Change ZFS root dataset name for root file system

Hi all
A quick one.
I accepted the default ZFS root dataset name for the root file system during Solaris 10 installation.
Can I change it to another name afterward without reinstalling the OS? For example,
zfs rename rpool/ROOT/s10s_u6wos_07b rpool/ROOT/`hostname`
zfs rename rpool/ROOT/s10s_u6wos_07b/var rpool/ROOT/`hostname`/var
Thank you.

Renaming the root pool is not recommended.

Similar Messages

  • Dynamic  File Name for Receiver File Adapter

    Hi All,
    How can we use dynamic name for Receiver file adapter?
    Can anyone help.
    Thanks in Advance
    Chemmanz

    Hi Chemmanz,
    The dynamic filename generation concept is as follows.
    In your filename field. just give a variable with % symbols. (eg: %file% ).
    Now, under the option Variable Name Substitution, you can give how the value has to be created.
    It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
    For the former, your give
    message:interface_name ,etc
    and for the payload part you give,
    Payload: "your element root which u wanna acecss"
    Just check this link out,
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    And read the contents under variable substitution and it will help you understand the concepts better.
    If you have any clarifications, do get back,
    Regards,
    Bhavesh

  • Please choose a different name for the file

    How can I stop this message appearning ?

    By choosing a different name for the file?
    You will need to provide a lot more information. 
    What are you trying to do when you see the message?
    What version of Sqldeveloper are you using?
    What operating system are you running on?

  • How to get the owner name for the file in ftp using abap ?

    Hi folks ,
    How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
    but doest work out me . Helping in this regard highly appreciated ...
    Thanks and regards,
    Swarupa Vanarchi

    Hi
    dont you  have used the os user while calling the FTP_CONNECT FM?
    Hope you are not talking about the user executing the FTP program.
    Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
    May be i am going too far with if and elses here as your question possesses no  clarity.
    Plz elaborate your requirement  before anybody can help.
    Regards
    sateesh

  • How do I change the artist/owner name for my podcast?

    How do I change the artist/owner name for my podcast?
    For eg, a podcast has 'The Ricky Gervais Podcast' and underneath 'Ricky Gervais'. I can't see where to change the latter. I can't change that through our podcast host Libsyn.
    Is it done through iTunes?
    Jack

    You can't change anything in iTunes: all infomation is carried in the feed, in this case in the 'itunes:author' tag. there will certainly be somewhere to enter it but if you can't find it you will need to contacts Libsyn; or quite possible Rob Walch, who works for them and posts here, will see this question.

