Cfchart: clips or crops my series marker at the top of the graph

I am plotting a line chart. (aka Frame chart)
My series markers are begin clipped or cropped when the value is the maximum. I have data from 0.0 to 10.0. When the value is 10, it does not show the complete marker. I really don't want to have to set the scale to 11. (make no sense as the values can never be greater than 10.0 and looks really bad)
Is there a setting in the xml style that I am missing or is there a setting on the server that will increase the plot area so this does not happen? I am using both the built in markers and custom markers but it makes no difference. Both get cut-off.
Example: Yellow arrows added for emphasis. See how the markers are clipped/cropped.

Kinda a what the ...
Although the chart is only a 2d flat line chart, change this to a 3d chart with a Zero rotation. Do this in the .xml style file either created by hand or using "webcharts.bat" to launch the chart editor and create the file. Do both items below
Remove is3D="false" (or set to true i.e. is3D="true") as part of the "frameChart" tag. This is usual the second line of the xml file.
and add xDepth="0" yDepth="0 to the "frame" tag. This is frequently the third line of the file.
Note: no "is3d" and addition of "xDepth" and "yDepth".
<frameChart autoAdjust="false" font="Arial-12-bold">
<frame xDepth="0" yDepth="0" type="None" outline="black" leftAxisPlacement="Back" isHGridVisible="false" isHStripVisible="true" >
<background minColor="#FDFEF6"/>
</frame>

Similar Messages

Decrease the size of a series marker on a bar chart

I am trying to decrease the size of a square series marker on a bar chart in crystal reports.
Usually this can be achieved through the 'appearance' tab in the 'chart options' menu.
However as I have changed one of the series(bar) on the graph into a line, this no longer seems possible.
Is there a way around this?
Thanks

Hi Natalie
In order to decrease the size of a square series marker after changing the series into line, you can use Format Series Marker -> Border -> Thickness.
Hope this helps!
Regards
Poonam Thorat

How can i use cropping in imovie 11 on the clips that i cut away with and still put it in HD

Hi there,
I do have one problem dealing with the videos I make in my iMovie 11: I want to set my videos to HD using Quicktime. I already know how to do that. But, the problem is that I use cropping and ken burn effects on my vids when I use cutaway (a really major problem since I use this most frequently in my videos), picture-in-picture, and side-by-side. After I exported my vids to Quicktime, I wanted to look at them. But, for some reason when I was watching my iMovie videos on Quicktime, it included every little bit of my clips. It didn't crop the clips at all. It showed everything. I'm kind of upset about this because I have projects due this month and I really didn't want part of some clips to show. I really needed them cropped and/or ken-burned. Plus, I need to set them on HD.
Whenever I played it back in the iMovie preview, my videos played exactly as I wanted it to play. The cutaway clips, picture-in-picture clips, and the side-by-side clips were cropped and ken-burned just as I wanted it to be. But, on my Quicktime, it didn't do the same.
Here's the procedure that I use to export my videos:
Step 1: I finish making my video with the cutaway clips, picture-in-picture clips, and side-by-side clips already cropped and/or ken-burned.
Step 2: I click on "Share." Then, I click on "Export using Quicktime."
Step 3: I click on "Options."
Step 4: I click on "Settings." Then, I make sure the Compression Type is H.264, Frame Rate is Current fps, Key Frames is on Every 24 frames, Frame Reordering is checked, Compressor Quality is on Best, Encoding is on Best Quality (Multi-pass), and the Data Rate is on Automatic. After this is done, I click "OK."
Step 5: I click on "Size." I make sure the Dimensions is on 1920 x 1080 HD (mainly because I really need it in HD for doing projects for school and uploading other videos to Youtube, Dailymotion, and other sites). I also click on Preserve aspect ratio using: Letterbox. Then, I click "OK."
Step 6: After I set the settings for Sound, I make sure that Prepare for Internet Streaming is on Fast Start. Then, I press "OK."
Step 7: I save my file name and export to Quicktime.
Step 8: Once it already exports to Quicktime, I open the file and look at my video that I just made. (At this point, I realized that my videos that were used as cutaways, picture-in-pictures, and side-by-side clips didn't show the parts I cropped or ken-burned on. It practically showed every little part of that clip that I use those effects on. I really wanted it to be cropped or ken-burned as much as possible.)
So, that's my problem that I have at the moment. I really needed it cropped and/or ken-burned and set the video on HD. I would really appreciate your thoughts on how I should fix this problem.

