Change output after PO created

Hi
We are having problems changing the output device after that the PO has been created and sent to supplier. We have email as default and want to change to Printer after creating. But we get the message "Purchase order has not been changed"
But when changing e.g. the date and also the output device everything gets changed.
Any ideas?
Sincerely
Anders

According to SAP this is standard behavior

Similar Messages

  • Issue when changing a PO: it creates a new output record automatically

    Hello,
    The goal is to prevent that a new output record is automatically attached to a purchase order after a change has occurred.
    Current situation:
    Create a PO for holding and an output record is created for output type ZHP1.
    Release PO.
    Print the PO in ME9F.
    Change the condition record in MN05 and change the language of the print to a different language than the one of the supplier.
    Change the PO by adding some header text, the system adds a second output on the purchase order in the language of the cond record.
    This should not happen.
    Any idea how to achieve this goal rather via customizing than new implementation/changing the SAP standard code!
    Thank you in advance.
    Aydin

    Hi, I'm working with Aydin on this issue.
    It creates the second message on the PO and if processed via ME9F then it prints.
    But we dont want even that the second output gets created.
    We do not work with version management so changes to PO do not create second message.
    This second message comes up because language code has been changed in MN05 (one time change) after the first print.
    System sees that first message on PO is with language A and now condition record is with lang B.
    So If I change any little thing on the PO just to trigger message redetermination, it attaches a second output in the lang B. 
    If I dont change language code in MN05 and I still do my little change on PO, then it does not attach a second output message (which is good for us)
    I thought the only way out is to write a requirement program that would check that if a message already exists on the PO for that output type then dont create a second one. What do you think?
    Marc
    Edited by: mmlafe on Jan 3, 2012 5:02 PM

  • PO change output not triggered after deletion of line item

    Hello SAP experts,
    I have one issue with PO output
    I have created PO with output type & we are outputing through ME9F( 3- Send with application own transaction)
    Below is the sequence,
    1.PO created & outputed thru ME9F
    2.Now ,i added the line item in the PO,Output triggred but not processed.
    3.I deleted the line item immedietely,Output not triggered.
    (My question is Why the output is not tiggered?)
    4.I outputed it through ME9F,vendor will receive only 1st output & never get the 2nd o/p for the deletion of item.
    I am clear that after processsing the 1st output,then only i can process the 2nd.
    But in business point of view,this scene created the problem.
    Please provide your valuable input.

    Hi,
    In IMG - Materials Management- Purchasing-Messages - Fields relevant to Print out of changes
    Enter Table EKPO , Reference Field LOEKZ, tick on change print relevant for purchase order,in routine enter 03.
    Now your Output will be triggered with a change indicator and you can process it using ME9F.
    Regards
    Chandra Shekhar

  • Price has been changed in sales order after invoice created

    Hi,
    We have a scenario where there has been a change in sales order prices after invoice created. when user try to pull out a report for incomplete sales orders through V.02 and these orders populating in (incompletion log is showing for Customer Expected price).
    when I looked into the changes for those sales orders, there is FI job which did all those changes and it is difficult to find the details of what the job does.
    Please suggest me the work around how should I remove these sales orders from incompletion log.
    Thanks
    Anuja

    Hi. Anuja. has accounting document generated.? Because once the accounting document generates there no fields we can change apart from output types. I think in your scenario there are no accounting documents generated. may be , because of that reason The pricing has changed after the invoice. In order to solve this , in billing type uncheck posting block check box......
    I Think it might helpful.
    regards, ADITHYA

  • How to change shape properties after having created one?