  • Service for network file system fails to install

    Installation of the File Service and Service for NFS in Windows 2008 R2 server fails. Following are the steps used to perform the install.
    Open Server Manager from Start> All Programs> Administrative Tools> Server Manager.
    Click on the Roles node in the left pane, and then click the
    Add Roles link.
    On the Add Roles Wizard welcome page, click Next to continue.
    From the list of roles to install, select File Services, and click
    Next to continue.
    On the Introduction to File Services page, click Next to continue.
    On the Select Role Services page, keep the File Server box checked and select
    Services for Network File System. Click Next to continue.
    On the Confirmation page, review the settings and click the Install button.
    Click Close when the wizard completes.
    ServerManager Log:
    From the ServerManager.log file under C:/Windows/Logs I can see the below.
    2272: 2013-02-12 16:13:51.479 [CBS]                       IsCacheStillGood: True.
    2272: 2013-02-12 16:14:05.534 [Provider]                  System changed since last refresh: False
    2272: 2013-02-12 16:15:45.816 [InstallationProgressPage]  Loading progress page...
    2272: 2013-02-12 16:15:45.831 [InstallationProgressPage]  Begining Sync operation...
    2272: 2013-02-12 16:15:45.842 [Sync]                     
    Sync Graph of changed nodes
    ==========
    name     : File Services
    state    : Changed
    rank     : 1
    sync tech: CBS
    guest[1] : File Server
    guest[2] : Distributed File System
    guest[3] : File Server Resource Manager
    guest[4] : Services for Network File System
    guest[5] : Single Instance Storage
    guest[6] : Windows Search Service
    guest[7] : Windows Server 2003 File Services
    guest[8] : BranchCache for network files
    provider : FileServerRoleProvider
    name     : Services for Network File System
    state    : Changed
    rank     : 2
    sync tech: CBS
    provider : FileServerRoleProvider
    name     : File Server
    state    : Changed
    rank     : 2
    sync tech: CBS
    provider : FileServerRoleProvider
    2272: 2013-02-12 16:15:45.842 [Sync]                      Calling sync provider of Services for Network File System ...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Sync:: guest: 'Services for Network File System', guest deleted?: False
    2272: 2013-02-12 16:15:45.843 [FileServer]                Begin installation of 'Services for Network File System'...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
    2272: 2013-02-12 16:15:45.843 [FileServer]                Installation queued for 'Services for Network File System'.
    2272: 2013-02-12 16:15:45.843 [Sync]                      Calling sync provider of File Server ...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Sync:: guest: 'File Server', guest deleted?: False
    2272: 2013-02-12 16:15:45.843 [FileServer]                Begin installation of 'File Server'...
    2272: 2013-02-12 16:15:45.843 [FileServer]                Install: Guest: 'File Server', updateElement: 'CoreFileServer'
    2272: 2013-02-12 16:15:45.843 [FileServer]                Installation queued for 'File Server'.
    2272: 2013-02-12 16:15:45.844 [CBS]                       installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure
    NFS-Administration ServerForNFS-Infrastructure CoreFileServer ' ...
    2272: 2013-02-12 16:15:46.315 [CBS]                       ...parents that will be auto-installed: '<none>'
    2272: 2013-02-12 16:15:46.316 [CBS]                       ...default children to turn-off: '<none>'
    2272: 2013-02-12 16:15:46.325 [CBS]                       ...current state of 'ServicesForNFS-ServerAndClient': p:
    Staged, a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.325 [CBS]                       ...setting state of 'ServicesForNFS-ServerAndClient' to
    'InstallRequested'
    2272: 2013-02-12 16:15:46.335 [CBS]                       ...current state of 'ClientForNFS-Infrastructure': p: Staged,
    a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.336 [CBS]                       ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.345 [CBS]                       ...current state of 'NFS-Administration': p: Staged, a:
    Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.345 [CBS]                       ...setting state of 'NFS-Administration' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.354 [CBS]                       ...current state of 'ServerForNFS-Infrastructure': p: Staged,
    a: Staged, s: UninstallRequested
    2272: 2013-02-12 16:15:46.354 [CBS]                       ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.363 [CBS]                       ...current state of 'CoreFileServer': p: Staged, a: Staged,
    s: UninstallRequested
    2272: 2013-02-12 16:15:46.363 [CBS]                       ...setting state of 'CoreFileServer' to 'InstallRequested'
    2272: 2013-02-12 16:15:46.373 [CBS]                       ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
    2272: 2013-02-12 16:15:46.390 [CBS]                       ...'ClientForNFS-Infrastructure' : applicability: Applicable
    2272: 2013-02-12 16:15:46.408 [CBS]                       ...'NFS-Administration' : applicability: Applicable
    2272: 2013-02-12 16:15:46.426 [CBS]                       ...'ServerForNFS-Infrastructure' : applicability: Applicable
    2272: 2013-02-12 16:15:46.435 [CBS]                       ...'CoreFileServer' : applicability: Applicable
