Change sender of XI alert

hi experts,
I would like to ask if it's possible to change the sender of the alert email configured in alrtcatdef. The email sender says "Runtime Workbench Service User [PIRWBUSER@xxxxx]" but when I reply to the alert, the recipient of the email is an inactive account.

Hi.
Please check the below thread.
Sender definition of XI alerts (via mail)
Regards.
Luis

Similar Messages

HP LaserJet M3027 MFP Getting 'Mailbox full' on test send of email alert

I am trying to get my network printers to send email alerts to an external hosted Exchange server through our local win2k3 server, which is not running Exchange but is running an SMTP server. I keep getting a 'Mailbox full' message when trying to send a test alert.
My question is: Do I have to set up an account ON the printer in User Management to be able to send alerts? Currently, there are no users defined on the printers as everybody uses them strictly for network printing. The error is probably something in the SMTP or user configurations on the server but I thought I would ask about the printer user settings just to be sure.

There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

Time and sender specific email alerts

I am on call for a security comapny 24/7 and occasionally receive work at 2am. This comes in the form of an email but rarely wakes me. Is there a way to keep the phone on silent but get audible, sender specific email alerts.
By sender specific I mean i get these important emails from one person
Is there an app available that can monitor my emails and if one comes from the specific address, override the silenced phone and alert me till I respond
If it makes a difference, godaddy hosts my email which is forwarded to my apple mail on my phone

You could use email VIP which will group them together
But no there is nothing native other than changing the sound to all emails to something louder
Or if it's a separate email account manually disabling automatic retrieving of emails on the none security email
Address and leave them on manual retrieve
Depending on your email provider you might be able to automatically forward security emails to another email address
Which you could have on automatic retrieve every xx minutes or push if the mail service supports it
And any other email accounts on manual retrieve
You could suggests do not disturb email feature to Apple
You can enable the led to flash on alerts, but that's for everything
With Calls you can schedule what time and who can call from settings do not disturb

Need to send a email alert to Projectmanger when publishing a project in project server 2010 PWA site

Hi All
When creating and publishing a project in PWA(server 2010) need to send a mail alert to the concerned project manager.
How can i achieve this..
I have configured the outgoing mail sending in sharepoint and its working fine now.
Please help me..
Thanks Advance
SharePoint Module Lead Assyst International Private Ltd Cochin India

Nothing is built in Project Server to do this for you automatically.
They way I have done this in the past is to create a SQL job using SSIS. It runs every hour and when it sees a project schedule that has a recent PUBLISHED date then this is a trigger to send an email to project manager.
Cheers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

How to change Sender mail addres in sapconnect.

Hi,
I have searched this and i have found a thread, but i cant see it because when i click the link, giving a message "No message Found". Can you open this thread?
https://forums.sdn.sap.com/click.jspa?searchID=738174&messageID=1287908
Anyway, is it possible to change sender address when i am sending mail with FM SO_NEW_DOCUMENT_SEND_API1 ? How ?
I looked at fields of structures, but i haven't found a field to change sender addres.
Thanks
Ibrahim

Hi Ibrahim,
i can't also use the Link.
I use for sending this FM:
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = DOC_DATA
            PUT_IN_OUTBOX              = 'X'
            COMMIT_WORK                = 'X'
           SENDER_ADDRESS             = 'SAP_USER' "Your SAP User
           SENDER_ADDRESS_TYPE        = 'U'
       TABLES
            PACKING_LIST               = OBJ_PACK
            CONTENTS_TXT               = OBJ_TXT
            CONTENTS_BIN               = OBJ_BIN
            RECEIVERS                  = REC_LIST
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            DOCUMENT_TYPE_NOT_EXIST    = 3
            OPERATION_NO_AUTHORIZATION = 4
            PARAMETER_ERROR            = 5
            X_ERROR                    = 6
            ENQUEUE_ERROR              = 7
            OTHERS                     = 8.
Perhaps you can use this FM
Regards, Dieter

Script to send a mail alert whenever server boot

hi,
I need a shell or perl script to send a mail alert to user whenever server boot, restart and shutdown.because in my office power problem is there.So the server restarted intermediatly.Kindly any one give a script to rectify my problem.

