Cannot see the StockPortal after adding a new portlet
hello,
I tried to create a new protlet using EBCC for which I
1) Created a jsp page and deployed it in a folder in the protlet directory
2) Saved the settings after pointing the portlet content to the newly
created jsp
3) Then synchrinised the setting using the synchronise option
but as soon as i tried to access the stock portal again it gave me the
following error which was not there before i created synchronised the
portlet.
PortalPersistenceManager: portal 'portal/stockportal' not found
<Jan 7, 2002 12:08:45 PM IST> <Error> <HTTP>
<[WebAppServletContext(20589738,sto
ckportal,/stockportal)] Servlet failed with ServletException
javax.servlet.ServletException: Received a null Portal object from the
PortalMan
ager.
at
com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.setupPo
rtalRequest(PortalWebflowServlet.java:194)
at
com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(P
ortalWebflowServlet.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
at
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispat
cherImpl.java:215)
at
weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112
at jsp_servlet.__index._jspService(__index.java:92)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:304)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2459)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
thanks in advance
akshay
Hi Akshay,
It looks like for some reason the data sync was not completed properly.
Prior to doing the data sync, make sure the correct application is running
(e.g., if you are sync'ing to stockportal, make sure you started the server
using <portal-home>\config\portalDomain\startPortal.bat). Make sure you
have opened the correct application in the EBCC, and make sure your
connection settings are correct -- the application name and server
information are set under Tools/Connection Settings. When you do the data
sync, make sure you use the correct userid and password (e.g.,
system/weblogic).
You can check to see what data has been synchronized by using the Data
Repository Browser application. To view what applications the target server
is able to see, open the data repository browser by entering this URL into
your Web browser: http://localhost:7501/portalDataSync/index.html (assuming
you are using the portalDomain).
A good place for documentation on this is "How Application Data is Organized
and Distributed" at
http://e-docs.bea.com/wlp/docs40/deploygd/appdata.htm#1092675. Also see
"Verifying Your Synchronization" at
http://e-docs.bea.com/wlp/docs40/portal/adminovi.htm#1042376.
I hope this helps. If you are still experiencing problems with this, please
feel free to open up a support case at http://support.bea.com/welcome.jsp.
Ginny Peterson
Developer Relations Engineer
BEA Support
"akshay" <[email protected]> wrote in message
news:[email protected]...
hello,
I tried to create a new protlet using EBCC for which I
1) Created a jsp page and deployed it in a folder in the protlet directory
2) Saved the settings after pointing the portlet content to the newly
created jsp
3) Then synchrinised the setting using the synchronise option
but as soon as i tried to access the stock portal again it gave methe
following error which was not there before i created synchronised the
portlet.
PortalPersistenceManager: portal 'portal/stockportal' not found
<Jan 7, 2002 12:08:45 PM IST> <Error> <HTTP>
<[WebAppServletContext(20589738,sto
ckportal,/stockportal)] Servlet failed with ServletException
javax.servlet.ServletException: Received a null Portal object from the
PortalMan
ager.
at
com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.setupPo
rtalRequest(PortalWebflowServlet.java:194)
at
com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(P
ortalWebflowServlet.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
at
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispat
cherImpl.java:215)
at
weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112
at jsp_servlet.__index._jspService(__index.java:92)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:304)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2459)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2039)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
thanks in advance
akshay
Similar Messages
-
Cannot see the array after power failure
Hi,
today, after a power failure overnight, my XServe G4 cannot see the XServe RAID plugged in.
I've reset each controller (but I use just the first), done everything, but I cant still get mount the RAID on desktop. With RAID Admin the RAID seems to be functional, exceps for the "array", that I can't see. If i click on the drives, the RAID Admin say to me that's SPARE DISK (sic!). In the Utility windows I've tried to rebuild the array, verify the array, try to recognize the array, but everytime the button is greyed out, and I can't start the rebuild. Utility Disk don't see the RAID at all.
TIA to all Apple SysAdm that would helpI think your best option here is to contact AppleCare, to see if they have suggestions that can help.
Are you running the 1.5 firmware on the Xserve RAID itself? -
I have an iphone 4 and an HP Pavillion with windows 7. I always have been able to connect my iphone to my laptop and open
the DCIM folder and see the picture icons so I can pick the ones I want to download. After upgrading to iOS8 I cannot see the icons after a
few seconds of connecting the phone to the computer. They all turn into the windows icon.