    2272: 2013-02-12 16:15:46.493 [CbsUIHandler]              Initiate:
    2272: 2013-02-12 16:15:46.494 [InstallationProgressPage]  Installing...
    2272: 2013-02-12 16:15:51.958 [CbsUIHandler]              Error: -2147021879 :
    2272: 2013-02-12 16:15:51.958 [CbsUIHandler]              Terminate:
    2272: 2013-02-12 16:15:52.035 [InstallationProgressPage]  Verifying installation...
    2272: 2013-02-12 16:15:52.049 [CBS]                       ...done installing 'ServicesForNFS-ServerAndClient
    ClientForNFS-Infrastructure NFS-Administration ServerForNFS-Infrastructure CoreFileServer '.
    Status: -2147021879 (80070bc9)
    2272: 2013-02-12 16:15:52.052 [FileServer]                Skipped configuration of 'Services for Network File System' because install operation failed.
    2272: 2013-02-12 16:15:52.053 [FileServer]                Skipped configuration of 'File Server' because install operation failed.
    2272: 2013-02-12 16:15:52.053 [Provider]                 
    [STAT] ---- CBS Session Consolidation -----
    [STAT] For
              'Services for Network File System',
              'File Server'[STAT] installation(s) took '6.2058637' second(s) total.
    [STAT] Configuration(s) took '0.0002143' second(s) total.
    [STAT] Total time: '6.206078' second(s).
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
    is required to roll back changes made
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 255
    2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
    is required to roll back changes made
    2272: 2013-02-12 16:15:52.054 [InstallationProgressPage]  Sync operation completed
    2272: 2013-02-12 16:15:52.054 [InstallationProgressPage]  Performing post install/uninstall discovery...
    2272: 2013-02-12 16:15:52.056 [Provider]                  C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
    2272: 2013-02-12 16:15:52.056 [CBS]                       IsCacheStillGood: False.
    2272: 2013-02-12 16:15:52.526 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
    2272: 2013-02-12 16:15:59.342 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed:
    80070bc9 (-2147021879)
    2272: 2013-02-12 16:15:59.342 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
    2272: 2013-02-12 16:15:59.380 [DISCOVERY]                 hr: -2147021879 -> reboot required.
    2272: 2013-02-12 16:15:59.390 [InstallationProgressPage]  About to load finish page...
    2272: 2013-02-12 16:15:59.390 [InstallationFinishPage]    Loading finish page
    2272: 2013-02-12 16:15:59.401 [InstallationFinishPage]    Finish page loaded
    In Windows Event long I can see the following events logged:
    Event 3002, Port Map:
      Windows(R) failed a request to register RPC Port Mapper on TCP port 111.  RPC Port Mapper cannot start.
      Network File System (NFS) clients use RPC Port Mapper (also known as Portmap and Rpcbind) to discover NFS protocols on remote servers.  Without RPC Port Mapper, Server for NFS
    cannot start and NFS clients cannot access files on this server.
      Verify that no other software is registered on TCP port 111, then start Server for NFS manually (which will also start RPC Port Mapper).
    Event 7000, Service Control Manager:
    The Server for NFS Open RPC (ONCRPC) Portmapper service failed to start due to the following error:
    A device attached to the system is not functioning.
    Event 7001, Service Control Manager:
    The Server for NFS Driver service depends on the Server for NFS Open RPC (ONCRPC) Portmapper service which failed to start because of the following error:
    A device attached to the system is not functioning.
    Event 7001, Service Control Manager:
    The Server for NFS service depends on the Server for NFS Driver service which failed to start because of the following error:
    The dependency service or group failed to start.
    Based on a technet forum I have already checked and made sure there is no other service running on port 111 (command used is netstat -a -b -o).
    Dependent Service Status:
    During the installation process “Client for NFS” seems to have gone well and the service started successfully. But the “Server for NFS” failed, when checked for the status of the dependent process “portmap” service failed to start with the WIN32_EXIT_CODE
    “31 (0x1f)”. Please find below the query result.
    C:\Users\CMMAdmin>sc query rpcxdr
    SERVICE_NAME: rpcxdr
            TYPE               : 1  KERNEL_DRIVER
            STATE              : 4  RUNNING
                                    (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>sc query msnfsflt
    SERVICE_NAME: msnfsflt
            TYPE               : 2  FILE_SYSTEM_DRIVER
            STATE              : 4  RUNNING
                                    (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
            WIN32_EXIT_CODE    : 0  (0x0)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>sc query portmap
    SERVICE_NAME: portmap
            TYPE               : 1  KERNEL_DRIVER
            STATE              : 1  STOPPED
            WIN32_EXIT_CODE    : 31  (0x1f)
            SERVICE_EXIT_CODE  : 0  (0x0)
            CHECKPOINT         : 0x0
            WAIT_HINT          : 0x0
    C:\Users\CMMAdmin>
    As the EXIT CODE is 31 ( A device attached to the system is not functioning), I have checked device manager and made sure there is no yellow warning shown against any hardware device. Further I am not sure how to proceed and debug this issue.
    Please let me know if you have any suggestion on how debug this issue further.
    Thanks
    -Poopesh

