Cannot Power On the virtual machine

When I was trying Live Migration (hostname:'foo'), it failed. And I rebooted all Virtual Server and Management Server, but I can't boot the machine 'foo' anymore. The error log says,
failed:<Exception: vm('/OVS/running_pool/77_foo') status ('PROCESSING') not in ('DOWN', 'RUNNING', 'SUSPEND', 'ERROR')> StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 107, in stop_vm db_chkset_vm_status(vm_path, ("DOWN", "RUNNING", "SUSPEND", "ERROR"), "PROCESSING") File "/opt/ovs-agent-2.2/OVSDB.py", line 159, in db_chkset_vm_status raise Exception(errmsg)
I can start 'foo' using 'xm create' command, but VM Manager status wouldn't change.
Any suggestions appreciated.
Thanks.
Tomohisa Ohkawa

i m use ovm 2.2
agen : 2.3
some error when power on guest vm
Start - /OVS/running_pool/975_Linux_Name
PowerOff failed. Result -failed:<Exception: vm('/OVS/running_pool/975_Linux_Name') status ('PROCESSING') not in ('DOWN', 'RUNNING', 'SUSPEND', 'ERROR')>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 137, in stop_vm
db_chkset_vm_status(vm_path, ("DOWN", "RUNNING", "SUSPEND", "ERROR"), "PROCESSING")
File "/opt/ovs-agent-2.3/OVSDB.py", line 107, in db_chkset_vm_status
raise Exception(errmsg)
can help me?
thanks
vio

Similar Messages

Cannot Power On the virtual machine v 2.2

i m use ovm 2.2
some error when power on guest vm
Start - /OVS/running_pool/975_Linux_Name
PowerOff failed. Result -failed:<Exception: vm('/OVS/running_pool/975_Linux_Name') status ('PROCESSING') not in ('DOWN', 'RUNNING', 'SUSPEND', 'ERROR')>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 137, in stop_vm
db_chkset_vm_status(vm_path, ("DOWN", "RUNNING", "SUSPEND", "ERROR"), "PROCESSING")
File "/opt/ovs-agent-2.3/OVSDB.py", line 107, in db_chkset_vm_status
raise Exception(errmsg)
can help me?
thanks
vio

In the past the following procedure did the trick for me, and it worked smoothly and with no subsequent troubles.
But as it is probably totally unsupported, use it if you wish, under your own responsibility (eventually backup everything etc. before trying).
Log in as root to the physical server where your VM is supposed to be running. Better to check if it's present on any of the physical servers in the pool, checking all of them one by one.
From the command line give an:
xm listand verify if the VM guest is listed or not. If it is present, kill it:
xm destroy YOUR_VM_NAME"xm list" again and check that it's not there anymore.
Then log in as root to your VM Manager machine. You'll need to access the XE Database, so you have to set the following environment variables:
export ORACLE_HOME='/usr/lib/oracle/xe/app/oracle/product/10.2.0/server'
(OR ANYWAY THE CORRECT PATH TO YOUR XE ORACLE_HOME)
export ORACLE_SID=XE Then connect to the Database:
$ORACLE_HOME/bin/sqlplus
Username: sys as sysdba
Password: YOUR_PWDLet's now check what's written in the relevant table:
select t.status from ovs.ovs_vm_img t
where t.img_name like 'YOUR_VM_NAME';You'll probably see that it' "Processing" or something like that. If it is, let's fix the status to "Powered Off":
update ovs.ovs_vm_img t set t.status='Powered Off' where t.img_name like 'YOUR_VM_NAME';
commit;BE CAREFUL: "Powered Off" and "YOUR_VM_NAME" are case sensitive. Use them in the correct way!
Finally, exit from SQL Plus:
exitGo back to VM Manager console, eventually refresh the screen. Your VM should now appear as "Powered Off". Switch it on.
HTH

While deleting the virtual machine .vhd folder -- error msg : the process cannot access the file beacuse it is being used by another process

When i am trying to delete the Virtual Machine folder/directory i get the below error. Virtual machine is turned off
V:\>rmdir ME-EXCAS01 /s
ME-EXCAS01, Are you sure (Y/N)? y
ME-EXCAS01\ME-EXCAS01\Virtual Machines\1B1FD14E-B3F0-4232-9F96-2A871E879CD6.xml
- The process cannot access the file because it is being used by another process
How to delete the whole folder ?
Thanks

Also, if your VM has snapshots and you delete it, you must wait for the snapshots to finish merging - the VHD files will be locked until then.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need! Anybody out there with a similar problem? Help!