I do not want to try the icloud for windows control panel unless I can pick the pictures that will be transferred. I don't want all the pictures I take on my computer.http://support.apple.com/kb/HT1808
-
My MacBook Pro 2.33GHz cannot see the New Airport Extreme
Just bought the new Airport Extreme(Wireless N). Power it up, cannot see the new wireless network under the Airport signal icon. The Machine have no problem using my older Netgear wireless router(G) and the new Linksys Wire router(N). Just connot see the new Apple Airport Extreme.
My the other two iMac(G5 and Intel) 20" can see all three wireless network and connet to them without any problem.
My only question is has Apple implement any "regional code" on the hardware. My MacBook Pro is from US and the new Airport Extreme was bought in New Zealand.
Any suggestion? BTW a clean install of the System didn't help. Found out after 2-3 hours of installation of System and all my Application back.To use the Airport Utility you must select your network under that Airport icon but you can't. So what to try? Of course you may need to reset your router. If still not visually seen under Airport then go to system preferences/network/status and choose Airport. Look for the preferred drop down menu. If network is seeen then select it and hit apply. Then select under Airport icon then use the Airport Utility. If not seen in preferred then type in your network exact name or use the + button. The above will work you just need to keep trying.
-
What is the expected behavior in a zone after adding a new static route in Solaris 10....
Hi Folks,
I have a few Solaris 10 production machines here at work and had a strange thing happen. I added a new route to these machines using the "add route <destination > <gateway>" command and my web applications running in the zones on these machines froze up. The applications that froze had no reason to do this as they have never talked to the machine in this new route. Here is the old route table via netstat -rn:
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
172.23.248.0 172.23.248.24 U 1 6794 bge1
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.74 U 1 7980 bge0
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 34
172.28.0.0 172.23.248.100 UG 1 9
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 44
172.26.0.0 172.23.248.100 UG 1 934
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 82
172.23.0.0 172.23.248.100 UG 1 161975
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 82
10.0.0.0 172.23.248.100 UG 1 1766
224.0.0.0 204.154.129.74 U 1 0 bge0
default 204.154.129.1 UG 1 8411
127.0.0.1 127.0.0.1 UH 225713773 lo0
Here is the route table after I added my one additional route (note the top line):
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
204.154.129.209 172.23.248.100 UGH 1 5
172.23.248.0 172.23.248.28 U 1 5757 bge1:3
204.154.126.0 172.23.248.100 UG 1 0
204.154.127.0 172.23.248.100 UG 1 0
204.154.134.0 172.23.248.100 UG 1 0
204.154.135.0 172.23.248.100 UG 1 0
204.154.132.0 172.23.248.100 UG 1 0
204.154.133.0 172.23.248.100 UG 1 0
204.154.130.0 172.23.248.100 UG 1 0
204.154.131.0 172.23.248.100 UG 1 0
204.154.128.0 172.23.248.100 UG 1 0
204.154.129.0 204.154.129.86 U 1 484 bge0:2
204.68.180.0 172.23.248.100 UG 1 0
204.68.181.0 172.23.248.100 UG 1 0
192.168.0.0 172.23.248.100 UG 1 114
172.28.0.0 172.23.248.100 UG 1 2
172.29.0.0 172.23.248.100 UG 1 0
172.30.0.0 172.23.248.100 UG 1 0
172.31.0.0 172.23.248.100 UG 1 0
172.24.0.0 172.23.248.100 UG 1 0
172.25.0.0 172.23.248.100 UG 1 43
172.26.0.0 172.23.248.100 UG 1 944
172.27.0.0 172.23.248.100 UG 1 0
172.20.0.0 172.23.248.100 UG 1 0
172.21.0.0 172.23.248.100 UG 1 0
172.22.0.0 172.23.248.100 UG 1 77
172.23.0.0 172.23.248.100 UG 1 160823
172.16.0.0 172.23.248.100 UG 1 0
172.17.0.0 172.23.248.100 UG 1 0
172.18.0.0 172.23.248.100 UG 1 0
172.19.0.0 172.23.248.100 UG 1 0
10.0.0.0 172.23.248.100 UG 1 183
224.0.0.0 204.154.129.86 U 1 0 bge0:2
default 204.154.129.1 UG 1 1850
127.0.0.1 127.0.0.1 UH 58 225894 lo0:3
My question is why did my application die and need to be restarted after this one simple route was added? What is the expected behavior in a zone after adding a new route to the root zone?
