Cannot initializy mysql for first use

I installed coolstack 1.3 fine. But when i ran mysql_install_db --user=mysql
It failed as follow. Any idea?
thanks
=========================================================
bash-3.00# /opt/coolstack/mysql_32bit/bin/mysql_install_db --user=mysql
bash-3.00# /opt/coolstack/mysql_32bit/bin/mysql_install_db --user=mysql
Installing MySQL system tables...
ERROR: 1062 Duplicate entry 'localhost-' for key 'PRIMARY'
081209 21:25:34 [ERROR] Aborting
081209 21:25:34 [Note] /opt/coolstack/mysql_32bit/bin/mysqld: Shutdown complete
Installation of system tables failed! Examine the logs in
/opt/coolstack/mysql_32bit/data for more information.
You can try to start the mysqld daemon with:
shell> /opt/coolstack/mysql_32bit/bin/mysqld --skip-grant &
and use the command line tool /opt/coolstack/mysql_32bit/bin/mysql
to connect to the mysql database and look at the grant tables:
shell> /opt/coolstack/mysql_32bit/bin/mysql -u root mysql
mysql> show tables
Try 'mysqld help' if you have problems with paths. Using log
gives you a log in /opt/coolstack/mysql_32bit/data that may be helpful.
The latest information about MySQL is available on the web at
http://www.mysql.com/. Please consult the MySQL manual section
'Problems running mysql_install_db', and the manual section that
describes problems on your OS. Another information source are the
MySQL email archives available at http://lists.mysql.com/.
Please check all of the above before mailing us! And remember, if
you do mail us, you MUST use the /opt/coolstack/mysql_32bit/bin/mysqlbug script!
bash-3.00#

Goran O wrote:
Try Administrator/Administrator, it works for sh.rpd and samplesales.rpd.
Regards
Goran
http://108obiee.blogspot.com
Thank you too!!

Similar Messages

Any solution for iCloud - Outlook integration - Preparing calendar for first use?

Every time I switch to the calendar view I get a little bubble in the taskbar saying "preparing calendar for first use". This ends up freezing Outlook for about 45- 60 seconds -- long enough for the Outlook window to have a "(not responding)" added to the title bar. This freeze-out is massively disruptive. It seems like Outlook is re-preparing the new iCloud calendars every time. Is this normal? Is there a configuration setting I could look at for this?
Same/Reference issue found: ID # 10407486

I had the same issue, this is the solution that worked for me.
-remove all icloud sharing with caledar
-open outlook
-go to file > account settings > data files
-delete icloud data file
Now it doesn't freeze on me

Why does Outlook keep "preparing [iCloud] calendar for first use"?

Hello all --
I just installed iCloud on my Windows 7 laptop and configured it to integrate with Exchange. The functionality seems to work but there are two very annoying behaviours that I hope someone can help me with:
Every time I switch to the calendar view I get a little bubble in the taskbar saying "preparing calendar for first use". This ends up freezing Outlook for about 45- 60 seconds -- long enough for the Outlook window to have a "(not responding)" added to the title bar. This freeze-out is massively disruptive. It seems like Outlook is re-preparing the new iCloud calendars every time. Is this normal? Is there a configuration setting I could look at for this?
The iCloud calendars are always checked when I start up. Is there any way to uncheck them? Solving this might solve #1 above
Any suggestions on how to resolve and/or debug these further?
Thanks!
Ramon

Hi Ramon,
I have submitted a bug report before but haven't heard anything yet. Read more about it over here...
https://discussions.apple.com/message/17820467#17820467
Thanks,
Thomas

Preparing for First Use

I have completed the installation of Windows 7 Ultimate (64 bit) using Boot Camp Assistant on my MacBook Pro (MBP) 13-inch with 250 GB HDD (stock) and 4 GB DDR3 1067 MHz (stock), which I got in June this year (2010). So, when installation is complete, the setup asks you to restart.
So, I restarted my MBP and booted into Windows 7 Ultimate. The Windows symbol came out and after that the screen changed to the screen with the words "Setup is preparing for first use" and a bar that glows beneath it (with the glow moving from left to right and changing color through the spectrum of light). However, the setup hangs or freezes in the middle of this. This mean that the glow doesn't move and the screen does not change.
Can anyone help? Thanks in advance.

