Station Options - User Manager tab

Within the Station Options, I see the User Manager tab.  If I use the default configure location, the Users.ini file will live in C:\Program Files\National Instruments\TestStand 3.5\Cfg\Users.ini.  Is this where BOTH the development and target Users.ini file will live, or is this only the development location?  If this location applies only to the development, where is the target location specified?

That's correct.
All of my deployments, locally and at our contract manufacturers, are connected to a network. For the CM's we provide an inexpensive server that is connected to the CM's network. The testers are connected to a network provided by the server. All test results go to the server. That makes it easy for both the CM and my company to get test results. Also, the sequence files, test steps, model files, etc. are all deployed to the server. This makes it simple to update all testers at once and I don't have to worry that one tester out of several and 3 thousand miles away missed getting updated. Servers are cheap.

Similar Messages

  • Cisco SRP527w can't find User Management tab

    Hi,
    Can anyone help me? I just bought a new Cisco SRP527w and I'm just new on this kind of equipment. I can't locate the user management tab as I'm trying to change the default password.
    Also, I can't acess the internet. My dsl modem rj45 is connected  to the WAN/LAN port with IP Static settings. What did I missed here? your help is much appreciated.

    Hi Ronald,
    In this case, I would be inclined to suggest that you try to use the SRP in place of the Bayan modem - this may be easier than managing the modem configuration to get traffic to and from the SRP efficiently.  It's really your choice though at the end of the day.
    If you replace the modem with the SRP, try the following (I referred to the following post for information):
    Delete the second ADSL PVC you had configured above,
    Edit the configuration of the first PVC (PVC0) and select:
    Encapsulation = PPPoE
    Username is your BayanDSL username with @sod at the end (i.e. myusername@sod)
    Password is you BayanDSL password.
    Set your VPI/VCI manually to 8 and 33 (or possibly 8/35 as you had before).
    This should be enough.  The IP address that Bayan has assigned for you should be assigned automatically during PPP initiation.
    If this doesn't work, then it may be that your service is bound to the modem you have.
    Andy

  • Does TestStand 2.0 have a user manager accessible through the base deployment engine?

    I only see API calls to show add and edit users for the base deployment engine, but not a full user administrator like in the Sequence editor. Is this only available with the TestStand development env?

    Why do want to be able to edit users on every test station. You can make life simpler by putting your users.ini file in a network location and from Station Options>User Manager, point to that location. That way you only have to add users once and you can do that from the development system. Even if there's a reason to have different users for different stations, you could just copy the different users.ini files you create to the local TestStand directories on the test stations. I do that with the StationGlobals.ini file. I find it easier to have of my test stations use the same station globals. I define the unique ones as sequence file globals. When I do have to add a new station global, I take my local copy of StationGlobals.ini and just do a c
    opy to all of the test stations. Personally, I much prefer the fact that users and station globals can't be edited by the operator interface. That's just one less thing I have to worry about the test operators getting in and changing something.

  • Can not launch user manager

    Hello,
    I just installed Lookout 6.0 , the OS is Windows 2000, and not install
    any NI's DSC module. When choose the menu Options>>user manager
    and trying to launch it , there always popup an error message : could
    not start the user manager. Please advise what is wrong and how to
    repair it. Thanks.
    David

    This may help you... 
    http://digital.ni.com/public.nsf/allkb/6ABE5C9554F285D386256E9B0066156E
    -Khalid

  • Making Manager field in user details tab mandatory in GRC 10

    While raising the GRC Access request, I would like to make the Manager field madatory to be filled.  What is happening now,, the requestor is raising the request without manager field filled, and its not able to find the manager as per the route and the request get cancelled.
    Is there a option to modify the field to make it mandatory by red asterik as its there for other fields in user details tab.
    Response is appreciated.

    Hi ,
    Please Navigate to IMG > Governance, Risk and Compliance >  Access Control > User Provisioning > Maintain End User Personalization.
    There are four columns of fields that can be maintained:
    -  Default value
    - Mandatory
    - Editable
    - Visible
    By Choosing YES or NO from the dropdown list under the Mandatory field, any field on the Access Request screen can be made mandatory.
    Hope this helps.
    Vikas

  • Unable to see few options in User management console - Hyp S 9 SS

    In the User management console, unable to find the option "Add new user" under the browse pane 'User Directories'.
    Is there any changes required in the configuration ?
    Thanks

    Sandeep,
    Thanks for your reply
    I assume once the Hyperion system 9 Share services is configured for the particular user. The user management console should have the provision to "Add New users" to the "User Directory"
    I think this is not related to user/groups that we add in the analytic server security option.
    Since this is the administration activity in the HFM, this option should exist for the issue. To bring this option is there any feature/option that needs to installed ?
    Are you able to understand the situation ?
    Thanks

  • Test Package in Test Management tab of Change Document

    Hi Expert,
    When we test on CHARM, we realized that the test package in test management tab can only be
    attach before the developer change the status to "Pass normal change to
    test". Is this standard or can we do any configuration to allow the
    test package be attach during "Test for Preliminary Input" status?
    Thanks
    Best Regards
    Remy

    Hi,
    I manage to solve this issue as below,
    Go to SPRO
    >SAP Solution Manager Implementation Guide
    >SAP Solution Manager
    >Capabilities (Optional)
    >Change Control Management
    >Standard Configuration
    >Change Request Management Framework
    >Adjust UI objects by User Status
    Thanks
    Best Regards
    Remy

  • User management exception

    Dear All,
    I am getting the following exception when i click on the link locked users under user administration tab.
    User management exception
    An exception occured.inform your system administrator.
    suggested options
    Look at the log file for the cause for the error
    Which log file to be loooked up and i dont find any log file related to this at os level?
    1. Could you please let me know which is the log file?
    how to go about in fixing this issue.
    Appreciate your response

    Hi
    if you have a super admin rights then you can check your log files
    by following steps
    login to your portal and after loging in remove the irj/portal from the url and type nwa and it will navigate to one screen their you need to choose Monitoring and when you choose monitoring you will see another screen their you need to press on log files.
    ***********please reward points if the information is helpful to you*************

  • BPC Mass User Management Tool error in BPC 10

    Hello,
    I've downloaded tranport files from How to use BPC Mass User Management Tool in Netweaver. But Transport import fails with RC12 without any shortdump. ABAP program ZUJE_MASS_USER_MGMT is not created.
    Version used - BPC 10 CPMBPC 801 on Netweaver 7.4 .
    Thanks in advance for your inputs.