Thanks,
Tom Gellert
tom.gellert@tellabs.comGreg- Dreamweaver CS4/Live View integration with BrowserLab allows you to send interactive states of a local site/design directly to BrowserLab (dynamic data, rollover/mouse interaction states, widget states, et al), and from behind firewalls no less- definitely a scenario we covered. You can get the extensions (which require Dreamweaver CS4, of course) up on the Labs site: http://labs.adobe.com/technologies/browserlab/
-
I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites. I was able to get window open from the help "window" and open sites from there just not from new: window tab or bookmarks those stay invisible? I tried the help suggestions, safemode,etc.
Hi CMorenoOT,
This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. You'll want to run through the additional steps to setup your country, and payment information.
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/HT2731
Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
- Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
- Once you've filled out all of the fields for your billing information, tap Next.
For more information:
Using an existing Apple ID with the iTunes Store and Mac App Store
http://support.apple.com/kb/HT2589
Thanks,
Matt M. -
After Upgrade to IOS 6.1 also with "find my iPhone" app, the map when locate my iphone cannot see the street or city, especially in China, can we change back to google map in this app?
If the map cannot show details, how can we find my iphone? And it seem Apple just have an good idea for customer only but it is not function, why need to use Apple map in "Find my Iphone" if we all know it is not a good map!
So stupid Apple!!!!!https://itunes.apple.com/us/app/google-maps/id585027354?mt=8
It won't help find your iPhone, however. -
Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an I-Tunes software update, but I am not sure. Is this likely a software issue or is the shuffle not working correctly?
Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an I-Tunes software update, but I am not sure. Is this likely a software issue or is the shuffle not working correctly?
-
I have just opened 2 new albums in photo but cannot see the albums thru' itunes when syncing my ipad or thru' the screen saver on ITV . My photo apps is Version 1.0 (209.52.0)
Have you tried deleting the photo cache from your computer and then re-trying the photo sync and see if they all then copy over (you need to select and sync all the photos that you want on the iPad together in one go, as only the most recent photo sync remains on the iPad) ? The location of the cache, and how to delete it, is on this page http://support.apple.com/kb/TS1314
Don't know about the Facebook photo emailing, but there are a number of apps that allow to upload photos to their site (e.g. the 'official' Facebook app).
(For future info, typing all in capitals is considered SHOUTING - you are more likely to get help/responses if you don't.) -
QUESTION : when I log into hotmail on my new ipad, I only see inbox where I retrieve my messages but cannot see the word ''New'' which would
allow me to send emails the way it would be on a desk pc. So I can retrieve my messages but cannot send ???
Thank you in advance for help.The icon in the upper right of the screen (assuming you are using the Mail app) that looks like a square with a pen is the new message button. Tap that to create a new mail message.
-
Cannot see the components in ESS after import it into CBS
Hi all:
After we import ESS 100 ( in ECC ) into JDI. Then in NWDS we can see the configuration, but we cannot see the components inside the ESS repository.
In CMS - Transport Studio, we have done the check-in, Development, Consolidation, there are all sucessful.
Anybody can give us some help ?Hi Jain.
In Development Configurations Perspective
Inactive DCS
I cannot see the design components which I import from CBS
Another question is I meet with problem when I try to activate this ESSTrack in Activation View .
Retrieving pending activities failed: CBS Server Error: The compartment for given software component is being initialized( internal code: BS_SC_META_DATA_NOT_AVAILABLE) -
I am setting up a new computer. I've installed and signed into Adobe Digital Editions, but cannot see the ebooks I have purchased.
Moving this discussion to the Downloading, Installing, Setting Up forum.
