CDMC UCIA : Information on knowledge base scenario

Hi all,
I want to use the scenario CDMC UCIA with knowledge base.
In note "Note 1321095 - CDMC UCIA : Information on knowledge base scenario" it says that I need:
"extract the list into the    excel file and send the to service provider or partner that    creates the knowledge base content to get the complete object    details of the particular objects."
What exactly I need to send to service provider?
Can I do it myself and not use a service provider?
I only did it with a reference system. is anyone has experience with knowledge base scenario? is it the same?
Best regards,
Lior Grinberg

Hello Lior,
You can do by yourself, but you have to install a sap system with the same version of the target system of the upgrade.
According to the SAP Note 1321095 you have to:
Log on to knowledgebase system.
- Start the transaction: CNVCDMC_EXTRACT_KB.
(Execution time: approximately 4 hours, might vary depending
on the number of customer objects).
- Make sure to follow the below steps to change the format of the
Excel file received via- email before uploading it, using the
transaction CNVCDMC_EXTRACT_KB.
- Open a new Excel file by going to Windows -> Start.
- Now go to the Menu bar -> File -> Open and open the Excel file
that you have received via- email from the customer.
- Now you can see the 'Text Import Wizard' popup on the screen.
Change the parameter 'Start import at row' in the popup to 6
and click on the 'Finish button' and finally save this
document.
- Upload the excel file obtained by following the above steps and
fill the Knowledgebase name and the end release
Best Regards,
Jader Coelho.

Similar Messages

  • Update Knowledge base on Production with Dev Server

    Hi Friends,
    I have a knowledge base on my dev server and we imported same knowledge base to Prod server.
    So here my questions is, we have created some rules in the dev knowledge base so we need to replicate same rules to prod  knowledge base? how to overwrite prod knowledge base with Dev knowledge?
    Can anyone guide me how to do that please?
    Thanks,
    RK

    Hi Samir,
    Stopping the e-mails to be sent out shouldn't be a problem in this system I think. You can still test everything, without the business getting confused. If you want to see if an e-mail is correct you can still check it in transaction SOST without it being sent.
    Otherwise inform the business about e-mails sent form different systems and add the system name in the e-mail message so they know from which system the e-mail is comming and if they have to respond.
    Regards,
    Martin

  • Repair Disk Permissions utility stalled - I have read the knowledge base

    I have researched the knowledge base and search for posts on this and cannot find answer: Running 10.4 at the latest version. used the original install 1 disc I received with Tiger to repair disc permissions (like Apple support has told me to do in the past, but my current research said I do not need to do this unless certain parameters are met, and none of the parameters applied, but oh well, I am here anyway). Cold Boot from the original install disc 1 and slected the start up disk I use (I only have one start up disc/drive). Did a repair disc permissions and got a long running routine that reporting a lot of fixes, then the utility has stalled -- no progress on the progress bar. I "stopped" the process using the "stop repair" button (three times). The log reflected the utility stopped, but the progress bar still is blue and not moving (for a couple of hours). When I go to quity File >Disk Utility, it warns me that Disk Utility is running and this may make my system unstable/unsuable.
    QUESTION: CAN I JUST QUIT DISK UTILITY AND NOT HAVE ANY ADVERSE AFFECT ON MY IMAC DRIVE?

    Thanks for your advice, I still have an issue:
    -after the first repair disk permission "stalled" process, I exited Disk Utility and cold booted the machine after I had disconnected all external devices other than the original iMac keyboard
    -obtained the combo patch for 10.4.7 from the Apple download site (it had already been installed but I reinstalled per your advice)
    -re-applied the combo patch and then did another cold boot
    -ran Disk Utility from the original Tiger install #1 disk, and then selected "repair disk permissions" for my start up disk (I only have one)
    - process ran for 10 minutes or so then gave the following error message: "Disk Utility Error: Disk Utility has lost its connection with disk utility management tool and cannot continue. Please quit disk utility and re-launch disk utility"
    - I pushed the "stop disk permission repair" button, then quit disk utility, then cold booted the machine again.
    -re-applied combo patch as above, then cold booted the machine
    -ran disk utility from the original iMac install #1 disk, ran "repair disk permissions", and then received the same error message as above.
    - I then just quit Disk Utility and cold booted the machine again and went about my business. There does not seem to be any problem with the machine (was not before, but I ran repair permissions thinkging this was a routine maintenance taks that should be run)
    - in my prior search of the knowledge base, I found the following information about repair disk permissions:
    Location: http://discussions.apple.com/thread.jspa?messageID=607495&#607495
    How often should I Repair Permissions?
    You do not need to Repair Permissions on a regular basis.
    There are only three occasions you need to do this:
    1. When you have just installed something that required you to run an Installer, rather than just copying some software to a folder. This should be done for both Apple and non-Apple software.
    2. When you have been working on your OS X files or folders while booted from OS 9, or remotely connected via a non-OS X machine, since OS 9 and other systems do not handle OS X's permissions correctly.
    3. The other case is if your system is behaving strangely, when you should run Disk Repair from your CD followed by Repair Permissions. This is just to eliminate these things before going on to further trouble-shooting.
    Otherwise you can happily forget about Permissions!"
    So, it would appear I do not need to do anything else; the machine seems to be working properly. Is there anything else I need to do? thanks for the help! Bob

