Change amount in the partial invoiced sales Order
Hi experts,
I have a query in Sales. Say I created an Order with Part A for 100 qtys selling price for ea as USD10. Out of which 50pcs are already shipped & invoiced.
But for the remaining 50 pcs the price in the Sales Order needs to be changed to USD20.
Becos it is invoiced I could change the amount in the Sales Order.
How can user modify for Partial qty? Pls share.
Regards,
P
Dear Anne
Since partial delivery has already been made, you cannot change the price in the sale order for that particular line item. <i>Even if you create a new line item, it wont update</i>.
For that first go to VK11, change the price and save. Now come to VA02, block the new line item by clicking on left tab of the new line item, select "<i>goto</i>" on top - item - Sales A.
Here you will see a field "<i>Pricing Date</i>". Change that manually to current date and press enter. Now only, your pricing condition will be updated in the sale order.
However, if you dont want to do this exercise and you are making delivery related billing, through copy control VTFL, this can be controlled.
In <b>VTFL</b>, select your billing type and delivery type, click "<i>Item</i>" tab on your left, select the item category, click blue lens on top. You can see a field "<i>Pricing type</i>". Maintain "<b>B</b>" here, so that irrespective of order rate, your invioce will be updated from VK11.
Thanks
G.Lakshmipathi
Similar Messages
-
Changing Profit Center in Partially Delevered Sales Order
Dear Experts,
Can anybody tell me how we can Change Profit Center in Partially Delivered Sales Order?. in Standard, System allows to change PC in open sales Order without any subsequent documents.
There is business requirement to change PC in all Open Sales Orders.
br,
vgl.Try this.
Go to MASS, Key in Object Type BUS2032, select Table MASSVBAP and click on "Fields". There select the field "MASSVBAP-PRCTR" and execute.
Next paste those open sale orders and again execute. There maintain the required Profit Center on top cell and click Carry out mass change.
thanks
G. Lakshmipathi -
Changes Allowed on the 3rd Party Sales Order when PO is created
Hello,
We have a requirement to change the Sales Order even if the PO is already created for teh 3rd party order. I am not sure which fields and what changes can we do if the PO is already created for the 3rd Party sales order.
Can you please guide me in pointing to the configuration or any user exit that we can control the field changes on the 3rd party sales order when teh PO is already created.
Thank you!
ChandrakantVenu,
FIRST ANSWER THE BELOW TWO QUESTIONS.
1. Did you understand what Shiva has mentioned?
He has clearly mentioned that you can change the PO qty and in standard it self the same PO changed qty will be reflected in Sales order schduline lines qty, and he also mentioned that if this is not happening then advised to refer the Note 1361281.
2. Did you read the note?
It says that It will occur if the sales order line item is part of the delivery group or if you have set the complete delivery indicator for the sales order. And it also advised to apply the program code to over come the issue.
Please note: before commenting others just check once in system then talk, don't just blindly through the ball, it will not have good results.
Before also mentioned the same, but you still repeating the same.
Sorry Moderators that i have mentioned some lines in the Note here.
thanks,
Srinu. -
Change customer PO number on a partially billed sales order
Hi,
Is it possible to change customer PO number on a partially billed sales order? We have tried this but gets the error message "Item 00010 has already been billed, quantity 0 not permitted'. This is for a direct shipment.
Thanks & Regards,
KeshiniHi,
See whenever you have subsequent document for any type of documents, then its very difficult to change the Header data.
As PO number is in header, So as per standard i dont think u can change the PO number.
But there is field also in PO item, there u can change.
Thanks,
Raja -
Changing the payer in sales order other then BDC, LSMW
Hi Friends,
We are working at BHEL,
here we want to change the payer instead of old payer for all open sales orders is , is there any possibility to change the payer in sales order other then LSMW , BDC , those two are not helpful for us because there is lot of incompleteness logs in my incomplete procedure,
please suggest me to proceed further,
regards,
Gangi Reddy.Hi Gangi,
I have explained the CATT procedure, step by step, on 31/03/2007 for another mass updation requirement in the same forum with subject as 'Regarding Customer Master'.
Have a look and let me know if you have further doubts.
Rewards if helps.
Regards
Nadarajah Pratheb -
How can i change the title in the system form 'Sales Order Form'
hai
how can i change the title in the system form 'Sales Order Form' and then how can i call this form?Hi Sanjoy,
You find the form property like this :
SAPbouiCOM.Form oForm = null;
oForm = SBO_Application.Forms.Item(pVal.FormUID);
oForm.Title = "New Title";
Michael -
Error while executing the RA of Sale order
Hi,
While executing the RA of sale order, we are getting the error-Cost element 50XXXXX (line ID CPR) already used for line ID RPC. As per our configuration Cost element-50XXXXX is assigned to the Line ID CPR only and there is no where assignment to line item-RPC. In the change log of OKG4 and OKG5, there is no assignment of CE-50XXXX to line id-RPC.