If the server isat all important and you have a power problem, do consider getting a UPS. It might recover OK most times from power cuts (especially if you're on ZFS), but if you get other power problems like brown-outs and spikes, you might one day regret leaving it connected to a bad mains feed. Choose a mainstream brand like APC to be sure of Solaris support. The line-interactive versions, e.g. SmartUPS will recondition the mains waveform as well as maintaining supply during a power cut.

Change URL of the alert email from content organizer processing

I am receiving email from the content organizer processing timer jobs. I want to have custom url in the email content. can I change it? Please suggest some ideas
Thanks, Saravanan PRS

Hi ,
Thank you for your post.
I reviewed this and there is no OOTB way to change what goes in alert within Content Organizer feature, at least not without writing some code.
Here is a similar thread, you can use as a reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f717a6f3-9558-4c39-9020-f9483b7073d5/how-to-edit-modify-customize-email-notifications-from-content-organizer-drop-off-library?forum=sharepointadminprevious
Best Regards,
Lisa Chen

Change sender e-mail notification

HI.
I implement Service Desk E-Mail Functionality.
How can I change Sender this e-mail notification to constant address (support @ myconpany.com for example)?
At present Sender is the Person who make change in support notification.
Thank you.

Hey,
In order to do that you ll have to do a specific processing method - default method is if i remember well CRM_SRVORDER_EXEC_SMART_FORM of class CL_DOC_PROCESSING_CRM_ORDER
So you ll have to copy class (takes time and energy from solman) and create your specific method that you ll replace in sppfcadm transaction.
In this method instead of using received parameter IS_MAIL_SENDER; create your own one for example
// data ls_mail_sender type SWOTOBJID.
assign the sender that you want to it, for example: support @ myconpany.com
don t forget to replace is_mail_sender by ls_mail_sernder when calling module function
//* call function to process smart form (new forms)
// CALL FUNCTION function_name
that should be fine
Good luck
Khalil

How to change sender's name in FM SO_NEW_DOCUMENT_ATT_SEND_API1

Hi Friends ,
I am using FM "SO_NEW_DOCUMENT_ATT_SEND_API1"
I want to change sender's name in this Fm. Actully when i am using this FM , in place of sender my name is goign but i want to send system name.
Please help in this.
point will be assign,

Hi,
Have a look on the following code,it sends an email with attachment to the SAP inbox
Internal Table declarations
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
w_objhead TYPE soli_tab,
w_ctrlop TYPE ssfctrlop,
w_compop TYPE ssfcompop,
w_return TYPE ssfcrescl,
w_doc_chng typE sodocchgi1,
w_data TYPE sodocchgi1,
w_buffer TYPE string,"To convert from 132 to 255
Variables declarations
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
v_len_out LIKE sood-objlen,
v_len_outn TYPE i,
v_lines_txt TYPE i,
v_lines_bin TYPE i.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZCS_FORM6'
importing
fm_name = v_form_name
exceptions
no_form = 1
no_function_module = 2
others = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
user_settings = 'X'
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_otf[] = w_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Convert PDF from 132 to 255.
LOOP AT i_tline.
Replacing space by ~
TRANSLATE i_tline USING '~'.
CONCATENATE w_buffer i_tline INTO w_buffer.
ENDLOOP.
Replacing ~ by space
TRANSLATE w_buffer USING '~'.
DO.
i_record = w_buffer.
Appending 255 characters as a record
APPEND i_record.
SHIFT w_buffer LEFT BY 255 PLACES.
IF w_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Refresh: i_reclist,
i_objtxt,
i_objbin,
i_objpack.
clear w_objhead.
Object with PDF.
i_objbin[] = i_record[].
DESCRIBE TABLE i_objbin LINES v_lines_bin.
Object with main text of the mail.
i_objtxt = 'Find attached the output of the smart form.'.
APPEND i_objtxt.
i_objtxt = 'Regards,'.
APPEND i_objtxt.
i_objtxt = 'Chandu Valluri'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
Document information.
w_doc_chng-obj_name = 'Smartform'.
w_doc_chng-expiry_dat = sy-datum + 10.
w_doc_chng-obj_descr = 'Smart form output'.
w_doc_chng-sensitivty = 'F'. "Functional object
w_doc_chng-doc_size = v_lines_txt * 255.
Pack to main body as RAW.
Obj. to be transported not in binary form
CLEAR i_objpack-transf_bin.
Start line of object header in transport packet
i_objpack-head_start = 1.
Number of lines of an object header in object packet
i_objpack-head_num = 0.
Start line of object contents in an object packet
i_objpack-body_start = 1.
Number of lines of the object contents in an object packet
i_objpack-body_num = v_lines_txt.
Code for document class
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
Packing as PDF.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'Smartform'.
CONCATENATE 'Smartform_output' '.pdf'
INTO i_objpack-obj_descr.
i_objpack-doc_size = v_lines_bin * 255.
APPEND i_objpack.
Document information.
CLEAR i_reclist.
e-mail receivers.
i_reclist-receiver = sy-uname.
i_reclist-express = 'X'.
i_reclist-rec_type = 'B'. "SAP User
APPEND i_reclist.
Sending mail.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = w_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = w_objhead
contents_bin = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
write:/ 'This is successful'.
*MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward,if useful.
Thanks,
Chandu