On one of my clips it says:
Format: Apple Intermediate Codec, 1280 x 720, Millions
16-bit integer (Little Endian), Stereo (L R), 48.000 kHz
Current Size: 1280 x 720 pixels (Actual)
Another clip I use says:
Format: Apple Intermediate Codec, 960 x 540, Millions
16-bit integer (Little Endian), Stereo (L R), 48.000 kHz
Current Size: 960 x 540 pixels (Actual)

I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

Thanks for that info! Even in my time answering questions on iMovie Discussion Group, I never had a good understanding of when and how Optimize Movie came into play. I always would import as Optimized and Large Size and figured that was good enough. But knowing you got much, much more flexibility doing it the way you describe gives me a much better understanding of the different routes you can take into the Event Library.

Changing the Color of Crop and Bleed Marks from Registration to Black

Hello all,
I have been searching the web and have tried numerous things but I can't seem to solve this problem. In InDesign crop marks and bleed marks are printed in "Registration" color. I understand why that is needed for plate printing. However I am laser printing and I need those marks to be in "Black" color. I have tried to edit the cropmark script by changing "Registration" to "Black" on the line with myRegColor. I have tried changing the printer setting to "Pure Black". However I can't get the crop and bleed marks to print in "Black". I have been on various websites and while there are people asking the question I haven't found a answer that works. I have searched this community as well but haven't found an answer that I understand. Before I manually make crop marks I want to make sure I am not missing something completely obvious.
With laser printing there is a different charge for color and B&W. The fact that the crop marks are coming in as color and not black means B&W pages are counted as color in the printing cost. I have tested the same docuement (which was just one page full of sample black text) with and without crop/bleed marks. When the document is printed without the marks the printer clicks as a B&W page. When it is printed with the marks the printer click as a color page.
I am creating the doc in InDesign and exporting to Acrobat for printing. I am using Creative Cloud so I think I have the most up to date version of InDesign.
Any help would be much appreciated. Thanks.
-TS

With CS6 or later you can export to grayscale and in that case the crops will be black only. Like this:
You should set your Appearance of Black to Rich black otherwise 100% black CMYK might export to something less than 100% grayscale. When you check the PDF in Acrobat set the simulation profile to the grayscale profile you export to.

Save pdf with crop and bleed marks in Photoshop cc 2014

! !Hi,
I used to save PDF for print with crop marks in Photoshop by setting them up when using "save as". Don't have that option any more in CC 2014. Is it a new way to do it or I have something turned off?
Thanks!

I can get crop marks by using the "Print" menu and printing to PDF. My question is: How do you handle bleeds when printing crop marks in the "Save" or "Print" stage? Aren't the crop marks placed at the file extents?

Crop Marks on the image

Hi All
I am producing some exhibition panels and our printer would like the crop marks actually on the image. When I export to PDF the crop marks appear in a white area around the image - is there any way I can remove that white area and show the crop marks on the image?
Thanks

Daniel lists two choices. A third choice is to use InDesign's custom cropmarks feature, which came up twice today! Wow!
See http://forums.adobe.com/message/3637984#3637984, etc. for some more details. It is a bit tricky to set up, but works well once it is done.
I'd like to second Daniel's second post:
We're approaching a point where a screen shot of your pdf's might be worth a thousand words.
Please post a mock-up of what you want, it would be very much more helpful!
Macinbytes wrote:
If you have illustrator you can remove the marks. InDesign's marks will
be .25 pt Registration 100% stroke and have a 1.25 pt Registration 0%
stroke behind them.
If I may, I would like to strongly disagree with this suggestion. Illustrator is not a tool for generic editing of PDF files. It has been known to cause problems when editing mildly complicated InDesign documents, and the set of PDF files it can edit and operations it can perform is not a superset of InDesign's. It is partially overlapping.
Also, any hand-editing of marks is going to be a pain. Why include the marks if you are just going to remove them? Mark them in InDesign as Peter suggests.