    Photoshop CC 2014 -- latest update as of October 06, 2014
    Windows 7
    How can I change a shapes properties after having created one.
    I have created a simple ellipse.
    When I drew the ellipse with the tool, I had the option for the fill color/style and stroke, etc.
    After I have created said ellipse, I wish to change its properties.
    I can use the Paint Bucket, gradient tool, etc for the fill, but is there way to get back to the original set of tools with which I created the ellipse in the first place?
    If I use Edit > Stroke... it adds a new stroke around the existing shape.
    If I use Edit > Fill... the entire layer is filled.
    There must surely be a way to reenter the tool set to edit an existing shape. No?
    Thanks,

    Hi everyone,
    Thanks for the helpful tips, advice, etc.
    I didn't explain myself very well--I apologize.
    However, with your tips I figured it out:
    When I create a rectangle or ellipse, I can later click on its layer and the Properties window appears with options to change their "Live Shape Properties."
    However, not so with the Polygon and Shape tools. With them, the Properties window shows only the Masks, but the Toolbar still shows some basic properties I can change.
    I was stymied by the above differences while working only on a Shape.
    I've attached two JPEG screenshots.
    I didn't need to change the actual shape, just the fill/stroke, etc.
    Later, I may wish to change the actual shape, but that appears to be done by simply creating something new.
    Thanks much!!

  • How do i change my email id to be synced with i cloud.i basically changed over from yahoo to gmail after i created my apple id?

    how do i change my email id to be synced with i cloud.i basically changed over from yahoo to gmail after i created my apple id?

    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
    If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

  • Create a user through the API and "Prompt user to change password after next login".

    Using the Adobe Connect Interface, I can create a user and check the checkbox to "Prompt user to change password after next login".
    Can I achieve the same result using the API? The principal-update action doesn't offer such an option and, as far as I can tell, there isn't another action to do so either.
    Thank you.

    You can achieve it as part of your application functionality, but not as a configuration option on WLS.

  • I've bought my 1st Mac, since than I've replaced my old disk to a new one - and at the lab they created my new admin's name as admin.. I've changed it after 'root'ing - and now I can't find my photos either at iPhoto/photo booth,what can I do to restore ?

    I've bought my 1st Mac, since than I've replaced my old disk to a new one - and at the lab they created my new admin's name as admin.. I've changed it after 'root'ing - and now I can't find my photos either at iPhoto/photo booth, what can I do to restore restore them, they are very importent to me !!!
    Please I'll be thankfull.

    I stated that I did try to do all of this when I first set up the new computer...I did do the Setup Assistant numerous times but my old computer kept freezing half way through.  Even if I did it when I first got the new computer back in Septemeber, I would have had the same issue b/c my old computer has been 'broken' for a while.  My old computer can't handle doing too much at once and I think the setup and then migration functions I tried were too much.  That's why I was hoping I could use the migration function piecemeal.  I wish I could just check off the exact files and folders I want vs. having to choose it at the 'user' level...that's too much for my old computer to have to transfer.

  • PR can be changed after PO created from the PR(by adopting) .. need to stop

    Dear experts,
    In our current system PR can be changed after PO created by adopting the PR. How can i block this change.
    Kindly help
    Regards,
    Zusen

    Badruddoza Zusen wrote:
    Hi
    >
    > Thank you for your reply.
    >
    > I have set message 06608 as error but problem still is there. After creating a PO 4500013405 w.r.t a PR 100018999 and can add new line in PR 100018999. How can i stop this..
    >
    > Kindly help.
    >
    > Thanks and regards,
    > Zusen
    Is that really a problem?  the second item has has the same PR number. but if you look at the technical structure of the purchase requisition table, then this table does not have a header table and no item table, it is just one table --> EBAN
    if you create a second item, then you have the same PR number but different item number
    otherwise
    you have a different PR number but same item number.
    It is really just one field which is different.
    And 06608 message prevents the change of the item which is already used in a PO.

  • Partner function copied from PO to Outb.del. but output message not created

    Hello Gurus,
    As the copy of the partner function from the PO to the Outbound Delivery is not supported in standard, I have activated userexit_save_document_prepare (MV50AFZ1) where I can add the other partner roles out of the purchase order into table XVBPA (VN). Thanks to this exit, the partner function VN is correctly added in the Outbound Delivery.
    My issue is the following this partner function should create an output message using the partner function VN but this one is not created during the Outbound delivery creation. But if I go to the VL02N and just save the Outbound delivery again (without change) now the output is correctly created and processed.
    Does someone of you know the reason why the output message for partner VN is not triggered at the Delivery Creation but
    after the manual save?
    Kind regards
    Chris

    I have just explained this in Copy partner from PO to inbound delivery

  • Change PO after it is released .

