Cannot login Windows XP SP2

I have been using a T60 since last 2 years with Windows XP SP2 OS. I use IBMs client security to log-in and it automatically retrieves windows password. So I dont have to type the windows password during login. Two days ago, during loging in, it stopped at the windows login stage and stated that Windows password was not correct. I used my rescue and recover disc to recover my Windows password. But even this password does not work with Windows. I am sure that I am not copying or typing anything incorrect...I have tried several times now and that password for windows is a one I use at other places as well, hence no scope for errors there.
I have even tried loging Windows with userids - "adminstrator" / "ADMINISTRATOR" / "system" / "SYSTEM" with a blank password, but none of them work.
Any kind of help/ advise is appreciated. Thanking you in anticipation.

welcome to the forum!
unfortunately we do not allow the discussion of password retrieval or subversion per forum rules.
thanks for understanding.
thread locked.
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Similar Messages

Some Users cannot login via Lync 2013 windows client

Hi,
I have a Lync 2013 FrontEnd server, DB server and Edge Server.
Since last noon we are facing a mysterious issue. Its as below.
( I have just entered into Lync administration)
User A and User B, both were able to login to lync till yesteday noon on their individual PC, any PC or mobile (windows, android, mac) with any version of Lync client, inside and outside the organization.
Last noon User A reported that he is facing an issue that whenever he logs in to lync 2013 client he is automatically logged off in 2 to 3 seconds. Then again logs in automatically and again loggs off in 2-3 seconds. and thats all is happening again and
again. The message he is is getting after he is logged off is "The connection to the server was lost
. Reconnecting. Current calls may continue, but with reduced functionality".
But at the same time he was able to login from other computer and his mobile device. At the same time, User B is not facing any issue on his machine.
Then User A tried to login from the User B's computer and there also he faced same issue. Then i asked User B to login on computer of User A and what i see is User B is able to login on User A's computer.
What is concluded from the observation is, User A cannot login from lync client 2013 from any computer inside and outside of my network and can login from any other client/version/platform inside or outside of my network.
What i checked for is Client Version Policy of User A and User B, but both are same (Automatic). Below is my client version policy and i am using client version 15.0.4605.1000
In Sing In Logs. (By Right click on system tray icon of lync) i got below information.
Error-1
In Windows 8, event viewer i am getting only Event ID 1 or 12 which says, "
The description for Event ID 12 from source Lync cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Lync
Thanks, Rishi Pandit.

The issue has been resolved by removing an entry from "Trusted Application Server". This application server was being used for Polycom VC infrastructure integration with Lync.
As per Task 4 section in
Polycom and Lync Integration Documentation we have to use below-
http://support.polycom.com/global/documents/support/strategic_partner_solutions/Polycom_UC_Microsoft_Deployment_W8.pdf
Use the New-CsStaticRoute command to set up a static route for the RealPresence
Collaboration Server system.
$route = New-CsStaticRoute -TLSRoute -destination rmx.corp.local
-port 5061 -matchuri sipdomain.com -usedefaultcertificate $true
where rmx.corp.local is the FQDN of the RealPresence Collaboration Server SIP signaling
domain and sipdomain.com is the name of the Trusted Application Pool you created.
but this was wrong.
we used sip.domain.com and issue got resolved. Polycom forgot one (.) dot between sip and domain.com which ruined us.
Thanks.
Thanks, Rishi Pandit.

After 9i (9.2.0.1)Install on Windows 2003 cannot login as sys/sysdba/system

Hello all,
I need to someone's help.
I just installed Oracle After 9i (9.2.0.1)Install on Windows 2003.
I can only login using scott/tiger.
cannot login as sys/sysdba/system
I used Oracle dtabase Configuration Assistant. At the last step it asked me if I want to change sys and system passwords, I did. However, I cannot verify if system took those. The default combinations system/manager sys/change_on_install are not working.
As well as my new passwords.
How can I resolve it?
Thank you in advance,
Sonya

Recall what you used and you should be able to login .
OR
On windows create new password for sys user. This should work for you since you are on windows OS
back up the file in you ORACLE_HOME/database/PWD<SID>.ora
Create a new one using
orapwd file=...database/PWD<sid>.ora password=<new password> entries=5
stop the oracleService<SID>
start the oracleService<SID>
sqlplus /nolog
connect sys as sysdba
Enter password: <new password>
You should be able to login with this new password created
Ss

Poblem connecting CISCO anyconnect secure mobility client ver. 3.1.04 versus Windows VISTA SP2: Login denied

Hi,
Suddenly I have this error with my client cisco AnnyConnect ver. 3.1.04063 connecting with my computer:windows vista SP2.
Message appeared: "Login denied. "name_company" security policies have rejected your login" and nothing else.
I tried to uninstall and reinstall the client annyconect ver.3.1.04063 but not success, the same message, I think it's a problem with my computer because my user id with other computer colleagues runs ok and I can authenticate perfectly.
Few days ago and always I have worked without problems then I don't know what happens...perhaps an automatically update of windows vista¿?
Anyone of you with similar issue or problem?
Thanks in advance.

