Captivate audio not pausing in LMS after bookmarking relaunch.

My course is in Captivate 5.5. I have audio attached to each slide and each slide has a "Next" text button to pause the slide at the end. We use SumTotal LMS. The course works fine if you launch and complete it in one sitting. If I close out and bookmark my place, then relaunch the course it will start where it left off and the slides pause at the "Next' button, however the audio keeps going. I have looked this up and down from both sides and cannot resolve this issue. Multiple users have had this issue. Any help would be appreciated as I need to get this course live.

Rod,
Thank you very much! I added the audio slide by slide and I do have it at the start of each slide. I will try moving it a tenth or two out.
I appreciate the help.
Terry
cid:[email protected]
Terry Bradford
Technology-Based Learning Supervisor, Global Learning Center
AGCO
Tel +1 770.232.8095   Fax +1 770.813.6140
4570 River Green Parkway, Suite 140
Duluth, GA 30096-2563 USA
[email protected]<mailto:[email protected]>
www.AGCOcorp.com<http://www.agcocorp.com/>   blog.AGCOcorp.com<http://blog.agcocorp.com/>
facebook.com/AGCOcorp<http://www.facebook.com/AGCOcorp>   twitter.com/AGCOcorp<http://www.twitter.com/AGCOcorp>   youtube.com/AGCOcorp<http://www.youtube.com/AGCOcorp>
cid:[email protected]

Similar Messages

Captivate 5 not working with LMS when linking to AICC published file

When we publish and link our Captivate 4 files. Everything works fine. Now that we've upgraded and tried launching the Captivate 5 files. We only get a loading screen. Can someone help us? We provide training for over 10,000 employees and train several departments to use Captivate for our LMS, but now with Captivate 5 not working it brings up a big issue for us.

another HotFix worked for me:
This is with reference to the issue you are facing with AICC courses on LMS.
Please follow the steps mentioned below and let me know if this solves the issue for you.
1.       Close Captivate if already launched.
2.       Navigate to Captivate installed folder ( For Ex : C:\Program Files\Adobe\Adobe Captivate 5)
3.       Navigate to folder “Templates”
4.       Open folder “Publish”
5.       Open folder “AICC”
6.       Rename the HTM file “default.htm” to “default_old.htm”.
7.       Download the zip the file from https://acrobat.com/#d=rZv8-z9C0z4PPMpqjbkZIQ , Unzip the contents and copy the HTM file “default.htm”
8.       Paste it inside “AICC” folder.
9.       Launch Captivate and open the project.
10.   Re-publish the project and upload the content to LMS.
Let me know if this solves the issue.
Thanks,
Ashwin Bharghav B
Adobe Captivate Team
hope it works for you!

Iphone 4S bluetooth audio not working in car after however bluetooth for calls is 2011 nissan maxima

I recently upgraded from an iphone 3gs to an Iphone 4S IOs 5 i deleted the bluetooth profile from my car and paired the iphone 4s ........bluetooth calls recieving and making is no problem...however after i changed my phones the bluetooth audio feature is not working at all in my car which is an 2011 Nissan Maxima.....I check with my friends Ford Focus and it works perfectly .........I don't expect an update from Nissan.....So i hope on the next iteration of the Ios5 firmware this can be addressed..

The bluetooth streaming seems to pause regularly - called Nissan - they don't have any info on it.

MSI GT70 audio not working with hmdi after windows 8.1 update

When I connect my laptop to the TV, the video comes out fine, but the audio for the TV does not show up in playback devices. It worked fine with windows 8, but after the windows 8.1 update it stopped.
I have tried updating realtek drivers, but it still doesn't show up. updating other drivers also doesn't work. plugging the cable into the computer then booting it up also doesn't work like it did for other people. This is really making me mad... any help would be appreciated.

Quote from: zipper.sippola on 16-December-14, 23:25:58
Pah, no probs to my ext. monitor speakers via HDMI, GT70 0NE, Win 8.1.
Have you tried assigning HDMI one on audio tab as default and see if sound will come out to tv? if so then that was the problem.

