Capturing in Premiere Pro

Has anyone run into problems capturing video from a HD desk SDI to Premiere Pro? It cuts off after 40 minutes. Currently running Premiere on Mac tower 2013 running 10.8 Processor 2 x 2.4 GHz 6-Core Intel Xeon 16RAM Graphic card ATI Radeon HD 5770 1024 MB. Also, what I can capture I cannot see T.C in QT player only in Premiere. Any help would be great!

PostTech,
Yes, tc is embedded and you should be able to read it if you are using QT7 Player and choose TC in the lower left toggle in the QT player window.
~Myron

Similar Messages

Unable to batch capture with Premiere Pro CC via Kona LHi

AJA's web site claims Premiere Pro CC is compatible with the Kona LHi card, but I can't get the two to work together properly. After repeated tries, I uninstalled and reinstalled everything AJA, but still no luck.
I need to batch capture DV clips from some mini-DV tapes on my Sony MVR035U tape deck. But I also need to upconvert them from 480i to 720p60 using my Kona Lhi card. I should be able to do this with Premiere Pro CC. But the PPCC Capture window won't give me any audio feedback when I select "AJA Movie Capture" in the Capture Settings pull down menu. I only get audio feedback when I enable "DV capture" but then I'm no longer able to upconvert.
Looking forward to any feedback on this issue. Been tying all day to trouble shoot this problem.
[Text formatting removed. Please type your posts here, rather than pasting.]
Message was edited by: Jim Simon

And now with CC June 2014 you can't even capture from HDV, I need to go back to Premiere CC 2013 for that....Adobe might think tape capture is over... but it isn't totally yet...

Capture error premiere pro cs3

I've got an ongoing capture error in premiere pro cs3 (on Mac OSX).
At around the 9 minute mark of capturing, it stops and says 'Unknown recorder error'. The footage is still captured if I stop it straight away but lost if I leave it for a while. I'm using canon hv30 camera to capture dv footage (not hdv) and can't seem to solve it. Any suggestions?

Try a different capture utility. VideoHelp.com will list plenty of free alternatives. If they stumble as well, there ie likely something wrong with the tape at that spot.

Can't Preview HDV Capture In Premiere Pro CS6

I can't preview my HDV footage in Premiere Pro CS6.
I know I'm not supposed to be able to see anything in the Capture Window when I'm actually capturing HDV, but it says I should be able to see my footage when I am just previewing in the Capture Window.
Canon HV20
i7 2600K
Windows 7 64 Bit
ASUS P67 MOBO
16GB RAM
GTX 470
Corsair AT 850 Watt PSU
Thanks!

Thanks Ann!
I just figured it out.
I'm using 2 monitors in extended mode.
One is a VGA flat panel and the other is a DVI flat panel.
I had the Capture Window open on my VGA monitor.
When I moved the Capture Window to my DVI monitor, I got a preview picture.
It's funny, when I move the Capture Window from the DVI to the VGA while playing, playing stops.
And when I move it bak to the DVI, it continues to play.
Maybe because the VGA isn't digital?
Both monitos are hooked up to my GTX 470 GPU, so it seems wierd.
Any feedback on this would be welcomed.
Thanks again!

Using HV30 to capture in Premiere Pro CS4, PLEASE HELP!!

I have cs4, an XH-A1s and an HV30....and a MacPro from 2008.
I have recently narrowed down my issues with a bad firewire port on my xha1s.
Can or Cannot I use my HV30 to captureHD footage in Premiere Pro CS4?
It simply says capture device offline.
If anyone knows the trick, please fill me in.
ON EVERYTHING, project settings, camera settings, any info you can give.
I trust y'alls advice and just need to capture now!!!! lol.
Any other info you need from me, let me know!
Thanks so much you guys!!!!!
Shay in NC

Hi,
some of these posts might be helpful
Rod
http://www.hv20.com/showthread.php?t=9368

Capturing with Premiere Pro CS5 & Canon Legria HV40

Hello everyone,
I have an issue trying to capture footage from my Canon Legria HV40. My desktop operates with Windows 7 / 64bit and I use a firewire port when attempting to capture from the DV cassette on the Canon Legria HV40. After opening Premiere Pro 5 (not a trial version) I connect my camera via all the correct ports and open the capture window in the software. After setting up all my preferences for the capturing process the software recognises the camera and I am able to operate the camera from my desktop (fast forward, rewind, play etc...).
The issue starts at this point. When i press "Tape" or "Play" then "Record" to start the capturing process the camera kicks into action. However the software does not record anything from the camera.
Does anyone have any suggestions or have they come accross this issue before. Any help would be appreciated.