I don't know the particulars of the MBP but there should be other threads and users. It does not seem to be normal.
This is retail DVD and not an ISO downloaded and burned that came from school? otherwise you may need to re-burn the DVD.
See if it loads in Safe Mode
Reboot from Windows 7 DVD
May need to uninstall a device driver
After Windows is installed you'll need your OS X DVD to install/add Apple drivers and services
One you do have Boot Camp 3.x installed on Windows,
Boot Camp Update for MacBook Pro (13-inch, Mid 2010) (Windows 64 bit)
http://support.apple.com/kb/DL1044
http://ourcoffeestops.com/2009/01/guide-windows-7-x64-build-7000-on-a-macbook-pr o/
http://blog.andersonshatch.com/2008/04/13/macbook-pro-and-vista-64-bit/
http://www.apple.com/support/macbookpro/
http://www.apple.com/support/bootcamp/
It could be a disk error, in which case CHKDSK or start over and when you format NTFS, instead of quick format, use full format with option to map out bad blocks. And that is IF it is disk drive error.
I had an error once but it was after I had been using Windows, and I had a 2nd user account I could login and correct the problem with the first account (folder needed was read-only and likely disk I/O error).
I favor Windows 64-bit, but you may want to try 32-bit instead, and unless you plan to add more RAM, shouldn't make any real difference. Retail copy comes with both versions on DVDs.

Using Photos- prep for first use

Hi. I want to put photos on my iPad for portfolio purposes mostly and was wondering if it would be most efficient to create albums in iPhoto that are 72dpi only for iPad use, then sync to iPad? I would probably use and then dump other similar images (such as a client's session), but play a nice slideshow for them fullscreen.
If this is most efficient, what are the dpi and pixel specs that are optimized the best? I have read that the sync alone optimizes a photo, but I am not sure how exactly.
Thanks for any tips or links in the right direction!

The process you described allows you to take photos on your computer and move them to the Pad using the sync function. I can't find any place where I can select the option of taking photos that were imported directly onto the iPad, do not yet exist on the computer, but I want to select to sync from the iPad to the computer.
Right now, the only way that I can get Photos that were loaded directly onto the iPad copied to the computer is to go to iPhoto and select photos on the iPad to be imported (as I would with a direct connect of a camera or a flash card to the computer). IPad Syncing doesn't seem to "synchronize". What it seems to do is to take whatever you have selected on your computer for syncing and copy it to the iPad (with the exception of iPad apps which do seem to synchronize both ways).
Am I missing something?
Thanks.

Cannot access ASA5510 for first time config ASDM or PING

     Hi
I have a fresh out the box asa5510 with 8.4 on it.
I have built these before but for some reason cannot get this one to work. I am consoled on, have applied the following config but can still not ping to or from, can not asdm, cannot http/s. Arp table shows device it tries to ping, but device trying to pping it has incomplete arp entry.
I am really stumped, does anyone have any idea?
Please also see attached diagram for topology.
Thanks in advance
ciscoasa(config)# show run
: Saved
ASA Version 8.4(4)1
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/1
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 0
ip address 10.90.255.99 255.255.255.128
ftp mode passive
access-list MANAGEMENT extended permit ip 10.0.0.0 255.0.0.0 10.0.0.0 255.0.0.0
access-list MANAGEMENT extended permit icmp 10.0.0.0 255.0.0.0 10.0.0.0 255.0.0.0
access-list MANAGEMENT extended deny ip any any
pager lines 24
logging enable
logging console debugging
logging buffered warnings
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any management
no asdm history enable
arp timeout 14400
route management 0.0.0.0 0.0.0.0 10.90.255.126 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 0.0.0.0 0.0.0.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http
https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email
[email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:79dc4cfc6161dcbd01a016ad9a2a2ca5
: end
%ASA-7-111009: User 'enable_15' executed cmd: show running-config
ciscoasa(config)#

Hi,
In this configuration:
interface Management0/0
nameif management
security-level 0
ip address 10.90.255.99 255.255.255.128
access-list MANAGEMENT extended permit ip 10.0.0.0 255.0.0.0 10.0.0.0 255.0.0.0         // ACE1
access-list MANAGEMENT extended permit icmp 10.0.0.0 255.0.0.0 10.0.0.0 255.0.0.0    // ACE2
access-list MANAGEMENT extended deny ip any any                                                       // ACE3
In ACE1 the network 10.0.0.0/8 in the destination is not in the same network with 10.90.255.0/25 (MGMT interface)
Can you try these ACEs:
access-list MANAGEMENT extended permit ip 10.0.0.0 255.0.0.0 10.90.255.0 255.255.255.128
access-list MANAGEMENT extended permit icmp 10.0.0.0 255.0.0.0 10.90.255.0 255.255.255.128
access-list MANAGEMENT extended deny ip any any
I agree with Jouni, in first time use a PC directly to the MGMT interface.
and use the clear arp command to clear the ARP cache
Best regards

Need help with administrator password for first use??

