Change document - Workflow Event Container value not passed

Hi Iam working on a customer create notification scenario where in we are sending a notification to SAP Inbox whenever a customer is created.We are checking industry key(KNA1-BRSCH) value through a check function module.When the customer is created in the system the system triggers the corresponding even it gets in to check module and an exception is raised saying Industry key does not have any value.
Problem is Industry key value is not passed on to the container.
Where might be the problem...?
Is anything missing in SWEC(Events for change document)
-but the event is trigerred...container value for industry key not passed...
Please advice...
Thanks in advance!

Refer to link below.
Sandy

Similar Messages

Change Workflow-Instance-Container values

Hi Experts,
I would like to ask you how to change a value in a container of a Workflow-"Instance".
For e.g.:
I have a workflow-instance which contains a (bor-) Object "Switchdocument". This switchdocument contains also a (Bor-) Object "serviceprovider". And I would like to change the value of the parameter of "serviceprovider".
How is the relationship between the "father"-object and the "child"-object and where are the relationship saved?
I know the table "sww_cont" and "sww_contob". But these tables are not enough, aren't?
Because in the mentioned tables (sww_cont) I see the elements with their values of the container of the workflow-instance. I don't the elements with their values of the object (father-object) contained in the workflow-instance-container and also not the elements with their values of the object (child-object) in the father-object.
or (explanation as a list)
Workflow-Instance-Container:
1.element
2.element
3. Switchdocument (object) (father-object)
3.1 element of switchdocument
3.2 .....
3.3 Serviceprovider (object) (child-object)
3.3.1 element of serviceprovider <--- here I would like to change the value
I hope I explained the situation in a detail way
I apologize if I don't use the right terms!
If anyone has a hint or a way to get to the "child-object" I would be very thankfull.
Thanks a lot for your answers in advance!!!
with lovely regards.

Hi all,
at first I thank you all for your answers!!!
As I understand the values are permanently saved in the subobjects. Like I said the subobject (Distributor) with the attribute, e.g. Serviceprovider in Own System = 'X' is contained in the Object Switchdocument.
That means for me that I have to retrieve the attribute of the subobject via a method for the special instance and change it, e.g. to set it blank.
I have forgotten to say that I am developing a report (se38) to change all attributes of workflow-instances with object/subobject.
As I said above in a condition step it is asked whether a "serviceprovider is in own system". if yes (means = "X") then the process has another way. And I have to change the "X" to "blank", so the workflow goes always the, in my case, second way.
For the next time, I will explain my problem in a more detail way
Thanks again.
with kind regards!

Sales Document Flow - Ref. Value not showing correct currency

I have a question about document flow currency in ECC6.0. We recented upgraded to ECC6.0 from 4.7 and noticed the changes to document flow. We are a US based company with sales offices in Europe. Our European offices are finding that that document flow in ECC6.0 shows in base currency of USD. Even thought the sales order was entered in EUR euros. Is this intended to be this way; since it is causing our offices in Europe some confusion? I searched forums an SAP notes and did not find any references. Has anyone see this in ECC6.0
Example Document Flow: Line Level (I do not see Ref Value at header level)
Note Sales Document was entered in EUR euros.
Document     Quantity     Unit     Ref. Value     Currency
Standard Order 0025082768 / 10     12 EA     5,207.54 USD
...Delivery 0080211725 / 10     12 EA
.....Picking request 20100423 / 10     12 EA
.....Handling unit 0001221687 / 1     12 EA
.....GD goods issue:delvy 4901261948 / 1     12 EA     1,690.08 GBP
...Invoice 0092006736 / 10                           12 EA     5,207.55 USD
Accounting document 0092006736     12 EA
If I highlight top line in document flow, I see the following in lower part of screen. This is the currency entered on the sales order.
0025082768     10          12     EA     3,847.80     EUR