    Tried changing transport options but no luck. Transport failed with status RC12 without creating ABAP program. However, Old version transport files imported with error. But I could not find METHOD check_bpc_component_is_valid.
    Can anyone please send the updated program.
    *& Report  ZUJE_MASS_USER_MGMT
    *& Created By: Rich Heilman  SAP Labs, LLC
    *& Created On: 08/2/2010
    REPORT  zuje_mass_user_mgmt.
    TYPE-POOLS: abap, vrm.
    *       CLASS lcl_application DEFINITION
    CLASS lcl_application DEFINITION FINAL.
      PUBLIC SECTION.
        CONSTANTS: lc_comma TYPE char01 VALUE ',',
                   lc_pipe TYPE char01 VALUE '|',
                   lc_tab TYPE char10 VALUE 'TAB'.
        TYPES: BEGIN OF t_appldim,
                appl_id TYPE uj_appl_id,
                dimension TYPE uj_dim_name,
              END OF t_appldim.
        TYPES: BEGIN OF t_appldimmembers,
                appl_id TYPE uj_appl_id,
                dimension TYPE uj_dim_name,
                member TYPE uj_dim_member,
              END OF t_appldimmembers.
        CLASS-METHODS: file_f4 RETURNING value(r_file) TYPE string,
                       directory_f4 RETURNING value(r_path) TYPE string,
                       get_initial_directory RETURNING value(r_path) TYPE string,
                       set_delimiter_listbox,
                       set_delimiter,
                       export_users_to_file,
                       import_users_from_file,
                       export_teams_to_file,
                       import_teams_from_file,
                       export_team_assign_to_file,
                       import_team_assign_from_file,
                       export_task_profiles_to_file,
                       import_task_profiles_from_file,
                       export_mem_profiles_to_file,
                       import_mem_profiles_from_file,
                       export_tap_assign_to_file,
                       import_tap_assign_from_file,
                       export_map_assign_to_file,
                       import_map_assign_from_file,
                       get_appset_data IMPORTING i_appset_id TYPE uj_appset_id
                                       EXCEPTIONS appset_not_found .
      PRIVATE SECTION.
        CLASS-DATA: lv_appset_id TYPE uja_s_appset_info-appset_id.
        CLASS-DATA: lv_delimiter TYPE string.
        CLASS-DATA: ls_appset_info TYPE uja_s_appset_info.
        CLASS-DATA: lt_appl_info TYPE uja_t_appl_info.
        CLASS-DATA: lt_appl_dim TYPE TABLE OF t_appldim.
        CLASS-DATA: lt_members TYPE TABLE OF t_appldimmembers.
        CLASS-DATA: lt_teams_list TYPE uje_t_team.
        CLASS-DATA: lt_users_list TYPE uje_t_user.
        CLASS-DATA: lt_tprofs TYPE uje_t_api_profile_id.
        CLASS-DATA: lt_mprofs TYPE uje_t_api_profile_id.
        CLASS-DATA: lt_tasks TYPE uje_t_role_tskasg.
        CLASS-DATA: lt_roles TYPE uje_t_role.
        CLASS-DATA: lo_context TYPE REF TO if_uj_context.
        CLASS-DATA: lt_alv_messages TYPE uj0_t_message.
        CLASS-METHODS: set_global_context,
                       render_alv,
                       upload IMPORTING i_filepath TYPE any
                              RETURNING value(rt_strtab) TYPE stringtab,
                       download IMPORTING i_filepath TYPE any
                                         it_datatab TYPE STANDARD TABLE,
                       user_is_valid IMPORTING i_user_id TYPE any
                                     RETURNING value(r_boolean) TYPE abap_bool,
                       team_is_valid IMPORTING i_team_id TYPE any
                                     RETURNING value(r_boolean) TYPE abap_bool,
                       tprofile_is_valid IMPORTING i_profile_id TYPE any
                                         RETURNING value(r_boolean) TYPE abap_bool,
                       mprofile_is_valid IMPORTING i_profile_id TYPE any
                                         RETURNING value(r_boolean) TYPE abap_bool,
                       role_is_valid IMPORTING i_role_id TYPE any
                                     RETURNING value(r_boolean) TYPE abap_bool,
                       task_is_valid IMPORTING i_task_id TYPE any
                                     RETURNING value(r_boolean) TYPE abap_bool.
    ENDCLASS.                    "lcl_application DEFINITION
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS: p_export RADIOBUTTON GROUP grp1 DEFAULT 'X' USER-COMMAND chk.
    PARAMETERS: p_import RADIOBUTTON GROUP grp1.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS: p_appset TYPE uja_appset_info-appset_id.
    PARAMETERS: p_file TYPE string LOWER CASE.
    PARAMETERS: p_delmt TYPE char10 AS LISTBOX VISIBLE LENGTH 20
                           DEFAULT lcl_application=>lc_comma.  "delimiter
    SELECTION-SCREEN END OF BLOCK b2.
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
    PARAMETERS: p_eusers RADIOBUTTON GROUP grp2 MODIF ID exp.
    PARAMETERS: p_eteams RADIOBUTTON GROUP grp2 MODIF ID exp.
    PARAMETERS: p_eteama RADIOBUTTON GROUP grp2 MODIF ID exp.
    PARAMETERS: p_etprof RADIOBUTTON GROUP grp2 MODIF ID exp.
    PARAMETERS: p_emprof RADIOBUTTON GROUP grp2 MODIF ID exp.
    PARAMETERS: p_etprfa RADIOBUTTON GROUP grp2 MODIF ID exp.
    PARAMETERS: p_emprfa RADIOBUTTON GROUP grp2 MODIF ID exp.
    SELECTION-SCREEN END OF BLOCK b3.
    SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-004.
    PARAMETERS: p_iusers RADIOBUTTON GROUP grp3 MODIF ID imp.
    PARAMETERS: p_iteams RADIOBUTTON GROUP grp3 MODIF ID imp.
    PARAMETERS: p_iteama RADIOBUTTON GROUP grp3 MODIF ID imp.
    PARAMETERS: p_itprof RADIOBUTTON GROUP grp3 MODIF ID imp.
    PARAMETERS: p_improf RADIOBUTTON GROUP grp3 MODIF ID imp.
    PARAMETERS: p_itprfa RADIOBUTTON GROUP grp3 MODIF ID imp.
    PARAMETERS: p_imprfa RADIOBUTTON GROUP grp3 MODIF ID imp.
    SELECTION-SCREEN END OF BLOCK b4.
    INITIALIZATION.
      p_file = lcl_application=>get_initial_directory( ).
      lcl_application=>set_delimiter_listbox( ).
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF p_export = abap_true AND screen-group1 = 'IMP'.
          screen-active = '0'.
        ENDIF.
        IF p_import = abap_true AND screen-group1 = 'EXP'.
          screen-active = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    AT SELECTION-SCREEN.
      CASE abap_true.
        WHEN p_export.
          CLEAR: p_iusers, p_iteams, p_iteama, p_itprof,
                 p_improf, p_itprfa, p_imprfa.
        WHEN p_import.
          CLEAR: p_eusers, p_eteams, p_eteama, p_etprof,
                 p_emprof, p_etprfa, p_emprfa.
      ENDCASE.
      IF sy-ucomm <> 'CHK'.
        IF p_appset IS INITIAL.
          MESSAGE e001(00) WITH 'Please enter an AppSet Id'.
        ENDIF.
        IF p_file IS INITIAL.
