CATS Notifications If No Time recording for the day

Hi
I wan to trigger the Notification to employee If He is not recorded his work time for particular week.
Ex: EE worked on some tasks in particular project as per the target hours, But he forgot to fill the time shee at the end of the week. Now i want to send reminder mail notification to EE mail ID(or mail to UWL) to fill the time sheet. How to go with this requirement?!!!
Do I need work flow for this? Can i configure anything in the back end?
Pls can anyone give details on this how to fulfill this requirement?
We don not have time management in place,Its not yet implemented. Work Envr:ECC 6.0, CATS Regular
Thanks
Ram

Hi Ram,
I have found some documents.
Have a look at this. You would get an idea
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CATS/CATS.pdf
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d4/0c863be3047e19e10000000a114084/content.htm
http://www.sap-press.com/product.cfm?account=&product=H1906
http://web.mit.edu/sapr3/windocs/fomds21p.htm
https://www.ucflex.uc.edu/help/nav/project%20systems/course/project%20creation%20and%20management/file1520/index.htm
regards,
Brinda L

Similar Messages

When setting the split-days to "every 15 minutes," the week and comparison views show incorrect time ranges for the day

When I change the "split-days" interval time, under Options > Settings, to
15, or every 15 minutes, the week and comparison views don't show the correct
time range for the day.
<P>
For example, if I click View to display the calendar and then click Week to get
a weekly view, the time range displayed is from 6:00 a.m.
to 4:00 p.m. If I click Comparison to get a
comparison view, the time range displayed is from 12 p.m.
to 6:45 p.m.
<P>
In this example, should both of these views show the same time range, from
9:00 a.m. to 4:00 p.m.?
No, the two views will not necessarily show the same time range. The time
range for the comparison view will start at the beginning prefs time only
if you have something scheduled (on any day of the week) starting at that
time. For example, on one of the days during your week of comparison, if you
create an event that starts at 9:00 a.m. and then open the comparison view, the
time range displayed will start with 9:00 a.m.
<P>
Additionally, view times will expand past the configured settings if events
span past the time range. That is, if you have an event that spans from
5:00 p.m. to 8:00 p.m., the event will be reflected in the view, even though
your time range may be set to go only to 6:00 p.m.

Umm yes.
The settings are stored in ''prefs.js'', so you could swap various copies of this file in and out.
However, the system will load ''prefs.js'', then, if present, ''user.js'' , so you can set up just your changes in ''user.js'' .
The sort of line you need to look for is like this:
<code>user_pref("mail.server.server14.check_time", 10);</code>
You'll need to do some research to identify which of your accounts is which.
Search for the account's email address:
<code>user_pref("mail.identity.id10.useremail", "xenos@example.com");</code>
Use the id number to locate the account number:
<code>user_pref("mail.account.account29.identities", "id10");</code>
Use the account number to find the server number:
<code>user_pref("mail.account.account29.server", "server14");</code>
Finally, you can then use the server number find the account's time setting:
<code>user_pref("mail.server.server14.check_time", 10);</code>
This last entry may not exist, if you have never changed the setting from the default 10 minutes.
Do be careful with your typing and copy/pasting; if the file fails the syntax parser it will silently fail.
And make sure Thunderbird is shut down when you do the swap. If it's open, it may overwrite changes, and in any case, it only reads the settings file when it starts up.

Help with pulling records for the last 24 hours

Post Author: kbrinton
CA Forum: Formula
Hi,
I don't know what is wrong with me but I can not figure out how to get Crystal to pull records for the last 24 hours. I have a date field I can key off of but I can not figure out the formula or correct syntax to put in the Selection formula. Any help would be great!! Thanks

Post Author: SKodidine
CA Forum: Formula
No need to create any formula. In your record selection criteria type:
{table.date} in dateadd("h",-24,currentdatetime) to currentdatetime
If you just want the prior 24hrs and do not care about the time then replace 'currentdatetime' with 'currentdate'.
(currentdatetime - 24) will give you 24 days before and not 24 hours.

PT_QTA00 is generating repetative records for the same quota type

PT_QTA00 is generating repetative records for the same quota type and one more thing i have already maintained 10 days of quota in 2006 and when i run for the same employee its creating one more record with 10 days again how can we restrict it in configuration

As said earlier, you want to setup Time Constraints for It2006 which is in table: V_T582A
You should set the Time Constraint to 2.
HR master data uses the following three time constraints:
Time Constraint 1
For the entire time that the employee works at the enterprise, exactly one valid infotype record must exist. The validity periods of the individual records must not overlap. If a new record is created, the system automatically uses the start date of the new record as the delimitation date of the old record. Gaps are only allowed between the employeeu2019s entry date and the start date of the first record.
Time constraint 1 must be used for all of the infotypes containing information that must be available at all times. This is particularly true of personal and organizational assignment data.
If a record is delimited because of time constraint 1, the system displays an appropriate message.
Time Constraint 2
No more than one valid record can exist at any one time. Records with constraint 2 must not overlap. Their existence is not obligatory. If a new record is created, the system automatically delimits the previous record, if one exists.
If a record is delimited because of time constraint 2, the system displays an appropriate message.
Time Constraint 3
Any number of valid records can exist at any one time. The individual records do not conflict with each other.

Merging two records in a single record for the same matnr,werks and bwart.

