Catalog issue

Hi, I'm running a Lightroom 5.7 on a Mac (OS,X,10.7.5) and have a problem with a catalog. The catalog opens and I can see all of my images with all adjustments but when I try to do any work on them (i.e. spot removal) I get a message saying "Lightroom encountered an error when reading a catalog file and needs to quit. Lightroom will attempt to diagnose the problem the next time it launches." I then get a message saying "Lightroom encountered an error when reading a catalog file and needs to quit." and the whole problem begins again. I don't have access to previous recent backup and I've tried backing up the catalog to a different folder and drive...is there anything I can do? PS I'm not good with computers/software so if anyone can help please keep it as simple as possible and not too technical.

There are limitations....
see:
http://www.sc.ehu.es/siwebso/KZCC/Oracle_10g_Documentacion/server.101/b10734/rcmtspit.htm
Limitations of TSPITR Without a Recovery Catalog
If you do not use a recovery catalog when performing TSPITR, then note the following special restrictions:
The undo segments at the time of the TSPITR must be part of the auxiliary set. Because RMAN has no historical record of the undo in the control file, RMAN assumes that the current rollback or undo segments were the same segments present at the time to which recovery is performed. If the undo segments have changed since that time, then TSPITR will fail.
TSPITR to a time that is too old may not succeed if Oracle has reused the control file records for needed backups. (In planning your database, set the CONTROL_FILE_RECORD_KEEP_TIME initialization parameter to a value large enough to ensure that control file records needed for TSPITR are kept.)
When not using a recovery catalog, the current control file has no record of the older incarnation of the recovered tablespace. Thus, recovery with a current control file that involves this tablespace can no longer use a backup taken prior to time t. You can, however, perform incomplete recovery of the whole database to any time less than or equal to t, if you can restore a backup control file from before time t.
It is extremely important that you choose the right target time or SCN for your TSPITR. As noted already, once you bring a tablespace online after TSPITR, you cannot use any backup from a time earlier than the moment you brought the tablespace online. In practice, this means that you cannot make a second attempt at TSPITR if you choose the wrong target time the first time, unless you are using a recovery catalog. (If you have a recovery catalog, however, you can perform repeated TSPITRs to different target times.)
Edited by: tychos on 16-Jul-2009 07:27

Similar Messages

  • Strange Catalog Issue or bug. Help, photos disappeared help?

    My images disappeared in the catalog. They are not missing, they are just not visable. I think there is a bug in the Fliter section.
    Let me explain. I have one Main folder with 5 Sub folders. All those folders contain random amounts of images. (i.e. the path would be...  Photo/2010/BeachShoot, or Photo/2008/PartyPics... etc).
    I imported 5 years of images, hence 5 Sub Folders. I was randomly flagging images to be rejected with the 'x' key. Basically routine maintenance... flag so many, then call up only the rejected photos in the grid view, select all, then delete. Remove the Flag Filter... repeat process over and over...   Basic, simple work...
    Now... doing the exact some thing.. I removed all Flag filters and my images are no longer appearing in the catalog. I tested, by turning on flags, off flags.. etc. The images did not accidentally get deleted. I checked my hard drive location. Images are there. I rebooted the machine, I opened up another catalog, to trick it back... did not work. I tried to re-import the images.. but it says they are already in the catalog.
    Strange part: On the Left Sidebar window, under Catalog "All Photographs" it shows the correct number of photos in the catalog. However... the strange part... Under "Folders" in the Left Sidebar beneath Catalogs my Main Folder shows "Zero" number of images. But, if I click on a sub root folder where the images reside, they number changes from Zero to the correct number of images and my images reappear on the screen as normal..
    The work around... click on every subfolder...
    The solution... Unsure? Help!
    john
    Strange Catalog Issue or bug. Help, photos disappeared help?
    System: Mac OS X 10.7.2
    Lightroom 3.6