    Hey,
    I had this same problem running MS Server 2008 R2 and server log is as follow:
    name     : Services for Network File System
    state    : Changed
    rank     : 2
    sync tech: CBS
    ant.     : empty
    pred.    : File Services
    provider : FileServerRoleProvider
    5676: 2014-01-14 14:08:57.474 [Sync]                      Calling sync provider of Services for Network File System ...
    5676: 2014-01-14 14:08:57.521 [FileServer]                Sync:: guest: 'Services for Network File System', guest deleted?: False
    5676: 2014-01-14 14:08:57.536 [FileServer]                Begin installation of 'Services for Network File System'...
    5676: 2014-01-14 14:08:57.536 [FileServer]                Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
    5676: 2014-01-14 14:08:57.536 [FileServer]                Installation queued for 'Services for Network File System'.
    5676: 2014-01-14 14:08:57.536 [CBS]                       installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
    ServerForNFS-Infrastructure ' ...
    5676: 2014-01-14 14:09:00.173 [CBS]                       ...parents that will be auto-installed: '<none>'
    5676: 2014-01-14 14:09:00.173 [CBS]                       ...default children to turn-off: '<none>'
    5676: 2014-01-14 14:09:00.204 [CBS]                       ...current state of 'ServicesForNFS-ServerAndClient': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.204 [CBS]                       ...setting state of 'ServicesForNFS-ServerAndClient' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.235 [CBS]                       ...current state of 'ClientForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.235 [CBS]                       ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.266 [CBS]                       ...current state of 'NFS-Administration': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.266 [CBS]                       ...setting state of 'NFS-Administration' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.282 [CBS]                       ...current state of 'ServerForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
    5676: 2014-01-14 14:09:00.282 [CBS]                       ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
    5676: 2014-01-14 14:09:00.313 [CBS]                       ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
    5676: 2014-01-14 14:09:00.360 [CBS]                       ...'ClientForNFS-Infrastructure' : applicability: Applicable
    5676: 2014-01-14 14:09:00.422 [CBS]                       ...'NFS-Administration' : applicability: Applicable
    5676: 2014-01-14 14:09:00.469 [CBS]                       ...'ServerForNFS-Infrastructure' : applicability: Applicable
    5676: 2014-01-14 14:09:01.624 [CbsUIHandler]              Initiate:
    5676: 2014-01-14 14:09:01.624 [InstallationProgressPage]  Installing...
    5676: 2014-01-14 14:09:35.117 [CbsUIHandler]              Error: -2147021879 :
    5676: 2014-01-14 14:09:35.117 [CbsUIHandler]              Terminate:
    5676: 2014-01-14 14:09:41.170 [InstallationProgressPage]  Verifying installation...
    5676: 2014-01-14 14:09:41.264 [CBS]                       ...done installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
    ServerForNFS-Infrastructure '. Status: -2147021879 (80070bc9)
    5676: 2014-01-14 14:09:41.279 [FileServer]                Skipped configuration of 'Services for Network File System' because install operation failed.
    5676: 2014-01-14 14:09:41.279 [Provider]                 
    [STAT] ---- CBS Session Consolidation -----
    [STAT] For
              'Services for Network File System'[STAT] installation(s) took '43.7368586' second(s) total.
    [STAT] Configuration(s) took '0.0062843' second(s) total.
    [STAT] Total time: '43.7431429' second(s).
    5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
    5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes
    made
    5676: 2014-01-14 14:09:41.279 [InstallationProgressPage]  Sync operation completed
    5676: 2014-01-14 14:09:41.279 [InstallationProgressPage]  Performing post install/uninstall discovery...
    5676: 2014-01-14 14:09:41.295 [Provider]                  C:\windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
    5676: 2014-01-14 14:09:41.295 [CBS]                       IsCacheStillGood: False.
    5676: 2014-01-14 14:09:43.900 [CBS]                       >>>GetUpdateInfo--------------------------------------------------
    5676: 2014-01-14 14:09:57.394 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
    5676: 2014-01-14 14:09:57.410 [CBS]                       <<<GetUpdateInfo--------------------------------------------------
    5676: 2014-01-14 14:09:57.488 [DISCOVERY]                 hr: -2147021879 -> reboot required.
    5676: 2014-01-14 14:09:57.613 [InstallationProgressPage]  About to load finish page...
    5676: 2014-01-14 14:09:57.628 [InstallationFinishPage]    Loading finish page
    5676: 2014-01-14 14:09:57.644 [InstallationFinishPage]    Finish page loaded
    My solution was to run netstat -ano to identify what process was running on port TCP/UDP :111, then with the command tasklist I got PID matching with the task name. Once identified I stopped the process, rebooted and installed
    the NFS service. On top of that, before installing NFS services I disabled firewall and antivirus. It worked fine for me. I hope this will be usefull for you. By the way, don't forget to enable all process back!
    Have a good one!