Trouble with Crop and Trim Marks in Illustrator CS3

Hi,
I'm creating a print document (in Illustrator CS3, using Windows Vista) and sending to a professional printer who requires trim marks. I've created my document so that there is 0.125" trim area on all sides to bleed. Here is what I'm doing to create trim marks:
Artboard is set at desired print size (5.5"x8.5") + 1/8" trim= 5.75"x8.75"
Object>Crop Area>Make This give me crop marks at the edge of my artboard
then I do
Object>Crop Area>Release This allows me to change my crop marks to my desired, 0.125" size
Then i do
Filter>Create>Crop Marks This shows me my crop marks exactly where I want them in a red retangle
then I save the file as a PDF and select the following settings:
Press Quality
Marks and Bleeds: I select the "Trim Marks" box to print the trim marks
If I tell it to show bleeds, it only shows up on the top and bottom, not left and right, even though there is "0.125" in all fields.
(Although these have only showed up for me once, I cannot get it to show up again)
When I select "Save" and then view the file, the trim marks are there, but not were I specified them to be. They show up at the edge of the artboard.
When I change the Artboard to letter size (8.5x11), THEN the crop marks show up where they're supposed to be. Why is this happening???
Any thoughts?? Thank you!

I can get crop marks by using the "Print" menu and printing to PDF. My question is: How do you handle bleeds when printing crop marks in the "Save" or "Print" stage? Aren't the crop marks placed at the file extents?

How to add marker on the clip?

Hi!!!
Could you help me, how to add marker on the clip? Not on the sequence. I need the marker to moving as I moving clip in the sequence.
Thanks!!!

Ohhh... I just had to switch to the source monitor. OK. Just I don't use the source monitor usally. Only the program one. Thank you. It worked!
Fri, 12 Oct 2012 05:02:08 -0600 от Jim Simon <[email protected]>:
>
>
    Re: How to add marker on the clip?
    created by Jim Simon in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion

The periphery of the picture on the clip is cropped? Smaller on the exported clip?

When I take a clip to the project liberary it becomes cropped and the periphery of the exported clip is cropped, can you help please?
Thank you

This is probably the Image Stabilization, which works by zooming in.
You can turn it off by clicking the little gear icon in your project clip and going to the Clip tab of the Inspector. Turn off image stabilization, or reduce the zoom level.

I have justed upgraded CS2 to CS5. How do I set artboard crop or trim marks for printing?

I have justed upgraded CS2 to CS5. How do I set artboard crop or trim marks for printing? It was under the "OBJECTS" menu in CS2, but I can't find it in CS5.

it actually works the same way but better you don't see it that way but with perhaps more experience you might catch on and say "oh now I see that' all I have to do.
Multiple artboards, which you did not have in CS 2 , changes the equation.
When you open a new document you can set up a gangup in the new document dialog then say for a business card then do one business card in the first one.
Then copy the art and text of that first one and in one command paste that art in all of the artboards with one command, you can then make another artboard that encompasses all the artboards and you now have a gang up say six up you can now print all a once as a gang up or print a range of the artboards or specific artboards.
As a matter of fact now that you can paste on all artboards with one command AI CS 5 actually has a step and repeat feature that works verticaly and horizontally at the same time. And an improved version is easily had.
Also since you probably know how many you need of this first artboard then you can simply make one rectangle for for the first artboard and give it a crop area effect and when you do your copy include the rectangle and then paste on all artboards and there you are
look at the video, see how cool. less complicated not more complicated. And as other users explore this function I bet they come up with even better ideas.
http://mysite.verizon.net/wzphoto/Artboards.mov
I am going to make one adjustment here instead of doing a command c to copy the first artboard it would be better to do a command x to cut the first one since the command paste on all artboard does exactly that. So if you do a command c and a command option shift v then you have two rectangles and art and crop marks pasted on top of each other. Probably won't do any harm but might be confusing in the layers panel.

Specified Crop and Bleed marks staying in place, when scaling in proportion?

Hello,
A colleague of mine asked me a question I could not figure out...
In CS5.5 and below, if he had a document that let's say had a .5" bleed and he printed the document at 50%, the bleed marks would also scale in proportion and be .25".
Now in CS6, the Bleed and Trim marks stay the original size/location no mater what the document is scaled?
Has anyone else seen this?
thanks!
babs

I can get crop marks by using the "Print" menu and printing to PDF. My question is: How do you handle bleeds when printing crop marks in the "Save" or "Print" stage? Aren't the crop marks placed at the file extents?