Ninaa43224110 what version of Illustrator are you installing? Are you using the serial number registered under your account at http://www.adobe.com/? For information on how to locate the registered serial number under your account please see Find your serial number quickly. -
New install Express on Win 8 can see the Server name but cannot see the instance
I am doing this over the phone with a client who is not sure what he is doing we have installed Ok the folders exist and we have enabled TCP/IP
The instance is MSSQLServer when we try to connect all we get is 'ComputerName' I am expecting 'ComputerName \MSSQLServer'
The user does not have administrator rights and he installed SQL Server without the administrator (I think, I am not sure he knows)
I am looking for clues as to what may cause the instance name to not appear
thanks in advance
jncThanks, that is useful but the list of instances just matches the details in SQL Configuration manager
What I need is to understand why, if the server is listed and is running it is not visible when we try to connect
jnc
Hi jnc,
Could you please verify that if the instance name is not listed in “Server name” drop-down list of SQL Server Management Studio (SSMS)? If so, does the instance list in the Local Servers tab in the “Browse for Servers” dialog?
If you cannot see the express instance in the Local Servers tab in the “Browse for Servers” dialog, the reason may due to SQL Server cannot get the appropriate registry entry information in the System Registry (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
SQL Server\Instance Names).
To work around this issue, you can manually input the instance name which will be show in the Local Servers tab. Also make sure that right click on SSMS and then choose “Run As Administrator” to start it.
However, if the express instance is listed in the Local Servers tab in the “Browse for Servers” dialog, but not in the “Server name” drop-down list. Then if you have never connected with the instance name before, its entry will not listed in the drop-downlist.
Or if you have connected to server with a wrong instance name, you cannot see its entry the next time.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
I cannot see the downloaded item in the downloads screen after the download is complete
This started from the previous release I guess... I cannot see the downloaded item... for example when I tried to download the latest adobe flash player ... it showed the message the download was successful... but the download screen did not have any item listed.
* Tools > Options > Privacy > History: Firefox will: "Use custom settings for history" > "Remember download history"
-
I jumped on my parents computer, which is on a domain. I added a new local user(with my live.com login) and gave it admin status. That's when the trouble began.
The main user profile disappeared. I used the command prompt fix (see other fixes) to add the missing user back into admin. I logged back in, and it set up the account for the first time (WTF?). I cannot access any files from the main account
(that I logged into just fine before to get this debacle started.)
When going to Local Computer Management --> System Tools, my users and groups tool is missing.
I ran lusrmgr.msc only to find out that the most current version of Windows 8.1 and this is what it said "This snapin may not be used with this edition of Windows 8.1. To manage user accounts for this computer, use the User Accounts tool in the
Control Panel." <---- Awesome! (that was sarcasm.)
I have spent over two hours in the User Account tool during the course of this problem only to prove that a picture of a computer is more useful that that "tool".
To anyone reading this ticket, the best advice I can offer you (as long as its not a crucial machine) is to back up what you can gain access to, format your hard-drive and reinstall windows and start over again. I wouldn't recommend reinstalling 8.1,
I would say go back to 7 and wait until 10 comes out. Windows 8 is the new Vista. Good luck!Hello AhavahOlam,
I can understand your feelings.
If my understanding is right, after adding a new local user in domain-joined Windows 8.1, you can’t open the local users and groups.
Can you still add account by going to Control Panel\User Accounts and Family Safety\User Accounts\Manage Accounts?
As this computer is domain-based, it is recommended to contact the domain administrator to see if the option is blocked.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support
Maybe you are looking for
-
Hi, I have the problem which iTunes cannot detect my iPhone 4s. I tried the steps you have provided in your troubleshooting, but it won't work for me because the Apple Mobile Devilce is perfectly installed on my windows. However, the driver "Microsof
-
Error while opening Cfolder URL Link.
Hi, I get BSP error while opening cfolder URL link in BID Invitation Header data --> Document tab and click on the hyperlink for the cfolder. Following is the BSP error. Business Server Page (BSP) error What happened? Calling the BSP page was termina
-
i had just updated imovie to 10.0.2. While attempting to import clips from my camera the computer froze so I tried to eject the usb cord hooked to my camera. Even though it said it was OK to do so, when I pulled it out I got a message it was done pre
-
[SOLVED] Error occuring while enabling extension
Hey all, I've been using OpenOffice 3 (openoffice-base beta and devel and stable now) and have tried to install the Sun Presenter Console, but I get the following error: % /opt/openoffice/program/unopkg add -v sun-presenter-screen-linuxintel.oxt ERR
-
I would like to know where can I find the instruction to install Oracle 10G on a Win XP machine. I have the following disk: 1. - Oracle DB 10G Rel 3 (10.1.0.2) Windows 32 Bits 2. - Oracle 10G Client And I would like to know if I need to install both