  • Plain user and systemd: dependency failed for local file system

    I tried to switch to systemd, but ended up in a maintenance console (Enter root password or Ctrl-D to continue):
    Enter password.
    journalctl -b as suggested yields "Dependency failed for local file system".
    I couldn't find a systemd troubleshooting page in the Wiki. So, can someone point me to such a page? Anyone willing to give some hints?
    What I did so far: Did what https://wiki.archlinux.org/index.php/Systemd tells one should do to switch to systemd.
    In the boot menu pressed e, moved one down to the line starting with "kernel", pressed e again, and appended init=/bin/systemd.
    Somewhere I read that "mkinitcpio -p linux" should be issued to make systemd work. No (positive) effects.
    Paul
    P.S.: Shouldn't there be a topic "systemd" in "Pacman Upgrades, Packaging & AUR"?

    skunktrader wrote:
    poseidon wrote:In the boot menu pressed e, moved one down to the line starting with "kernel", pressed e again, and appended init=/bin/systemd.
    According to the wiki you are supposed to append init=/usr/lib/systemd/systemd if you are using the "Mixed systemd/sysvinit/initscripts installation" mode.  In all other configurations you should NOT have an init=.... entry since init becomes a symlink to systemd
    As far as I know, the init= entry doesn't hurt anything - it just isn't necessary.
    EDIT: Of course, it will hurt if the path was wrong...
    Also, at least on my system, /bin/systemd symlinks to /usr/lib/systemd/systemd.
    Last edited by cfr (2012-11-19 23:53:55)

  • Cloned volume gets stuck at boot "Waiting for Network File System"

    I've used "Carbon Copy Cloner" many times with success and no problems (v 2.3 , default settings, make destination bootable) as I migrated to larger drives or make backups in advance of a major OS upgrade.
    Last time I was successful, I was at OS 10.3.5. I use 3rd drive to boot my Mac, then clone the one non-boot drive to the other. I do the disk repairs & permission repairs as the normal course of this process, before & after. I am now at 10.3.9. I am do this clone in prep to go to 10.4 so I have a good back in the event of later problems.
    When I attempt to boot from the newly cloned partition, it goes fine on the boot process until it hangs at the "Waiting for Network File System" step and never gets past there. I've never had this happen before. I retired all the steps, even ran "Diskwarrier", but no change.
    I am not trying to run from a remote or network drive, just a 2nd drive in my
    G4 from which I have previously been able to boot (until this last clone attempt that is).
    I googled the symptoms ""Waiting for Network File System"", found it to be common, but no real answers. Is this one of those annoying UNIX things? Any ideas how to fix / turn-off whatever is hanging the boot up? Thanks in advance!