Smile,
Thanks for pointing those configuration points out.   I checked my system and found the following. I do not see any change documents for the configuration points, so they have been set this way since our implemenation in 2005.
XD02 is customer master change, the customer on my order is set to EUR in sales in distribution tabs.
OX02 - Company Code
1000     Middleton     USD...ok
2000     London     GBP   ok
2100     Munich     EUR...ok
2210     Amsterdam     EUR...ok
4000     Hong Kong     USD...ok
I think OVX5 is not set correctly, should be same as OX02. If I change them, do I need to run an update in the system for old data? Or is it as simple as changing the value here? I'm hesitant to change this not knowing how this will affect the system. Do you know?
OVX5 - Sales Org
1000     Middleton     USD...ok
2000     London     USD   should be GBP
2100     Munich     USD   should be EUR
2210     Amsterdam     USD...should be EUR
4000     Hong Kong     USD...ok
Thanks,
Tony Romain

Container values not appearing in alerts - SAP CRM 7.0

Hi Experts,
I have 2 issues:
1. I am calling an alert on lead creation by calling an action with processing type as TRIGGER ALERT.
The alert appears on the home page but the container values defined in the long text are not appearing. The containers defined are as follows:
OBJECT_ID - Object type - BUS2000108 - business transacton number
Call later date - Z field in CRMD_ORDERADM_H - structure - CRMD_ORDERADM_H - Field Zabcd
Please let me know if there is something i'm missing or if i need to define these values in the Method TRIGGER ALERT???
2. If i want to call this action on a particular date (call later date as above), is it possible to take the reference of this date in the start condition?
Regards
Nitin Sehgal

Dear Nitin,
The first I am not sure, so hopefully someone else can help you with that.
For the second, If you want a Z-field to be used in the action conditions, you should add an attribute to your BOR-object in SWO1.
How to do this can be found here.
[http://sapcrmweblog.blogspot.com/2011/01/adding-attributes-to-bor-object.html|http://sapcrmweblog.blogspot.com/2011/01/adding-attributes-to-bor-object.html]
Hope it helps...
Regards,
Pieter Rijlaarsdam

Values not passing from program to Layout

Hi Abaper's
My requirement is I need to set company logo in Invoice ( VF03 ) if a particualar condition satisifies, for this I have set a FLAG in my
driver program and called the FLAG in my Script Layout.
Here my issue is, for certain invoices the FLAG set in the program is being called in the Layout and Logo is displayed in invoice copy ( when excuted both in foreground and back ground).
But in certain invoices, if run in foreground none of the values ( means not only flag but also all the values to be passed to layout)
is displayed in invoice. It is only displaying the hard coded values in the layout ( showing blank page ).
and if I run in background all the values are passing to layout except all Global Variables (flags) in the program even though it
has value in the program.
Please advice what should be the problem, I have checked with my Functional and it seems to be fine in customization part.
Karthik
Edited by: Karthik R on Sep 21, 2010 2:42 PM

Hi Tamas,
I have tried it, but still not able to figure out the exact problem....since while running in background or foreground some of the all values including my logo are displayed in invoice but for some invoices none of the values from driver prgram is getting passed to layout while running in forground....but when run in background all values are passing except the FLAG set in the drvier program.
what should be the reason for this ? for some invoices all the values from driver is passing to layout but for some cases its not passing

Values not passing from form to context attributes (value attributes)

Hi Experts,
I have bound the properties of theadobe interactive form (WD-Java) to the context attributes but the values are not passing to the value attributes at runtime.
For your information I have not bound the pdfsource binary attribute of the view to the custom controller pdfsource binary attribute.
Please advise.
Thanks,
Shobhit

Context
   GetData - ModelNode mapped to controller context (DataSource)
         Attribute1 - Value Attribute (Form Field)
Is it allright to have the Data Source as a ModelNode (mapped to the controller context node) and then have Value Attributes under the ModelNode which are then bound to the adobe form input fields.
I know its frustrating to advise on such questions without looking at the code actually. But I would definitely need your support.
If possible could you mail me a project of yours where you have the form being PREFILLED with some values coming from a RFC FM and then the same form gets posted to SAP though another RFC FM.
Thanks,
[email protected]
OK. When I create a Fresh Adobe Interactive Form application, it works fine.
The problem Im facing is in the case, when Im using an existing PDF file created in the ABAP stack (TCode SFP). I am importing this PDF file into the WebDynpro Java Application and then binding the fields. So in this case the context binding does not work.
You guyz are right, I need to check if there is any other script which exists. But still what are views after this update?
Message was edited by:
        Shobhit Swarup Mathur