    Requirement : Allow user to change PO after it is released / Ordered .
                           If goods receipt / COnfirmation has happened ; I need to disable a check in R/3 and Allow users to still edit POs.
    I heard in Extended Classic scenarion in SRM 7.0 , it is possible to change PO even after it is released .
    Anybody knoews how ?
    Regards ,
    Ambar

    Hi Ambar,
    Yes its possible and very much standard in SRM.
    In SRM extended classic scenarion you can modify PO in SRm after it is ordered. it will create a change version  provided versioning is active and  based on workflow  for PO Change the workflow would get triggered. once approved  a higher verison  of PO would be active and change version will get closed. the change PO will then output to vendor as well as transferred to  ECC system.
    for PO version active the  SPRO path is as below:
    SPRO->IMG->supplier relationship managemnet -> SRM server-> Cross application basic settings ->Switch on version control for purchaisng document.
    Make sure you have entry for business object BUS2201 as active.
    Thanks
    Iftekhar Alam

  • Why CreateNewFrame() returns as NULL after successful created 136 child frame window and trying to create 137th child frame window in MDI application

    I am working on MDI application which was developed in VC++ in VS 2012. When my application is launched, it will display a Tree. Under a tree there are 254 nodes. Basically
    these nodes data are read from Configuration xml file and loaded into the Tree. By double clicking on each node, first it will create object for document class ( By calling CreateNewDocument() method) after that member variables for that
    document class will be initialized and then it will create the new frame window (by calling
    CreateNewFrame(pDoc,NULL). New child frame window will show under Main window to the user.
    User able to see the data from child frame window.
    Similarly by double clicking on each node it will create another object for the same document class and new child frame window will be opened for that node. Each child frame window runs
    in different data and showed under the Main window.
    Existing requirement by double clicking on each node, node data shall show in separate child window and there is no requirement for all 254 child windows opened simultaneously.
    But current requirement is , all 254 child windows shall open simultaneously by double clicking on each node one by one.
    In debug mode I have tried double clicking on each node. I able to open up to 50 nodes. After 50th child windows are opened, I unable to access to the application
    (Unable to open further node data window since application is getting hanged).
    Each child window is having tree, multiple splitter window and some additional controls (static text, ...).
    Same I have tried in release mode, I able to open up to 136 child windows. After that the application fail to create the new frame window in VS 2012. i.e CreateNewFrame() return
    NULL after successful created 136 child frame window. Debug purpose I have added the code to retrieve last error code by calling GetLastError() method. I got the value as "0". By closing any existing child window then I able to open remaining nodes.
    At any point of time I can reach maximum of 136 child frame window that can be opened under Main window. Failing to open all 254 child frame window
    simultaneously,  currently I fail to meet the current requirement.
    current Requirement is all 254 child frame window are opened simultaneously. Please let me know what may be the reason fail to create new frame window after 136 frame window that are
    opened already. In Microsoft site, mentioned that there is no limitation for creating frame  window in MDI application. I have tried another sample MDI application having limited number of controls, in which I able to create "n"
    number of child frame windows. why not able to create more than 136 child frame window in my actual application?
    Is there any possibility by changing project settings allow me to create 254 child frame window??
    Code Snippet as below:
    CDiagBaseDoc * CDiagBaseMDocTemplate::OpenDiagView( ...)
         CDiagBaseDoc* pDoc = NULL;
        if (pDoc == NULL)
            pDoc = (CDiagBaseDoc*)CreateNewDocument();
        if ( pDoc )
           CFrameWnd* pFrame = NULL;
           if (bAlreadyOpen)
                  // If Child frame window already opened, then handling the code here.
         else
               pFrame = CreateNewFrame(pDoc, NULL);
               if (pFrame == NULL)
                  ASSERT(FALSE);
                  delete pDoc;       // explicit delete on error
                 pDoc = NULL;
              ASSERT_VALID(pFrame);
              if( pDoc != NULL ) //VS2012
                 if ( !pDoc->OnNewDocument() )
                    TRACE0("CDocument::OnNewDocument returned FALSE\n");
                    delete pDoc;       // explicit delete on error
                    pDoc = NULL;
                    pFrame->DestroyWindow();
                     pFrame = NULL;
           if (pFrame)
               InitialUpdateFrame(pFrame, pDoc);
               ShowWindow( pFrame->GetSafeHwnd(), SW_MAXIMIZE ); //when opening node for the 1st time, maximize it
    }<o:p></o:p>