          MESSAGE e001(00) WITH 'Please enter a valid directory or file'.
        ENDIF.
        IF p_delmt IS INITIAL.
          MESSAGE e001(00) WITH 'Please specify a delimiter'.
        ENDIF.
      ENDIF.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      CASE abap_true.
        WHEN p_export.  p_file = lcl_application=>directory_f4( ).
        WHEN p_import.  p_file = lcl_application=>file_f4( ).
      ENDCASE.
    START-OF-SELECTION.
      lcl_application=>set_delimiter( ).
      lcl_application=>get_appset_data(
                  EXPORTING
                       i_appset_id =  p_appset
                  EXCEPTIONS
                       appset_not_found  = 1 ).
      IF sy-subrc <> 0.
        RETURN.
      ENDIF.
      CASE abap_true.
        WHEN p_eusers.  lcl_application=>export_users_to_file( ).
        WHEN p_iusers.  lcl_application=>import_users_from_file( ).
        WHEN p_eteams.  lcl_application=>export_teams_to_file( ).
        WHEN p_iteams.  lcl_application=>import_teams_from_file( ).
        WHEN p_eteama.  lcl_application=>export_team_assign_to_file( ).
        WHEN p_iteama.  lcl_application=>import_team_assign_from_file( ).
        WHEN p_etprof.  lcl_application=>export_task_profiles_to_file( ).
        WHEN p_itprof.  lcl_application=>import_task_profiles_from_file( ).
        WHEN p_emprof.  lcl_application=>export_mem_profiles_to_file( ).
        WHEN p_improf.  lcl_application=>import_mem_profiles_from_file( ).
        WHEN p_etprfa.  lcl_application=>export_tap_assign_to_file( ).
        WHEN p_itprfa.  lcl_application=>import_tap_assign_from_file( ).
        WHEN p_emprfa.  lcl_application=>export_map_assign_to_file( ).
        WHEN p_imprfa.  lcl_application=>import_map_assign_from_file( ).
      ENDCASE.
    *       CLASS lcl_application IMPLEMENTATION
    CLASS lcl_application IMPLEMENTATION.
      METHOD file_f4.
        DATA: lt_file_table TYPE filetable.
        DATA: ls_file_table LIKE LINE OF lt_file_table.
        DATA: lv_rc TYPE sy-subrc.
        cl_gui_frontend_services=>file_open_dialog(
          CHANGING
            file_table = lt_file_table
            rc         = lv_rc ).
        CLEAR ls_file_table .
        READ TABLE lt_file_table INTO ls_file_table INDEX 1.
        IF sy-subrc  = 0.
          r_file = ls_file_table-filename.
        ENDIF.
      ENDMETHOD.                                                "file_f4
      METHOD directory_f4.
        cl_gui_frontend_services=>directory_browse(
            CHANGING
              selected_folder      = r_path
            EXCEPTIONS
              OTHERS               = 4 ).
      ENDMETHOD.                    "directory_f4
      METHOD upload.
        cl_gui_frontend_services=>gui_upload(
              EXPORTING
                filename = i_filepath
              CHANGING
                data_tab = rt_strtab
              EXCEPTIONS
                OTHERS   = 19 ).
        IF sy-subrc <> 0.
          MESSAGE e001(00) WITH 'File not found, check file path and name'.
        ENDIF.
        DELETE rt_strtab WHERE table_line IS INITIAL.
      ENDMETHOD.                    "upload
      METHOD download.
        DATA: lt_datatab TYPE stringtab.
        DATA: ls_datatab LIKE LINE OF lt_datatab.
        FIELD-SYMBOLS: <ls_data> TYPE ANY.
        FIELD-SYMBOLS: <lv_field> TYPE ANY.
    * Convert table to delimited string table
        LOOP AT it_datatab ASSIGNING <ls_data>.
          CLEAR ls_datatab.
          DO.
            ASSIGN COMPONENT sy-index
                             OF STRUCTURE <ls_data> TO <lv_field>.
            IF sy-subrc <> 0.
              EXIT.
            ENDIF.
            IF ls_datatab IS INITIAL.
              ls_datatab = <lv_field>.
            ELSE.
              CONCATENATE ls_datatab <lv_field>
                              INTO ls_datatab SEPARATED BY lcl_application=>lv_delimiter.
            ENDIF.
          ENDDO.
          APPEND ls_datatab TO lt_datatab.
        ENDLOOP.
        cl_gui_frontend_services=>gui_download(
           EXPORTING
             filename = i_filepath
           CHANGING
             data_tab = lt_datatab
           EXCEPTIONS
             OTHERS   = 24 ).
        IF sy-subrc <> 0.
          MESSAGE e001(00)
              WITH 'File not downloaded, check file path and name'.
        ENDIF.
      ENDMETHOD.                    "download
      METHOD get_initial_directory.
        cl_gui_frontend_services=>get_desktop_directory(
          CHANGING
            desktop_directory    = r_path ).
        cl_gui_cfw=>flush( ).
        CONCATENATE r_path '\*.csv' INTO r_path.
      ENDMETHOD.                    "get_initial_directory
      METHOD export_users_to_file.
        TYPES: BEGIN OF t_output,
                user_id TYPE uje_user-user_id,
                fullname TYPE uje_user-fullname,
                email TYPE uje_user-email,
               END OF t_output.
        DATA: lt_user_id TYPE uje_t_api_user_id.
        DATA: lt_users TYPE uje_t_user.
        DATA: ls_users LIKE LINE OF lt_users.
        DATA: lt_output TYPE TABLE OF t_output.
        DATA: ls_output LIKE LINE OF lt_output.
        lcl_application=>set_global_context( ).
        CALL FUNCTION 'UJE_API_GET_LIST_USERS'
          EXPORTING
            i_appset_id = lcl_application=>lv_appset_id
            is_user     = lcl_application=>lo_context->ds_user
            it_user_id  = lt_user_id
          IMPORTING
            et_user     = lt_users.
        REFRESH lt_output.
        LOOP AT lt_users INTO ls_users.
          MOVE-CORRESPONDING ls_users TO ls_output.
          APPEND ls_output TO lt_output.
        ENDLOOP.
    * Download table
        lcl_application=>download( EXPORTING i_filepath = p_file
                                             it_datatab = lt_output ).
      ENDMETHOD.                    "export_users_to_file
      METHOD import_users_from_file.
        DATA: lv_action TYPE uj_action.
        DATA: lv_success TYPE uj_bool.
        DATA: ls_user_info TYPE uje_s_userinfo.
        DATA: lt_messages TYPE uj0_t_message.
        DATA: ls_alv_messages LIKE LINE OF lt_alv_messages.
        DATA: lt_team_asin TYPE uje_t_user_team.
        DATA: lt_tprofiles TYPE uje_t_profile_id_act.
        DATA: lt_mprofiles TYPE uje_t_profile_id_act.
        DATA: lt_strtab TYPE stringtab.
        DATA: ls_strtab LIKE LINE OF lt_strtab.
        lt_strtab = lcl_application=>upload( p_file ).
        LOOP AT lt_strtab INTO ls_strtab.
          SPLIT ls_strtab AT lcl_application=>lv_delimiter INTO ls_user_info-user_id
                                      ls_user_info-fullname
                                      ls_user_info-email.
    * Check if user already exists, and set action accordingly.
          IF lcl_application=>user_is_valid( ls_user_info-user_id ) = abap_false.