  • Three days ago I replaced an earlier Adobe Flash with version 10.1.85.3. This has not appeared in the list in Tools/Addons/Plugins to permit me to enable it in Firefox, and I can't find the answer in the knowledge base.

    Re. installing/enabling a Flash plugin
    1 I'm running Firefox version 3.6.10 on Windows XP SP3.
    2 Three days ago Secunia PSI informed me the installed version of Flash was a security threat so I uninstalled it then installed the latest version 10.1.85.3 . It appears in the Control Panel add and remove programs listings.
    3 As of 2 days ago BBC iplayer keeps telling me I need to install (latest version of?) Flash.
    4 I don't have this problem using my fallback Internet Explorer.
    5 Assuming I needed to enable Flash in Firefox I went to Tools/Addons/Plugins but Flash is not listed there.
    6 Firefox Support/Knowledge base/Installing the Flash plugin doesn't help - in step 2 I don't see the yellow 'Additional plugins are required...' bar when I go to the Adobe test page, but then why should I, it's already installed.
    6 What's going on - please help!

    I have the same problem as luiszamarreno. I tried using the following to update:
    sudo apt-get --purge remove adobe-flashplugin flashplugin-nonfree; sudo apt-get --purge autoremove; sudo apt-get clean; sudo apt-get upgrade; sudo apt-get --purge autoremove; sudo apt-get install flashplugin-nonfree
    Now I have the "flashplugin-nonfree" v. 10.01.218+really9.0.283.0ubuntu1 and it still doesn't work for the Facebook plugin. I get the notice it has crashed and needs to be updated. I also get a notice to update on the plugins page under tools --> addons. When I try that, it goes to the Adobe Web site, which I have seen on Ubuntu support sites that I do not want to upgrade from there.
    Does anybody have an answer to this?

  • Error in accessing Knowledge base  + oracle text 11g

    Hi All,
    I am using oracle text 11g.
    I had installed a knowledge base and it was working fine(bcos i was able to generate themes and gists), i wanted to load a 'default' thesaurus, i created a 'default' thesaurus and from cmd prompt i gave 'ctxload' command, then it asked for user(i logged in as ctxsys credentials), name (thes default),file( thes path), but after this i got below error
    connecting...
    DRG-11510: encountered unrecoverable error on line1
    ORA-00931: missing identifier
    disconnected
    unknowingly after this i gave 'ctxkbtc' command and proceeded further and i cancelled this action by closing cmd prompt.
    after this, now i am not able to create themes or gists, i am getting the below error while creating themes.
    Error report:
    ORA-20000: Oracle Text error:
    DRG-11422: linguistic initialization failed
    DRG-00100: internal error, arguments : [52100],[drxa.c],[357],[gxtopen],[1]
    DRG-00100: internal error, arguments : [52100],[gxt.c],[186],[gxl err],[7]
    DRG-11432: file error while accessing knowledge base
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.CTX_DOC", line 210
    ORA-06512: at line 2
    20000. 00000 - "%s"
    *Cause:    The stored procedure 'raise_application_error'
    was called which causes this error to be generated.
    *Action:   Correct the problem as described in the error message or contact
    the application administrator or DBA for more information.
    please let me know the solution
    Thanks in advance.

    Hi,
    You can try running ctxkbtc once more with revert option.
    -revert
    Reverts the extended knowledge base to the default knowledge base provided by
    Oracle Text.
    Make sure to set NLS_LANG variable before running it
    If you have already solved this issue, if possible share the solution to this forum too.