Thanks - Of Course the first thing I checked and did.
Disc Utility reads as follows:
Capacity : 159.18 GB (159,182,127,104 Bytes)
Format : Mac OS Extended (Journaled) Available : 11.47 GB (11,472,896,000 Bytes)
Owners Enabled : Yes Used : 147.71 GB (147,709,231,104 Bytes)
Number of Folders : 139,540 Number of Files : 511,832
Activity Monitor(Disc Usage) shows something quite interesting. Mac HD and Ramanan (Main User) - My hard drive is only 160GB! Would the retired engineer gentleman please note as well. Many thanks. Rams

DPM 2012 R2 cannot browse the contents of the virtual machine, Error 958, Details: Internal error code 0x80990F4E

Hi,
We have a Microsoft System Center 2012 R2 Data Protection Manager Version 4.2.1235.0 as a Guest system on a Hyper-V node. The Hyper-V role is on a Windows Server 2012 R2
I receive this error message:
DPM cannot browse the contents of the virtual machine on the protected computer [computername]. Item level recovery is not supported in the following scenarios.
1. The VHD contains a dynamic disk inside the guest OS.2. The VHD has no volume.
3. HyperV role is not installed on DPM server.
4. Automatic mounting of volumes is disabled on the DPM server.
1) Try enabling automatic mounting of volumes using mountvol on the DPM server to perform item level recovery
2) Otherwise perform a full restore of the virtual machine.
ID: 958
Details: Internal error code: 0x80990F4E
One of our protected Hyper-V guest systems backup suddenly refuses to browse the content of the VHD file. The system has 2 VHDs. One for the operating system and one for the data. The OS VHD has no problem with content browsing only the data VHDX started
this error after the installation of september update. I already checked the status that was suggested (1. the vhd contains a dynamic disk... etc. ) and everything is well configured. I have no free space to make a full recovery cause it's 6TB of data.
The updates that were installed are:
DPM Server
KB2977629
KB2966828
KB2988948
KB2993651
KB890830
KB2977765
KB2894856
Protected Guest system
KB2972213
KB2977629
KB2894852
KB2973114
KB2993651
KB2988948
KB890830
KB2977765
KB2894856
Any advice? Thank you in advance for any help.
Andras

Hi,
Does the protected VM have Windows dedup enabled on the volume that cannot be mounted ?
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Need to access the Power shell within Virtual Machine Manager.

Hi all, I have a VM that shuts down everyday between 9-10PM. I would like to get a script to start it up at 11PM. However, the issue I have that if i run the powershell command "start-vm -servername" from the Powershell within the Virtual
machine manager it works without an issue. However I can not get my script to use that powershell. If I use the normal powershell, that command does not work. Hopefully that makes sense.
I'm running Windows server 2008 R2 standard with VMM 2008 R2.
The VM is being decommissioned in Q1 2015, so this would be the most cost effective way to restore functionality.
Any help would be greatly appreciated.
Gurmukh

Hi Noah, thanks for the response, here is the output from that command. As you may have guessed I'm a powershell newbie
PS C:\Users\gurmukh-admin> get-module -list
ModuleType Name
ExportedCommands
Manifest ADRMS
Manifest AppLocker
Manifest BestPractices
Manifest BitsTransfer
Manifest FailoverClusters
Manifest PSDiagnostics
Manifest ServerManager
Manifest TroubleshootingPack {}
Manifest WebAdministration
I'll have to google on how to import a module.
Gurmukh

Windows O/S running in the virtual machine has frozen does not want to shut down

Our old Windows-based PC is a virtual machine on our iMac (it is accessed using VMWare Fusion 2). The Windows XP Home Edition O/S froze when booting, and cannot be shut down by sending a Ctrl-Alt-Del or Force Quitting VMWare Fusion. Putting the iMac in Sleep mode or restarting it makes no difference. The virtual machine is still in a suspended state, and there appears to be no way of either getting it to finish booting the Windows O/S or shutting it down. Any ideas as to how to unfreeze it? At this point in time, all I want to do is get back into the Windows side, rescue any data files I need, and stop using the virtual machine.