            lv_action = 'I'.
          ELSE.
            lv_action = 'M'.
          ENDIF.
          CALL FUNCTION 'UJE_API_MANAGE_USER2'
            EXPORTING
              i_appset_id      = lcl_application=>lv_appset_id
              is_user          = lcl_application=>lo_context->ds_user
              is_user_info     = ls_user_info
              i_action         = lv_action
              it_team_asin     = lt_team_asin
              it_tprofile_id   = lt_tprofiles
              it_mprofile_id   = lt_mprofiles
            IMPORTING
              e_success        = lv_success
              et_message_lines = lt_messages.
          IF lv_success = 'Y'.
            CLEAR ls_alv_messages.
            ls_alv_messages-msgid = '00'.
            ls_alv_messages-msgty = 'S'.
            ls_alv_messages-msgno = '001'.
            CONCATENATE 'User ID' ls_user_info-user_id
                        'has been created/updated successfully'
                                INTO ls_alv_messages-message SEPARATED BY space.
            APPEND ls_alv_messages TO lt_alv_messages.
          ELSE.
            APPEND LINES OF lt_messages TO lt_alv_messages.
            CLEAR ls_alv_messages.
            ls_alv_messages-msgid = '00'.
            ls_alv_messages-msgty = 'E'.
            ls_alv_messages-msgno = '001'.
            CONCATENATE 'User ID' ls_user_info-user_id
                        'not created/updated due to error'
                                 INTO ls_alv_messages-message SEPARATED BY space.
            APPEND ls_alv_messages TO lt_alv_messages.
          ENDIF.
        ENDLOOP.
        lcl_application=>render_alv( ).
      ENDMETHOD.                    "create_users_from_file
      METHOD export_teams_to_file.
        TYPES: BEGIN OF t_output,
                team_id TYPE uje_s_team-team_id,
                description TYPE uje_s_team-description,
               END OF t_output.
        DATA: lt_teams TYPE uje_t_team.
        DATA: ls_teams LIKE LINE OF lt_teams.
        DATA: lt_output TYPE TABLE OF t_output.
        DATA: ls_output LIKE LINE OF lt_output.
        CALL FUNCTION 'UJE_API_GET_TEAMS'
          EXPORTING
            i_appset_id = lcl_application=>lv_appset_id
            is_user     = lcl_application=>lo_context->ds_user
          IMPORTING
            et_team     = lt_teams.
        REFRESH lt_output.
        LOOP AT lt_teams INTO ls_teams.
          MOVE-CORRESPONDING ls_teams TO ls_output.
          APPEND ls_output TO lt_output.
        ENDLOOP.
    * Download table
        lcl_application=>download( EXPORTING i_filepath = p_file
                                             it_datatab = lt_output ).
      ENDMETHOD.                    "export_teams_to_file
      METHOD import_teams_from_file.
        DATA: lv_action TYPE uj_action.
        DATA: lv_success TYPE uj_bool.
        DATA: ls_team TYPE uje_s_team.
        DATA: lt_messages TYPE uj0_t_message.
        DATA: ls_alv_messages LIKE LINE OF lt_alv_messages.
        DATA: lt_users TYPE uje_t_user_team.
        DATA: lt_tprofiles TYPE uje_t_profile_id_act.
        DATA: lt_mprofiles TYPE uje_t_profile_id_act.
        DATA: lt_strtab TYPE stringtab.
        DATA: ls_strtab LIKE LINE OF lt_strtab.
        lt_strtab = lcl_application=>upload( p_file ).
        LOOP AT lt_strtab INTO ls_strtab.
          SPLIT ls_strtab AT lcl_application=>lv_delimiter INTO ls_team-team_id
                                      ls_team-description.
    * Check if team is already a valid team, set action appropriatly
          IF lcl_application=>team_is_valid( ls_team-team_id ) = abap_false.
            lv_action = 'I'.
          ELSE.
            lv_action = 'M'.
          ENDIF.
          CALL FUNCTION 'UJE_API_MANAGE_TEAM2'
            EXPORTING
              i_appset_id      = lcl_application=>lv_appset_id
              is_user          = lcl_application=>lo_context->ds_user
              is_team          = ls_team
              i_action         = lv_action
              it_users         = lt_users
              it_tprofile_id   = lt_tprofiles
              it_mprofile_id   = lt_mprofiles
            IMPORTING
              e_success        = lv_success
              et_message_lines = lt_messages.
          IF lv_success = 'Y'.
            CLEAR ls_alv_messages.
            ls_alv_messages-msgid = '00'.
            ls_alv_messages-msgty = 'S'.
            ls_alv_messages-msgno = '001'.
            CONCATENATE 'Team' ls_team-team_id
                         'has been created/updated successfully'
                             INTO ls_alv_messages-message SEPARATED BY space.
            APPEND ls_alv_messages TO lt_alv_messages.
          ELSE.
            APPEND LINES OF lt_messages TO lt_alv_messages.
            CLEAR ls_alv_messages.
            ls_alv_messages-msgid = '00'.
            ls_alv_messages-msgty = 'E'.
            ls_alv_messages-msgno = '001'.
            CONCATENATE 'Team' ls_team-team_id
                        'not created/updated due to error'
                              INTO ls_alv_messages-message SEPARATED BY space.
            APPEND ls_alv_messages TO lt_alv_messages.
          ENDIF.
        ENDLOOP.
        lcl_application=>render_alv( ).
      ENDMETHOD.                    "create_teams_from_file
      METHOD export_team_assign_to_file.
        TYPES: BEGIN OF t_user_assign,
                user_id TYPE uje_s_user_team-user_id,
                team_id TYPE uje_s_user_team-team_id,
                teamleader TYPE uje_s_user_team-teamleader,
               END OF t_user_assign.
        DATA: lt_user_det TYPE uje_t_user_detail.
        DATA: ls_user_det LIKE LINE OF lt_user_det.
        DATA: ls_user_team TYPE uje_s_user_team.
        DATA: lt_team_assign TYPE TABLE OF t_user_assign.
        DATA: ls_team_assign LIKE LINE OF lt_team_assign.
        CALL FUNCTION 'UJE_API_GET_USERDATA'
          EXPORTING
            i_appset_id = lcl_application=>lv_appset_id
            is_user     = lcl_application=>lo_context->ds_user
          IMPORTING
            et_user     = lt_user_det.
        LOOP AT lt_user_det INTO ls_user_det.
          LOOP AT ls_user_det-t_team_id INTO ls_user_team.
            MOVE-CORRESPONDING ls_user_team TO ls_team_assign.
            APPEND ls_team_assign TO lt_team_assign.
          ENDLOOP.
        ENDLOOP.
    * Download table
        lcl_application=>download( EXPORTING i_filepath = p_file
                                             it_datatab = lt_team_assign ).
      ENDMETHOD.                    "export_team_assign_to_file
      METHOD import_team_assign_from_file.
        TYPES: BEGIN OF t_user_assign,
                user_id TYPE uje_s_user_team-user_id,
                team_id TYPE uje_s_user_team-team_id,
                teamleader TYPE uje_s_user_team-teamleader,
