Change width of line in 2d line chart

I have created a 2d line chart, and Numbers draws blue lines connecting my datapoints. I would like to change the width of these connecting lines, but can't seem to find anywhere to do so. The only formatting option that seems to affect these lines at all is the "Connection Lines" setting, to set them straight or curved. Can you change the thickness of this line somewhere? Can you change the color?
Clicking on the line itself only selects the data points, like this:
There are no options here for styling the line's width or color.

As soon as I posted this, I discovered the solution. While selecting the data points, you need to select the "Style" tab under the Format sidebar, like so:
Then you can style the connecting lines however you like.

Similar Messages

How do I change the line color in a chart in Numbers on my iPad?

How do I change the line color in a chart in Numbers on my iPad?

Whenever I try to shift+direct select it thinks I want to move the line, so as I shift + direct select and drag my mouse across the line (to highlight it all) it moves a chunk of the line and turns it into a near perpendicular line.
I found the appearance window, it just says "Path" (the color I want it to be that it's not)
"Stroke" 4pt
"Fill" (the color I want it to be that it's not)
"Opacity": Default
And some other buttons. I think I'll try the help line tomorrow, I know I saw a customer service number somewhere and I'm only here because the chat was unavailable. This is only one of my 3 problems with my assignment so I'll search here for answers to the other two. Learning new things is rarely fun.

Any Way to Change Thickness of Connector Lines for all lines of a Chart?

Post Author: ScottL
CA Forum: Charts and Graphs
Hi All,
I am trying to change the thickness of a Chart's Connector Lines for all lines of a chart and cannot find a way to accomplish this. I can go into Report Preview and individually change the thickness one at a time, but what if I do not know how many lines I will have (as in a Line Chart) ? I can't find a way to do this through Crystal Reports XI.
Many thanks in advance!
Scott

I think it's even easier to just match frame the "source file"... put your playhead on the clip you want to speed change in your sequence. Then type optioncmdf. Perform the speed change in the Viewer, then simply cut it in... Might help to put it up above the older, use the double arrow selection tool facing right to move the clips past this change later... pull the upper track speed changed clip down over the old, and viola.
Gotta say though, it's a lot easier to perform the speed change in the Viewer, and edit it all in as you go rather than doing it after you've put the clip in a sequence. (not always possible to determine what the speed change should be maybe, but sure easier.... FCP 7 handles this problem a lot better for sure, and worth the upgrade price if your machine is compatible.
Jerry

Changing width of line making up circle

Where or how can I change the width or weight of the line making up a circle when drawing a shape in a photo?

Charles,
More on the Stroke tool method:
After you make your selection you can add a blank layer and apply the Stroke to that. By doing this the result is "non-destructive"; that is, you can delete the stroke layer and get back to the original picture. Also, since the background is transparent on the stroke layer you can copy it onto other pictures. In this example I selected the camel using the Magnetic Lasso, added the blank layer and did the Stroke. I turned of the visibility of the picture layer so that you can better see the result.
http://www.pixentral.com/show.php?picture=1Kf0XLsRkt9eDVYQ9sz3hhcj53XdFA1

Line chart How can i change the thickness of the graph line ?

Hello guys,
can i change the thickness of the graph line ?
With kinds regards
BlackC

I dunno, but some CSS properties are configurable in CSS as well as code. Others it would seem, can only be set with CSS. If you find a property that does what you are looking for, I suppose you could try using that to determine the code equivalent, if there is one.

Remove grid lines by default in chart view

Hello,
I'm working in version 10.1.3.4.1. I've been trying to remove the grid lines from the default chart view. I've read some posts on here and in the blogs about changing the default chart look, but I haven't seen anything specific to grid lines. I think I need to edit the pcxml files located in .../s_oracle10/popbin. I've been messing with these two files:
- bar.pcxml (this seems to be for horizontal bar charts only)
- column.pcxml (this seems to be for vertical bar charts only)
Within <ValueScale> and <CategoryScale> I tried changing the MajorGrid and MinorGrid parameters to values like 'Disabled' and 'False' but this seemed to have no effect. I also tried changing the color from #eeeee to something else but this also seemed to have no effect at all.
I've replicated whatever changes I've made to the corresponding file in the oc4j directory. I am restarting all services after making my changes. I have been able to get some changes to bar.pcxml and column.pcxml show up in the application. I was able to change the default BarStyle from 'Cylinder' to 'Rectangle' successfully, so I think my process of editing the file, copying it to the corresponding oc4j directory, and then bouncing the services is working.
Can anyone point me in the right direction for getting all of the grid lines to go away by default? So far I've only tried removing them from bar charts, but ultimately I want them off by default on line charts as well.

Are you able to acheive this.?
PCXML script is used for chart rendering, and with that I think you can't demark the Gridlines.
The following Xml file gives the definitions for the chart components including gridlines.
chartviewtemplates.xml
Which inturn refers to the following js for gridlines
i think you have to work on the Js here demark the grid lines by default
<Oracle_BIHome>\web\app\res\b_mozilla\views\chart
dlggridlineseditor.js
Before doing any changes take the backup.
Thanks,
Vino
Edited by: Vinodh NK on Oct 22, 2010 3:44 AM

Plot line, bar and pie chart

Anyone can let me know where can i learn or tutorial on how to plot line, bar and pie chart by using java2D... (no third-party software)....
thanks in advance.