Sending email and alert notifcation using function module

Hi All,
I am trying to send email and alert notification messages using function modules in CRM. I am unable to send mail using 'SO_DOCUMENT_SEND_API1'. Getting a short dump message "dictionary mismatch". If anyone knows any FM which can be used for sending mails, please let me know. I also want to send alert messages using some FM. Please let me know any FM in this case as well.
All help appreciated. This is urgent and please get back to me soon.
Thanks
Deno

Hi Ranjit,
Thanks a lot for the reply. I already tried these FMs and getting the error message
Trigger Location of Runtime Error
    Program                                 SAPLBUPA_INTERFACE_TDTRANS
    Include                                 LBUPA_INTERFACE_TDTRANSTOP
    Row                                     4
I dont know the reason behind the error. The SO_document_send FM is used inside all these FMs. So It wont work.
Thanks
Deno

Mail arbitrarily changes sender or recipient names!!!

I have realized that Mail 4.0 changes sender and/or recipient names on a lot of my emails under SL: if I check the actual email address it is the correct, intended one, but the associated name is taken randomly from address book!!!
I was wondering if anyone has been experiencing similar issues.

Ok, even more info: My actual Address Book is perfectly fine. But if I hit the "Address" button in Mail.app, thats when I get the corrupt/mismatched list of e-mail addresses. This is strange as I would think this list would pull from the same place the actual Address Book application pulls from. Perhaps there is some sort of cache that can be reset or something? Clearing "Previous Recipients" did not work.

Change sender address when use function SO_NEW_DOCUMENT_SEND_API1

The requirement need change the sender address when use function SO_NEW_DOCUMENT_SEND_API1.
for example,the fixed sender is '[email protected]'. how to change the sender address. could you please
provide a instance?

Hi 莫言，
As explained in mail home wiki here, this function module is obsolete and complex to use, please use CL_BCS instead. You can find lots of example there. And it is pretty easy to change sender address using CL_BCS instead.
Best regards,
Jerry

Although I set the on/off switch to ON with "change with buttons," the alerts will not change individually. Any suggestions?

I'm having issues with the alerts volume control.
Although I set the on/off switch in settings to ON with "change with buttons", the alerts volume will not change individually. Any suggestions?

I don't mean to be rude or anything but did you check to see if it's on hold? I had the same problem, I nearly worked myself to tears trying to figure out why it wouldn't turn off! hope you fix you're problem.
P.S.-Maybe you should just let the batery run out till it goes dead, hey, then it will be off right?

Setting Sender for SAP Alert Management

Hi All,
I developed a program that call SALRT_CREATE_API directly to sent an emial alert out. However, there ia not a parameter to set the sender of the alert email.
Can any gurus tell me how to define a sender for the alert email that's processed with the API?
Cheers,

Hello,
These procedures are readily available on help.sap.com , please check the following:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e3/bf3b7a8ccb8040b638ff732c551aeb/frameset.htm
Regards,
Siddhesh

I set up a iMessage account with iphone number, I sign the number again after auto sign out when Wifi disconnected. Will it also send me a alert message at my iPhone ?

I set up a iMessage account with iPhone number, I sign in the number again after wifi disconnected. Will it send me the alert message at my iPhone again?

Did you remove your account information from the other person's iPhone?

Change sender of XI alert

Similar Messages

Maybe you are looking for