  • How to use Knowledge Base template interactively?

    I'm using RH11, and my management wants a Knowledge Base that allows our clients to add to it.  When I opened the Knowledge Base template, I didn't see much that was different from a regular help file.  The RH11 manual mentions this template twice with no instructions.
    Where can I find more information on how to use the Knowledge Base template as a wiki, as promised in the manual?
    Thank you!

    Okay, I found it in the help. FWIW, it's also mentioned when creating a new project.
    What this is referring to is that the project template will create and offer a page that never needs maintaining. The page is labeled "What's New", and describes a method of using See Also keywords to manage new and changed topics. If this method were not used, a "What's New" page would require creating links or specifically adding verbiage about each new topic.
    It DOES NOT allow creating one or more pages that users may contribute to.
    RoboHelp has never been an application that allows that type of collaboration. That's what Wiki software is for.
    Cheers... Rick

  • Using RH to create Knowledge Base

    We are revamping the support area of our product website and we want to add a searchable knowledge base.
    As most of the information users want is already present in the help system, I'm considering expanding and slightly reorganising the help system and using that as the knowledge base rather than creating a new database with duplicate information.
    We would create a new entry point and have a number of FAQs and links that go directly to the relevant part of the help.
    Has anyone done this using RH and/or does anyone have any thoughts on this idea?
    And is it possible to search a compiled webhelp RH project from an external search box?
    Thanks

    Hi there
    As for the question of whether it's possible to search a compiled webhelp RH project from an external search box, I'm going to crawl out here on a limb and say it should be. After all, WebHelp (making an assumption here that you are using WebHelp) is nothing more than a collection of HTML pages all packaged together with a frameset and fancy coding that allows it to work as a unit. So if the search can crawl through typical web pages, it should be able to manage that.
    Cheers... Rick

  • Error message KB19454 in the BlackBerry Desktop Manager Knowledge Base.

    Please somebody help me!! I have been trying for the past 3 hours to sync my address book with my mac. All I want to do is save my contact information so I can then sync them with my new apple iPhone 4 as I am getting rid of this annoying blackberry curve!!
    My calendar sync worked without problem but I am going crazy with this error message.
    Please someone help me!!!

    Hi and Welcome to the Forums!
    For your first issue, I cannot tell if you've yet worked through the referenced KB...if not, you can find it here.
    For your second issue, I'm unsure...but perhaps this will help:
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Best!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • What happened to these knowledge base articles?

    I work in the Information Technology infrastructure department of a medium-sized media company.  My employer still makes heavy use of Adobe Creative Suite 2, despite its age.  This is due to both compatibility and cost factors associated with upgrading all of our designers to new Macs with CS5.
    Frequently, our Adobe CSx users complain about being unable to modify server-side files in Photoshop because it reports that the files are locked.  The specific error they receive is "Could not complete the request because the file is locked".  In the past, I found the following Adobe Knowledge Base articles for the varoius releases of Photoshop:
    7.x - CS:  http://kb2.adobe.com/cps/322/322291.html
    CS2:  http://kb2.adobe.com/cps/332/332534.html
    CS4 - CS5:  http://kb2.adobe.com/cps/406/kb406794.html
    All three articles were nearly identical to one another, with the only real difference being in the "products affected" section.  If you follow those URLs, you will find that only the last one for CS4 and CS5 is working.  We found that pointing users complaining of the file locked error in Photoshop was a massive help to our case that users should copy the files locally, modify them, then copy them back to the server.  Once they saw the words from the horse's mouth, they stopped bugging us about the problem or accusing us of not knowing what we were doing.
    Just today I had another CS2 user complain about this problem in Photoshop.  I went to give him the above URL for CS2, but decided to click the link first.  I found that it gave me a HTTP 404 "page not found" error.  I found the same thing with the 7.x - CS article.  As I said previously, we rely heavily on these knowledge base articles for backup on the information we were giving to the users on this issue.  We did not keep a PDF copy of the KB articles.
    I understand that the versions 7.x - CS2 are old, but I have located other CS2 knowledge base articles that are still up.  I have also discovered a Japanese language version of the CS2 article I am looking for that is still published (http://kb2.adobe.com/jp/cps/231/231270.html).  Does anyone know where I might find the missing KB articles?  Would it be possible for me to contact Adobe directly?  We do not have an active support agreement.
    Scott W. Sander