VMware Fusion issues should be posted in the VMware Fusion forums:
http://communities.vmware.com/community/vmtn/desktop/fusion?view=discussions
That said, you can "Force Shut Down" a virtual machine by holding down the Option key, then clicking on the Virtual Machine Menu. "Shut Down" becomes "Force Shut Down".
More than likely what you'll need to do is hold the Option key, then choose "Force Restart" to get Windows to boot again. Then use "Force Shut Down" to power off the VM, if a normal shut down does not work after that. Do NOT close the VM window, or put the Mac to sleep as this will initiate another suspend procedure.

How to resolve this issue in windows 7 ?? "An Internal Virtual Machine error (3) has occurred. The virtual machine will reset now."

Dear Friends,
Do kindly help me out on this issues. I have installed Microsoft Virtual PC 2007 in my PC and i am trying to create an new virtual machine for several testing. I have a clean ISO image of windows 7 . I import through Captured ISO option. The system tries
to configure the OS . But during the configuration i am getting this error.
*Your PC needs to Restart.
Please hold the power button.
Error Code: 0X0000005D
Parameters:
0x03063A09
0x756E6547
0x49656E69
0x6C65746E
An Internal Virtual Machine error (3) has occured.
The virtual machine will reset now.
I have Enabled the virtualization settings in BIOS.
Kindly help me out to resolve this issue.
Base Machine Platform : Windows 7 - 32 Bit and Windows 7 - 64 Bit.
ISO Image : windows 7 - 32 bit.

Error Code: 0x0000005D: Your
CPU is not compatible.
Ref : http://www.winvistatips.com/internal-virtual-machine-error-3-has-occurred-t520964.html
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

I had creative cloud installed in a parallels deskto virtual machine on my mac, I delete the virtual machine without deactivate the creative cloud. after reinstall a new VM running windows 8.1. pro 64 bits, I downloaded the creative cloud installer but it

I had creative cloud installed in a parallels deskto virtual machine on my mac, I delete the virtual machine without deactivate the creative cloud. after reinstall a new VM running windows 8.1. pro 64 bits, I downloaded the creative cloud installer but it does not install ang give an Error code 72, it is assuming that I already are using the Creative cloud in 2 computer, but itis no the case, how to solve this situation?

Dave: I did the Microsoft Update two days before this happened, and rebooted as required. I just created a new restore point and lauched Creative Cloud. Now I get the famous white screen:
It just sits and spins (been 10 minutes now).
Fortunately, I saved away this command (which I've had to use 4 or 5 times already):
del %USERPROFILE%\AppData\Local\Adobe\OOBE\opm.db
Unfortunately now, I get this (even after closing the above window):
The process cannot access the file because it is being used by another process.
So I killed everything that said "Adobe" in the task manager and this time, the command succeeded.
Fortunately, the current apps seem to still work. I can't seem to find the "Creative Cloud" app in the applications on my system, but I launched Photoshop CC, told it to look for updates, and got a list of the 5 prgorams that need updates in the Adobe Application manager:
I will proceed with the updates, holding my breath.

�Unable to create the virtual machine. The error was -4�

I have a VS2003 C# application, which call JACE (a JNI wrapper) through C++ mixed mode to use JAVA object�s functions.
Because the natural of our JAVA program it must be able to reach maximum heap size of 512MB, we set it during the startup of JVM by using �-Xmx512M� parameter.
It worked well with a small PC (Dell Optiplex GX750 and Shuttle Xpc ) with only 512MB physical memory. We have about 50 machines running the application in the production.
Recently, one of our customers installs the application to a larger PC ( Shuttle Xpc with different model), which has 1 GB of physical memory. The application started throw exception from JVM. The error message is �Unable to create the virtual machine. The error was -4�. I checked with JNI return code and found that -4 mean �not enough memory�.
I did some experiment by running the application with 2GB PC, 1 GB PC, 1GB laptop, 512MB PC. I don�t found relationship between how much �maximum heap size� can be assigned and how much �physical memory� is available (reading from task manager). The 2GB machine can take only 128MB of �maximum heap size� However, 1GB machine can take up to 300MB of �maximum heap size�.
I also use program like ImageJ (http://rsb.info.nih.gov/ij/) to test maximum heap size for it. I found that ImageJ can take 512MB maximum heap size without problem. It can even take 1024MB of maximum heap size.
I have created a small program to duplicate this problem. Although it use exact the same code to start JVM up, it can go up to 650MB heap size for both 2GB and 1GB PC.
This is puzzling. Does anyone know what are factors determine how much �maximum heap size� can be set for JVM from JNI?
Software used
Windows XP SP2
Visual studio.net 2003 SP1 (the problem also occurred without SP1)
.NET Framework 1.1 SP1
JACE 1.1rc1_05
JRE 1.5.07 (also tested with JRE 1.5.09 and 1.6.0 beta)