Hi I have a requirement to merge two records into one single record using the quantity field from MSEG table.
I am selecting two records from the table MSEG. Now for these two records i have to add the quantity values into one variable.
Then there should be only one record for the same matnr,werks,bwart.
Any suggestion would be appreciated.
Regards,
Amit

hi,
You can COLLECT statement only if all non key fields are numeric.
This statement Adds all such fields and give us a single record.
Regards
Sumit Agarwal

BAPI/FM for creation of CONTACT RECORD for the contract account

Hi All,
I need to create a contact record for the a contract account.
The contact record details will be maintained in the table BCONT.
Let me know if there is a function module/BAPI/any othere way to create a contact record.
Regards
Shiva

Hi,
You can use the function module - BCONTACT_CREATE to create Contact record
(or)
make a BDC of the Tcode - BCT1(Contact creation) and use the same for creation of contacts in batch
Note: Contact is created against Business Partner and not Contract Account. So you will have to include your logic of finding out the respective Business Partner for the Contract Account for which you need to create Contact record.
regards
Gagan

I am backing up to my time capsule for the first time. It has been stuck on 348mb of 20.1 gb for days. Is this normal or is the machine not functioning correctly?

I am backing up to my time capsule for the first time. It has been stuck on 348mb of 20.1 gb for days. Is this normal or is the machine not functioning correctly?

That seems to be OK via WLAN!
It ist better to do the first backup via LAN-cable.

I recently moved my Aperture Library file to an external hard drive. Can I now create a vault to be saved on my Time Capsule for the Aperture library on this external hard drive?

I recently moved my Aperture Library file to an external hard drive. Can I now create a vault to be saved on my Time Capsule for the Aperture library on this external hard drive?

One thing to bear in mind, if you are using Time Machine on your Time Capsule and have it set so the TM backup includes your external drive, you will effectively be backing up your Aperture library twice on the same drive, once with Time Machine and once with the vault. This isn't a problem unless you start to run out of space.
Another thing to note, vaults on network drives used to be flaky (i.e. not really supported) and required workarounds to be able to use them. I'm not sure if this has changed, but I just managed to create a vault on my TC ok.

I'm setting up my Time Capsule for the first time and cannot get an internet connection throughWAN connection

I'm setting up my Time Capsule for the first time and can't get an internet connection via ethernet cord

So new AC model TC??
What modem is it? Pure cable modem .. did you power cycle the modem ( OFF for at least 30min..)??
This is essential to lose the old setup and start afresh.
How have you setup the TC?
Did you try just bridge to existing router? If it doesn't get an IP and you just bought it, possible it is faulty.
Lots more details.. really important things like did the ethernet connectivity leds go on.. both the TC port and the modem port - front ethernet indicator should light up..

Recording for the web P2

I do not believe there is a way but it would be nice if there was an option to record for the web on a P2 card. I am recording tech meetings (HVX200) and uploading them to the web, taking out the extra step of compressing it sounds like magic.......is this possible??

All you have to do is check the settings on the camera for the different formats it shoots... that's with any camera, but I can tell you with pretty good certainty HVX200 doesn't shoot to any compressed web-friendly formats.

Actual Time bar for the activity duration in Gantt Chart

Hi all,
The Actual time bar for the elapsed activity duration in Gantt chart is not appearing. The same is true for all the activities i.e. activities which are not yet confirmed and activities which are partially confirmed.
Is there any customizing for the same? ( I am getting the bar in IDES, but not in DEV/QAS/PRD )
Any Help in this regards will be highly appreciated
Warm regards,
Srinivas Potluri

Hai Srinivas
Got the solution.
1)For this first check in the project profile of the Hierarchry graphic -
Time scheduling profile - check the colour patterns which been assigned.
2)open the project - Cj20N - go to planning board - bar chart - under settings - Planning board assistant - Gantt chart - check the dates display for Project definition , WBS , Acitivity - try to change the colour and check.
while changing can see - basic date of the acitivity. based on the confirmation can see the bar confirmed activity with respect to basic date. the bar confirmation will show withrespect to duration.
3) If the bar chart need in daily /hourly - can check in CNE5 . click on the graphics -bar chart - which u will get the bar chart - in this choose the Time Axis - where can select the monthly /weekly/daily /hourly format .
Award points if clear and got the solution.
Regards
PP

I keep getting a message pop up the first time I open Photoshop CC for the day, "we sorry, we can't connect to adobe server at this time...I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can

I keep getting a message pop up the first time I open Photoshop CC for the day, "we sorry, we can't connect to adobe server at this time...I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can be done?

Moving this discussion to the Creative Cloud Download & Install forum.
R.O.B. please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve the connection error between the computer and our activation server.

Display all calendar events for the day in notification centre

Hi there apple community,
I was hoping someone could point me in the right direction. I can only see a couple events in notification centre. I was hoping there is a way to show all the events for the day in notification centre.
Thank you for any help you can give me!

I want my events and birthdays there... please help me...
Thanks

Want to display records for the specified month only

Hi all,
In my report I am displaying records for the specified month only.
I am able to display it in range of the dates, but i want to display name of the month at the top of page.
e.g.
i am giving range like
01.04.2008 to 30.04.2008
then, it shoud display April, 2008.
Thanks & Regards,
Sandip Sonar

Hi,
Ru using alv grid?
Use following FM to get month in words.
and then using TOP-OF-Page event print the month.
DATA X_MONTH(11).
CALL FUNCTION 'CONVERSION_EXIT_LDATE_OUTPUT'
     EXPORTING
       INPUT         = SY-DATUM
     IMPORTING
       OUTPUT        = X_MONTH.
Regards,
Dhan

How to extend the time line for the premiere on mac pro mavericks

how to extend the time line for the premiere on mac pro mavericks

Wrong place.
Try the Adobe Premiere forum.
http://forums.adobe.com/community/premiere
Good luck,
x

CATS Notifications If No Time recording for the day

Similar Messages

Maybe you are looking for