    We all get there sometimes Glad it was so easy!
    Beat

  • Lightroom 5 Catalog Issues

    I've been a LR user since v2 and I've never had any significant catalog issues until LR5.  This isn't so much of a question, more of a statement which I am hoping someone at Adobe reads.  The issues I've recently encountered are as follows...
    Issue 1)  LR5 fails to import Panoramas created in Photoshop CC
    - Select several photos in LR5, right-click and select Merge to Panorama in Photoshop.
    - Once pano is created, click save in Photoshop and then exit.
    - Merged photos fail to appear in LR5.
    - In Finder, navigate to folder and verify newly created panos are saved (as PSDs) in the same folder as source images = Yes
    - In Photoshop, verify "Maximize Compaitibility" setting is checked = Yes
    - In LR open the Import dialog to attempt to import the missing Pano just created.  The pano image is found but is grayed out and I am presented with a message that the photo already exists in the library.
    - Attempt to syncronize folder... LR thinks all 10 photos are missing but sees 11 new photos to add (11 because the of the pano).  Syncronization removes the 10, then adds them back to the catalog but fails to add the 11th, the Pano file.  Successive attempts at sychronizing the folders yield the exact same results (see Issue 2).
    Issue 2)  LR5 thinks all my photos are missing (photo missing message under histogram)
    - Attempts to syncronize a folder yield 100 missing photo and 100 new photos found (100 is just an example).
    - Syncronization removes the missing photos and adds the exact same photo right back to the catalog, however the problems persists.
    - Successive attempts to synchronize the folder yield the exact same results (100 photos missing and removed, 100 new photos added).  LR is stuck in a loop.
    Issue 3) LR5 not creating the correct folder in my folder structure on import.
    - Import is configured to create a new folder for each day (e.g. 2013-07-25) within a year folder (e.g 2013).
    - Upon import LR5 tells confirms it will create a 2013-07-25 folder within the 2013 folder, however upon import the it is actually created in the root photos folder at the same level at the 2013 folder.  In other words, Photos/2013-07-25/ instead of Photos/2013/2013-07-25.
    No photos were ever moved.  No changes to the folder structure were made inside or outside of LR.  And no changes to import pre-sets have been made.
    I've seen issue number 2 on two seperate computers with completely different catalogs.
    I was able to resolve my issues somewhat by importing new photos and manually specifying where in my 2013 folder they are to be stored.  Doing so seemed to remind LR where my photos were and the issues listed above appear to be resolved for now.  That said, I am still receiving the "Photo is Missing" error under the histogram, although the photo counts when I attempt to synchronize the folder(s) are now correct (0 photos missing, 0 new photos to add).

    This has been where Adobe asked people to post bugs but with the demise of the online photo hosting photoshop.com website that shares the same domain name, new user creating may not be working, but you can try:
    http://feedback.photoshop.com/photoshop_family
    Issue 2) is something I’ve seen—the erroneous Missing Photos indication even though I was working on the photos, and exporting them and printing them just fine, without ever having created a smart preview.  I’m glad I read this because I might not have thought about doing a synchronization and having LR5 removing and re-adding the photos, wiping out my edit history.   I can say that the photos I saw as missing, before, are now properly indicated as online so it may be a temporary condition that can be remedied by restarting LR or restarting the computer, though I’ve not really investigated carefully, since it only happened once.

  • SRM-MDM Catalog - issue in the Portal (Employee Self-Services - Shopping C)

    Dear SAP,
    When we quit a web page in SRM-JAVA system, we get this issue in our production system.
    We do not have this issue to our DEV and QAS system :
    ============================================================
    Exception occured during processing of Web Dynpro application
    sap.com/tcmdmsrmcat~uisearch/MDM_SRM_UI_App. The causing exception is
    nested.
    [EXCEPTION]
    com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Exit-Plug
    must no be triggered with an URL when running in portal. Use portal
    navigation instead to navigate to another application !
    ============================================================
    There is a different behavior between our QAS system (working) and the
    productive system (not working):
    On calling the MDM-Catalog, a short URL is called to open the catalog.
    On returning the shopping cart back to SRM, there is in QAS system the
    same short URL, but in PROD system there is an URL (instead of a short URL):
    1. Test System QAS --> Only one URL (In / Out) : IT WORKS
    =====================================
    http://serv2qas.luc.local:50000/irj/portal?navigationtarget=navurl%3a%2f%2fd49ceba342f141e3c16bebca2f501417&dropprtevent=obnevent&botechnicalname=sc&bosystemalias=sap_srm&operation=shop&isobn=true&applid=sapsrm_e_checkstatus&powl_query=e00db2f1dad54ff19363000c29462e23&dynamicparameter=applid%3dsapsrm_e_checkstatus%26powl_query%3de00db2f1dad54ff19363000c29462e23&currentwindowid=wid1296120969986&navmode=3
    2. Productive system PROD --> Incoming URL (from SRM to MDM) : IT DOES NOT WORK
    ====================================================
    http://www.supershop.com/irj/portal?navigationtarget=navurl%3a%2f%2fd49ceba342f141e3c16bebca2f501417&dropprtevent=obnevent&botechnicalname=sc&bosystemalias=sap_srm&operation=shop&isobn=true&applid=sapsrm_e_checkstatus&powl_query=e017f129ba0d47f1aa61000c290bb402&dynamicparameter=applid%3dsapsrm_e_checkstatus%26powl_query%3de017f129ba0d47f1aa61000c290bb402&currentwindowid=wid1296111549383&navmode=3
    URL after SC creation (coming out from Catalog) :
    http://www.supershop.com/irj/portal?navigationtarget=pcd:portal_content/every_user/SuperShop_Desktop/Roles/com.sap.pct.srm.core.supershop_ro_employeeselfservice/fl_goshopping/com.sap.pct.srm.core.iv_shop&NavMode=3&UsePost=True&SAPSRM_RESUME_ID=SAPSRM_OCI
    Could you please help me to find out what is the difference between QAS and PRD if system is coming from ?
    Best regards,
    SAP Admin
    Edited by: SAPNetWeavAdmin on Jan 27, 2011 10:34 PM

