Change in start date of tax depreciation in mid of year

Hi Experts,
Tax depreciation area is not for posting. The fiscal year is from Jan to Dec. I want to calculate tax depreciation from May 2011 based on Net Book Value of tax depreciation as on 30.04.2011. But once I change the start date of tax depreciation in asset master to 01.05.2011, the system ignores the previous depreciation so I am not getting the NBV of tax depreciation of 30.04.2011.
Is any setting is required to get this. I can not do changes in posting rules since this tax depreciation is not for posting any thing.
The fiscal year 2010 is closed and NBV of tax depreciation as on 31.12.2010 of one asset is 80000, If I change the start date of tax depreciation from 1.1.2011 then system correcly take NBV of 31.12.2010 for further depreciation calculation. But if i change the start date of depreciation in between of year the system is calculating depreciation based on NBV of 31.12.2010 but ignores the tax depreciation from 1.1.2011 to 30.04.2011, which I previously run using AFAB.
Need your assistance to know is it feasible to do this.
Thanks and Regards,
Harshad

Hi Harshad
The behaviour of the system is very much correct, it is designed to behave that way...
One, you should not have changed the dep start date....
two, NBV in SAP is always taken to be NBV @ the start of the year....
The best wayout I can suggest here is, if you are on EhP4 and EA-FIN active
a. Change the Dep Key in the asset... You can maintain Time Dependant Dep Terms in asset master i.e. Dep Key X from Jan-Apr and Dep Key Y from MAy onwards
b. This will however, calculate dep based on NBV at the start of the year, but based on new useful life
c. Considering your eg: The system is posting more depreciation i.e. 5333 instead of 5155.... So, calculate this amount outside the system and post a Manual Write up ABZU inorder to reduce the Dep and increase the NBV
Even if you are on not on EhP4, you can follow the same approach as above.... i.e.
a. Change the Dep Key in asset master.... This will throw up new dep figure, on the basis of New Useful life and NBV at the start of the year
b. Post a write up from ABZU....
No need to do Asset to asset transfer in my opinion
Only diff between EhP4 and Non EhP4 is that the differential depreciation would be lesser if you are on EhP4... i.e. instead of 5333 now, system may throw up depreciation amount of 5666.. So, you may need to post write up of 5666-5155
br, Ajay M

Similar Messages

Change in start date of tax depreciation not for posting in mid of year

Hi Experts,
Tax depreciation area is not for posting. The fiscal year is from Jan to Dec. I want to calculate tax depreciation from May 2011 based on Net Book Value of tax depreciation as on 30.04.2011. But once I change the start date of tax depreciation in asset master to 01.05.2011, the system ignores the previous depreciation so I am not getting the NBV of tax depreciation of 30.04.2011.
Is any setting is required to get this. I can not do changes in posting rules since this tax depreciation is not for posting any thing.
The fiscal year 2010 is closed and NBV of tax depreciation as on 31.12.2010 of one asset is 80000, If I change the start date of tax depreciation from 1.1.2011 then system correcly take NBV of 31.12.2010 for further depreciation calculation. But if i change the start date of depreciation in between of year the system is calculating depreciation based on NBV of 31.12.2010 but ignores the tax depreciation from 1.1.2011 to 30.04.2011, which I previously run using AFAB.
Need your assistance to know is it feasible to do this.
Thanks and Regards,
Harshad

Hi Harshad
The behaviour of the system is very much correct, it is designed to behave that way...
One, you should not have changed the dep start date....
two, NBV in SAP is always taken to be NBV @ the start of the year....
The best wayout I can suggest here is, if you are on EhP4 and EA-FIN active
a. Change the Dep Key in the asset... You can maintain Time Dependant Dep Terms in asset master i.e. Dep Key X from Jan-Apr and Dep Key Y from MAy onwards
b. This will however, calculate dep based on NBV at the start of the year, but based on new useful life
c. Considering your eg: The system is posting more depreciation i.e. 5333 instead of 5155.... So, calculate this amount outside the system and post a Manual Write up ABZU inorder to reduce the Dep and increase the NBV
Even if you are on not on EhP4, you can follow the same approach as above.... i.e.
a. Change the Dep Key in asset master.... This will throw up new dep figure, on the basis of New Useful life and NBV at the start of the year
b. Post a write up from ABZU....
No need to do Asset to asset transfer in my opinion
Only diff between EhP4 and Non EhP4 is that the differential depreciation would be lesser if you are on EhP4... i.e. instead of 5333 now, system may throw up depreciation amount of 5666.. So, you may need to post write up of 5666-5155
br, Ajay M

How do I change the start date for the week from Monday to Sunday on my iPhone 5?

