Changes in Production object

Hi Friends,
I have created on Z table for my requirement, and transported to the production. Now the user wants me to change the type of field when I am trying to change it, its asking me Access key.
Can any one tell me what to do.
Regards,
Line

Yes I am trying to change in Dev only but it is asking request number.
Please tell me what to do
Regards,
Line

Similar Messages

TWO Changes In Production System

Hi , there are two changes in Production system,
one is there is a report i have to do some modification in PROD,for this have to do in DEV,QA,PROD Respectively , here whether i have to use old request to new one , is this is the right practice or not,
second in transfer rules there is a conversion routine , i have to do some modification , How can i do like once again DEV,QA,PROD
Hope u understand the problem
With Regards
MAHI

Hi,
Normally we dont have any authorization for changing the objects directly in production.
You need to make the required changes in Dev and then move to Quality and then to Production. Hence you need to create a new requrest for all the changes you made in Dev and move to Quality and then to Production.
Hope this helps.
Regards,
K.Manikandan.

Code changes in Production system.

Hi all,
Due to the unavailability of the development and quality i want make code changes in production system.
Please tell me is this possible and also i want know that does it effect or not?
Regards,
Ramprasd

Hi,
For editing in PRD system, u need to get authorization for editing. To get auth object, contact basis.
But proper way to edit a code is modifying in DEV, then transport it to QAS & PRD.
Regards,
Prem

Changes in Production Orders

Hi gurus,
I want to track changes made by end users in the production orders in a report format. Which will tell what was old value and what is new value.
What needs to be done for this?

Dear
Changes in Production Order can be traced through following ways :
1.Order Change Management :
Frist a Overall profile should be configured in SPRO > PRoduction>Shop Floor Control > Operations>Change Management for Production Orders-->Define Overall Change Profile.
Create a Change Number CC01 with Release Key
In Object Types select/tick "Actv", "object", "MgtRec",
You get the Change Number by Saving .
Use this Change Number to Change BOM or Routings
Then Release the Change Number useing Release Key till then you don't find the Change of BOM in Production Order.
Then go to Oder Change Process T Code :- COCM
Tick Change Number and Select the Change Number & Execute
Select the Production Order, click on Procurement element icon you get another screen select and execute again.
You get an Pop-Up screen. "Determine changes, Check changes, Change Original Order.
you see the changes in BOM for Production Order i.e. after COCM.
Then Confirm the Changes in Production Order then New changes will be Active in production Order.
Use COCM1 to find out the details or CO03--Extra --change
Please check link : http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPSFC/PPSFC.pdf
2.To get the changes in Production Order apply SAP Note 390635.
3 .You can use T.code AUT10 to check the changes made to production orders in specified period.
Regards
JH
Edited by: Jiaul Haque on Nov 28, 2010 2:11 PM

Changes in production in process chain

Hi sdn
when I 'm making changes in the production to the process chain, the changes are done but when I'm activating it ,it is saying changes can not allowed invalid call sequence action cancelled
rubane

Hi,
Can you please follow the below steps:
Go to RSA1 -> Transport Connection --> Object Changeability
Each Object Type has 3 states:-
1) Not Changable
2) Changable Original
3) Every thing Changable
1) Not Changeable does not allow you to change an object (local or transported).
2) Changable Original allows you to create objects as well as to change those in the originating system.
3) Every thing changable allows you to change the transported objects as well in addition to the locally created objects.
What I suspect is Object Type RSPC (and RSPT) has been set to Not Changeable / Changeable Original in the Production system.
In that case, simply right click on the Object Type RSPC (and RSPT) -> Select Everything changeable.
This should allow you to activate the changes in the Process Chains.
Thanks,
Subhajit.

Can the old product be catched if I change the product in an ite?

