Canon XL-H1 capture and monitor playback not working

Yes...that's right...I am asking a question.
I have been doing some shooting with the Canon XL-H1. So that I can actually say that I have shot and worked with HDV footage. And so I can test the Matrox MXO with HDV footage. Shooting has been fun, but now it comes to time to capture the stuff...or even play it back on my HD monitor, and for the life of me it isn't working.
Yes...I read the manual. In fact, that is one of the reasons I am writing.
In the manual, on page 98, it says to play back the footage I need to pres MENU, go to the SIGNAL SETUP option and choose PLAYBACK STD and set it to the format that I have been shooting, DV or HDV. Well, that option is greyed out...I cannot access it. Same thing for capturing, I need to set this to the format I shot to capture it, but it isn't available. It won't let me select it.
Any ideas why?
APPLE, ARE YOU LISTENING!?!
Shane

it'll play back if you shoot at 29.97 thru the sony but won't play back thru sony if you shoot at 24. The only way I can keep TC is to bump it to DVCProHD tape, then use the HD deck to injest via HDSDI. for cheap clients TC is out the window, or they may just need a few shots or pickups and they'll line it up visually. what I want to try next time it's used in house is come off the hdsdi spigot to a Panasonic HD Deck @ 1080i. The Canon rep says the optical block is full HD passed to the HDSDI spigot, only becomes HDV when it hits tape. I'd like to test see if it's smoke and mirrors or what. goal is to compare oranges to oranges.
set up chip charts focus charts and the like do some pans zooms see if we can see a difference between the dvcproHD tape and the HDV tape HDSDI in. Just a want to know thang.

Similar Messages

  • Canon Pixma MP-540 (and other) does not work with Cups 1.4

    Since Cups 1.4 my printer does not work
    its 100% about Cups 1.4 beceause after an downgrade to 1.3 it worked perfect. After upgrade to 1.4 again nothing worked.
    So my question, could there be maybe a package called cups-legacy. I heard about other Canon printers + non canon printers which not work with Cups 1.4 in case of binary distributed drivers

    I had a similar problem with my MP780 and solved it by adding a custom udev rule. See http://wiki.archlinux.org/index.php/Cup … ermissions. This is my udev rule:
    SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTR{idVendor}=="04a9", ATTR{idProduct}=="1707", GROUP:="lp", MODE:="0660"
    and lsusb output:
    Bus 001 Device 003: ID 04a9:1707 Canon, Inc. PIXMA MP780 Scanner
    . Hopefully this will be fixed by hal/devicekit/udev upstream but it all seems a bit of a jumble atm, to me anyway.

  • UCCX: Silent monitoring is not working and recorded file is also not playing

    Hi,
    Running UCM 8.5 cluster with UCCX 8.5.
    In CSD, silent monitoring is not working.
    Windows XP OS is running on supervisor desktop. when i select the agent
    then the silent monitoring icon will highlighted once i click on the icon,
    after 5-7 seconds i am getting an error "Silent monitoring session has
    failed".
    Not able to playback the recorded files:
    I can able to record and the file size is 2.6mb for approximate 3min
    recording.When i tried to play from supervisor record viewer it is playing
    but no voice is coming. And i downloaded using play & save option and
    tried to play the .wav file but i can't hear any voice.
    Problem is while playing back the recorded file. I can able to see the
    recorded files in the UCCX.
    Please help me out!!!
    Thanks & Regards,
    Krishna

    It's likely the same problem: CAD is not forwarding packets to CSD or the CCX recording service. Two common causes for this are:
    The phone is not spanning to the PC port or does not allow PC Port VLAN Access. Change these options to true on the phone's configuration in CUCM.
    The NIC of the agent's PC running CAD is not processing 802.1q-tagged Ethernet frames. It must not drop these and pass them into the Windows NDIS stack for CAD to get them. Google is your friend here; this commonly requires registry changes to make the NIC process the packets.