Could you suggest where could be problem for this issue.
Thanks & Regards,
RanjanYou must have assigned cost element in OKG5. You also need to assign in OKG4 same line ID to secondary cost element.OR else remove the cost element assignment in OKG5.
Regards,
Mahendra -
How to re-explde the BOM in Sales order
Dear Friends,
In sales orer there is any provision to Re-explode the BOM in sales order.we have make some changes in BOM.Now we want to re-explode the BOM in Sales order so that BOM Components can be available in sales order.
There is any field available in sales order for that?
Please relpy.
regards,
NITINDear Nitin,
go to VOV4 do this confioguration for item catagory determination.
ZB01 ERLA TAQ
ZB01 ERLA TAP TAE
ZB01 ERLA TAQ TAE
ZB01 NORM TAE
ZB01 NORM TAN TAE
ZB01 NORM TAP TAE
ZB01 NORM TAQ TAE
here ZB01 is the order type
now you can see we used three item catagory TAP , TAQ and TAE
TAQ is the first level TAP is the second level and the final level is TAE.
now for multy level explosion go to your item catagory
and go to bills of material tab in the field "structure scope" select "B-Explode multi-level bill of material"
then do a transaction and check
Regards
Subrat
Edited by: subu sd on Apr 2, 2009 1:11 PM -
How to restrict the Number of sales orders in theTCode:VL10A whil creation
I'm creating the Delivery by using the batch job with program: RVV50R10C Here I need to restrict the number of sales orders numbers while creating deliveries for sales orders
Like system should pick the sales orders (sales documents) from 1 to 100 OR 100 to 200
Please advise me how to do it and what changes I need to do itHi,
Aslo, you can see Note 198137 - VL10: Customer-specific enhancements / user exits. As is for SO, check subroutine LV50R_VIEWG03. If cf_subrc = 1 thin this SO isn't seen in list.
***INCLUDE LV50R_VIEWG03 .
*& Form POSTAB_VEPVG_FILL_USER
FORM POSTAB_VEPVG_FILL_USER
USING IX_LIST_PROFIL TYPE SHP_VL10_LIST_PROFIL
IX_PARAMETERS TYPE SHP_VL10_PARAMETERS
IX_SELECT_OPTIONS TYPE SHP_VL10_SELECT_OPTIONS
IT_ENQUEUE TYPE SHP_VL10_PACKAGE_T
IX_SD_ORDER TYPE SHP_VL10_SD_ORDER
IS_VEPVG TYPE VEPVG
CHANGING CS_POSTAB TYPE SHP_VL10_ITEM
CF_SUBRC TYPE SYSUBRC.
CF_SUBRC = 0.
* cs_postab-zzfield = ...... "add new field to List
* if xxxxxxx = yyyyyyy.
* cf_subrc = 1. "Exclude this index from List
* endif.
ENDFORM. " POSTAB_VEPVG_FILL_USER
I hope this helps you
Regards
Eduardo -
Need of User-Exit in the creation of Sales Order(VA01)
Hi,
In the creation of Sales Order, I need to Compare the Ordered Quantity and Confirmed Quantity. If the CQ is less than OQ I need to create one more line item with the same material for the rest of the quantity and send the request to Production order for the remaining quantity. For this I am unable to get the exact exit. Please help me in this regard ASAP.
Thank you.the following program are the user exit for billing.
we often use RV60AFZC and RV60AFZZ.
RV60AFZA
RV60AFZB
RV60AFZC
RV60AFZD
RV60AFZZ
RV60BFZA
For Sales order
Pricing, item addtion deletion
MV45AFZZ
First, I did not find documentation for the BADI either. But at the first glance the process of implementing it looks quite straightforward. I assume you run R/3 Enterprise (4.7). So, you should implement BADI 'BADI_SD_SALES' - this must be done in transaction SE19. In particular for the purpose of adding some additional items into sales document I would implement method SAVE_DOCUMENT_PREPARE. This method has changing table parameter FXVBAP of type VA_VBAPVB_T - it holds all the sales document items. Just add items of yours to it. Certainly, you have to fill all the appropriate fields carefully.
Hope this helps somehow.
In that case you should use USEREXIT_DOCUMENT_SAVE_PREPARE subroutine (form). As far as I remember it has no parameters. To add items to the sales document you should modify internal table XVBAP.
regards
vinod -
Change item category Display mode in sales order (Third Party )
Hi all,
I am creating sales order with reference to sales contract but at the time of sales order we don't have enoff stock to deliver to customer , so we have deiced to Third party sales process
But the problem is while creating a sales order with reference to Sales contract the line item of the sales order in grad Mode ( Not changeable mode )
Can any one guide me how sales order line item should be in active mode so i can change the Item category as a TAS third party item category
Help me regards this
Thanks
RajeshHi all.