Here's a pie chart app I made for an earlier question:
import java.awt.*;
import java.awt.font.*;
import java.awt.geom.*;
import javax.swing.*;
public class PieChart {
public static void main(String[] args) {
    int[] data = {
      18, 95, 102, 87
    PieCharter pie = new PieCharter();
    pie.enterData(data);
    JFrame f = new JFrame("Pie Chart");
    f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    f.getContentPane().add(pie);
    f.setSize(400,300);
    f.setLocation(300,300);
    f.setVisible(true);
class PieCharter extends JPanel {
int[] data, percents;
int dataTotal;
final int
    PAD = 25,
    R_PAD = 5;
public PieCharter() {
    setBackground(Color.white);
public void paintComponent(Graphics g) {
    super.paintComponent(g);
    Graphics2D g2 = (Graphics2D)g;
    g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
                        RenderingHints.VALUE_ANTIALIAS_ON);
    Font font = new Font("lucida sans unicode", Font.PLAIN, 16);
    g2.setFont(font);
    FontRenderContext frc = g2.getFontRenderContext();
    int width = getWidth();
    int height = getHeight();
    int cx = width/2;
    int cy = height/2;
    int dia = (int)Math.min(width, height) - 2*PAD;
    g2.draw(new Ellipse2D.Double((width - dia)/2, (height - dia)/2, dia, dia));
    // draw zero datum
    double radians = 0;
    int x = cx + (int)((dia/2) * Math.cos(radians));
    int y = cy - (int)((dia/2) * Math.sin(radians));
    g2.draw(new Line2D.Double(cx, cy, x, y));
    String s;
    int dataWidth, dataHeight, deltaR, rXInc, rYInc;
    for(int i = 0; i < data.length; i++) {
      radians += 2*Math.PI * data/dataTotal;
x = cx + (int)((dia/2) * Math.cos(radians));
y = cy - (int)((dia/2) * Math.sin(radians));
g2.draw(new Line2D.Double(cx, cy, x, y));
s = String.valueOf(percents[i]) + "%";
dataWidth = (int)font.getStringBounds(s, frc).getWidth();
dataHeight = (int)font.getLineMetrics(s, frc).getAscent();
deltaR = (int)Math.sqrt(dataWidth*dataWidth + dataHeight*dataHeight)/2 + R_PAD;
rXInc = (int)(deltaR * Math.cos(radians));
rYInc = (int)(deltaR * Math.sin(radians));
x += rXInc;
y -= rYInc;
x -= dataWidth/2;
y += dataHeight/2;
g2.drawString(s, x, y);
s = String.valueOf(data[i]);
dataWidth = (int)font.getStringBounds(s, frc).getWidth();
dataHeight = (int)font.getLineMetrics(s, frc).getAscent();
x = cx + (int)((dia/4) * Math.cos(radians - 2*Math.PI * data[i]/(2*dataTotal)));
y = cy - (int)((dia/4) * Math.sin(radians - 2*Math.PI * data[i]/(2*dataTotal)));
x -= dataWidth/2;
y += dataHeight/2;
g2.drawString(s, x, y);
private void prepareData() {
for(int i = 0; i < data.length; i++)
dataTotal += data[i];
percents = new int[data.length];
int dataPlus = 0;
for(int i = 0; i < data.length; i++) {
dataPlus += data[i];
percents[i] = Math.round(100 * dataPlus/dataTotal);
public void enterData(int[] data) {
this.data = data;
prepareData();
repaint();

Change the color of the outer line of a shape

Hello I'm trying to create a rectangle with a red border and no inside fill. It's only to highlight some text of a bank form.
I know i have to right click the layer and choose blending options and stroke. But I've tried to change the color so many times and no matter what I do, the outer line remains gray and with rounded corners.
I want the corners of the rectangle to be squared, not rounded but I'm having a hard time changing this.
Please help
I'm using Photoshop CS3
thank you
Could anyone please show a picture of where to change the color of the outer line? I've tried everything.

Hi,
With Ps CS3, you'll probably want to define a Layer Style for a Stroke and then use that with the Square Shape Layers.
This is a Stroke of 4 px, 'Centered' (so a very slight corner rounding on the outside edge. 'Inside' will give you square corners for both inside and outside edges). To change the color of the stroke, go to Layer> Layer Style> Stroke and change the color by clicking on the color bar.
regards,
steve

Change the colour of the outer line of a circle

Hello everyone,
I drew up a circle with no fill inside, to show where the location of my highway storm culvert will be.
I changed the thickness of the outer line of my circle shape by creating a stroke effect at layer → blending options → stroke; then I changed the thickness of the line by right clicking in stroke at the layers panel and then choosing "scale effect."
But the problem I have is that the outer line is gray, and I want it to be black.
The outer line was originally red though so I changed my image → mode to grayscale, because I couldn't find a way to change the colour while keeping my image in RGB colour. So I've managed to make the outer line gray by changing the image mode but I still can't change the colour of the outer line to black.
I'm sure there must be other ways of changing the outer line colour without having to change the image mode, but I'm clueless.
Here is my drawing:
The text next to the circle says «Obra de desagüe». That's spanish for "drainage construction site."
You see, I can't change the colour because I have no clue at where the "change colour option" is. I tried going to layer → layer properties, but in there there's only 7 colours to choose from. I chose a random colour, just to see what happens and what truly changed colour was the layer, within the layers panel; not the shape contained within the layer.
So I'm lost here, any help please?
Unfortunately I'm still not an expert in Photoshop just yet.
Thank you for reading my post.