BRM - Derived roles values not passing to backend

Hello ,
When we define a derive role with org values in BRM . derived role getting created in backend but it is not passing org values in backend .
org values are empty in derived roles for backend system
we have finished su25 activity as well in backend
we are in sp12 on NW7.31
Any solution available
Regards
Rajendra

Hi Andrzej,
Generation and maintain authotization are working fine .
My issue is, in derivation phase, when I derive a role in BRM,
the derived role which got created doesn't have org values in backend system.
So I want to know whether this is bug or Derivation phase in BRM will not pass org values to back end
Regards
Rajendra

Value not passing urgent

data:l_lotno like /JJVC/ERR851-master_lot_num,
        l_batno like mchb-charg.
loop at i_inv_data into wa_inv_data.
    l_batno = wa_inv_data-charg+0(1).
    if l_batno ca SY-ABCDE.
      translate l_batno to upper case.
      l_lotno = wa_inv_data-charg.
      perform f_idoc_851.
      perform f_idoc_52 .
      perform f_idoc850.
    else.
      if wa_inv_data-charg na SY-ABCDE
        and wa_inv_data-werks eq c_us11.
        l_lotno = wa_inv_data-charg+0(6).
        perform f_idoc_851.
        perform f_idoc_52 .
        perform f_idoc850.
      endif.
    endif.
endloop.
data:l_lotno like /JJVC/ERR851-master_lot_num,
       l_batno like mchb-charg.
IF p_werks EQ c_us11.
    SELECT   a~docnum    "doc number
             b~credat    "creation date
             b~status    "status of idoc
             b~statxt    "last error message
             FROM /jjvc/err851 AS a INNER JOIN edids AS b
             ON adocnum = bdocnum
             INTO TABLE i_idoc_error
             WHERE a~master_lot_num eq l_lotno
             AND werks EQ p_werks.
    IF sy-subrc <> 0.
    ENDIF.
the data in l_lotno and l_batno is not passing from the above if condition to the select statement can any one help me in this.

You have to declare the l_lotno and l_batno as global variables.
here they are local variables and their scope is withing the block in which they are defined.
Declare them outside the blocks(Performs etc)
Regards,
Ravi

Help on workflow event container creation.

Can any one tell me how to create event containers in workflow? If the steps will be given in details it will be very help.Pls

Hi,
Events are part of business objects, events are linked to workflows, in the linkage you can link the standard container elements, like initiator to workflow containers and you can link the attributes of the (then) instantiated business object to containers in the workflow.
You can create additional attributes on business objects in SWO1 (make sure you don't change the sap standard, rather create a subtype and uses delegation (also doable in SWO1) to "override" the sap standard.
You can create additional containers in pftc, type is WS and task is your workflow number after pressing change you can tick the tab container to create additional containers and in the tab starting events you can change the event-->wf linkage.
Kind regards, Rob Dielemans

Field Value not passed from IDOC (orders01) to File Generated

Hi All,
I have added a custom field to a PO at item level (ekpo-Ztest)and Passing it to OUTBOUND IDOC.
In process of passing to IDOC(ORDERS01) i mapped the field to segment E2EDP19001-MFRPN and i see the value in the IDOC when i view it in WE02.
The problem is when i generate a file i don't see the value of E2EDP19001-MFRPN
We are already using QUALF,IDTNR,KTEXT of E2EDP19001 and i see all the values of these fields being passed from IDOC to file generated .
Let me know as i'm missing anything in here
I quick note ,
I see 3 version for E2EDP19 Segment for orders01
Vesrion
002     E2EDP19002                             8     242     02/14/2005
001     E2EDP19001     40A                    5     160     08/19/1997
000     E2EDP19             30A                     3     108     04/03/1995
1)The version 000 and 001 are released but not 002 Version
2)May be i 'm using version 000 and its out put length is only 108 and these fields(QUALF,IDTNR,KTEXT) together occupy 108 and there is no room for my new field but My IDOC dispalys E2EDP19001 and E2EDP19002 and also it displays my new field but its the output file generated that doesn't show the value
Thanks

Resolved Myself
Thanks

Presentation Variable Value not passing when used in Column Formula.