Do you resolve the problem? If so what was the fix?
I have been getting the Java Virtual Machine Launcher error message Could not create the virtual machine when attempting to run an Oracle application that uses JNLP via a browser. Even clicking on componets such as javaw.exe produces the error message. In conjunction with receiving the error message, the application that I am working with will not launch.
I had JRE 5u10 and J2RE 1.4.2u13 installed and thought that installing JDK 5u17 may resolve the issue. I removed JRE 5u10 and J2RE 1.4.2u13 and installed JDK 5u17 (and the included JRE 5u17.) The error message was still there.
I have unistalled (via Add/Remove programs) and reinstalled (via both Win off-line and on-line) JDK 5u17 and JRE 5u17 many times.
During the uninstalls I have received a Java Web Start 1.5.0_17 bad installation error invoking JVM error message.
I have restarted the machine also.
There are some remains of J2RE 1.4.2u13 still on the machine even after the 1.4.2u13 uninstall. The Java\j2re1.4.2_13\lib folder remains.
I am running Win XP SP2 and IE6 SP2.
Note: I cannot use Java 6 since the application that I am working with is Java 5 based.

Expanding the virtual machine max memory in osx

i just upgraded the memory on my power mac because this java program im using requires alot of memory on the heap. i remember on windows, there is a property file u can tweak to increase the max memory used by the virtual machine, im just wondering if you can do the same with osx (10.2)

Yes - it's in Applications/Utilities and it's called Terminal. Default shell is tcsh but you can download bash and configure it to use that - there are probably other shells out there too.

Hyper-V - 'Failed to start the virtual machine 'test' because one of the Hyper-V components is not running.'

Hi all,
Having a bit of a nightmare with Hyper-V on my Windows 8 Pro laptop - Whenever I create a new VM and try to start it I receive the following error;
'Failed to start the virtual machine 'test' because one of the Hyper-V components is not running.'
I sometimes also receive an error saying something along the lines of 'Unable to change virtual machine state'
I have done a lot of searching a seen two common answers - The first is to try removing the Hyper-V role and re-adding it - I have tried this several times to no avail. (Intel VT and all virtualisation capabilities are enabled in BIOS). The second issue
it would seem
some people have had relates to editing the VMX configuration file and adding the line
hypervisor.cpuid.v0 = "FALSE" - I thought VMX files were only present in VMware Virtual Machines...
Any help would be greatly appreciated.
Many thanks in advance.
James

The hypervisor event log message is generated only at boot - so this would be expected. Also vmbus should not be running on the host (I was looking at a VM yesterday)... This error message is generated only when the vid is determined not to be
running or cannot communicate with the hypervisor.
I have seen this due to anti-virus software in the past or due to driver verifier being configured. Since it looks like you checked driver verifier already do you have anti-virus software installed? If so have you followed the best practices
and exempted the Hyper-v services?
http://technet.microsoft.com/en-us/library/dd283088(WS.10).aspx
To resolve this problem, configure the real-time scanning component within your antivirus software to exclude the following directories and files:
Default virtual machine configuration directory (C:\ProgramData\Microsoft\Windows\Hyper-V)
Custom virtual machine configuration directories
Default virtual hard disk drive directory (C:\Users\Public\Documents\Hyper-V\Virtual Hard Disks)
Custom virtual hard disk drive directories
Custom replication data directories, if you are using Hyper-V Replica
Snapshot directories
Vmms.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
Vmwp.exe (Note: This file may have to be configured as a process exclusion within the antivirus software.)
-Taylor Brown<br/> -Program Manager, Hyper-V<br/> -http://blogs.msdn.com/taylorb