    Many of our users are not sophisticated enough to try to search vendor knowledge bases for solutions to their problems.  It seems almost everyone submits helpdesk tickets to us for every problem they experience.  We have previously explained that the problem is inherent in the product, but it was not until we supplied the actual knowledge base articles from Adobe that it quited the users down.  They simply did not believe us and assumed we were incompetent because we were not able to solve the problem for them.
    As for the CS4/CS5 link, thank you.  You are correct.  I had pasted them in from an old e-mail but the formatting was screwed up so I retyped them all manually and seem to have made a typo.
    The suggestion about keeping the KB articles offline now is a good one.  I thought of that already and did previously save a copy of the CS4/CS5 article as a PDF before I created this thread.  The suggestion of modifying the HTML of the CS4/CS5 article to include the other versions is also good one, and I will probably do that.  But I still wish I could somehow access the real KB articles.  As I said in my first post, we found that users hearing it from the horse's mouth was really the only way to get them to believe us in most cases.  Of course, maybe they won't know the difference with this custom PDF.  It just seems a bit dishonest and there is a small risk of being caught.
    I don't understand why Adobe would remove the articles for 7.x - CS2, even if they are old and not officially supported anymore.  Heck, CS2 was released in 2005 and there are Pagemaker articles still published and the last version of that was released in 2001.  What is laughable is that there is a link on the error pages to report a broken link, but if you click that all it does is take you to the normal support portal where there is no place to report broken links.
    In any case, I will create the custom PDF but if anyone has an archived copy of the missing KB articles or knows how I might be able to get them from Adobe, please let me know.  Thank you.

  • Can UCE communicate to the Universal Knowledge Base and Universal Software

    Question
    Can UCE communicate to the Universal Knowledge Base and Universal Software Component Repository through a company proxy server?
    Answer
    During the install process of the OnStage Management Server, the OnStage EZ-installer will detect your local proxy server whilst establishing communications with the Aduva Universal Servers.
    In this instance, the user is prompted for the proxy parameters, including IP address of the proxy or proxy server name if DNS is present, proxy user name and password.
    This information is stored locally in the .director.rc file and is never communicated to Aduva or any other 3rd party.
    Once the proxy settings have been correctly inputed during installation, OnStage will indeed work through the proxy server.

    Welcome to Apple Discussions.
    I assume you have already tried what has been said in this: iPod shows up in Windows Explorer but not in iTunes, iPod Service Error or Please reinstall iTunes and Fast User Switching in Windows XP is not supported?
    Sorry if you have, but have to know first.

  • Recording of WCI Knowledge Base + "Support Community" Discussions Webinar

    Hello,
    Thanks to all who participated in this valuable webinar. The recording is available via the links toward the bottom of this posting.
    Topic: WCI Knowledge Base and Community Discussions Webinar
    Date: Tuesday, September 28, 2010
    Agenda -
    - The Knowledge Base on My Oracle Support
    New WCI Product Master Notes
    New Video Demonstrations of Logging Spy and Wireshark
    Insight into the New Knowledge Management Process
    - The WCI Community
    New Discussion Forum for Customers
    - How do these support options fit into the Service Request Process?: KB->Community->SR
    Stream the video here: Knowledge Webinar
    Download the video here: Knowledge Webinar Download

    Hi,
    Good question. No, we will not move the content of the OTN forum to the Support Community Forum is the short answer.
    Just to be clear, the OTN forum for WCI will remain in place and is not being replaced by the Support Community Forum. The Support Community Forum is a supplemental forum which you are welcome to use as you desire.
    The main difference between the two forums is that the Support Community Forum is discretely monitored by the Technical Support team for WCI. We are the owners and the monitors of the Support Community Forum and we have set up monitoring tasks to ensure that posted questions are acknowledged and responded to by support as soon as possible. Conversely, while we occasionally participate in discussions on the OTN forum, that participation is much more informal.
    Steve

  • Since cahnging FIOS Internet provider, which required a router to go in front of "AirPort" I have a blinking yellow on the AirPort and suggested editing in AirPort utility to cahnge from Double NAT to "Bridge Mode" my knowledge base is not clear as t

    How do I clean up my new FIOS connection? I just cahnged ISP Fios and they reqquired a router of thier own in front of my AirPort Extreme. Since then I have blinking yellow light on the AirPort and AirPort utility keeps promting for an edit. Suggests canging from NAT to "Bridge mode". Obviuosly U have some internet or this post would not go anywhere, my knowledge base is not enought to feel comfortable with changing the settings. Correctly editing can be tricky, so how do I make necessary changes?

