying to access my time machine. I have an error message saying that an unexpected error occurred (error code -6584)

Reboot the whole network first and then retry TM.
If that doesn't work then do a verfiy of the backup.
hold the option key and click the TM icon in the top right area.. a menu with verify appears run that..
If still no good there is a long post with more info.. just follow the More Like This on the right to see if other solutions work.

Cannot enter data into an Allowed sites pop up.

When i click on a banking link an allowed pop up appears. It will only allow me to enter one digit of my registration no.

What kind of form is this?
Is this a normal HTML form or something special like one created by a plugin?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Emp cannot enter any time against the projects in CAT2 ?

Why he is unable to enter the timing.....Could u please suggest me the Reasons ...Please

What is the error pop-up

HT201250 I cannot enter time machine when I press the icon to enter time machine

I cannot enter the time machine when I press the time machine icon. I press and nothing happens, so I'm not sure even if it is backing up at this point. When i go to my Tme Capsule it has the folder there for back-ups and the most recent, but no access from the icon. Help me Ben Kanobi you're my only hope!

Try the things in #E4 of Time Machine - Troubleshooting.

Cannot enter Date & Time via Settings

Similar Messages

Maybe you are looking for