[SOLVED] VMPlayer error: 'The virtual machine is busy'

Hello,
I encounter an error when I try to open my Windows XP virtual machine. VMPlayer say me that 'the virtual machine is busy', but there aren't others virtual machines that are already running.
I try to find a fix on google, but it seams that usually this bug is related on the file /etc/vmware/not_configured. This is not my case, because I haven't this file.
I'm running Arch 32-bit with the official Arch kernel 3.0. I already patched my VMPlayer with this solution that I've found on the wiki:
# sed 's/\x83\xe8\x03\x83\xf8\x01\x0f\x96\xc0/\x83\xe8\x02\x83\xf8\x01\x0f\x96\xc0/' -i /usr/lib/vmware/lib/libvmware-modconfig-console.so/libvmware-modconfig-console.so
# sed 's/\x83\xe8\x03\x83\xf8\x01\x0f\x96\xc0/\x83\xe8\x02\x83\xf8\x01\x0f\x96\xc0/' -i /usr/lib/vmware/lib/libvmware-modconfig.so/libvmware-modconfig.so
Last edited by I am Gianluca (2011-10-02 16:26:46)

Just a few things to do, I have no miracle solutions.
Try to reset vmware to default. remove the ~/.vmware directory. Are you sure vmware is correctly installed? Try to reboot to be sure that there is no weird daemons in the background. Can you run vmware at all (try to create a new virtual machine that you attach to a bootable CD image). As a last resort I would remove everything except the hard disk (the vmdk file(s)), recreate a virtual machine and reattach the hard disk.
I also rn vmware but I have installed the lts kernel. This is a 2.6.32 kernel and so there is no need to apply weird patches to vmware. But I cannot say it is related to that.

Cannot start Hyper-V virtual machine

Hi,
I have a Windows 2008 Server. It has been now upgraded to Windows 2012. Everything was working fine. But, now I turned off the virtual machine and copied the VHD file to another drive for backup. After this, I am not able to start the old virtual machine.
(The VHDs are in place. I only copied them) However, two another virtual machines are running now without any problem. While trying to start, I am getting the error "the operation cannot be performed while the object is in its current state". These are
critical server. Any quick thoughts?
Thanks
Tom Jacob

Hi,
If possible please restart the Hyper-V host server, then check whether still has such issue.
If issue still there, launch Event Viewer, check Hyper-V related logs. Post the logs for further troubleshooting.
And I notice you mentioned turned off the virtual machine, do you mean the VM running well in the past? (I mean after you upgrade server to Windows server 2012)
Can you export the VM now? Export it then delete the VM from Hyper-V, import the VM again and check the result.
For more information please refer to following MS articles:
Hyper-V: Can’t delete Virtual Machine with ‘Opertion cannot be performed while the object in current state’
http://blogs.technet.com/b/chrad/archive/2010/06/24/hyper-v-can-t-delete-virtual-machine-with-opertion-cannot-be-performed-while-the-object-in-current-state.aspx
Operation is not valid due to the current state of the object
http://social.technet.microsoft.com/Forums/en-NZ/ilm2/thread/0646a166-67b1-4322-ba9a-77e3e3ced31d
Lawrence
TechNet Community Support

How to Fix: Error (10698) The virtual machine () could not be live migrated to the virtual machine host () using this cluster configuration.

I am unable to live migrate via SCVMM 2012 R2 to one Host in our 5 node cluster. The job fails with the errors below.
Error (10698)
The virtual machine () could not be live migrated to the virtual machine host () using this cluster configuration.
Recommended Action
Check the cluster configuration and then try the operation again.
Information (11037)
There currently are no network adapters with network optimization available on host.
The host properties indicate network optimization is available as indicated in the screen shot below.
Any guidance on things to check is appreciated.
Thanks,
Glenn