How do I change the start date for the week on iCal from Monday to Sunday on my iPhone5?

Yes. On my new iPhone 5 the iCal week begins on a Monday not a Sunday and does not give me the option to edit in settings on the phone

Org Management - How can I change the start date of all the org units

How can I change the start date of all the org unit objects and its relationships at one shot ? I have created some 100 Org units with the wrong start date. Please suggest.
Thanks in advance..
Cheers
Vijay

Hello Archana,
Thanks a lot... This has solved my issue...
Cheers
Vijay

Unable to Change Project Start Date in Project Server 2013

Dear All,
I have created new EPT in Project Server 2013. After that, when i am creating any new project in PWA 2013 by using newly created EPT, then i am not able to change Date as per my requirement.
Basically, EPT created on 02/18/2015 & even though i am changing Project start date then its again showing same date (02/18/2015)
Kindly suggest what i can do.

Hello,
Does this new EPT have a project plan template associated? What happens if you set the EPT not to have a plan template then create a new project from this EPT? Does that let you update the start date? The start date should default to today (date the project
plan was created). If that works as expected, add the plan template back to the EPT (if you had one to start with) and test creating another project to see if that then works or you then get the same behaviour. This will point us to the cause hopefully.
Do other EPTs work as expected?
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

Need to change to starting dates of employees

Hi All,
I need to change the starting dates of two employees from apr-2012 to apr 2008, now if i end date the employee, how can i change the dates
Regards,
Sajid

If I understand your goal, you may change the latest start date. You must be in the earliest person record to do this, but you can enter a new date in that field and save. It will change the accompanying assignment and salary records. However, if you do this any data on the records will have to exist as of the earlier start date. Work structures, for example, have to be dated early enough to accomodate this. If you are using Benefits and life events they will have to be reprocessed. There may be other things connected to the person record and hire date that have to be considered before doing this.

Workflow Tasks spontaenously changed their start date without user input.

The issue I have is that a task list with a workflow attached to it spontaneously added major versions to over 200 items that changed the 'start' and 'end' dates. The user's name who was tagged as the one doing the update was not using sharepoint or even
at his computer for the time that this occurred.
Not all of the tasks in this list were affected and I can't find a pattern as to why -
I have seen this happen before at a different agency/installation where a user's name appeared suddenly on fresh updates a year and a half after he retired and was removed from the system.
Any ideas as to what might have happened?
Any suggestions on how to revert over 200+ task items to their previous version programmatically without having to edit each individual one?

Hi,
As I understand, you want to know why the task will change the start date spontaneously and how to revert your 200+ task list items version.
How do you remove the user from the SharePoint 2013? And what permissions did the users have before you removed them?
Check if there is a rule that will change the start date spontaneously in the workflow attached with your task list, or if there is customer code or solution that will change the start date spontaneously.
If you want to revert the version of your task list items, you can achieve it by PowerShell script.
The article below is about how to restore versions by PowerShell script.
https://gallery.technet.microsoft.com/office/Restore-and-clean-up-f3c712fd
Best regards
Sara Fan
TechNet Community Support

After Changing the start date for a task in a project we are not able to save

Hi
When we are updating the task start date of a particular task the below message is poping up in Project Professional and when we trying to update in Pwa and saving it automatically the save is becoming undone.
We are logging in with that user credentials and checking where the user has not charged any actuals on that task.
Then a message pops up saying:
"The actual work in "xxxx" is out of sync with the actual work updated from timesheets. Actual work can only be updated by team members through PWA. Changes you have made to users' actual work will be lost during the save."
Can any body throw some light on the above issue.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

It seems you have enabled the option in server setting >> task Settings and Display >> Protect User Updates>> for restricting updates to PWA only ? this is one cause when this error message appears when the update restriction is to PWA
and PM tries to modify the Plan, the only exception to this is milestones which can be updated via Proj pro,
this being the case becomes a conflict when you say updates can be done only via PWA and try to overwrite the actual via MSP
kirtesh