Hello Gurus:
Please help me with my requirement.
We are trying to show a data backout in report, for example.
For a Product Group Code of 2435 which belongs to Report Line C059 has a Sales Amount of $4,266.90 and in report we want the same Sales Amount of $4,266.90 to be shown as -$4,266.90 (Negative) under a Report Line C080.
So in a report there should be same Sales Dollars as Positive for C059 (from Source) and Negative Sales Amount for C080 (Condition to be applied in Report).
Solution I Tried
I tried to create a Presentation Variable (SQL- Which would fetch me Sales Dollars for Product Group Code 2453) which returns with $4266.90 and then applied it in Answers in Logic (Case when Report Line = C080 then @{Presentation Variable}*-1 Else Sales Dollars END).
Issue I am facing:
Presentation Variable is coming as 0 and if i give any Format (Default Value) it shows the same default value in report. I checked the SQL i used and even when I Preview the Variable its showing me $4,266.90, but not in report.
Please let me know a way to get this Presentation Variable value into my reports.
Also please let me know if i can achieve this requirement in any other way.

Thanks for your reply Paul. But there is no Invoiced Amount for Report Line - 'C080' from source. Invoiced amount of C059 should show as -ve Invoiced amount for CO80.
In a report C059 should show +ve Sales Dollars and C080 should show same amount as -Ve Sales Dollars.

Variable values not passing with Web Application Designer

We are on SP 11
I have defined variables in the planning modeler (no personalization) that should be used when executing a copy function. The idea is to have ready input capability. For example, the variable VERSION is defined - when the planning function is executed, the user should have the ability to select a version value. I have defined TWO button groups to enable the user this feature, however the values will not override the default variable value defined in the planning modeler
BUTTON GROUP #1 - this is a copy function button with Display Varable Screen option ON. When I press the button, the variable entry WEB Page Dialog pops up (with the default value). If I input a differenct value, we get the error the the value characteristic is not included in the selection. If we use the drop down available on the dialog box to select available values, we get what's on the Web Template (it seems the drop down option is not working)
BUTTON GROUP #2. - This is a VARIABLE BUTTON using the Open Variable Dialog command (the expectation was to override the default value) When we use the drop down option on the Web Page Dialog, we have the ability to select the valuse available, however the value does not override the default value defined on the planning modeler.
Any suggestions are appreciated.
Regards,
Andrew Ramirez

Hi Andrew
I realise your posting is now 6 months old.
We are also on SPS11 and have a similar problem.
Did you manage to solve this problem>
Thanks
Ian

VALUE NOT PASSING FROM 1 PAGE TO OTHER PAGE ?

Hi friends
I have bsp application with 3 htm pages.
I have a input value in first page like i_matnr.
If i give input material no its valu is coming in second page.
But its not coming in 3rd page.So what i have to do?
Moosa

Hi:
you should put like
in page attribute,
declare matnr
and in oninputprocessing or at where you have put your query.
matnr = request->get_form_field( 'matnr' ).
Regards
Shashi

How to change the workflow event

Sir,
I have a workflow against sales order which goes for release as per release strategy . It appears in their SAP inbox until he approves it goes to the second person . Now one sale order has gone to a specific person's inbox . I want to reverse that and to send to other persons SAP inbox because the person is not available . Can we do it . If possible how it can be done .
Thanks in advance .

Hi,
You can have this functionality using substitute in SAP inbox, i.e SBWP. Got to SBWP-> Setting-> Workflow setting and here you can maintain substitute. You can mention dates during which this substitute is to be used. Person who will not be available should maintain this setting in thier SAP inbox.
Hope this helps.
Thanks & Regards
Tejaswini Khante

Drop down values not passed to second scenario stage

Hi,
I've created a drop down with specified values in the drop down list. The field is bound but when the form is opened in the second scenario stage these values have disapeared?
Any help appreciated.

Hi ,
Can you please post how did u resolve that issue .

Change document - Workflow Event Container value not passed

Similar Messages

Maybe you are looking for