Capacity leveling log showing duplicate information for Resource

Friends,
Need one help.
When I am looking into the Capacity leveling logs, I see duplicate information for every Resource. There is no difference in the information regarding resource utilization (before/after). For every resource we are getting this duplicate records in the logs. Sometime there is one difference on timing, (when the resource was processed by the background job.)
Text . Details . Current Date . Time
Resource W10_U0JA_001
Parameters
Resource utilization
Resource W10_U0JA_001
Parameters
Resource utilization
There is no difference in details resource utilization, yet resource are shown two times, for every resource.
We are on SCM 7.0 . Is this standard? if so, then why?
Can you please share your opinion/thoughts. Thanks a ton.
Satyajit

Hi Satyajit,
This can happen because of resource setting in APO.
You need to check the following:
Bucket definition
Resource utilization
Time Zone
You should check also the "Time-Cont Capacity" tab details where start, end and break time is maintained,
You should also verify the "External Capacity" Tab data
There is no other reason apart from that.
You can also check the PPMs which are using this resource and some setting in PPM modes and other operation data.
If it is okay then possibility you need to check the model and version assignments.
You can remove the version assignment and delete the resource and again CIF it to APO.
Possibly it will help.
Regards,
Vishal

Similar Messages

Ipad still showing duplicate entries for songs.

my Ipad still showing duplicate entries for songs. I have unchecked Show Itunes in the Cloud purchases, I have tried replacing all items when autofilling (before syncing) I have even logged out then back into itunes, to no avail. Can you please assist? Thank you

hi guys, i was just googling the problem as i too have it, i am currently trying to sort it, i have deleted all my music off my phone using itunes and then put it all back on and also tried deleting it and outting 1 album on at a time, still not got rid of the duplicate tracks, i have now used the show duplicate items view and deleted those off my itunes library. i think i may have come across the problem!! i have just deleted all my music off my iphone using itunes again, and it shows nothing being on my iphone, however, if i go into music on my actual phone it is still showing 126 songs and none of them play. so i have now deleted them manually directly from the phone and am now putting all my music back onto my phone hoping i have cured the issue of ghost tracks.
ill let you know when its done if we are cured!!
BOOOOOMMMM!!!!! it worked!!! been so frustating, now its all good, hope this helps anyone with the same issues

[Devices Page] Show more information for the offline devices

Spotify should show more information for the offline devices that are under a user's account. The main reason I ask is because I have noticed on numerous occasuions that multiple devices in the list show the exact same name.
An example in the screenshot below:
It would be great if each device had more information e.g MAC address, last IP access, computer name and so forth.

Updated: 2015-07-28
Marked as new idea and edited the title slightly to make it easier to find via search. ;)
You might also want to add your kudos to a similar idea about the ability to name offline devices here.

"Dependecies" tab doesn't show any information for a selected table version 4.0

Hello,
I work with SQL Developer 4.0.0.13. I can see 20 tables in the list. When I select one table, in the tabs on the right side I can see information for "columns" and "data" and "constraints" and "indexes"... but the tab "Dependencies" doesn't show any information about references between this table and other tables in the schema.
Oracle database is v11.2
Can you please tell me what do I need to do in order to see information on "Dependencies" tab for a table?
Thank you,
Milan

Hi, here is my example of XML extension showing referencing tables:
Save the following XML to a file.
<items>
<item type="editor" objectType="TABLE">
    <title><![CDATA[*Referencing Tables]]></title>
      <query>
        <sql><![CDATA[SELECT
cfk.owner "OWNER",
cfk.table_name "TABLE NAME",
cols.column_name "COLUMN",
cfk.constraint_name "CONSTRAINT NAME",
cfk.delete_rule "DELETE RULE",
'SQLDEV:LINK:' || cfk.owner || ':TABLE:' || cfk.table_name ||
':oracle.dbtools.raptor.controls.grid.DefaultDrillLink' "LINK"
FROM
sys.all_constraints cpk,
sys.all_constraints cfk,
sys.all_cons_columns cols
WHERE
cpk.owner = :OBJECT_OWNER AND
cpk.table_name = :OBJECT_NAME AND
SUBSTR(cpk.table_name, 1, 4) != 'BIN$' AND
SUBSTR(cpk.table_name, 1, 3) != 'DR$' AND
cpk.constraint_type in ('P', 'U') AND
cfk.r_owner = cpk.owner AND
cfk.r_constraint_name = cpk.constraint_name AND
cfk.constraint_type = 'R' AND
cols.owner = cfk.owner AND
cols.constraint_name = cfk.constraint_name
ORDER BY
cfk.owner, cfk.table_name, cfk.constraint_name,
cols.column_name]]>
      </sql>
    </query>
</item>
</items>
In SQLDeveloper select Preferences -> Database -> User Defined Extensions and click <Add Row>.
In the "Type" field enter "EDITOR" and in the "Location" field enter the path to the file with XML.
After restarting SQLDeveloper You should see a new tab "*Referencing Tables" for tables.