MKoffy Hi,
It works just fine here, same set up, but with CS5.5.2 not older version.(5.5.1 or 5.5 did not work), other contributers spoke of a "LEGACY" driver?, I think Harm Millard he may know more than I do. We are PAL, the camera obviously works, make sure you have camera set at 1920 x 1080 i.And the same setting in PP, however PP should automatcally set that for you.
In fact when Exporting to Tape it is amazing and starts the camera with out having the record button executed., it (the HV40 is Anamorphic at 1440 x 1080 (the limitation for Pro tape) and will record at Progressive, the pixels are rectangle not 1.0 , but the output is i). Do not save clips to another DRIVE.It is best in the RAID set up. according to Canon Specs it records at HDV 1080/50i , 1080/25i (PAL) These settings must match the set up in Premiere Pro 5.5.2 exactly.I do not set IN or Out points, it might have been a good thing to stripe the tape in the first place as it will recognise the Indexing numbering better that way.
I must add the quality of the Export even to Blu-ray astounded me. Nearly as good as the Canon 5D Mark II 1920 x 1080p but, that was from a CF card.
Good luck
Ps. Frankly the Premiere Pro CS5.5.2 surprised me when it recognises all that when it went to work. Because when you used Premiere Pro 1.5.1 everthing was manual, well nearly.

Capturing with premiere pro cs6

Hallo,
I use permiere pro cs6.
My problem is capturing from DV,
Because my camera JVC GY-HD101 work with miniDV en I use for capturing Panasinic NV-GS500
Wich capturing programs work without problem with premiere pro?
Thanks

1st, some general help
http://helpx.adobe.com/premiere-pro/kb/cant-capture-dv-hdv-video.html
-and Windows http://forums.adobe.com/message/4708997
2nd, alternative programs
I have NOT used either, but many say to try these for SD capture http://windv.mourek.cz/ or http://www.exsate.com/products/dvcapture/
I have NOT used it, but many say to try this for HDV capture
-archived at http://www.videohelp.com/tools/HDVSplit
-Click the 1st link under "Download sites:" for the latest version

Is it possible to live capture into Premiere Pro using a Canon 1DX DSLR?

Hello,
We are trying to avoid capturing into the canon capture software, exporting, then importing back into Premiere Pro for editing. Is it possible just to capture directly into Premiere Pro using a Canon 1DX DSLR?
Thank you in advance for your help.
Amanda

I have got FCE HD which I assume works in a similar way.
Go to Easy Setup and select "DV - PAL DV Converter".
When you have finished remember to return it to its original setting.
Ian.

Video isn't stable when capturing in Premiere Pro

Hello, I'm hoping someone can help with my problem.
I'm on a two year old Dell PC, Windows 8.
I recently installed this video capture card to work with Premiere. The card was installed properly, and the driver is up to date.
When I attempt to capture video, the video is very glitchy. Only a few frames of the video is seen in the capture window, then a black screen. The audio plays fine however. I am able to record the video, and despite not being able to see what I'm recording, it does work. After I stop recording, the full video file is available in my project folder with no glitches at all. What's going on here? Why can't I see what I'm recording?
I have verified that the card works fine in other programs. In Windows Movie Maker, I am able to view and record video no problem at all.
Any troubleshooting would be greatly appreciated.

The card description says it has 4 pin power connector... did you plug in a power supply connection?
This is more about not capturing at all, and MAY be only for Win7, but reading can't hurt
http://helpx.adobe.com/premiere-pro/kb/cant-capture-dv-hdv-video.html -and more about Windows http://forums.adobe.com/message/4708997
I have NOT used either, but many say to try these for SD capture http://windv.mourek.cz/ or http://www.exsate.com/products/dvcapture/
I have NOT used it, but many say to try this for HDV capture
-archived at http://www.videohelp.com/tools/HDVSplit
-Click the 1st link under "Download sites:" for the latest version

Sony HDV-HD1000U Capture to Premiere Pro

How can the Sony HDV-HD1000U be connected to Premiere Pro to capture video from it?

The PR forum is your friend...
Mylenium

Capture in Premiere Pro: Wenige kurze Aussetzer im Audio, danach Audio u. Video asynchron

Hallo,
beim Einspielen von DigiBeta in Premiere Pro 1.5 habe ich in letzter Zeit häufig das Problem, dass bei einem ca. 2 Stunden langen Film an einigen wenigen Stellen Audio-Dropouts (mit deutlich hörbarem Knackser) auftreten. Im Video ist an diesen Stellen keine Unterbrechung sichtbar, nur beim Ton fehlen ein paar Sekundenbruchteile. Die Synchronität ist nach solchen Stellen leicht verschoben: Der Ton ist ganz leicht vor dem Bild (so als wenn das Bild - unabhängig vom Ton-Aussetzer - ohne Unterbrechung weitergeschrieben worden ist).
Ich habe Premiere in den Optionen eigentlich so eingestellt, dass bei einem Frame-Drop die Aufnahme abgebrochen wird. Das Einspielen klappt aber immer ohne Probleme, und die beschriebenen Aussetzer fallen leider immer erst auf, wenn es schon zu spät ist. An der Geschwindigkeit des RAID-Laufwerkes kann es eigentlich nicht liegen, denn mit Liquid Chrome eingespielte Sachen haben keinerlei Dropouts. Auch die anfängliche Vermutung, die Ursache läge an zu wenig Speicherplatz, hat sich nicht bestätigt; es ist ausreichend Platz. Eine Defragmentierung des entsprechenden RAID-Laufwerkes hat das Problem ebenfalls nicht gelöst.
Ich wäre sehr dankbar, wenn jemand einen Tipp hätte.