    How do I clean up my new FIOS connection?
    The FIOS router needs to be in Bridge Mode to prevent the Double NAT error from occurring when two routers are both fighting with each other for control of the network.
    Unfortunately, the likely problem from the FIOS side is that FIOS support will either tell you that their router cannot be configured to operate in Bridge Mode, or if it can, they will not tell you how to do it.
    But, it could not hurt to check with FIOS to see if anything might have changed recently in this regard, so your first call would be to FIOS support.
    If you cannot change the FIOS router to Bridge Mode, the alternate plan would be to change the AirPort Extreme to Bridge Mode. If you are using the Guest Network feature on the AirPort Extreme at this time, that feature will not work correctly when the AirPort is set up in Bridge Mode.

  • I have the problem described in /forums/knowledge-base-articles/704725. (Firefox is already running but not responding). My only solution is to use Task Manager to end the firerfox process. I am the only user and there are no other profiles on my system

    Occasionally I have the problem discussed in /forums/knowledge-base-articles/704725 , Firefox is already running. My only fix is to use Task Manager to end the firefox process. At such tmes, I have no other instances running.

    '''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s'''.<BR>
    This is not a cure but will make it easier if Firefox locks up.

  • Problem in creating a new knowledge base file

    Dear experts,
    I should like to create a new knowledge base file. I use the Oracle version 9.2 and the OS is Windows 2000. I have created the thesaurus with
    ctxload -user ctxsys/ctxsys -thes -thescase y -name DEFAULT -file xx.xx
    and the language setting:
    NLS_LANG=HUNGARIAN_HUNGARY.EE8MSWIN1250
    During the compile operation
    ctxkbtc -user ctxsys/ctxsys -name DEFAULT
    i get the following error message:
    DRG-52110: Error in writing extended knowledge base
    DRG-11101: drelcHU.dat open error
    Before the ctxkbtc command execution, I have created an empty directory for the expected .dat file:
    ctx/data/hulx
    with full control for every OS users.
    What is missing or false in the commands? Where could I learn more on this special topic?
    Many thanks for any help.
    Best regards
    Laszlo

    meanwhile i have found the solution :-), The name of the empty directory must be
    xxlx
    and not
    hulx
    Laszlo

  • Error 6 even after installing the software from Knowledge Base

    I am sure this has been on here before but I cannot find it.
    I am building a wedding video, one main menu, two sub menus with 7 chapters each.
    Check project reveals all set to go.
    tried to use the software recommended in the knowledge base but my system already has the latest version installed.
    SItuation-
    Burning Mpeg 2 BluRay Max quality
    All assets include two timelines (Trancscoded at Max quality), 3 menus, one sound track for menu.
    Using Dell 690 Workstation
    Duel Xeon Quadcore 5455's
    Loaded 16 gigs of Ram but using three since XP32 SP3
    Sony Blu-ray burner (other burner disabled)
    7TB's of Hard drive attached to system. 5 on board Drives and 4TB through Esata. System drive 10000RPM WD Rap.
    have Avid Media composer on this System too (If those drivers could be of issue and Sonic Scenarist (This project does not need that power)).
    Also Several conversion apps Sorrenson, TMPGEnc, Procoder, AVS Video converter. (Driver issues interfering?).
    Never produced a wedding video as my line is Football but did a 5 camera HD shoot (also shot some Super 8 footage upconverted to HD) for nephew as a wedding present. Sending him a Blu-
    Ray Samsung player with the video this week if I can get it on the Disc.
    Could start over with Sonic DVDit HD or Scenarist but spent last night building this encore job.
    ERROR 6 I could use a little help on this one please.

    Thank you.
    I actually spoke to an employee at Park Av (Adobe headquarters) in San Jose this morning through a friend in the industry who added her on (There is someone there all the time he said).
    The simple fix according to her is just the cause that was in your link, it comes from transferring assets in and out. I had done that and the replacement cued up the error 6. There are other error 6's generated but that was the first question she asked.
    Anyway I really appreciate the response.
    Actually writing the disc now with just a few gigs to go on the Test Copy.

Maybe you are looking for