  • I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchas

    I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchased, and am paying monthly for my creative cloud for photography. Please help

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Power Settings, computer and monitor will not go to sleep

    My computer and monitor will not go into sleep mode enventhough I have the power options set to do so in 30 minutes

    Hello @Andrea1023,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that your computer is not going into sleep mode when it is supposed to, but before and you require assistance. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • My new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

    my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare. They will help you.
    Best.

  • HT6065 I have a problem with my Mac book pro, my external monitor is not working and i need it to do my business. Please can someone help me with this.  I am running windows 8 on parallels.

    Since I have up dated my Macbook pro, my external monitor does not work. Who can help me

    It was working untill i did the update

  • My w2207h HP Monitor is not working on my macbook pro with hdmi minidisplayport adapter. On Windows 7 via bootcamp it works. What can i do ?

    As is said my HP w2207h monitor is not working with a minidisplayport to hdmi adapter and a hdmi cable which is working fine for my PS3. So the cable is not the problem. And on my TV i also have no problems at all activating a second monitor. Therefore the adapter isnt the problem either. When i plug it in the typical bluescreen appears. Then after a few seconds it appears again and there is no second monitor recognized. I also used the "recognize Monitor" button without success. Please help me, are there any special drivers or something like that ?
    PS: bought a high end expensive adapter now because the old one was very cheap. But didnt help. Still stuck on the macbook not recognizing anything !

    If you have an external drive you can hook up to the MacBook Pro I believe there *may* be a solution by getting an image to the MacBook Air.
    On the MacBook Pro with the Windows install disk in the DVD drive fire up disk utility.  Select the DVD and then hit the "New Image" button.  Disk Utility should offer to create a disk image from the DVD.  I would put that disk image on a USB drive connected to the Pro.  You should be able to mount that image when you connect up to the Air.  Hopefully BootCamp will be able to access that all through the process.
    If that doesn't work (the drivers don't recognize the disk image once Windows gets underway for its install), you might try copying the installation files from the DVD to FAT32 formatted USB stick or drive and then using that to install Windows.  I would expect Windows would be able to see the USB FAT32 drive and I don't believe any file on the drive is going to go beyond 4GB. 
    I haven't actually tried BootCamp on the Air, since I just use VMWare which has no issue installing from anything OSX can see.  But BootCamp is going to eventually hand off operations to Windows and that's going to complicate matters--Windows has to be able to see the drive.  While I believe there are drivers that let Windows connect to that drive, there's no way to authenticate (or even load the drivers I expect) before Windows itself is loaded--so it's a "chicken/egg" problem.

  • Internal speakers and headphones are not working

    I have hp g6 2231tx os Windows 8, brought it a month ago..now it's internal speakers and headphones are not working..I enabled in playback device from sound mixer and reinstalled drivers but still not working..it's because of hardware or software??

    Hi,
    It could be either Hardware or Software related, so try the following and let me know.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58517.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu.  Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter.  Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
    Let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I've received a message on my iphone 4s that it needs to be activated and it is not working

    I have recieved a message on my iphone 4s that it needs to be activated. I have tried doing this multiple times with strong wifi connection and it is not working. I connected it to iTunes as my phone suggested and i still could not activate it. This is quite frustrating as this does not allow me to use my cell phone for anything and I need it for many things.

    It would have saved to your camera roll.  Connect the phone to your Air via a USB cable and then run Image Capture which is located either in your Utilities folder or Other folder, depending on what version of Mac OS X your are running.  You will then see all the photos and videos stored on your iPhone and can then download them.

  • Page is working ok in chrome and IE but not working in firefox. jquery problem i guess

    http://184.170.251.149/raschet-shkafa-kupe
    this page is working correctly in chrome and IE but not working in firefox, i cant click and of the dropdown menus(ДСП, доличество дверей). it was working perfectly prior firefox 18. can you please fix the compatibility problem ?