    Hi Kool,
    So there seems to be a "speed-bump" around 10.3.9. No wonder I have had the same results with a different tint. I went to Drive Genius to clone this one. Results with that were interesting.
    If I did a [Device] clone, it would take and show at start with 'option' key... and work just like my internal with 3 accounts on it... login and proceed like it was internal. If I did a [Volume] clone, it would not show up at start with the 'option' key... I'd have to boot it from System Preferences > Start-up Drive. Once booted, it had no login screen so all the files were accessible. I took the clone of this 3 account PB and tried it on an iBook. Had to boot from System Preferences too, also, all the account were accessible from that machine... implying that anyone who had that drive could get past/into my files that would be secure on my computer, but not on the clone. If I took the [Device] clone and booted from the ibook at start with the option key, it would not get past the login screen... altho the mouse worked and I could click on the name, that was as far as it got, Froze.
    So, I have figured, for safety, a [Device] clone is it, as long as the original computer lives. The safety features for login seem to be hardwired in the chip that the clone was made from (The iBook had 2 accounts but not my 3). If safety is not an issue, the [Volume] clone is fine... like moving to a newer OS on the same computer. It would seem from your experimentations that the situations with this 10.3.9 is just a hick-up and is solved in 10.4.3 with CCC v3...
    Thanks for your info... I am thinking of going to Tiger, but I am so fond of this Panther...
    Bo

  • Standard Program Name for updating the System-Variables everyday in BACKGRO

    Hi All,
    Can anybody tell me the Standard Program Name for updating the System-Variables everyday in BACKGROUND job?

    Hello matt,
    I have a program with variant.
    This VARIANT input values will store in TVARVC table every day night background job.
    i want the program name

  • Plumtree Crawler Web Services for NT File Systems

    Hi,
    I'm working with Corporate portal v5.0.4J. I'm trying to figure out if the 'crawler web services for NT file systems' are build into the portal or whether it is an optional component that needs to be installed?
    Any info is appreciated.
    J

    The Windows Files Content Service is a separate component from the portal. You can download this component from the Product Center.
    -Paul

  • Tour Synchronization issues "determining the root conf name for main system

    During sync set up (first attempt) after selecting the sync button during the "determining the root conf main for main system I keep getting a "unknown error".
    I have removed the desktop manager, re-installed, updated and same issue.

    Hey,
    Accounts not showing up in the office 365 portal has not got anything to do with ADFS. Generally speaking, the reason that accounts don't show up is because they are not within Dirsync scope.
    There are a number of reasons that this could happen:
    1.Internal domain name has a '@local' upn suffix. Accounts with this specified as their primary upn will not sync.
    2. Any custom sync rules that have been configured within Dirsync may not allow accounts to be synced. For example, if the entire organizational unit structure is not syncing, then not all accounts will appear in the O365 console.
    Has the dirsync rules been customized since it was configured?
    Regards,
    Adrian

  • Changing names for compressor files, nothing works yet.

    I've read different posts on how people have to change the name of the file before compressor will complete any sort of compression.
    Happened to me too constantly. So I'd just change the name once I got that red exclamation mark and then it would just finish compressing just fine.
    This time I changed the name before I clicked submit.
    The name of the file was Animal Control.
    But before clicking submit I named it Animal Control Audio, and Animal Control Video for both files.
    And I still got the stall out with the red exclamation mark.
    This is no good since I feel like I can now no longer rely on Compressor if I need go go somewhere.
    Thanks for any solution to my misunderstanding of the program.

    I'm having a hard time understanding your question. When exactly are you getting the exclamation mark warning, before or after submitting?
    If you're watching the History window in Compressor after submitting your encoding batch, then QMaster writes a file with the name you specified. In this case, when Compressor is still the front-most app, it will see that new file being written in your destination directory, and will put up the exclamation mark ... this is normal behavior.
    Also, have you tried setting a different destination to see if this clears up whatever problem you're having?

  • How to change web-app display name within EAR file?

    Currently we are deploying an EAR file (which contains a web-app and an EJB) per
    BEA recommendations. The web-app shows up on the admin console with '/' as the
    name. Is there anyway to change this to the name I want?
    thx,
    Matt