               END OF t_user_assign.
        DATA: lv_success TYPE uj_bool.
        DATA: lt_user_team_temp TYPE uje_t_user_team.
        DATA: ls_user_team_temp TYPE uje_s_user_team.
        DATA: lt_user_team TYPE uje_t_user_team.
        DATA: ls_user_team TYPE uje_s_user_team.
        DATA: ls_team_assign TYPE uje_s_user_team.
        DATA: lt_messages TYPE uj0_t_message.
        DATA: ls_alv_messages LIKE LINE OF lt_alv_messages.
        DATA: lt_tprofiles TYPE uje_t_profile_id_act.
        DATA: ls_tprofiles LIKE LINE OF lt_tprofiles.
        DATA: lt_mprofiles TYPE uje_t_profile_id_act.
        DATA: ls_mprofiles LIKE LINE OF lt_mprofiles.
        DATA: lt_tprofile_ids TYPE uje_t_api_profile_id.
        DATA: ls_tprofile_ids LIKE LINE OF lt_tprofile_ids.
        DATA: lt_mprofile_ids TYPE uje_t_api_profile_id.
        DATA: ls_mprofile_ids LIKE LINE OF lt_mprofile_ids.
        DATA: lt_strtab TYPE stringtab.
        DATA: ls_strtab LIKE LINE OF lt_strtab.
        DATA: ls_teams_list LIKE LINE OF lt_teams_list.
        lt_strtab = lcl_application=>upload( p_file ).
        LOOP AT lt_strtab INTO ls_strtab.
          SPLIT ls_strtab AT lcl_application=>lv_delimiter INTO ls_team_assign-user_id
                                      ls_team_assign-team_id
                                      ls_team_assign-teamleader.
          CLEAR ls_user_team.
          ls_user_team-user_id = ls_team_assign-user_id.
          ls_user_team-team_id = ls_team_assign-team_id.
          ls_user_team-teamleader = ls_team_assign-teamleader.
          TRANSLATE ls_user_team-teamleader USING 'YXyX1XxXN n 0 '. "Translate to X or space
          APPEND ls_user_team TO lt_user_team.
          IF lcl_application=>team_is_valid( ls_team_assign-team_id ) = abap_false.
            CLEAR ls_alv_messages.
            ls_alv_messages-msgid = '00'.
            ls_alv_messages-msgty = 'E'.
            ls_alv_messages-msgno = '001'.
            CONCATENATE 'Team' ls_team_assign-team_id 'does not yet exist.'
                        'No user assigments done.'
                              INTO ls_alv_messages-message SEPARATED BY space.
            APPEND ls_alv_messages TO lt_alv_messages.
            lcl_application=>render_alv( ).
            RETURN.
          ENDIF.
          IF lcl_application=>user_is_valid( ls_team_assign-user_id ) = abap_false.
            CLEAR ls_alv_messages.
            ls_alv_messages-msgid = '00'.
            ls_alv_messages-msgty = 'E'.
            ls_alv_messages-msgno = '001'.
            CONCATENATE 'User' ls_team_assign-user_id 'does not yet exist.'
                        'No user assigments done.'
                              INTO ls_alv_messages-message SEPARATED BY space.
            APPEND ls_alv_messages TO lt_alv_messages.
            lcl_application=>render_alv( ).
            RETURN.
          ENDIF.
        ENDLOOP.
        LOOP AT lcl_application=>lt_teams_list INTO ls_teams_list.
          REFRESH lt_user_team_temp.
          REFRESH lt_tprofile_ids.
          REFRESH lt_mprofile_ids.
    * Check that there is data for team assignment, otherwise skip
          READ TABLE lt_user_team TRANSPORTING NO FIELDS
                            WITH KEY team_id = ls_teams_list-team_id.
          IF sy-subrc <> 0.
            CONTINUE.
          ENDIF.
    * Get existing team data for this team.
          CALL FUNCTION 'UJE_API_GET_TEAMDATA'
            EXPORTING
              i_appset_id    = lcl_application=>lv_appset_id
              is_user        = lcl_application=>lo_context->ds_user
              i_team_id      = ls_teams_list-team_id
            IMPORTING
              et_user_team   = lt_user_team_temp
              et_tprofile_id = lt_tprofile_ids
              et_mprofile_id = lt_mprofile_ids.
    * Update with new users.
          LOOP AT lt_user_team INTO ls_user_team
                           WHERE team_id = ls_teams_list-team_id.
            MOVE-CORRESPONDING ls_user_team TO ls_user_team_temp.
            APPEND ls_user_team_temp TO lt_user_team_temp.
          ENDLOOP.
    * Keep existing profiles.
          REFRESH lt_tprofiles.
          LOOP AT lt_tprofile_ids INTO ls_tprofile_ids.
            ls_tprofiles-profile_id = ls_tprofile_ids-profile_id.
            APPEND ls_tprofiles TO lt_tprofiles.
          ENDLOOP.
          REFRESH lt_mprofiles.
          LOOP AT lt_mprofile_ids INTO ls_mprofile_ids.
            ls_mprofiles-profile_id = ls_mprofile_ids-profile_id.
            APPEND ls_mprofiles TO lt_mprofiles.
          ENDLOOP.
    * now update the user/team assignments
          CALL FUNCTION 'UJE_API_MANAGE_TEAM2'
            EXPORTING
              i_appset_id      = lcl_application=>lv_appset_id
              is_user          = lcl_application=>lo_context->ds_user
              is_team          = ls_teams_list
              i_action         = 'M'
              it_users         = lt_user_team_temp
              it_tprofile_id   = lt_tprofiles
              it_mprofile_id   = lt_mprofiles
            IMPORTING
              e_success        = lv_success
              et_message_lines = lt_messages.
          IF lv_success = 'Y'.
            CLEAR ls_alv_messages.
            ls_alv_messages-msgid = '00'.
            ls_alv_messages-msgty = 'S'.
            ls_alv_messages-msgno = '001'.
            CONCATENATE 'Team' ls_teams_list-team_id 'user assignments'
                        'have been updated successfully'
                             INTO ls_alv_messages-message SEPARATED BY space.
            APPEND ls_alv_messages TO lt_alv_messages.
          ELSE.
            APPEND LINES OF lt_messages TO lt_alv_messages.
            CLEAR ls_alv_messages.
            ls_alv_messages-msgid = '00'.
            ls_alv_messages-msgty = 'E'.
            ls_alv_messages-msgno = '001'.
            CONCATENATE 'Team' ls_teams_list-team_id 'user assignments'
                        'not updated due to error'
                             INTO ls_alv_messages-message SEPARATED BY space.
            APPEND ls_alv_messages TO lt_alv_messages.
          ENDIF.
        ENDLOOP.
        lcl_application=>render_alv( ).
      ENDMETHOD.                    "import_team_assign_from_file
      METHOD export_task_profiles_to_file.
        TYPES: BEGIN OF t_output,
                identifier TYPE char01, " Row Identifer
                profile TYPE uj_profile_id,
                values TYPE string,
               END OF t_output.
        DATA: ls_tprofs LIKE LINE OF lt_tprofs.
        DATA: lv_profile TYPE uj_profile_id.
        DATA: ls_profile TYPE uje_s_profile.
        DATA: lt_role_id TYPE uje_t_api_role_id.
        DATA: ls_role_id LIKE LINE OF lt_role_id.
        DATA: lt_task_info TYPE  uje_t_task_info.
        DATA: ls_task_info LIKE LINE OF lt_task_info.