How to track changes in Start date

Hello Everyone,
Currently I am facing a new issue (requirement from management) that they want to track the activity start date change and generate a trend report on that so we cna display it to client that this many activities changed this times.
To give you the overview, currently we are working on Asset Renewal project where there is no fix scope it comes as per priority. And unfortunately priorities get changed as well.
So as an example originally we may have planned a particular activity on 04/08/14 acording to priority and then we get the new date and plan it again for 20/07/14 then we get our possession request knocked back and replan it to 20/08/14 then we encounter a problem from supplier and we replan it to 25/08/14. So this is just a scenario I have given but it changes say atleast 10 time before it gets executed.
So I know traditional way in primavera to capture the change is maintain baselines but that would not be applicable in my case as I have hundreds of sites in 1 program and they change as i explained above so is there any way I can track that changes in primavera or any other way available. i am really open for all suggestion including new softwares or exporting to Microsoft Excel.
I have tried my best to explain this situation but if you require any further info please let me know.
Thanks in advance
Nirav

Pl take a look at the Std Report RPUAUD00 used for Infotype Logging. The Report Documnentation details the steps needed to turn the logging for the PA infotypes, which in your case could be 0167,0168,0169 etc..
~Suresh

Work Order Basic Start Date and Basic Finish Date to be changed

Hi,
Currently the business creates work orders without specifying the work resulting which the start and fish dates on work order are same. Also we have automatic scheduling turned off. In spite of this If I am trying to manual modify the basic start and basic finish dates on work order it does not allow me to do so. This issue is seen with work orders which are Released whereas orders with status outstanding have no issues. Could anyone please let me know what could be the reason?
Thanks,
Vinay

Please check whether Scheduling type only capacity requirement is configured.
If yes, choose this scheduling type in order, you can able to change Basic start date & basic finish date.

CRM-ISU: Need to change the END date and Start Date for contract items

Hi,
There is an old contract item for which I need to change the end date
and there is a new contract item for which I need to change the start date.
I need to change the contract item end date and start date using some function module in IS-U system (may be as RFC to CRM).Pleaselet me know if any body is ware of this functionality?
I am aware of a FM EECRM_CONTRACT_DATE_CHANGE which may be used for changing End Date
but how to change the start date of a new contract item?
Please let me know if any body is aware of this?
Thanks

Hi,
Hope you can solve it by this [Link1|Re: Function modules; [link2|CRM material;.
Regards,
Surjith

How to change both start and end dates for an business event (or any object

Hi all.
We are in the case to change the validity dates for several business events in training management.
The special point is that both, start and end date, have to be changed.
In example, business event 00000001 is valid from 2010.01.01 to 2010.01.31 and shoud be "moved" from 2010.05.01 to 2010.05.31.
So if i run RHBEGDA0 report to change start date first, it doesn't work propperly because new start date is bigger than old enddate.
Next thing we thought is to change end date first, using RHGRENZ1, and then change the start date, with the report RHBEGDA0. Problem with this solution is that a business event duration shoud be calculated taking care of free days (weekends and day ofs).
Is there any better solution for this?
Thanks in advance for your help.
Best regards.

Hi,
I gueass the best solution is to use PV1A t-code.
You can write an LSMW for this t-code if the number of business events to be maintained is huge.
Regards,
Dilek

Change start date of an object..

hello guru's,
i was wondering if the start date for objects like org unit or possition or job can be changed or we can only delimit or delete it...and if the start date can be changed then how can we do it...

Hi friend
You can change the start date of an object using program RHBEGDA0.
Award points if the answer was helpful.
Regards
Santhosh.S

Change start date completion check CAT2

Hi all
Can someone tell me how I can change the start date for the completion check in CATS.
When we do the completion check it checks also weeks of last year. We want to completion check from 1-1-2009 till now.
Kind Regards,
Richard

Hello, see http://project-server-optimization.blogspot.co.uk/2008/04/change-project-start-date-once-its.html & http://project-server-optimization.blogspot.co.uk/2008/04/create-new-project-from-template.html. Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Define start date in SNP interactive table of planned order

hi,
does anyone know how to control the start date and the scheduling of planned order created in the SNP interactive table?

Hi Arieh,
For SNP Pl.Order the standard SAP APO behavior is to control the availability date (End date).
To control Start date you have to convert SNP Pl.Order in PP/DS Pl.Order. Then in the PPT1, production periodic view you can change by start date if you change the strategy to Forwards.
Regards, Marius

Change in start date of tax depreciation in mid of year

Similar Messages

Maybe you are looking for