Hi, I'm not sure if this is a dummy question. I just installed BI EE, then I was trying to open a sample Repository file, it asked me for password for Administrator account. I entered SADMIN as I found from the HELP (attached below), it didn't work; then I left it blank, it didn't work, then I tried any password I used during the installation, none of them worked.
Hopefully I can get some insight here.
Thank and have a good day.
Crystal
====================
About the Oracle BI Administrator Account
The Oracle BI Administrator account (user ID of Administrator) is a default user account in every Oracle BI repository. This is a permanent account. It cannot be deleted or modified other than to change the password and logging level. It is designed to perform all administrative tasks in a repository, such as importing physical schemas, creating business models, and creating users and groups.
NOTE: The Oracle BI Administrator account is not the same as the Windows NT and Windows 2000 Administrator account. The administrative privileges granted to this account function only within the Oracle BI Server environment.
When you create a new repository, the Oracle BI Administrator account is created automatically and has no password assigned to it. You should assign a password for the Oracle BI Administrator account as soon as you create the repository. The Oracle BI Administrator account created during the installation of the Oracle BI repository, that is, the repository shipped with Oracle BI, has the default password SADMIN.
The Oracle BI Administrator account belongs to the Administrators group by default and cannot be deleted from it. The person logged on using the Oracle BI Administrator user ID or any member of the Oracle BI Administrators group has permissions to change anything in the repository. Any query issued from the Oracle BI Administrator account has complete access to the data; no restrictions apply to any objects.

Goran O wrote:
Try Administrator/Administrator, it works for sh.rpd and samplesales.rpd.
Regards
Goran
http://108obiee.blogspot.com
Thank you too!!

Cannot update ipod for disk use

When I plugged my new iPod into a second computer, it asked if I want to sync it to this computer. I said no, and clicked "don't ask me again". Now I want to use as a hard drive, but when I plug it in, the iPod mounts, "updates", then unmounts. iTunes still shows it, but I can't change the settings and update it because the iPod now has its normal screen as though it isn't plugged in.
Very frustrating. I've tried about 30 things and short of completely restoring it and being more careful about how I answer questions (and recopying 40gigs from my other computer) I can't think of a way to use it like I have every other iPod I've used.

plug it back into the first computer, use those preferences to enable disk use and then try to use it as drive on second computer.

Second system User cannot see files for first system User

For reasons too complex to go into, I had to set up a second system User. (Okay, an Apple tech at the Apple Genius Bar did this, to fix corrupted Apple Mail)
I am both Users. Both are admins.
According to the documentation, User2 should be able to see files belonging to User1 (and vice versa, I presume), but this is not happening. It looks like I have to manually transfer files from User1 to User2. (Once I do this, I will abandon User1, so I don't have to keep them in sync.)
How to set up so User2 has access to User1's files (and vice versa)?

Once you enable sharing, you use the Finder window to go to the other user home folder/directory. For example, if you're logged in as user1 and you want to see the user2 tree, just tell Finder to open /Users/user2 (via the Go command). This assumes that all your user folders are located in /Users - if you have for example a separate disk for user folders then you would substitute that volume name - for example you have all your user home directories on /Volumes/Users, you would tell the Go command /Volumes/Users/user2
Also, just to make something clear - don't spread your files across the two user accounts - copy all the stuff from both into one of the user accounts and then when you have everything you need, you can get rid of the account that is no longer needed. The only problem you might run into is that you have files owned by an account that is different from where they are physically located. But if you copy things (don't move them - copy them) you should not run into this issue. But if you do run into this issue, it is easily resolved with a couple of Terminal commands usually. Do you know how to copy things with Finder as opposed to move them?
Does that help?

Problem entering PIN for first use

Hello, everyone,
I just received a Blackberry Curve 9300 and am trying to get started with it.. The first step is to enter the PIN, which I assume is the PIN given on the box. It is an 8-character, alphanumeric code. When I attempt to enter the PIN, the field only accepts 7 characters. In addition, since the PIN is masked when it is typed, I can't verify the characters I enter.
The no doubt helpful web pages and demos on the Blackberry site are no longer there for this model, I get a "404 page not found" message.
Any advice will be most appreciated!
Thanks,
Margaret Doyle
Solved!
Go to Solution.