        DATA: lt_users_asin TYPE uje_t_api_user_id.
        DATA: ls_users_asin LIKE LINE OF lt_users_asin.
        DATA: lt_teams_asin TYPE uje_t_api_team_id.
        DATA: ls_teams_asin LIKE LINE OF lt_teams_asin.
        DATA: lt_output TYPE TABLE OF t_output.
        DATA: ls_output LIKE LINE OF lt_output.
        LOOP AT lcl_application=>lt_tprofs INTO ls_tprofs.
          lv_profile = ls_tprofs-profile_id.
    * Get relevant data for task profile
          CLEAR ls_profile.
          REFRESH: lt_role_id, lt_task_info, lt_users_asin, lt_teams_asin.
          CALL FUNCTION 'UJE_API_GET_TPROFILEDATA2'
            EXPORTING
              i_appset_id  = lcl_application=>lv_appset_id
              is_user      = lcl_application=>lo_context->ds_user
              i_profile_id = lv_profile
            IMPORTING
              es_profile   = ls_profile
              et_role_id   = lt_role_id
              et_task_info = lt_task_info
              et_user_id   = lt_users_asin
              et_team_id   = lt_teams_asin.
    * Write Header row
          CLEAR ls_output.
          ls_output-identifier = 'H'.
          ls_output-profile  = lv_profile.
          ls_output-values = ls_profile-description.
          APPEND ls_output TO lt_output.
    * Write task assigments
          CLEAR ls_output.
          ls_output-identifier = 'K'.
          ls_output-profile  = lv_profile.
          LOOP AT lt_task_info INTO ls_task_info.
            ls_output-values = ls_task_info-task_id.
            APPEND ls_output TO lt_output.
          ENDLOOP.
    * Write role assigments
          CLEAR ls_output.
          ls_output-identifier = 'R'.
          ls_output-profile  = lv_profile.
          LOOP AT lt_role_id INTO ls_role_id.
            ls_output-values = ls_role_id-role_id.
            APPEND ls_output TO lt_output.
          ENDLOOP.
    * Write user assignments
          CLEAR ls_output.
          ls_output-identifier = 'U'.
          ls_output-profile  = lv_profile.
          LOOP AT lt_users_asin INTO ls_users_asin.
            ls_output-values = ls_users_asin-user_id.
            APPEND ls_output TO lt_output.
          ENDLOOP.
    * Write team assignments
          CLEAR ls_output.
          ls_output-identifier = 'T'.
          ls_output-profile  = lv_profile.
          LOOP AT lt_teams_asin INTO ls_teams_asin.
            ls_output-values = ls_teams_asin-team_id.
            APPEND ls_output TO lt_output.
          ENDLOOP.
        ENDLOOP.
    * Download table
        lcl_application=>download( EXPORTING i_filepath = p_file
                                             it_datatab = lt_output ).
      ENDMETHOD.                    "export_task_profiles_to_file
      METHOD import_task_profiles_from_file.
        TYPES: BEGIN OF t_input,
                identifier TYPE char01, " Row Identifer
                profile TYPE uj_profile_id,
                values TYPE string,
               END OF t_input.
        TYPES: BEGIN OF t_task_profile,
                profile TYPE uje_s_profile,
                roles TYPE uje_t_api_role_id,
                task_info TYPE uje_t_task_info,
                users_asin TYPE uje_t_api_user_id,
                teams_asin TYPE uje_t_api_team_id,
               END OF t_task_profile.
        DATA: lt_task_profile TYPE TABLE OF t_task_profile.
        DATA: ls_task_profile LIKE LINE OF lt_task_profile.
        DATA: ls_alv_messages LIKE LINE OF lt_alv_messages.
        DATA: lt_messages TYPE uj0_t_message.
        DATA: lv_action TYPE uj_action.
        DATA: lv_success TYPE uj_bool.
        DATA: lv_last_profile TYPE uj_profile_id.
        DATA: lt_role_id TYPE uje_t_api_role_id.
        DATA: ls_role_id LIKE LINE OF lt_role_id.
        DATA: lt_task_info TYPE  uje_t_task_info.
        DATA: ls_task_info LIKE LINE OF lt_task_info.
        DATA: lt_users_asin TYPE uje_t_api_user_id.
        DATA: ls_users_asin LIKE LINE OF lt_users_asin.
        DATA: lt_teams_asin TYPE uje_t_api_team_id.
        DATA: ls_teams_asin LIKE LINE OF lt_teams_asin.
        DATA: lt_strtab TYPE stringtab.
        DATA: ls_strtab LIKE LINE OF lt_strtab.
        DATA: lt_input TYPE TABLE OF t_input.
        DATA: ls_input LIKE LINE OF lt_input.
        DATA: lt_obj_asin TYPE uje_t_profile_asin.
        DATA: ls_obj_asin LIKE LINE OF lt_obj_asin.
        DATA: lt_task_asin TYPE uje_t_task_id_act.
        DATA: ls_task_asin LIKE LINE OF lt_task_asin.
    * Upload file
        lt_strtab = lcl_application=>upload( p_file ).
    * Rip import file into internal table
        LOOP AT lt_strtab INTO ls_strtab.
          CLEAR ls_input.
          SPLIT ls_strtab AT lcl_application=>lv_delimiter INTO ls_input-identifier
                                      ls_input-profile
                                      ls_input-values.
          APPEND ls_input TO lt_input.
        ENDLOOP.
    * Build profile table containing all associated data
        SORT lt_input STABLE ASCENDING BY profile identifier values.
        LOOP AT lt_input INTO ls_input.
          IF ls_input-profile <> lv_last_profile
              AND lv_last_profile IS NOT INITIAL.
            APPEND ls_task_profile TO lt_task_profile.
            CLEAR ls_task_profile.
          ENDIF.
    * Based on record identifier
          CASE ls_input-identifier.
            WHEN 'H'.  " Header
              ls_task_profile-profile-profile_id  = ls_input-profile.
              ls_task_profile-profile-description = ls_input-values.
            WHEN 'K'.  " Task info
              SPLIT ls_input-values AT lcl_application=>lv_delimiter INTO ls_task_info-task_id
                                                ls_task_info-description.
              IF lcl_application=>task_is_valid( ls_task_info-task_id ) = abap_false.
                CLEAR ls_alv_messages.
                ls_alv_messages-msgid = '00'.
                ls_alv_messages-msgty = 'E'.
                ls_alv_messages-msgno = '001'.
                CONCATENATE 'Task ID' ls_task_info-task_id  'is not valid.'
                            'No task profile updates done.'
                                    INTO ls_alv_messages-message SEPARATED BY space.
                APPEND ls_alv_messages TO lt_alv_messages.
                lcl_application=>render_alv( ).
                RETURN.
              ENDIF.
              APPEND ls_task_info TO ls_task_profile-task_info.
            WHEN 'R'.  " Roles
              ls_role_id = ls_input-values.
              IF lcl_application=>role_is_valid( ls_role_id ) = abap_false.
                CLEAR ls_alv_messages.
                ls_alv_messages-msgid = '00'.
                ls_alv_messages-msgty = 'E'.
                ls_alv_messages-msgno = '001'.
                CONCATENATE 'Role ID' ls_role_id   'is not valid.'
                       