Captivate presentation not launching in LMS

I created an acknowledgement in Captivate using a PowerPoint and needed to publish it to an LMS (Plateau). When launching the finished product from the LMS, I am not seeing the presentation; all I am seeing is a grey screen. There is no error message and nothing is loading. Any idea what could be causing this?

Hello and welcome to the forum,
Can you explain how and what you did upload? Is it working OK with Preview in Browser? If yes, be sure to upload all files created when publishing. If you published to SWF, normally you'll have at least a JS and a HTML-file. The last has to be launched. If you have reporting enabled you should have published as a SCO which results in a zipped folder with a lot of files in it, all required to enable reporting. I don't use Plateau but another LMS and I find the easiest way to upload another presentation is to have it zipped (there is a butotn in the publishing dialog box), and upload the package instructing the LMS to unzip and launch the HTML-file. But I'm not sure that this is possible with Plateau.
Lilybiri

Audio not playing in video after publishing in Presenter 8

I am having a problem in Presenter 8. I add the video to the power point and it plays in power point fine, but once I publish it in Presenter, the audio does not play. Any suggestions. I made sure that the settings were all correct within the Presenter.
In addition, I am having a problem getting any MP4 videos to play within Presenter. Any suggestions for that?

Which player is set as the default for FLV file types?
I have seen similar issues with VLC Player (normally a great software player), but when played in Adobe Flash, or MediaPlayer Classic HC, they played just fine. That is why I was asking about the player program used.
Also, when you run one of the FLV's through MediaInfo, what are the details of the Audio Stream?
Good luck,
Hunt

Captivate 5 - Not sending LMS Finish

All-
I need your help to solve a frustrating problem. I have been using Captivate for several years, and recently started using Captivate 5. The courses I designed in the past were hosted on an LMS that was not SCORM compliant or even conformant. We are transitioning to Element K which professes to be SCORM compliant. I started by taking the courses which were built for the old LMS and turned on reporting. I have made several test files with different settings, however, I see my problem in every case.
Here are the settings from my most recent upload:
Reporting enabled
SCORM 1.2
Template: Send tracking data at end
Manifest: Mastery Score set to 90%
Report Status: Complete/Incomplete
Report to LMS as Percent
Report Data: Quiz Results Only
Reporting level: Interactions and Score
LMS Customization Settings: checked - Never Send Resume Data; checked - Escape Version and Session ID (<--- What exactly does this do and why/why not check it)
Project End options: Close Project
If passing grade: Continue
If failing grade: Infinite atttempts, show retake button
My problems are as follows:
Element K launches the course in a new window. Upon successful completion of the course (passing grade of 90% or better), the results page offers the "Continue" button. When the "Continue" button is pressed, the slide progresses to the next slide which instructs the user to close the window. When the window is closed, it appears that Captivate does not send an LMS Finish command to the LMS, so the course is not marked as complete. I used the ADL's "Test Suite" on the course and it failed because the course did not send an LMS Finish Command, however, I found that tool hard to use and sometimes I couldn't get the course to load at all. Probably my newbie fault, but I don't know.
Is there something I need to set in Captivate to make it send the LMS Finish?
Should I remove that last slide that clicking the "Continue" button takes you too? I put in in there becuse clicking "Continue" on the Quiz results page does nothing at all (at least on the front end).
Does the "Close Project" option under Project End Options send the LMS Finish command? Should that be set to something else?
Does the user have to click the "Continue" button on the Quiz results page to send the LMS Finish command?
One one of my previous test courses, I unchecked "Never send Resume Data" as I wanted the user to be able to return to the course where they left off. This worked fine until they completed the course (but was not marked as complete in the LMS due to the above problem); when they returned to the course again, they were sent to the last slide of the course (the one that tells them to close the window). Will this always happen or will the bookmark "reset" once the course is shown as completed in the LMS?
I am new to SCORM and what little I know has been learned by reading on the web/forums while searching for solutions to this problem. Any suggestions, hints, tips or tricks with regards to SCORM and Captivate 5 and/or Element K would be appreciated. I have exhausted the forums and even tried scanning some resource books to try and understand the settings within Captivate in regards to what they do and how it effects the course.
Thanks in advance!
Katherine