Here is a snippet of the cluster log when from the current VM owner node of the failed migration:
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RHS] Resource Virtual Machine Configuration VMNameHere called SetResourceLockedMode. LockedModeEnabled0, LockedModeReason0.
00000b6c.00001a9c::2014/02/03-13:16:07.495 INFO [RCM] HandleMonitorReply: LOCKEDMODE for 'Virtual Machine Configuration VMNameHere', gen(0) result 0/0.
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RHS] Resource Virtual Machine VMNameHere called SetResourceLockedMode. LockedModeEnabled0, LockedModeReason0.
00000b6c.00001a9c::2014/02/03-13:16:07.495 INFO [RCM] HandleMonitorReply: LOCKEDMODE for 'Virtual Machine VMNameHere', gen(0) result 0/0.
00000b6c.00001a9c::2014/02/03-13:16:07.495 INFO [RCM] HandleMonitorReply: INMEMORY_NODELOCAL_PROPERTIES for 'Virtual Machine VMNameHere', gen(0) result 0/0.
00000b6c.000020ec::2014/02/03-13:16:07.495 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine Configuration <Virtual Machine Configuration VMNameHere>: Current state 'MigrationSrcWaitForOffline', event 'MigrationSrcCompleted', result 0x8007274d
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine Configuration <Virtual Machine Configuration VMNameHere>: State change 'MigrationSrcWaitForOffline' -> 'Online'
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine <Virtual Machine VMNameHere>: Current state 'MigrationSrcOfflinePending', event 'MigrationSrcCompleted', result 0x8007274d
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine <Virtual Machine VMNameHere>: State change 'MigrationSrcOfflinePending' -> 'Online'
00000e50.00002080::2014/02/03-13:16:07.510 ERR   [RES] Virtual Machine <Virtual Machine VMNameHere>: Live migration of 'Virtual Machine VMNameHere' failed.
Virtual machine migration operation for 'VMNameHere' failed at migration source 'SourceHostNameHere'. (Virtual machine ID 6901D5F8-B759-4557-8A28-E36173A14443)
The Virtual Machine Management Service failed to establish a connection for a Virtual Machine migration with host 'DestinationHostNameHere': No connection could be made because the tar
00000e50.00002080::2014/02/03-13:16:07.510 ERR   [RHS] Resource Virtual Machine VMNameHere has cancelled offline with error code 10061.
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] HandleMonitorReply: OFFLINERESOURCE for 'Virtual Machine VMNameHere', gen(0) result 0/10061.
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] Res Virtual Machine VMNameHere: OfflinePending -> Online( StateUnknown )
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] TransitionToState(Virtual Machine VMNameHere) OfflinePending-->Online.
00000b6c.00001a9c::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] rcm::QueuedMovesHolder::VetoOffline: (VMNameHere with flags 0)
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] rcm::QueuedMovesHolder::RemoveGroup: (VMNameHere) GroupBeingMoved: false AllowMoveCancel: true NotifyMoveFailure: true
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] VMNameHere: Removed Flags 4 from StatusInformation. New StatusInformation 0
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] rcm::RcmGroup::CancelClusterGroupOperation: (VMNameHere)
00000b6c.00001a9c::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000021a8::2014/02/03-13:16:07.510 INFO [GUM] Node 3: executing request locally, gumId:3951, my action: /dm/update, # of updates: 1
00000b6c.000021a8::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.00001a9c::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000022a0::2014/02/03-13:16:07.510 INFO [RCM] moved 0 tasks from staging set to task set. TaskSetSize=0
00000b6c.000022a0::2014/02/03-13:16:07.510 INFO [RCM] rcm::RcmPriorityManager::StartGroups: [RCM] done, executed 0 tasks
00000b6c.00000dd8::2014/02/03-13:16:07.510 INFO [RCM] ignored non-local state Online for group VMNameHere
00000b6c.000021a8::2014/02/03-13:16:07.526 INFO [GUM] Node 3: executing request locally, gumId:3952, my action: /dm/update, # of updates: 1
00000b6c.000021a8::2014/02/03-13:16:07.526 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000018e4::2014/02/03-13:16:07.526 INFO [RCM] HandleMonitorReply: INMEMORY_NODELOCAL_PROPERTIES for 'Virtual Machine VMNameHere', gen(0) result 0/0.
No entry is made on the cluster log of the destination node.
To me this means the nodes cannot talk to each other, but I don’t know why.
They are on the same domain. Their server names resolve properly and they can ping eachother both by name and IP.

Cannot Power On the virtual machine

Similar Messages

Maybe you are looking for