    Hi MuruganK,
    Have you checked how much memory your application used? You could check it by Task Manager. Maybe your application reach Memory Limits for Windows.
    https://msdn.microsoft.com/en-us/library/windows/desktop/aa366778%28v=vs.85%29.aspx?f=255&MSPPError=-2147217396
    Is it possible that there are some memory leaks in your application? It would better if you have made a simple sample to reproduce and narrow down this issue.
    Best regards,
    Shu
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • PO output issue. Create request is missing .

    Hi SRM gurus,
    We are  using SRM 4.0 with extended classic  with EBP SUS  scanario.
    There are some failures in XI  for  change PO request. The error  is as below :
    An error occured within an XI interface: Exception occurredA:BBP_PD:007 -No data found A:BBP_PD:017 -The document does not exist. Check entries E:BBP_PD:044 -Object 00000000000000000000000000000001 does not exist Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57.
    I have following questions :
    1) Original PO does not exists in SUS. Where I can see output option, user selected during  original PO creation ?
    Is there any standard table where I can see output options  during all PO versions. ( in version section it is  not displaying  output option for  earlier  versions.
    2)   is it possible to post change request before creating  create request ? if yes what to be done ?
    3)  How to replicate this PO to SUS. Do new PO is required to be created and existing PO's are required to  be shortclosed ?
    Kindly reply.  Thanks in advance.
    Regards,
    Sachin

    Murugan,
    1. For the client's user id, the PO output is not showing the company code data in the PO output form. But when we are trying to see the same thing in production in ME23N (we don't have access to make changes in production), we are getting the correct PO form that shows the company code address also.
    2. The company code 3278 and output types were created at the same time and moved to production.

  • Management Studio 2008 does not refresh after table create / alter

    hello
    Management Studio 2008 does not refresh after table create / alter, why?
    f5 / refresh button does not work in "Object Explorer".... i always need the restart the whole application to see any changes, this is strange...
    regards, jan

    Hi jm,
    I’m writing to follow up with you on this post. Was the problem resolved after performing Vishal ‘s steps? If you are satisfied with our solution, I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings
    or concerns you may have.
    Thanks,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Locking PDF but only allow further signatures & get the list of of changes made after signing

    Hi,
    I have looked at Adobe Acrobat 9.0 and found the Signing > locking feature which blocks any changes after the document is signed. I need to know whether using Acrobat SDK, one could implement a similar locking option via plugin in a way that it ONLY allows further blank signature fields to be created or sign existing ones and locks all other changes. If possible, any pointers to API functions would be appreciated.
    If the above is not possible using Acrobat SDK 9.0 then can the SDK provides a list of all the set of changes made after the signing is performed (at the time of verification) in the form of some codes which can guide the plugin author about what change after signing was done e.g.
    a blank signature field was signed
    a blank signature field is created
    watermark has been applied
    form is filled
    sticky notes/stamps/other annotations are added
    Regards,
    mwak

    Thanks for your response. I have just performed this:
    I signed a PDF ( having no prior signature or blank signature fields ) using Adobe Acrobat 9.0 and locked it. I am now not able to create more signatures on this PDF. I believe I can't add more signatures even using the Acrobat SDK and Lock means complete lock-down of the document. This is different to what you said " it restricts modifications EXCEPT for other signings" or may be I am not understanding it clearly.
    I created two blank signature fields. When I clicked on the first, there is no Lock settings at the time of signing. I believe because If it is locked then the next signature can't be signed. With only a single signature field present, the lock feature is there.
    So I believe I have to resort to the option of identifying the changes in a revision and then if it the change is related to say adding stamps, sticky notes prompts the user at the time of verification.
    Can some one point me to the API functions set which identify list the objects which have changed after signing.
    Regards,
    mwak

Maybe you are looking for