I have another computer with windows 8.1 and Cisco VPN Anyconnect version 3.1 works fine ! what is wrong with this computer. After a little bit of research I realised that this issue is from cisco hostscan. Interesting enough comp A(computer A) where vpn client works does not have cisco host csan folder in program files (x86). On this computer I did saw that folder and deleted it.
I found the following information
C:\Users\<user>\AppData\Local\Cisco\Cisco HostScan\lib has some sort of .libs for various antivirus.... I have AVG Antivirus 2015 and Spy Bot ...
I have attached log files, if anybody wants to investigate then you are more than happy to investigate. Happy to be of help in case if you need any further input.
Tired of breaking my head...

My sql+ windows shuts down autmatically and cannot login why?

Hi there,
the SQL+ window automatically closes. After reopening it, i cannot login, gives the follwoing error:
ORA-12541: TNS:NO LISTENER
why this happense? How i fix this?

here what says on the command window:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC0)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 8.1.7.0.0 - Production
Start Date 21-MAY-2008 03:55:34
Uptime 0 days 2 hr. 14 min. 1 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File E:\oracle\ora81\network\admin\listener.ora
Listener Log File E:\oracle\ora81\network\log\listener.log
Services Summary...
Ora8i has 1 service handler(s)
PLSExtProc has 1 service handler(s)
The command completed successfully
i also ran the start command. But still gives the same problem!.
I cannot remember what i did to close the SQL window but i'm sure it happened
when i used ALT+TAB to switch between windows.
Anyway i can login if i reboot my PC. But i can't reboot every time this happense.
SO please help me to solve the problem?
Thanks!

Why my desktop adobe creative cloud cannot login but window adobe creative cloud can login :(

why my desktop adobe creative cloud cannot login but window adobe creative cloud can login anyone can help me ?

Please read, and reply back here with information https://forums.adobe.com/thread/1499014
-and try some steps such as changing browsers and turning off your firewall for downloads
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Cannot display login window as "List of users"

I am running Leopard Server, and I cannot seem to get my OS to display login window as "List of users".
The option is grayed out in System Preference, and if I use Workgroup Manager to set the Login preference for this computer to "List of users able to use these computers", my computer doesn't seem to respect that. Although it does respect the "Show Restart/Shut Down button" when I turn that on/off.
I tried to edit the com.apple.loginwindow.plist in /Library/Preference, no option found for display login window.
Help please, thanks.

The way to switch between the two options is:
defaults write /Library/Preferences/com.apple.loginwindow SHOWFULLNAME 1
(turn on name list)
and
defaults write /Library/Preferences/com.apple.loginwindow SHOWFULLNAME 0
(turn off name list)
and use
defaults read /Library/Preferences/com.apple.loginwindow SHOWFULLNAME
to see what the current setting is. Note that when you use the defaults command, you omit the ",plist" on the preference file name.
As always, beware of trying to bypass measures put in place to protect you, and be careful modifying preference files since you can lock yourself out or prevent your computer from booting properly.

Desktop Display distorted ... cannot see GUI to reset ... login window FINE

Please help ... Somehow (I did it but don't know how) the Display settings on my Tiger Mac have gotten to some setting that distorts the image beyond visual comprehension (diagonal scanline-like distortion). The login window is just fine, but when the desktop launches it goes batty.
I've zapped the PRAM to no avail.
I'm totally stuck.

First do this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Next do this...
Archive and Install feature...
http://docs.info.apple.com/article.html?artnum=107120
Then after booting up, repair Permissions, then reapply the combo update...
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions afterwards, reboot.

Window XP sp2 share printer with Mac OS 10.9.2 pause cannot resume

Hello All!
I have a printer HP P2015 install in Window XP SP2. I share it over LAN to print. A user is using MAC OS 10.8.5 is pinting nomarling. But Another is using MAC OS 10.9.2 canot print to it because while print it alert pause and canot resume. How can i fix it.
I found the newest driver for printer, Repair Disk Permissions at cups directory and reset printing system but it not work. please help me.
Thank you very much to read.