Das Gleiche Problem habe ich auch, aber keine Lösung.
Im Unterschied zum oben beschriebenen aber ohne Knackser und Dropouts genau ein Frame lang (ein Bild). Dafür tritt es aber ziemlich häufig auf.
Dieser Fehler tritt nicht beim Capturen auf, denn danach sind die Dateien noch in ordnung. Es ist kein Drop feststellbar, wenn diese Datei mit einem anderen Player abgespielt wird. Es muss wohl in Premiere passierten, nachdem diese Datei in das Projekt importiert und in die Timeline gestellt wurde. Danach sind Drops deutlich sichtbar, wenn man sich den Audio-Teil vergrößert ansieht.
Wenn mir da jemand helfen könnte !

Screen capturing in Premiere Pro 2.0?

I'm looking to create a video presentation of my company's proprietary web applications and would like to capture my screen as I navigate through the pages and narrate. I have seen other recently released video editing software that enables users to capture the current screen as video - but we have Preimier Pro 2.0 at the office. Can I screen capture with this version or what kind of upgrade would support this feature?

What Jim points out is unfortunately all too true. Some have had success with Camtasia footage (via conversions, etc.), but many just rely on the limited editing capabilities in the current release. It's also true for Adobe's screen-cap program (name eludes me right now). There seems to be less success with that one, than with Camtasia.
Do not know if CamStudio has any editing features.
You might want to also post to the Video Lounge, as both Jeff Bellune and Curt Wrigley do video tutorials and do them well. They WILL have some ideas for you. The Lounge is for non-Adobe specific questions. Though there is a technical nature to your question, I think it will fit right in, and both are likely to see and respond to your request for info.
Good luck,
Hunt

Capturing to Premiere Pro CS4

I just purchased a Canon ZR960 and have footage on a mini tape. I'm running Adobe Premiere CS4 on a Mac. How do I capture the footage to Premiere? I tried File > Capture but no clips show up. What am I doing wrong/not doing?
Thanks much for any help.

Welcome to the forum.
First, plug the Canon into a FireWire Port. Turn on the camera and place it in the proper Mode. In PrPro, click Capture and then choose that camera (or very similar) from the device drop-down. If you wish Device Control, or Scene Detect, chose those. Now, do you get an error message that "no suitable device is available?"
Do not know about a Mac, but on a PC, as soon as you turn on the properly plugged-in camera, one gets a double "bong" tone, and a pop-up that New Hardware has been detected, and is ready to use. I would assume that similar occurs on a Mac, but do not know that. Does your Mac "see" the camera? Are there any error, or warning messages associated with it?
Good luck, and wish that I knew the Mac OS better,
Hunt

Batch Capture con Premiere Pro 1.5

No se activa la opción de Batch Capture con lo que sólo puedo capturar de forma manual. Con otras versiones (6 y 6.5) no me ocurría este problema.
¿Alguien puede ayudarme?
Gracias.

Batch capture en Ppro1.5 es algo diferente que en 6.5
Desde la ventana de captura (F5) localizas la parte de clip que quieres capturar, marcas inpoint y outpoint y finalmente 'clicas' en Log Clip.
Esto crea un clip Offline en tu ventana de proyecto.
Cuando tienes todos los clips creados (en offline) los seleccionas y 'clicas' en Batch capture (F6). Premiere hace el resto.
Si no queda claro, lo puedo detallar más.
Saludos
Lluís

Capture Quality, Premiere Pro CS6

When I capture video through PP CS6, and check the properties of that captured clip, I see a seemingly arbitrary rating of "Quality = Least (1.00)"
When I capture video through AJA Machina, and Import that file into PP CS6, then look at the properties of that clip, it gives it a "Quality = Most (5.00)"
Can someone explain what this means? I would like to capture and do everything in just PP, but is the AJA Machina giving me better quality?
Attached are 2 screenshots:

I understand the difference between capturing and importing. Both clips were captured at one point in time. One with PP itself, and one with an oustide capture software, AJA Machina. Because one of the captured clips was captured with an ouside bit of software, it has to be imported into PP. That doesnt mean it was never captured. What I am trying to decide is, is there any difference between PP capturing, and AJA Machina capturing. From the properties tab itself, PP is telling me that there is something different: the aforementioned "Quality" section of said properties tab. The AJA screen shot also shows what Compressor was used (in this case AJA 2vuy 8-bit YUV 422.) Whereas the PP capture says "Compressor = " and its left blank.
I want to know why one says Quality = Most (5.00) and the other says Quality = Least (1.00) When every other setting was the same between the 2 capture devices. Same resolution, same frame rates, same pixel aspect ratio, same everything. Except this Quality section of the properties of each captured clip.
If this is a purely arbitrary tag in the properties tab, why have it?
(Refer back to screen shots)

Capturing in Premiere Pro

Similar Messages

Maybe you are looking for