Set shape layer opacity 100% Fill 0% to make fill transparent or add an empty layer make a circular selection stroke it black.

How to change the posting date at the line item level in a sales order

how to change the posting date at the line item level in a sales order

Hi,
I believe the POSTING DATE will appear on the accounting document
In the Accounting document, the posting date will be based on the Billing date.
Please let me know if you need any more details
santosh

Can change the price in the PO line item

Hello experts,
I have this Purchase order document where I can change the price in the PO line item(ME22N) where as in the other PO that I have created, changing the price in ME22N is not possible(shaded). They are all the same document type and plant combination. For the PB00 condition type configuration, It is set to D- not possible to process manually.
Please help.

Thanks for your answer. Yes i am aware of that, basically the settings is what the price indicated in the info record and as long it is included in the validty periiod then when you create the PO, that price will be detected by the system. i am clear for that, my issue is why there are some materials that i can change the price in the PO directly while the others are the pricing tab is disabled(cannot change the price)
Settings in the SPRO-MM - PURHASING- CONDITIONS-DEFINE PRICE DETERMINATION PROCESS- DEFINE CONDITION TYPES PB00 is D(NOT POSSIBLE TO PROCESS MANUALLY) but stilll the system is showing some PO's that can be changed the price

How to change the color of circles and lines in Acrobat DC

I'm using the Add Circle and Add Line tools in the Fill & Sign tool set to add markups to a PDF. Is it possible for me to change the color of these tools from the default Black to something else?

Hi kevh,
Currently, there is no way to change the properties for the Add Line and Add Circle tools.
Best,
Sara

Drawing a line straight across a chart

Is there a way to draw a horizontal line straight across a
chart, say a column chart. I want the line to extend all the way
from the y-axis to the far right of the chart.

"LittleMuscle" <[email protected]> wrote in
message
news:g7i93j$dqk$[email protected]..
> Is there a way to draw a horizontal line straight across
a chart, say a
> column chart. I want the line to extend all the way from
the y-axis to
> the far right of the chart.
http://www.quietlyscheming.com/blog/charts/easy-custom-charts/

While editing, my photos stopped changing. Even as the red line moves and music plays, the photo is stuck. How do I fix it?

While editing, muy photos stopped changing. Even as the red line moves and the music plays, the photo is stuck on first frame. How do I fix this?

BDAqua and old comm guy,
thanks so much for the good advice. I used both of these and now the problem has stopped. first I checked the finder crash logs and yes, my finder had been crashing repeatedly.
next I removed the preferences files from the library, rebooted from the CD and ran disk utility to repair preferences. since then my computer has been stable.
there were some preferences that didn't get repaired when I ran disk utility. I am copying them here to refer to later if I need to. I don't understand what these mean to me:
Warning: SUID file "System/Library/Filesystems/AppleShare/afpLoad" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/pppd" has been modified and will not be repaired.
Warning: SUID file "usr/sbin/vpnd" has been modified and will not be repaired.

Why is my MacBook Pro **crashing** changing to a blue screen with lines or distorted screen when I open logic or Ableton Live

Why is my MacBook Pro **crashing** changing to a blue screen with lines or distorted screen when I open logic or Ableton Live. Then I have to restart by long pressing the power button. Can somebody plz help me

What you describe sounds like a hardware issue. Unfortunately, you'll need to get that checked out by Apple. If you have an Apple Store near you, make an appointment with the Genius Bar and take the machine in for evaluation.

I want to downgrade my 2011 mac mini server to mac os x, i want to downgrade my 2011 mac mini server to mac os x i have the disks but the mini willl not reboot the apple changing to a circle with a line please help-

i want to downgrade my 2011 mac mini server to mac os x i have the disks but the mini willl not reboot the apple changing to a circle with a line please help-

bpruse, I may be completely off-track for your issue, but I had a similar situation where I wanted to downgrade a Mac Pro from Server to plain OS X and it would not boot from the OS X install disk.
I was attempting to use a full-install OS X.6.x disc with an earlier SL version than that which originally came installed on the Mac Pro. After two or three hours of fiddling, I figured it out and used the discs that came with the system.
However, I don't know how that would work in your case if this is the mini server-version. I'm sure the disks would only have Server on them. Worse-case scenario, find out which X.6.x the OEM disc is installing and get an OS X disc with a new installer.
HTH.
lnail

Change width of line in 2d line chart

Similar Messages

Maybe you are looking for