    I was referring to the second page in my above post.
    I disabled JavaScript as a test after loading the page with JavaScript enabled and that worked.<br />
    I also get the selects to open if I right-click instead of left-click the select.<br />
    That way the select get selected (shows a focus ring) and after that left-clicking works as well .
    This assumes that JavaScript is monitoring the left-click, but that script no longer works properly.
    A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
    *http://forums.mozillazine.org/viewforum.php?f=25
    The helpers at that forum are more knowledgeable about web development issues.<br>
    You need to register at the MozillaZine forum site in order to post at that forum.

  • Dead Line monitoring is not working

    Dear Friends ,
    I have the belwo issue in my workflow .  Deadline monitoring is not working in my workfloow.
    Details of the Issue : --
    I have a Dialogue step in my workflow , which sends workitems to the user .
    Once workitem has cometo the user's SAP inbox it is in ready status . The user has not taken any action on that .The time perido mentioned in the " LATEST END"  is 2 minutes , so the workitem should show  " The follwoning deadline was missed latest end " for that workitem in theuser's sap inbox .
    But this is not happening .
    I have used this deadline monitoring concept many times , but i do not know wht is happening here .
    Can any body please help me on this to sort it out .
    Reagards
    Prabhudutta

    Hi Prabhudutta,
    I think you have done all the necessary steps!
    In such case what I feel the problem could be because of some minor thing that we might be missing...
    Can you please check the below link and confirm if you have followed all the steps that it states:
    http://****************/Tutorials/Workflow/DeadlineMonitoring/DM1.htm
    Hope this helps!
    Regards,
    Saumya

  • Component monitoring is not working sap pi 7.31

    hi friends,
    we are using PI 7.31. after restarting the system suddenly component monitoring in (NWA--PImon) stopped working and even RWB -->component monitor is not working. No users are locked(RWBUSER,AFUSER)...and remaining all webpages are opening except this.Inside Exchange Profile we have user FQDN as well. SLDCHECK working fine and SM59 Destinations also working fine,
    i am getting HTTP 500 connection timed out error.
    please suggest me.
    thank you
    regards,
    loordh.

    hi Iñaki Vila and Jannus Botha,
    thanks for your replies.
    i am getting  below error when i checked NWA logs and OS level logs
    Exception caught by adapter framework: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 500 Internal Server Error
    and regarding notes, i verified all and settings were OK and after PI restart as well no issues.
    please tell me some more places where i can see.
    regards,
    Loordh.

  • Deadline monitoring is not working

    HI,
    i had requirement to change the text displayed in the decision step type. I copied that task using pftc and changed the description and i replaced the new task number with old one. the deadline monitoring is not working for the new task .
    Please anybody have idea about why deadline is not working for the new task ?
    advance thanks
    regards
    paveee

    Hi Praveen,
    Deadline is failing only for this workflow? Or is it failing completely in the whole system. Just create a small dummy WF with a standard decision step (or some acitvity) with deadline monitoring activated and see if it fails there also.
    <b>If deadline monitoring is failing in all workflows</b>
    Can you just check whether the scheduled report RSWWDHEX are executing properly. You can check it in SM37 for user WF-BATCH. Also check in ST22 if there are any dumps for report RSWWDHEX (for user WF-BATCH).
    <b>If deadline monitoring is not failing in other workflows</b>
    In your activity where you have put your cutom task goto the "Outcomes" tab an check if the outcome for your deadline monitoring is "Active" (This may not change but just have a check)
    Also can you let us know what are the steps that you are using in your modelled outcome? Just suspecting if the first step in your modelled outcome is going to error (which is not displayed in log).
    Thanks,
    Prasath N

  • Silent monitoring is not working

    Silent monitoring is not working, sometimes it work for some and others time it does not.
    CCM ver 7.1.x
    IPCC Express 7.0.x

    - What kind of monitoring the ystem is configured for (server based or desktop ? )
    - what it fails do you see any errors on the CSD  ?
    - are agents in the same location as supervisor ?
    Regards
    Anuj

Maybe you are looking for