Clip gets cropped when importing to iMovie 9

Hi I am trying to import video from a Samsung HD camera into iMove 9. The clips appear in the event file but when I play them the last 5 or seconds are not there - they seem to have been clipped in the import process.
Any one got any ideas?

So the playback stops altogether after about the 20 minute mark? It doesn't just start a new clip?
The scene length limit shouldn't matter assuming it's unchecked. You might also uncheck the Start a new clip at each scene break.
Is the camera running on batteries? If so, try using the AC adapter.
You can try importing once more if you want, but if it were me, I wouldn't waste the time. I'd just make a new clip of the missing portion with enough overlap to be able to crossfae from the audio on the first clip to the audio on the second clip. That should help minimize the audio gap.
The trick is to allow the music crossfade to complete prior to the edit in picture. It will take a bit of trial and error to get the sync right, but I think it will still be fast than completely re-importing from tape.
Matt

How do I resolve share frame errors (-1) with frames in which FCP seems to place a transition mark in the form of an L-shaped or reverse L-shaped figure?

When I try to use Share to a master file, I get an error that states: "The share operation Master File has failed. The operation could not be completed because an error occurred when creating frame 158 (error -1)." This has occurred with different frame numbers. When I delete them, it might disappear for that frame, but then shows up later for others. It seems that the problem is occuring right at the transition point between two clips. FCP seems to be putting an L-shaped figure on the last frame of one clip and a reverse L-shaped figure on the first frame of the next clip. The faulty frame seems to be one of those two frames. The clips I am having trouble with were from an old, non-digital cameral. We had converted them to DVDs and then I converted them to MPEG-4 files using Mac X DVD Ripper Pro. The converter seems to work fine and I can play the converted movie with Quick Time. Also, FCP will import the converted movie and works just fine with it as a clip and in the timeline. But when I try to share, I keep getting these errors. Short of deleting all of these old clips from the movie, which would be sad, how do I solve this problem?
After looking at previous discusion threads I have already saved to a new project, deleted the clip and re-imported it, and eliminated the transition effect from between the clips. But I still get the same errors.
I also get an error when I try to share to DVD, but that error is a "0" error that doesn't mark the location of the problem. I'm assuming it is the same problem as the one when I try to share to master file.
One other weird thing is that in a slightly older version of the movie with the same clips, I was not able to share to DVD but it did share to a master file. That almost seems like pure luck right now.
Please help!

MPEG-4 should not be used in FCP unless it is converted first or optimized in the application.
Trash your preferences. Trash your project render files. Switch off background rendering. Do not re-render. Export your projects.
Ignore the last frame and first frame indicators.

The starting quote marks at the end of a line in my epub file are separated from the words quoted.

The starting quote marks at the end of a line in my epub file are routinely separated from the word quoted which appears on the next line. The formatting contractor accurance.com who prepared this epub file tells me that this is a feature of Adobe Digital Edition 2.0 and that there is nothing they can do to correct this. Are they correct, or else how can this problem be overcome?

I'm not sure about buying css style sheets.
You don't need one for each book; if you want to have a series of books all with the same general format,
then they should all use the same style sheet on a given device, but maybe different style sheets for different devices.
All the books will then have one consistent look on a given device, and a different consistent look on another device.
ADE only runs on PCs and Macs. There are lots of different ereader software apps out there for running on different devices.
For a dedicated device, you are stuck with the reader the device provides.
For tablets you can download different ereader apps, for example Bluefire (my favourite, ios, Android), Aldiko (android) and DReader and DL Reader (windows RT).
I don't know if the readers/apps are derived from the same root as ADE in any way and likely to show similar bugs.
If it is not DRM, you should certainly try on Calibre, which is the most popular (free) ereader app for computers.
If you care to create a very short non DRM extract (complete with css) and post it somewhere on the web I'll have a quick look.
If you have inclination to get more involved yourself,
there is free software called sigil (https://code.google.com/p/sigil/) that will help you get off the ground and experiment.

Cfchart: clips or crops my series marker at the top of the graph

Similar Messages

Maybe you are looking for