    Dear all,
    It was a role problem.
    Best regards
    SAP NetWeaver Admin

  • SRM and MDM Catalog issues

    Hi
    We are experiencing an unique problem.
    We have SRM 4.0 with MDM 1.0 as Catalog?
    One of the issues that we are facing is price for items in held shopping carts. changes whenever MDM Catalog is refreshed.
    We refresh our MDM catalogs twice a week.
    So when a user who has a held shopping cart changes the shopping cart
    the price of existing items in the cart changes.
    All help/advice on this issue is appreciated.
    Thanks,
    Nikhil

    hi Jorge,
    Can you elaborate on response?
    How do i check the if in BBP_WS_ENTITY_V update view the field OCI_VALIDATE in the record corresponding to your catalog has the value?
    Note the price of the item in catalog is same ....but for some reason the one in held shopping cart changes after the catalog is refreshed.
    Thanks,
    Nikhil

  • Catalog issue with direct PO

    Hi,
    I am facing an issue with creation of "direct PO" in SRM from catalog / punch out. In extended classic scenario, we can create POs directly in "Process Purchase order" transaction which would get transfered to SAP with document type ECDP.
    While adding items from a catalog or punch out, the items selected in the catalog are getting transfered to PO. BUt the vendor number is not getting transfered. Vendor field in basic data tab remains blank after the item got transfered. If we add items to a shopping cart, then there are no issues as we could see vendor number in shopping cart. Hope it is not as issue with OCI, as problem occurs only while creating adding items from catalog to a direct PO.
    Also, while adding items to direct PO, we are getting a pop-up message "Your user data was not found: inform your system administrator" after the items are getting transfered to PO screen.
    Could you please help me to fix the above two issues?
    Thanks,
    Arun

    Hi,
    Can any one please help me in this issue?
    Thanks,
    Arun

  • Punchout catalog issue

    I have several punchout catalogs working fine, except for one that I cannot connect the supplier's website. The set up is the same as with other punchout catalogs that I have. The error I get with this one is that access is denied. The supplier assures me I don't need a password to log in, but they say I have to have the XML set up correctly in order for authentication to occur at their site.
    I don't know what that means. What role does XML play in OCI interface? Can anyone help me with this issue?
    Thanks,
    SN

    Hi,
    XML has nothing to do with the call to the catalog, so if your supplier says that XML has to be setup correctly I doubt they have an OCI compliant catalog, more likely it will be a cXML one.
    OCI uses only a HTTP GET or POST to call the supplier catalog.
    Only the return message from the catalog to SRM you can choose between either a HTTP form or an XML variant.
    One other thing you might want to look at is if the supplier site uses a secure http connection (https://<url_to_catalog>) in which case you might need to add a certificate to your SRM server.
    Regards,
    Robin

  • Organizer 8 Catalog issue no pic files shown

    I have been haveing this issue for a while and can't figure it out.  Let me start by saying I have reinstalled Photoshop and Premiere, tried renaming the psa to psa.old, deleted and created new catalogs and still no help.  Now, on to the issue.  In my catalog it shows all of the folders and sub-folders I have on my HHD with photos and videos.  The video clips show up, no problem. Although, they don't show thumbnails just the filmstrip icon, but thats anouther issue I can live with.  The photo folders have no content in them.  I know they are there because I can get to them outside of the 'Organizer'.  When I run get media from files or folders, it runs, but then tells me that nothing was added because they already exist.  Wrong, thank you for playing.  Nothing still shows up in the 'Organizer' but the folders and sub-folders.  Any Ideas?????  I am trying to like this program, but it is getting quite difficult.  Please help, somebody please!