Hi Real_Time,
Although I would like to help, I suspect your question would be better answered in the HP Enterprise Business Community, as the HP LaserJet P2015 Printer series is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to log into the commercial forum > HP Enterprise Business Community
Maybe the printer support page could be helpful too, HP LaserJet P2015 Printer series
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Cannot install Oracle9i AS R2 on windows XP SP2

During the configuration process the installation doesn't go on and it's stopped at this point:
=================================================
Reading ini file - 'C:\ApplicationServer\Ora9iASR2/j2ee/deploy.ini'
OC4J instance 'OC4J_Demos': Adding property 'jbo.server.in_oc4j=true'
OC4J instance 'OC4J_Demos': Adding property 'org.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB'
OC4J instance 'OC4J_Demos': Adding property 'org.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORB'
OC4J instance 'OC4J_Demos': Adding OC4J command line option '-userThreads'
OC4J instance 'OC4J_Demos': Adding java command line option '-Xmx512M'
OC4J instance 'OC4J_Demos': Adding property 'oracle.path=%PATH%'
OC4J instance 'OC4J_Demos': Adding property 'oracle.display=:0.0'
OC4J instance 'OC4J_Demos': Adding Environment variable '%LIB_PATH_ENV%' with value '%LIB_PATH_VALUE%'
OC4J instance 'OC4J_Demos': Property 'jbo.server.in_oc4j' already exists with value 'true'
OC4J instance 'home': Adding property 'jbo.server.in_oc4j=true'
Initializing DCM..
=============================================

I met this problem too,maybe it can not install on windows xp sp2, I don't know how to solve it,up for y!!

When i login to update my existing apps, the login window shows the wrong apple id. and it's all prayed out, i can't change it. how do i solve this problem?

When I login to update my existing apps, the login window shows the wrong apple id. i cannot change it because it is all grayed out. how do i solve this problem?

Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID.

Cannot login after upgrade

Seems to have been covered elsewhere, but not quite the same issue.
Updated to latest verison of Snow Leopard on my MacBook Pro and Mac Pro in preparation for installing Lion.
Installed Lion on MBP which all went perfectly and been using it for a week without problem. So, time to install on the Mac Pro.
First, installed it on a blank external disk connected to Mac Pro, as an emergency disk. At the end the MP would boot from that drive and I could log in with the single admin account that I had created. Looking good so far.
Rebooted into SL and installed Lion again, but on the main disc. No errors and was finally presented with the login screen, listing all the correct users. Selected a mobile user account (account is on local SL server) and I was able to type in the password, but then when pressing return (or clicking arrow on RHS of text box) the arrow is replaced with a spinning daisy wheel which spins forever.
Logged in remotely (which works fine) and rebooted machine. Tried to login with a local admin account, but same problem. I can however login in with the Guest account, but if I try to switch users to another more useful account, it's just a big grey blank screen.
So there is something up with Lion being able to log in to those existing accounts.
I tried to boot into safe mode (from the main HD), I get the progress bar which seems to be Lion's way of saying it's starting in safe mode, but then a while after the progress bar completes and vanishes, it reboots all by itself. If i just let it boot and try and login, I'm stuck again (it's obviously NOT in safe mode) and if I hold down shift again while rebooting, I get the progress bar and eventually another auto reboot and so on. IOW, it is NOT possible to fully safe boot.
Since the MBP contained the exact same accounts and it was bouind to the same server when it was upgraded, I cannot understand why it's such a problem on the MP, yet working perfectly on the MBP. Anyone shed any light on this?

Since my original post, I've re-installed Lion, but no improvement. I then clered out the caches as indicated elsewhere - no change. I then noticed that the Little Snitch utility was exiting and respawning continually so I moved out all LauchAgents and LaunchDaemons except for an Apple one for disc repair that also exists on my MacBook Pro on which I can login perfectly. The others did not exist on the MBP so I'm thinking they are the cause.
Even though I now don't have the error messages in /var/log/system.log about Little Snitch, it still gets stuck in the same place with the following entries:
Aug 8 19:08:17 macpros SecurityAgent[118]: Login Window login proceeding
Aug 8 19:08:18 macpros NetAuthAgent[161]: 3891612: (connectAndCheck) Untrusted apps are not allowed to connect to or launch Window Server before login.
Aug 8 19:08:18 macpros NetAuthAgent[161]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Aug 8 19:08:18 macpros NetAuthAgent[161]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Aug 8 19:08:18 macpros com.apple.netauth.sys.gui[161]: _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
Anyone suggest what is going wrong here?