    FYI - here is the entire content of applicaiton.xml in the EAR file we deploy:
    <!DOCTYPE application PUBLIC '-//Sun Microsystems, Inc.//DTD J2EE Application
    1.3//EN' 'http://java.sun.com/dtd/application_1_3.dtd'>
    <application>
    <display-name>RVApp</display-name>
    <module>
    <ejb>RVTrackingBean</ejb>
    </module>
    <module>
    <web>
    <web-uri>RVWebApp</web-uri>
    <context-root>/</context-root>
    </web>
    </module>
    </application>
    "Erik Johnson" <[email protected]> wrote:
    >
    No, you can't change that in the console. It's defined in the application's
    application.xml
    descriptor file.
    erik
    "Matt Savino" <[email protected]> wrote:
    Currently we are deploying an EAR file (which contains a web-app and
    an EJB) per
    BEA recommendations. The web-app shows up on the admin console with'/'
    as the
    name. Is there anyway to change this to the name I want?
    thx,
    Matt

  • Default name for a file

    Hello from France.
    May I try to explain my problem ? Well, I'll do with my basic english ...
    When a pic is ready to be recorded, PS use the default name (for a jpeg file, for instance) : "Sans titre - 1.jpg". Is it possible to have a name like : "Sans titre - 01.jpg"  or : "Sans titre - 001.jpg", I mean with "0" or "00" juste before the number.
    Thank you for your answers.
    (W7, PS CS5)

    "Ps is not involved in the process at all"
    Of course it is... There is no way to change the default name in the scan, because there is no default name ; if using the scan as independant software, the options for the file name depends of the operating system (W7).
    When I use the scan in Ps :
    - I put the slide in the scan,
    - I press Ctrl+Alt+"!" (a shortcut I created to replace Fichier > Importation > Nikon Scan)
    - the software of Nikon Coolscan opens automatically,
    - I "press" the button "Numériser" with the mouse,
    - at the end of the process, the software of the scan closes,
    - the pic is avalaible in Ps, with the defaut name : "Sans titre - x".
    If I do the same thing with an other scan (for example, my Canon Pixma), the same happens, always with the same defaut name.
    Well, it's not so important... I must just pay attention to change "Sans titre - 1" > "Sans titre - 01", etc.
    Thank you for you help.

  • BADI for changing Appraisal document application name for Web dynpro ABAP

    Hi,
    For Appraisal document customizing through PHAP_CATALOG_PA, We have BADI HRHAP00_BSP_TMPL  to change the BSP application name which can be used in Web layout for output display. Using this we can change application name from HAP_DOCUMENT to custom BSP application name
    Similarly, what is the BADI for changing Web dynpro ABAP applictaion name? Currently its triggering HAP_MAIN_DOCUMENT.
    how do we change application name to some custom web dynpro application name
    Regards,
    Kothand

    Hi Karim,
    I don't know, if there is any chance to get the Webdynpro application name. At least in the ABAP System fields is no information about the webdynpro application name.
    One remark: I have allways problems with BAPIS / BADIS that behave different depending on the caller. Could it be a good idea to pass some information through the interface / parameters?
    Best regards
    Renald

Maybe you are looking for

  • Conflict between Client object model and Item Updated Event Receiver in sharepoint 2010

    Hello All, As per my requirement I have a two custom list. Agent Details Port Name Agent Details contains Agent code, Port Name,  email, address and phone of Agent. Its possible that one Agent Code is connected with multiple Port Name. Basically what

  • Last opened email subject is shown when opening email with many destination addresses

    Platform IPAD2 64Gb, OS version 4.3.5 (8L1), English default language. Issue: email subject field contents not showing correctly. Today I received on my gmail account an email that was targeted explicitely to a group of over 60 addresses, all of them

  • SAML in webservice to BPM scenario

    Hello, I have read the the "How to configure SAML..." but I am not sure if it works in my scenario. We have a "SOAP(XML) to BPM to IDOC scenario" and there is the request to secure the "SOAP to BPM" part with SAML. The scenario works asynchron, so th

  • Incomplete Export

    I have a movie clip. It is about 15 minutes long. Captured from a DV tape. Slightly modified, but nothing intense. When I export it (AVI, NTSC-DV compression, 23.97 fps, 320 X 240) it won't export the entire clip. It only exports 1 minute 13 seconds

  • MDMP Idocs enable to use SPRAS

    Hi Experts I have been dealing with MDMP issues in idocs flowing from my 4.5 MDMP system to ECC 6.0. Basically text in some of the idocs get garbled specifically for Chinese Characters. Basically based on some investigation we can use XI and the only