    See if this helps
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Some_photos_are

  • PSE9 Catalog Issue

    I am having issues with my catalog.
    I have run optimize/repair to no avail.
    I take a lot of sports pictures for our local high school.
    The procedure I do is as follows:
    I manually import my pictures from my camera card into a folder outside of PSE9
    I then created a subfolder under that folder and rename my pictures use PSE9 editor.
    I then edit my pictures in organizer
    I was half-way through my editing and realize that not all of my pictures were available in the organizer.
    What is interesting it will not import all my pictures from the subfolder which has the renamed pictures created by PSE9.  When I try to import them it says pictures are already in catalog?  I cannot see the pictures and I have view all turned on.  Any suggestions?
    I am not too sure what is going on, but this is becoming quite frustrating.
    By the way, is there a way to limit the number of folders that show up in the catalog as I do not need my documents folders in the catalog?
    Any other suggestions.

    When re-naming make sure not to duplicate previous file names.

  • Application Catalog Issues SCCM 2012 R2

    Hi,
    I am trying to get the Application Catalog working. 
    Quick first question. Is there anyway to force the link in Software Centre to open IE rather than the default browser which is Chrome in my case? I suspect not but asking anyway.
    My main issue however is the Certificates. Using a standard Certificate with only the FQDN as the DNS entry for the Alternative Name works. The issue with that however is as the site loads using the Netbios name I get a certificate error.
    I have tried setting the website through Client Settings to use the FQDN however when I then try to load the site I get the 401 - Unauthorised Access message.
    I have tried creating a new certificate with both the FQDN and Netbios name listed as DNS entries (This may be wrong as certificates are not my area) and setting the Client settings back to auto detect. This works so much as the site loads but says: "the
    website cannot communicate with the server" in the main section of the screen but still has the Application Catalog theme.
    I have tried a few things with different combos but I cant figure out what I am doing as IIS isn't my area either. Not sure why adding in the FWDN to the URL suddenly completely breaks the website with 401 message or why having a certificate with the Netbios
    as well as the FWDN on the cert breaks communication.
    Any help would be great. I have made no changes to the default settings other than what is listed above.
    Cheers,
    Zac Avramides

    Like all things SCCM it appears this was a time issue. Still unsure as to why having the FQDN over the Netbias names creates 401 errors though. Would be nice to know why. Needed to allow around an hour after the certificate update on IIS in order for the
    change to work. Simply added the both the FQDN and Netbios names as Common Names and DNS Entries.
    Would still like to know if it is possible to direct Software Centre to IE rather than Chrome as Chrome will always have the error.
    Zac Avramides

  • RMAN Cataloging issue

    Hi Guys
    I am trying to restore a QA database from the backups in our standby database. I am using an NFS mount to access the backup from the QA machine.
    When I catalog the backups they are all found and added to the QA catalog. When I list the summary the backups are returned out of order. When I list the full backup (Incremental level 0) I am interested in there are datafiles that are not listed. I have listed the backup in the standby database and the datafiles are all shown as being present.
    I have copied the full backup files to our QA machine and cataloged them on a local disk to try and remove NFS mounts from the equation and get the same issue, although the datafiles that are shown as missing are different to those that were missing previously.
    I have also tried cataloging in our development environment and have the same issue, however the datafiles that are missing are different to those in our QA environment.
    Does anyone have any thoughts on this one?
    For your info we are using 10g on Redhat EL5, running on VMWare.

    Yep, the mount point is correct - the backups are found by the catalog command, they just are not including the datafiles correctly.
    Something that I have noticed is that in our Standby Database the datafiles are listed as Incremental Level 0 whereas in QA they are listed as Full. I am wondering if it is the fact that we are doing an Incremental Level 0 instead of an explicit Full that is causing ths issue.