Ditto what jamead stated, if you or your carrier has a security lock on the SIM card, then the PIN will be asked at boot up.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT2311 i cannot get update for itunes using app store

it always says no updates available.
i dont understand how you designed this most stupid ever ox in the first place. if you do not offer us customers an alternative way to do the updates, please make the only way as perfect as you can, and i dont think that is so hard for you.
the same problems happened to my iLife suite, no updates available but they keep saying there are updates outthere, this is more annoying than you could imaging

Lucas . . . you may have lucked out by not being able to update iTunes. They have totally changed iTunes with the new version and literally 95% of people HATE it. They have dropped coverflow and a lot of other stuff.
It TOTALLY $ucks! I hate it and am trying to find a way to safetly revert to iTunes 10.7

NB 305 7 Starter Restore "Preparing Computer for first" use how long stuck??

OK, I've searched far and wide for a straight forward answer on this, but I can't seem to find one anywhere...
So I did a restore on my NB because the guy I bought it from had deleted everything, but didn't do a restore, and It's running 7 starter, and didn't come with a disk...
So I went through the wizard and got everything partitioned and the reboot, now It's stuck (maybe I don't know) on the "setup preparing desktop" page, and has been like that for a little over an hour.
Now I'm not sure, how long it's supposed to take, as I just got it and haven't played with it much, but Is it supposed to take this long?? If not, what can I do? I saw a couple posts about going through CMD to remove drivers, but I don't have a disk, or USB, and I don't think I can get into BIOS or safe mode.. Anything would be helpful! Thanks guys!
Solved!
Go to Solution.

mini notebook NB305-N413BN
Downloads here.
You should obtain a recovery USB thumb drive from Toshiba. Scroll down to Get Recovery Media here.
For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 62 of the User's Guide.
NB300 Series User’s Guide
-Jerry

My system freezes during start-up "for first time" after running System Recovery.

HP G62-227CL
Win 7 (64 bit)
No error message, per se; just a frozen screen during reboot.
Months ago, my computer suddenly started glitching on me. I shut down and tried a reboot. The system froze on the boot screen with the flying colors. Tried system recovery several times but must have done something wrong because it would not run. Resolved to buy a new hard drive and reinstall from recovery discs. Delayed for no good reason until today, months later.
Before buying new hard drive, decided to run System Recovery again. It worked! I tried the option that deleted everything and restored to original factory settings and software. Everything appeared to work like a charm: hard drive reformatted, software reinstalled, system prompted me for a reboot. I did. Windows started to start, "Setup preparting your computer for the first use" appears . . . and freezes. For hours. Hard drive indicator light is off.
BTW, made sure that the Wi-Fi button was on as I read about Recovery issues if it was off when the program ran.
Rebooted. Hit F11. Ran maintenance and checked hard drive for errors. There are errors. Unfortunately, the default setting of CHKDSK does not repair them. Opted for a command prompt. Rand CHKDSK again with "/f /r" option seen in other posts. I'm too ignorant here to get the program to run properly, I guess. I ran CHKDSK on both drive X and C. No errors found . . . sort of. I know they exist because the system will not boot up. (Yes, I tried again.) Back at command prompt, I tried to run CHKDSK on drive C again. This time I received a message that I would first have to unmount (dismount?) the drive. As I do not know what this means, I opted for "no" and have decided to post this message for assistance.
So. Suggestions on what I do next? More specifically: how do I get CHKDSK to repair the errors it found? I believe the message was: "Errors in $130 of sector . . ." It displays this message twice at 62% completion. Freezes for a long time. Gets going again only to slow to a crawl again around 70% but for not as long. Then returns back to the start screen of System Recovery.
Ran System Recovery again for kicks. Again, appeared to work like a charm. Unfortunately, the laptop is once again sitting frozen on the "Preparing . . . for first use" screen again. It is getting hotter the longer it sits. The fan is now audibly running at higher rpms . . . if any of that helps. I'm shutting it down and waiting for your advice.
Thanks!
This question was solved.
View Solution.

Hello Miles1966. I understand you're experiencing some issues with your notebook freezing.
This does sound like a hard drive problem. The freezes, missing HDD indicator light, and inability to perform a recovery are all symptoms of a failing hard drive. You had been using CHKDISK previously but have you tried running the diagnostic which is built into the BIOS? Try following these steps and post the result of the diagnostic. I suggest running the memory test as well just in case.
Let me know the result of these diagnostics. I hope you have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Installation of Elements 12 download hangs up at "setting up first use"

I bought a download copy of Photoshop elements 12 to load on my cloud server. Installation went smoothly until the very end when it hung up at "setting up for first use" and would not go forward. When I finally cancelld the dialog box, I received the message "Adobe Application Manager, required to strat your trial, is missing or damaged". This is not a trial and I enetered the proper serial number given to me. What do I have top do to ake it work? Adobe site is no help and customer service is a joke.