How do I show more information for result set, I need company name, company address and company phone number to show. Now it is just company name and company address no telephone number, I need the number to show as well in the first result set

The result set I get for a search now only shows the company name and address, if I want the telephone number of the company in the result set, I have to click on the link to go the site information to get the number. I want the company name, address and phone number to show up in the result set without having to click on each hyperlink to get the telephone number...

???
See my profile at the left for information you are missing.
Who, when, why, how, how much, what is the URL

Windows 7 VM Network Browse shows duplicate name for DC

We have several Windows 7 VMs running on a Hyper-V server and recently a couple of them have started having problems whereby they can't map a drive to the File Server (SV001) when the user logs on.
If I browse the network from both machines I can see two entries for the DC/file Server, one in capitals and one in lower case i.e. SV001 and sv001.
I've checked DHCP, DNS and AD and can only ever see one entry and can't figure out why?
The only way to resolve the problem is to restart the Workstation service but after a few hours the problems re-appears
Any ideas?
Cheers for now
Russell

Hi,
Is there any error message when you tried to map drive on the problematic VMs?
If they just lost connections with mapped drive, you can try this fix:
Mapped Drive Connection to Network Share May Be Lost
http://support.microsoft.com/kb/297684/en-us
For further research, please upload the event log (System) of the problematic VMs.
How to Save Event Logs
http://msdn.microsoft.com/en-us/library/gg163107.aspx
Keep post.
Kate Li
TechNet Community Support

Reports and Console Show Different Information for Compliance

Hello,
Could someone enlighten me as to why for a specific Software Update deployment group I should see different compliance figures when I look at the deployment status in the console and when I run a Software Updates - A Compliance report?
For example for a recent batch of updates sent out I get the following figures from the Monitoring > Deployments part of the console; Total Assets 4,239, Compliant 2821, In Progress 37, Error 14, Unknown 1367.
If a run a report for the same batch of updates I get; Total Assets 4,238, Compliant 3343, Non-compliant 725, Unknown 170.
I suspect the difference might be due to a change having taken place for the set of updates e.g. Microsoft changed one of the updates to expired etc. and this has caused the clients to have to check their compliance status again.
What changes to an update that is part of a deployed update group would cause clients to have to check their compliance again and why would the report be different to the console?
Thank you for any help / advice.
Stephen

Hello,
I would be interested to know how the two different ways of looking at what should be roughly the same data can show quite different stats. At the moment for one deployment of software updates the Deployment Status pie-chart tells me that 3,006 clients are
compliant but the report tells me that 3,360 are compliant.
What seems to have happened is that an update that is part of the deployment changed its status so that the clients are having to check their compliance status again. This is slowly happening and I can see on the Deployment Status pie-chart the number of
compliant clients is slowly going up but on the report the compliant number seems to have remained high almost as if the need for the clients to re-check their compliance has not been taken into account.
Thanks.
Stephen

SUIM Change Documents shows duplicate information on user validity renewal

Hello,
When the validity extended or password is reset, the roles which are already present in the user profile appear as added again in SUIM. [It appears as "Profile added"]
Is this a bug? How can I get the correct this? Kindly help.
Thanks a lot in advance!
Regards,
Sundar.