Cannot login to network account (leopard client and server)

Up until now, I have used local accounts on my leopard server. I want to start experimenting with OD prior to implementing. I created a new user account in the /LDAPv3/127.0.0.1 domain, and have bound my leopard client to the server using directory utility. On the login screen, "Network Accounts Available" has a green button to the left of it. When I try and login to the server account, the login window just shakes. At first, I could enter the password and then it would prompt me for a new password. Trying to enter a new password would not allow me to login. I went back to server admin and disabled the "require new password" setting, (as well as the other good security policies)...
I have also reset the password in WGM, and made sure to disable all the security stuff there too...
Lastly, I have deleted the server in directory utility, rebooted, then added it back in, and rebooted again...
I still cannot login to the server account, the login screen just shakes
Does anyone have an idea of what settings and or logs I can check to try and narrow down what is going on?
Thanks in advance....

to close out the thread, I have working dns on my network, but I did not have dns enabled on my server. I enabled the dns service and entered just the info for my server, then assigned my server and client to use the server's ip addy as the primary dns server. Next, I created the home directory.
Once both steps were done, I was able to log in from my client to my server based account...
FYI-I found a document on afp548.com called "leopard server: advanced setup, rsync backup and automated reporting" that walks you right thru the process...Here is the link, it's a very useful doc....
http://www.afp548.com/filemgmt_data/files/Leopard%20Server%20Quickstart%20Guide. pdf
thanks again boomboom_uk and woVi, your suggestions were spot on....

Cannot login with AD credentials on iMac

Greetings:
I have a brand new 27" Intel iMac that had been allowing AD logins just find until today. Now, no matter what I do, unbinding, rebooting, manually joining domain (dsconfigad), etc I cannot login using my AD credentials. This had been working flawlessly until today. I can bind to AD no problem. When I go to login with my known good account, I just get the window shake. Logging in with a local account, I see error messages in the console of:
DNS Update Failed & Enter Machine Password
The machine account is already staged in our OU. I am not clear what the DNS error is alluding to.
reading through these postings: http://www.macwindows.com/snowleopardAD.html
I tried disabling creating mobile accounts at login. However that did not fix the issue.
I believe our campus is running Win2K8 AD servers. Our campus DNS appliance is a separate box, but should know how to delegate to AD (?). The other 10.6.3 machines we have, are authenticating against AD fine.
Any ideas?

Marcus is correct - the ZAM administration accounts (ZAM 7.x) are stored (encrypted) within the ZAM database.
Within ZAM 7.x there is no way to integrate this with AD (either by LDAP referral or some kind of identity / password sync) and AFAIK no plans to add this.
I believe in the ZCM version of asset (and I hope the standalone version of ZAM10 still in dev) you set up the AD account(s) that is/are allowed Admin etc. access within ZAM, then LDAP referrals are used to authenticate via AD. I don;t know this for sure, though.

Cannot login with Active Directory Account

Hello,
I am testing SnowLeopard (10.6.1) for deployment in my labs for the Spring 2010 semester. We use local home directories. This is a brand new fresh install of SL, on a freshly formatted Hard Drive.
When bound to Active Directory I can get any AD account that I've tested (5 different accounts) to authenticate except one, which happens to be my own personal AD account.
The secure.log shows these entries when I attempt to login:
Oct 9 14:18:29 mac-0017f20fc40 SecurityAgent[209]: User info context values set for ctarbox
Oct 9 14:18:29 mac-0017f20fc40 authorizationhost[208]: Failed to authenticate user <ctarbox> (tDirStatus: -14090).
Considering that I could log in with other accounts, and after resetting my AD password then still not being able to authenticate, I came to the conclusion that I had a corrupt OU in Active Directory.
I contacted one of our AD admins and had him delete both of my AD accounts: ctarbox and ctarbox1 then recreate both accounts. I still cannot login to AD with my ctarbox account.
I can still login to my current lab machines anywhere on campus running 10.5.8 with ctarbox.
I am baffled by this. I have been authenticating to Active Directory since 10.1 and have never seen anything like this.
Any idea, anyone?
Cheryl Tarbox
Macintosh Support Specialist
Binghamton University

I have found the solution to my problem. I have accounts in two different domains in our AD tree. I'll called these domains Domain A and Domain B.
Domain A is the primary domain for authentication to our public computing labs.
Domain B is a secondary domain for authentication to shared resources for faculty/staff.
Both accounts have the same user ID, but different passwords. In my Directory Utility>Advanced>Administrative window I have the option "Allow authentication from any domain in the forest' checked.
With this option checked Directory Utility in 10.6.1 will allow me to authenticate Domain B, but not Domain A.
With this option checked in Directory Utility in 10.5.8 just the opposite is taking place, I can authenticate to Domain A, but not Domain B.
It seems that somewhere in the upgrade to 10.6.1 the search policy for Active Directory has changed. My workaround is to uncheck this option and specifically choose Domain A in the search policy.

Cannot login Windows XP SP2

Similar Messages

Maybe you are looking for