  • Lightroom 5 catalog issue. please help

    hallo everybody,
    I really need some help. When i open Lightroom 5, it gets confused and the catalog is not complete anymore. Half of them are missing.It shows the pictures on my SD card,which I always format.In other backups it's the same thing. So, I had to reimport all pictures which did month's ago and now the same AGAIN That can't be....
    please help.
    thanks to everyone that replies.

    Are you speaking about Lightroom? By "main page", do you mean the Library Module with "All Photographs" selected?
    If so, right-click on any photo and select Go To Folder in Library and it will highlight the folder  containing this photo in the left-hand side Folder Panel.

  • Photoshop Elements 6.0 Restore catalog issue

    Okay...I am a novice here...but I have been using Elements since 3.0.  I had my computer setup to backup my catalog in incremental steps to an external hard drive.  I just reformatted my computer (Vista...UGH!)  and now when I restore the catalog per adobe instructions...I don't get all my tags back.  Now here is where I screwed up (I think):  I Had a couple catalogs saved and I can't remember which one I used for the backup.  I think I uploaded the wrong one, now it won't let me overwrite that one!  Also when I finish a restore catalog session, it leaves up the screen that shows the catalog location and when I "x" out of it or cancel out it gives me a "cancel restore session" message.  I am frustrated...Does Adobe provide techs at a cost to come out?  Or can anyone help here?  8 years of tagging photos...I can't give up now!  Thanks

    Okay, well I get the catalog to "restore"...but when it is apparently done, it leaves up the window that is "locate next backup items to restore".  If I just "X" out of it or hit "cancel" then elements asks me "are you sure you want to cancel the restore?".  I have no other options but to "x" out of it or cancel.  so I think I'm not getting my complete restore...what do you think?

  • PSA 2.0 to PSA SE 3.0 Catalog Issues

    I edit my images in PS CS but I paid for Photoshop Album 2.0. because I really liked its tagging facilities and calendar organizing. So I spent a lot of time tagging.
    Now PSA 3.0 SE is out and I installed it but after install I noticed it didn't have my old tags. This might be caused by my moving the PSA 2.0 to my G drive to improve drive contention and to make it more noticeable for backups (I believe it was buried in the "Program Files/Adobe/Album" area or something like that...hard to even know you should go there for backups).
    So a couple questions:
    1) Is this tagging and calendaring stuff available in Elements or Photoshop? In others words is going to PSA SE 3.0 the right upgrade path?
    2) How can I get the catalog into PSA SE 3.0? Are the 2.0 and 3.0 catalogs compatible so I can just replace the 3.0 catalog with 2.0? Or is there a hidden import function?
    Thanks for you help. I wish Adobe had at least carried the 2.0 features (including have the catalog location listed in preferences) rather than dumbing it down.
    Bob

    This is all very confused - bacause Adobe use complicated versioning.
    The last version of PSA was PSA 2.
    There is a giveaway version called PSA SE 3, which is mostly a subset of PSA 2.
    The replacement for PSA 2 was Photoshop Elements 3 [PSE 3 - its Organizer component], which added more functionality and works fine with CS.
    PSE 3 was then replaced by PSE 4 and PSE 4 by PSE 5.
    Forget PSA SE 3.

  • Lightroom 4 Catalog issues

    I am trying to open my copy of lightroom 4 but when I go to open it, it says that my catalog is already running in a different version of lightroom. But there is no other version of lightroom running. I tried uninstalling and reinstalling lightroom but that did not work. Please help!!

    Please quote the exact error message.
    Did you try re-booting your computer?
    Here's a guess: look for a .lock file in the same folder as your catalog and then remove (delete) the .lock file

  • Vendor punch-out catalog issue

    Hi,
    We are using SRM server 5.5 with CCM2.0 for classic scenario. We are facing problem while accessing vendor catalog. We have checked catalog call structure. It seems that it is fine with respect to other catalog configured earlier. The error is as follows:
    XML page can not be displayed
    Can not view XML input using style sheet. Please correct error and then click the Refresh button, or try again later
    The system can not locate the object specified. Error processing resource
    Please can anyone help me to get exact error and it's probable solution?
    Thanks in advance.
    Regards,
    Umesh

    Hi Masa,
    We have tried to call vendor's website thru browser directy but it giving the same error.
    Regards,
    Umesh

Maybe you are looking for