  • User Manager Priviledge

    Within TestStand's Sequence Editor, with the User Manager, I added a user and gave him the Operate::Grant All privilege.  I also have an Admin that requires a password.  When I run my OI, I'm wondering why (when I login as the Operator) in the Configure menu, the Adapters, Station Options, Search Directories are all shown as selectable items.  However, when selected, all the drop downs and or edit fields are either greyed out of inactive.  First of all, why would an operator be allowed to configure these types of items.  Second, in my application, I really don't want an operator to muck with such things - how do I either grey them all out or not show them at all?  As additional info, I'm working with the LabVIEW8 version of the TestStand Operator Interface - I'm trying to customize it in several areas.

    mrbean -
    The TestStand 3.5 and earlier sequence editors do not allow you to customize which menus are available or visible. The only options are the ones based on the user priviledges defined for each user. Typically for these types of customizations, customers create their own operator interface using the development environment of their choice and use the TestStand OI Controls to implement the bulk of how the OI displays sequence files and executions.  We hope to allow for more customization of the sequence editor in a future release.
    Scott Richardson
    National Instruments

  • User Management - How to submit Additional Access Request on behalf of employee

    User Management - how can we configure "Access Requests" so that Managers can submit Additional Access Requests, or Initial Access Requests on behalf of employee?
    Have looked at "Manage Proxies" but this seems to allow access to everything - not ideal
    Please assist with knowledge and/or experience
    Many Thanks
    Me

    Additional Access Request Registration Process is complete
    Giving access to User Management to users is not an option.
    What I would like is the scenario below - is this achievable?
    When employee goes to iProcurement > Preferences > Access Requests > Request Access | they can submit an access request on behalf of themselves.
    Would like an option where a manager, navigates to same UI as above, has option to choose a subordinate, and request additional access on their behalf
    The table UMX_REG_REQUESTS has columns REQUESTED_FOR_USER_ID & REQUESTED_BY_USER_ID - so it seems they don't have to be same person (manager can submit request on behalf of an employee)
    Can this be achieved through UI for "Access Requests"?