This is because when a role is out of validity, the profiles are removed.
When you change it to be valid again, the profiles of that role are added again.
Roles are not authority normally, they are just a tool.
I assume that the password comment is only because you are resetting the user's pwd when you reactivate their access (the access of their roles being valid again).
You are doing it the correct way, and change docs are correct and there is no "bug".
Cheers,
Julius

Resource scope when performing capacity leveling with Optimization method

Hello,
Can anyone tell me if, when performing the Optimization method in Capacity Leveling for transportation resources production resources are validated? I am currently testing this and I found out that if the capacity variant of the production resource is no 00, 01 or 02 the system will give an error message when trying to level a transportation resource, the message indicates that there is no available capacity for the production resource.
When reading documentation in help.sap it appears to me that Capacity Leveling should only focus on the resource to be level not in other resources and in this case my transportation resource has available capacity that shouldn't be affected for master data errors of production resources...
Could somebody help me clarify this issue?, I have already open a message and they suggested me to change the capacity variant of the production resource, evidently when I do this everything works but I still don't understand why capacity leveling, with Optimization method, of a transportation resources is checking on production resources.
Thanks!
Erika

Hello Ian,
I am not talking about the SNP Optimization Run that is certainly manipulated by the constraints that you update on the optimization profile; in this case "Capacity Leveling with Optimization Method" the constraints are automatically set by the system and what I need to know is if these constraints are considering not only the resource that is to be leveled (in this case the transportation resource) but also the production resource.
Sorry but your answer does not correspond to my request, because you are talking about the Planning Optimization run and I am talking about "Capacity Leveling with Optimization Method".
Erika

Show information for BPM process instances to possible future assignees

Hi all,
My environment is 11.1.1.4.
I want to develop an ADF application that shows users information for BPM process instances which will possibly produce a user task assigned to them in the future.
What I have done is
1. Get BPMAppRole from the user name.
2. Get the list of CompositeInstance with STATE_RUNNING from the BPM process name obtained from the BPMAppRole.getName().
From the list of CompositeInstance, I have to extract the instances that will possibly produce a user task assigned to the user in the future.
But I have no idea how to do this.
Maybe my current approach is totally incorrect.
Please help!
Regards,
Kenji

Hi,
By chance I found a method that you can use:
oracle.bpel.services.workflow.query.model.TaskSequence getTaskSequence(oracle.bpel.services.workflow.verification.IWorkflowContext p1, oracle.bpel.services.workflow.task.model.Task p2, java.util.List p3, java.util.List p4, java.util.List p5, boolean p6) { }
getTaskSequence might help you. This is under ITaskQueryService interface.
HTH.

How to set the filter on a report to show the data for the Current Month

Hi all,
I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
Any help would be greatly appreciated!
Thanks,
AA

You need to add a session variable to date fir worked assuming that this is a date field.
To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section.

Capacity Leveling(CM25 Transaction)

Xperts,
could you please give us some documentation/online material on Capacity Leveling(CM25 Transaction)?
Rewards for your inputs.

hi
To Know about Capacity levelling, u can use this thread
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPCRPLVL/PPCRP_LVL.pdf
http://help.sap.com/erp2005_ehp_02/helpdata/en/8a/a58eb24adc11d189740000e8322d00/frameset.htm
regards
Palaniappan

Video information for .avi, etc., besides .mov

.mov files have extra information in Finder, such as it shows the video length, etc. in Get Info. It doesn't show this information for .avi and other video files. How do I get it to do this?

I wouldn't count on it being available until those formats offer better metadata support. The relevant information is definitely present in the metadata included with the file in .mov files, and isn't there in .wmv files. I have a .mov file that I converted to .wmv using QuickTime. The original has the pixel dimensions and duration in its metadata, the converted version doesn't.
Francine
Francine
Schwieder

Rough cut planning in SOP for resource levelling

Hello,
I am trying rough cut planning in SOP.
I have created rough cut planning profile for a product group by using MC35.
The task list exits for the product group.
In task list , work centre is maintained and the same is given while creating the rough cut profile.
This product group contains some part number.
When I try Views--->capacity situation -> rough cut planning--->show.
System gives error that -
> No resource load found.
<u><b>Diagnosis given by system is as follows,</b></u>
This situation may be caused by one or more of the following:
     No PP task list (rough-cut planning profile, rate routing, or routing) corresponding to the Customizing selection criteria has been defined for this material/product group at this scheduling level.
     Resources planning has not been configured appropriately in Customizing.
     The information structure which you are planning has not been configured appropriately in Customizing.
System Response
No capacity load could be determined.
Procedure
1. Check that a PP task list exists for this material/product group.
2. Check that a lot size range has been maintained in the PP task list.
3. Have your systems administrator check and, if necessary, change the resources planning settings in Customizing for Sales & Operations Planning (the steps "Scheduling levels" and "Routing selection").
4. Have your systems administrator check that capacity planning has been defined for this information structure in Customizing.
Please let me know how to maintain the resource planning settings for scheduling level and routing selection.
Waiting for your reply.
Regards,
Ravindra Deokule