Thanks for response
I maintain all configuration, But the problem is while creating Sales Order with reference to Contract
the Sales Order line item in grad Mode i am unable to change item category as TAS
i mean TAN is on Display Mode
and we are using Varient config for that material
Please guide me where i need to Configure so system should allow me change item category in sales order please guide me
Thanks
Rajesh
Edited by: RAJESH KUMAR on Jun 16, 2009 10:23 PM -
Can we restrict the partially confirmed production order from getting delet
Dear all,
Can we restrict the partially confirmed production order from getting deleted?
I.e. if the production order is having status PCNF then the deletion flag indicator (status DLFL) should not be allowed to set
SmanS
Edited by: SAP PP Consultant on Feb 4, 2009 6:12 AMHi,
Then must be there is change in BS22.Check allowed transaction setting for Status PCNF/CNF .For reference purpose compare it with other client IDES or sand box.
For your reference I have pasted Error log on the same.
Balance of ORD 1000000702 is not zero
Message no. KO115
Diagnosis
The balance on object ORD 1000000702 is not zero. That is, there are still costs on the object.
System Response
The object cannot be closed and the deletion flag must not be set.
regards,
Dhaval -
I want to give sales discounts only for the first five sales order
The scenario is that I have to limit the sales discount to first five sales order that is executed, from the 6th the system should not allow any sales discounts
Hi,
If I understand your requirement correclty you want to pass discount for a particular item for a customer only for the first five sales orders irrespective of the quantity you sell on this order. As I understand this way of limiting discount by way of the count of sales orders is not possible.
What is though possible is to limit the discount per customer or per article or per customer and article combination to either a certain fixed value of discount or limit the discount to certain fixed quantity sold for that article.
The config required is
Condition type : Scale basis -Either value scale or quantity scale. Scale type -leave this blank.
Condition record :Chose the scale type as "B- To Scale" and at the time of condition record creation you can define your own Calculation type -either fixed amount,percentage,quantity etc.
All the best.
Kartik Shah -
Delivered Quantities In a partially delivered sales order
Hi All,
My client want the report of delivered quantities and quantities to be delivered for a partially delivered sales orders.
How to get this. Is there any transaction code for this.
Reward points for helpful answer.
Regards
AshisTo check open quantity, check T.Codes: VL04, VL10C.
Standard SAP SD Reports:=
Statistic Group:
Purpose To capture data for Standard Reports, we require to activate Statistic Group as under:
--> Item category (Configuration)
--> Sales document type (Configuration)
--> Customer (Maintain in Master data)
--> Material (Maintain in Master data)
When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
Configuration:
IMG --> Logistics Information System (LIS) --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Statistics Groups -->
1. Maintain Statistics Groups for Customers
2. Maintain Statistics Groups for Material
3. Maintain Statistics Groups for Sales Documents
4. Assign Statistics Groups for Each Sales Document Type
5. Assign Statistics Groups for each Sales Document Item Type .....
All Standard Reports which are available are as under:
SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
3. Sales organization -> Sales organization / Sales office / Sales employee
4. Shipping point -> Deliveries / Returns
5. SD documents -> Orders / Deliveries / Billing documents ...
& so on.
Regards,
Rajesh Banka
Edited by: Rajesh Banka on Apr 23, 2008 8:24 AM -
Change mode of the excise invoice is showing zero excise values
H ifriends,
The change mode of the excise invoice is showing zero excise values.....and the same is reflected in the ARE1
While creating the excise invoice,its showing BEd/Ed and Shed and after saving,if i check the doc the values are shown aero...
Thanks
Sasis
Maybe you are looking for
-
Adobe, you've screwed me Big Time, you greedy bastards! I bought the Master Collection CS4 (windows) last summer, in preparation for a two-year college course. My school had versions 4 AND 5 (Mac), so other than the InDesign backward-incompatability
-
Oracle 9i OCP or Oracle 10i OCP
hi, I want to get Oracle OCP. I am wondering which certification is worth my effort to get at this point: Oracle 9i or Oracle 10i. What is the big difference between them? Thanks Acton
-
Hi, In cost roll for a material, when the material picks up PO price the cost is flowing correctly to the material and surcharge cost components but when there is no PO it picks up planned price but the price goes to surcharge instead of material, wh
-
Do i need to render videos in PRE7?
Hello, i am new to Adobe Premiere Elements 7 I was wondering, everytime i add a video to my timeline and preview it, it lags for some sort of reason. After searching, people suggested that i render the video by pressing the 'enter' key. Do i really n
-
I have this SELECT below which i have to run it in a LOOP for every activity_id(record) that i get from the join. Also,this SELECT has to be run in multiple places in a procedure to get details and for that records-->I run the assign_course or assign