  • Using Jackrabbit User Manager programmatically for changing passwords and getting user data.

    I am trying to do a change password request using the Jackrabbit User Manager with the REST URL /system/userManager/user/<username>.changePassword.json.  The problem I am having is that this request requires an oldPwd form param in the request.  The issue is that when I am trying to do this request it is in response to the user selecting "Forgot Password" so our logic has created a random password which we then email to the user so they can use that the next time they want to login.  We need to change that user's password in CRX so they can log in using it next time.  Since they haven't logged in there is no session, NOT the problem.  THE PROBLEMS, I don't know 1. how to use the userManager to get that user's old password, since /system/userManager/user/<username>.json doesn't appear to return the password and 2. if I could get the old password it most certainly will be encoded, some how, so I will need some decoding algorithm to pass it through in order to get the actual password to set as the oldPwd form param to my change password request.  Please let me know if you require any further explanation.  Any assistance would be greatly appreciated.  Thank you, in advance, for your assistance.
    Sincerely,
    Mike Sucena
    [email protected]

    Hi Mike,
    msucena wrote:
    Justin:
    Does your response mean that until version 2.1.2 of Jackrabbit User Manager is released I cannot change the password without knowing the old password?
    No. It means that this feature is not available in version 2.1.0 of the Sling Jackrabbit User Manager bundle. It was added after that release. You have a number of options:
    Build the bundle from source.
    Use one of the SNAPSHOT bundles available from the Apache Snapshots repository.
    Use the release which is being voted upon now (https://repository.apache.org/content/repositories/orgapachesling-175/org/apache/sling/org .apache.sling.jcr.jackrabbit.usermanager/2.2.0/). (Note - we decided to use 2.2.0 as the version number rather than 2.1.2 as originally planned due to the scope of this release).
    Write a different servlet which performs the same actions.
    Meaning that being able to use either the credentials of the "Admin" user or using the credentials of a member of the "UserAdmin" group is not supported in the current released version 2.1.0?
    Correct. It was added after the 2.1.0 release.
      If I currently need the old password is there any Sling REST - Jackrabbit API call I can use in order to get the old password since using /system/userManager/user/<username>.json doesn't appear to return the password?
    -Mike
    The plain text password is not stored. And this should be considered a good thing.
    If you have questions about the development process we follow in Sling (or at Apache as a whole), by all means ask on the Sling users mailing list. It is reasonably well-established and we love to talk about it.

  • I cant access my application control in user management cosole( shared svcs

    Hi all.. A bit confused....... I just migrated users and groups to Shared Services.......from essbase adminstration server and essbase server.....While migrating to shared services I created a password ( lets assume 'yyyyy') for Essbase Administration Server and Essbase Server.. Well I dont have much more users... the only user for EAS server is default one which is username/password ='admin/password'. For Essbase Server username/password=xxxxxx/xxxxxxx. But after migrating users and groups to shared services mode when I tried to login with these passwords Iam unable to login....... Then I tried to login with my old username/password..... it was successfull..
    The problem is when Iam trying to assign access control to application in "user management cosole"....... it is showing the error" login failed due to invalid login credentials". And also I cant access Business Rules it is throwing the error"Refer to security guide to configure security permission for this application"...........?
    Any Idea....... What should do ?
    Thanks and Regards,
    Sri-Oracle.
    Edited by: Sri-Oracle on May 6, 2009 11:16 AM

    Hi John......Thanks for your reply....
    I did as you said but still no hope... I think Iam making a mistake at some point.... But I dont know what is it.
    The Sequence what I did was
    1.Started the Essbase Server (with old username/password....as it shows only one user name while it starts).
    2.Started the Essbase Administrative Server.
    3.Start the EAS console...... with the old username/password=admin/password.
    4.In the enterprise view I right click on the Administrative server>Externalise users> But it says "There are no users available for migration". So it seems my EAS server security has been converted to Shared Services security mode..So where can i use my new password when I created while migrating to shared services? and what is the username is it admin or some other?
    5.In the enterprise view I right clicked on the essbase server. I removed the current Essbase Server. Then I tried to add Essbase Server.. Here I can see the checkbox for "Use External Authentication". So it means my essbase server has been externalised.. Well Here is the problem..When the check box is enabled it shows only username that is admin.....and password field is not highlighted.. When I click these it says" Login fails due to invalid credentials"....But I can log in (Add Esbase Server) with uncheck the "use external authentication" check box and entered the details of my old username and NEW PASSWORD which is created while migrating ESSBASE SERVER to Shared Services... then it works..........
    After these prolonged process also I cant go with access control option for applications in User Managemnet Console...........
    Thanks and Regards,
    Sri-Oracle

  • IN ODS Object Manage tab?

    hello all
    In ods object manage tab in "<b>REQUEST</b>" tab there are options like <b>request</b>,<b>data mart status of the request,PSA ID request is generated with Activation,Technical Status</b> and so on?
    what do v mean by this?
    1.data mart status of the request(when this will generate)
    2.PSA ID request is generated with Activation(when this will generate)and
    3.Technical Status
    many thanks
    balaji

    hi AHP
    thanks for given info., but in that link  I could'nt able to get info regarding this can u tell why this is needed  "<b>PSA ID REQUEST IS GENERATED WITH ACTIVATION</b>"
    and "<b>TECHNICAL STATUS</b>".
    many thanks
    balaji

  • Roles appearing in User managment but not in Users Form

    I have used the WF_LOCAL_SYNCH.propagateUserRole API to add roles to new and existing users in our production instance. That seemed to go well.
    When I view that user through the user management screen I see that he has the role assigned to them. Yet when he logs on he cannot see the role. When I view the user through the user form the indirect responsibility is not showing up.
    We have run the Workflow Directory Services User/Role Validation against the user with the following parameters:
    p_BatchSize – 10000 (Default Value 10000)
    p_Check_Dangling – Yes (Default value No)
    Add missing user/role assignments – Yes (Default Value No)
    Update WHO columns in WF tables – No (Default Value No)
    That has worked for some people but not all.
    Does anyone know what is going on or how to fix this?

    this you can find in Web console
    configuration>>user configuration>>action>>attributes
    I am able to add attribute but not able to make field as mandatory,while creating attribute we are not getting option like that you want this field mandatory or not but while modifying the attribute we are getting option like required field radio button if i select that i am getting error "you cant change an attribute to required unless all the user have value for this field"

Maybe you are looking for