Hi Ravindra,
You can use t.code mc84 to create a product group.
Pl follow the following steps to do SOP with product group.
1. Create a Product group in tcode MC84.
Enter a percentage for material say X & Y to be produced. X 40% & Y 60%. Total qty will be split in the ratio as per the %.
2. Create Production Plan in tcode MC81.
Enter the sales plan qty.
Then goto menu,edit & choose create Prodn Plan synchronus to sales.
3. Create Rough cut Planning Profile in tcode MC35.
4. Enter the Status ,Usage & lot size.
5. Choose resources tab & then choose work center & enter work center name which you consider as a bottle neck & then enter the unit of measure as 'min'.
6. Use MC82,
Choose inactive version and select your version.
then goto menu->views> capacity situation>show
7.Check for over loads & adjust your qty acordingly.once the load becomes 100 % save.
8. Change the inactive version to Active version in tcode MC78.
ie in the version enter the inactive version & in the target version enter'A00'
9.In mc82 choose active version, you can see that the plan is activated now.
10.In the menu choose extras & transfer to demand mgmnt.
11.You can see the requirement in the md62 transaction.
12.Then run mrp.
Also regarding the unit of measure in t.code mc35,
If you select your resource as 'workcenter' & choose min or hour & then you enter 1(eg) in the first field against the work center. This means it takes 1 min or hour to produce 1pc(base quantity) in that particular workcenter(bottleneck workcenter)
Reg: Capacity calculation in mc87,follow the eg as above.Enter 1 min as time & base qty as 1 in mc35. Then check in mc87, you will get the load in %. ie if your work center is permitted to work for 8 hours/day & you pass a production plan of 480, then your load will match for 100%.
Regards,
Senthilkumar

APO - capacity profile time capacity for resources

Dear all,
I have a problem which I hope can be resolved by one of you ...
In APO, it is possible to add downtimes for resources using transaction /SAPAPO/RES01 ... After adding this, we can click on "capacity profile" and then we see the time capacity of a resource with all downtimes per shift (with capacity variant) ... I would like to use this time capacity in a program, so it would be interesting to have this information on DDIC-level ... I am looking for some days now, but I don't find which tables to read or which BAPI / function to use ?
Does anyone know how I can find this data ?
Thanks in advance for the assistance !
Greetz,
Kurt.

Hi Kurt,
You can use the below tables/views in which Resource and Capacity Profile related data is stored.
Tables:
/SAPAPO/RES_INTQ - Resource Capacity Intervals
/SAPAPO/RES_INTV - Resource Capacity Intervals
/SAPAPO/RESCAP - Capacity Profile: Resource Time Capacity
/SAPAPO/RESDIM - Dimensions and Capacity of a Resource
/SAPAPO/RESDOWN - Resource Downtime
/SAPAPO/RESDOWNT - Resource Downtime
/SAPAPO/RESKEY - Reset Key for Resource to UID
Views:
/SAPAPO/V_RESVER- Resource Capacity Variants
/SAPAPO/VRESINTQ - Resource Interval of Available Capacity Quantity Model
/SAPAPO/VRESINTR - Resource Interval of Available Capacity Rate Model
BAPIs available to read:
BAPI_RSSRVAPS_GETCAPAPRO - Read Resource Capacities Profile
BAPI_RSSRVAPS_REQUESTCAPAPRO - Query: Selection of Capacities for Resource and Result Transfer
BAPI_RSSRVAPS_GETLIST - Selection of Resources
I hope this will help you to get the data which you want to read.
Regards,
Saurabh

Capacity leveling log showing duplicate information for Resource

Similar Messages

Maybe you are looking for