HI
I've learned that using the "Close Project" option is the best one. Make sure that the "result"slide offers the last button available for the user. The one that shows up as deafult, marked "Continue", is the one I use to end the course. Rename it "Close & Save". By doing this the course closes and the SCORM results are sent to the LMS.
What I've noticed is that not all previous releases of browsers does this very well. 6 months ago, I couldn't make Safari, Opera, Chrome or FF work. But recent updates have fixed this. Today, Opera is the only one with an issue, it works,but very very slowly.
Hope this helps:)
BK

Custom Quiz with Master Widget not reporting in LMS (Captivate 5.5)

Hello,
I have written a custom quiz with partial scoring and, in order to report answers, I am using the Master Widget. (Huge thanks to Lilybiri and Infosemantics for all of the guidance I have found in blogs and e-learning classes!)
In summary, the quiz is composed of 2 questions with 4 possible answers each. Each of the 4 answers have a different score attached to it (i.e. answer a = 4 points; answer b = 3 points; answer c = 2 points; answer d = 1 point). On each question slide I have added a Master Widget (using the variable representing the points the student received as a slave object). I want the quiz to report the score for each question. After the student has answered both question slides, they continue to a "Results" slide. Here they view the total of their scores and get feedback on if their total is to high, too low, or in-line. On the results page I have used the Master Widget to report the total score to the quiz.
I have uploaded this quiz as a SCORM package to both Moodle 2.3 and Blackboard 9 (we are trialing different LMS systems). The quiz runs great in each LMS but when I try to access a report, I don't get any results: no report of the points received for each quiz item and no score total. In fact, in Blackboard I get a blank page:
In Moodle, I get:
Here is what my quiz preferences look like:
I am really stuck. I realize there are a lot of components to this process and I really need some help to find out where the problem lies.
Thank you for your time and help!!!

Bray,
Yes the figures shown on the Quiz Results slide are important because they indicate some of your widgets or other interactive objects are not being reported to the 'official' quiz score.
You need to go back and check the objects that you want to be included in the score. The 67% score reported by the quiz on the quiz results slide probably means that Captivate thinks you only have three objects reporting to the quiz and only two of those (two thirds or 67% in round figures) were successful.
You mentioned before that you have three Master widgets in this project. How many of them are set to report to the quiz? To test whether they're all reporting success, turn on Success and Failure captions for these widgets and then run through your interaction.
When using Slave Variables with the Master widgets for partial scoring, don't forget that although the Master widgets might count these variables as being interactive objects, Captivate does not.
Although the Master widget is VERY powerful, it also tends to mess with people's minds because there are just SO many ways you can configure it. If using partial scoring, check whether or not you have the option set to over-ride the widgets own assigned score with the total points score from the slave objects. If you use this option, you need to make sure that at no time can the over-ridden score fall outside the 0-100% range that SCORM-compliant LMSs will accept.

Content has not sent any info back to the LMS after the LMSInitialise

We created a content piece with Cpativate 3 and it looks like
the content has not sent any info back to the LMS after the
LMSInitialise. So as per the SCORM standards, the LMS marks it as
complete when the player window closes.
The content needs to send back a status of incomplete as soon
as it has done the LMSInitialise. The lesson_status = incomplete
was sent by the LMS to the content, not the other way round.
Is this because the content was delaying sending back a
lesson_status of incomplete to the LMS, so the LMS was just marking
it as complete if the content was closed too early.
If anyone has had a similar issue like this and discovered a
fix, please let me know.
Regards,
Ryan

Hi Andrew,
Thanks for the reply. We are using Saba and they have fed
back to me that they have experienced problems before using
Captivate. I am currently trying a few different settings to see if
it is on my end. I will forwqard the piece onto you soon.

HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing games

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Captivate 8 not picking up System Audio

Good morning,
My partner and I are both using Captivate 8. We are trying to use a Lync meeting to capture audio. It works fine on my computer but not on my partners. It seems all her settings are the same as mine. She used to be able to pick up the system audio but it has stopped working for some reason. I have had her re-boot twice. Anything else we should be checking?

Hi Lasers Edge,
It turned out that the problem was not actually in Captivate but in Lync. The Lync setting default was not using the Logitech Headset but something else that Captivate did not pick up as part of system audio. Had to click on the Speaker icon in my tray at the bottom of my window (application agnostic). Then click on Mixer. There are then choices for Speakers, System Audio, Lync, etc.... Only Speakers has a drop-down arrow. Select your headset instead of the HP or Realtech or what ever is there. This should fix the problem.
PS -- For us, why it was working for several weeks and then stopped turned out to be a Blue Jeans Conferencing upgrade. Each member of the team had the issue on different days over a two week span and it turned out to be the same day we updated Blue Jeans. Hope that helps.

Outgoing audio. Was not going on Skype after ios7 download.went to settings--privacy--microphone--on--and the problem was resolved.

Outgoing audio. Was not going on Skype after ios7 download.went to settings--privacy--microphone--on--and the problem was resolved.

Hello:>
I created a function "APEX_030200.wwv_flow_epg_include_mod_local" as a sys user, then I dropped it.>
You can't have 'created' this function ! The function is installed by the APEX installer. This function needs to exist in the database for APEX to function correctly. Install the function described below into your database
CREATE OR REPLACE function APEX_030200.wwv_flow_epg_include_mod_local(
    procedure_name in varchar2)
return boolean
is
begin
    return false; -- remove this statement when you modify this function
    -- Administrator note: the procedure_name input parameter may be in the format:
    --    procedure
    --    schema.procedure
    --    package.procedure
    --    schema.package.procedure
    -- If the expected input parameter is a procedure name only, the IN list code shown below
    -- can be modified to itemize the expected procedure names. Otherwise you must parse the
    -- procedure_name parameter and replace the simple code below with code that will evaluate
    -- all of the cases listed above.
    if upper(procedure_name) in (
          '') then
        return TRUE;
    else
        return FALSE;
    end if;
end wwv_flow_epg_include_mod_local;
/Varad

After 10.6.4 update, some audio not going through

After the 10.6.4 update I've been having trouble with some audio not going through the USB headset.
Things that refuse to go through the headset:
* Empty trash noises
* Skype notification noises
* iChat alert noises
Things that are working:
* Coloquy
* iTunes
I've tried toggling the System Preferences obviously. Unplugging speakers and USB headset and plugging back in a number of times (this seemed to fix some things, not others).
Anyone else having the same issue?
(Note to forum mods: you need to add 10.6.4 to your OS dropdown)

Reseting the PRAM has solved this problem.
http://support.apple.com/kb/ht1379

DVD will not pause after burning

The DVD I create with iDVD will not pause after burning. I've tried various DVD players with the same result. Everything else about the disc seems fine. I'm using a DVD-R disc, with iDVD 5.0.1
I have burned DVDs in the past without this problem! I seriously need advice, thanks!!

Hello artisshiny,
if you feel that you have performance issues on your Mac in general (and iDVD in particular), try to do the following:
1. find the file com.apple.iDVD.plist and trash it, then empty the trash.
2. free up some space on your hard drive (20 GB should be free when working with iDVD)
3. repair permissions with Disk Utility (Applications > Utilities) and reboot.
4. run software like DiskWarrior or Macjanitor
hope this helps
mish

Captivate 3 shows skin in preview but not when I run after published?

Captivate 3 shows skin in preview but not when I run after published. It shows it is included, what's up?

Is the Skin externalised? If so, perhaps Flash Global Security is interfering:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security
You could also try NOT externalising the skin.

Captivate audio not pausing in LMS after bookmarking relaunch.

Similar Messages

Maybe you are looking for