Hello & welcome to the Forums!
Have you applied the Firmware Uodate to be able to install past 10.2?
As explained in "Mac OS X 10.2 Welcome and Install Manuals" and "Mac OS X Welcome and Install Manuals", you may need to update the firmware on your Macintosh computer prior to installing Mac OS X 10.2 or later. The following table lists the firmware updates that are available for Apple products that can update to Mac OS X 10.2 or later.
http://support.apple.com/kb/HT1395?viewlocale=en_US
http://support.apple.com/kb/DL1251?viewlocale=en_US
http://support.apple.com/kb/DL1267?viewlocale=en_US
Might try XPostFacto also...
http://eshop.macsales.com/OSXCenter/XPostFacto/Framework.cfm

Outlook Sync Error SOLVED - Multi-day repeating appointment cannot be converted for use on the Handheld...

*UPDATE 1/23/2009 07:08 AM* This is a partial fix. I no longer think the Recurrence Range is the culprit. It seems the Time Zones features between Outlook & Palm are not cooperating. This explains why my 12 am events are syncing as 6 pm the day before; I live in GMT-6:00 so it's moving my events ahead by 6 hours. Another event I set for 1 pm in Outlook was changed to 7 am on my Treo. I am going to start over and recreate each event, this time setting the Time Zones, which I hadn't done before. I tested it out and it worked with a single event... let's see how long it lasts. I've also found that using 'No Time' on my Treo is not compatible with Outlook. It's better to set a time with 0 minutes duration.
*UPDATE 1/23/2009 04:11 AM* This is a partial fix. My monthly and yearly problematic recurring events are now showing up at 6 pm the day before on my Treo, though my Outlook calendar is fine. I think this has to do with the Recurrence Range Start/End in Outlook, which is set automatically. If only there were a way to change this...
After a WHOLE LOTTA trial-and-error (like 3 days worth), I think I finally solved my OLERR:14-001 issue!
Problem: Syncing Palm Treo 755p calendar with Outlook 2007
Error Message (simplified):
HotSync session completed with messages on [date] [time]
HotSync session started on [date] [time], and completed in [0] seconds
Outlook Calendar synchronization completed with messages
Duration: [0] seconds
Outlook Calendar
The multi-day repeating appointment titled [event] beginning [date] [time] cannot be converted for use on the Handheld. Please divide the appointment up into single-days and re-synchronize.
OLERR:14-0001
- Desktop overwrite HH Sync
Note: You will likely have several of these ‘Multi-day’ instances in your hotsync log (I had 58). You may want to change Calendar in hotsync to "Desktop overwrites Handheld" after you get this error, to avoid erasing events while you are fixing this issue. Otherwise, you may have to restore them from a backup copy (if you have one) and start over. You can switch back once you’re through.
Solution: First, I tried this Palm KB Article: http://kb.palm.com/SRVS/NUA/launchKB.asp?c=31167. After this didn’t work for me… I did trial-and-error. I believe the problem is that each recurring event, which you set up as ‘All-day’, must be changed to have a duration of 0 minutes from within Outlook. I was able to change some events directly, but I found that some of the records had corrupted, and would just revert. My fool-proof solution was to recreate EVERY problematic event (yes, one-by-one) using the following steps:
Open Outlook
Go to your default calendar, where your events are synced
In the top menu choose ‘View’ > ‘Current View’ > ‘Recurring Appointments’
Open a ‘New Appointment’
Enter subject and other options, such as Categorize, Importance, Time Zones, or Reminder
Make sure starting and ending date & time are the EXACT same
Select ‘Recurrence’ & choose your pattern
I did not choose ‘No end date’ (hence the Palm article), but rather ‘End by:’ and typed in 2031, then pressed tab to auto-generate a suitable end date. I chose 2031 because that is last year my Treo’s calendar goes to. Click OK
Repeat for every event in your error log, until you get a clean "Desktop overwrites Handheld" hotsync (Outlook should be closed when you sync)
Switch Calendar in hotsync back to "Synchronize"
Even though I still get the message OLERR14:001, my syncs are successful. Now I will give my Treo time to see if the issue returns later. Until then, happy Outlook syncing and good luck!
Post relates to: Treo 755p (Sprint)
Message Edited by akeaw3000 on 01-23-2009 04:11 AM
Message Edited by akeaw3000 on 01-23-2009 07:08 AM

hello,
if all of your data is on the phone you can change the sync action to handhled overwrites desktop
how to:
open palm desktop software
on the top left click on 'hotsync' and then 'custom'
on the calendar conduit
highlight it and click on 'change'
then choose 'handhled overwrites desktop'
hope this will help you
Post relates to: Palm TX

Cannot initializy mysql for first use

Similar Messages

Maybe you are looking for