Hi experts,
Is there anybody knows how can I catch the old product if I change the product in an item when placing orders?
I mean just change the product number,not deleting the whole line.
Do you know the badi/function name??
Jerry.
Thanks in advance

Hi,
Below are the steps in detial,
1. Declare an attribute as public static in controller class. Redefine method set_ordered_prod and before the statement set_property, assign <oval> to your attribute.
2. Go to SE11 and create a dataelement with domain as CRM_ORDERED_PROD.
3. Go to SPRO->CRM->BAsic Functions->Pricing->Define Settings for Pricing->Maintain Field Catalog.
4. Create the attribute in field catalog with below parameters,
     Field Type = 'I'   ( item field )
     Implementation type = ' '
     Enter field name
     Virtual = 'D'
     Visibility = ' '
     Selection type = 'D'
     Enter the data element
Now save the field catalog and click generate. Now go to SE11 and check for your attribute in structure CRMT_ACS_I_COM.
5. Create implementation for badi CRM_COND_COM_BADI and implement method ITEM_COMMUNICATION_STRUCTURE.
    Inside the method, create an object ref. to controller class. ( step 1) and assign the public static attribute to the attribute
    created in field catalog. example CRMT_ACS_I_COM-<zfield...> = ....
6. Download the pricing userexit manual from OSS Note 809820. Chapter 3 explains about how to create user exit implementations and assign attributes to it. Follow the steps and assign the attribute created in field catalog to your user exit formula.
7. In IPC you can access the attribute using the below statement,
String itemCategory = item.getItemAttributeValue("Z......").getValue();
Hope this helps.
Regards,
Arun
    Assign the attribute in contro to the

Change of Reference Object

Hi All,
We have some infoobjects (A) created with referencing objects (B). In our production system we noticed that the referncing object is not correct. We have been loading the data since a year. This issue was noticed recently.
We need to modify all the objects (A) to point to a new infoobject (C) instead of B. BW do not allow changing the reference objects unless we delete the data in all connected data targets. We are talking about at least 15 data targets.
To modify the refernce from A to C, we have to delete and re-load the data in production system. We want to keep this as the last option and explore the alternatives. We are not ready for deleting and reloading the data since it calls for lot of man hours and planning. Ours is a 24x7 system.
We are considering many alternative approaches and work around solutions. I will be interested to know, if anybody else also faced this situation and if so, how did they fix the issue. I appreciate any ideas in fixing this issue.
Thanks
Surya Muvvala
480.225.9666 (cell)

Hi Surya,
check out the oss note 0568051 for your issue. It describes, what to do in case you will change the reference.
Siggi

Limiting direct changes in production

Hi i would like to ask you guys, on how to limit direct changes in production..
if im using scc4 to say no changes, automatically the system prevent any changes to system.
we still want to be able to change these objects : query ,infopackage and processchain ,
anyone have done such things ?
Your kind inputs is appreciate..
Regards

1 In the admin tool File->save as/ copy as option or
-->This can do but I've seen there is little bit slowness at user end to for response,once file is saved then it would be normal
2 From the path oraclebi/server/repository.
-->You can go with both cases during the service is off or on,I've seen no issues so far; most proffered one is offline.
I prefer 2nd option.
Hope this helps, pls mark if helps
Edited by: Srini VEERAVALLI on Jan 6, 2013 9:59 AM

Infoobject change in Production

Hi
We are in production. Now i want to change an infoobject Material Number, by attaching another char, Marketing Line as Nav.Attribute. Marketing line gets its data from a derivation, not extracted directly from R/3 like other chars (material no,...)
so will this impact my Production objects anyway ?
because i am just adding a object. not deleting it.
Anything can go wrong ?
thanks
venkat

Hello,
I believe not.
You just add a new characteristic as a nav. attribute and feed that attribute by a non SAP extractor.
Then you can use that nav. attribute whatever you want (in InfoProviders and queries).
Diogo.

Error while changing the Resource Object Status

Hi,
I am trying to change the resource object status from Waiting to Provisioned for a self service task. Before approval I see the Resource Object Status as " Ticket Sent To REMEDY" on the administrator's web console and at the Requestor's web console I get the following error message-
???en_US.global.viewProfileForm.Lookup.Ticket-Sent-to-REMEDY???
But after approval, based on the completion the task, the process on both the consoles is set to provisioned. That is what I want to display but the problem comes when the requestors sees the error status message on its console before approval.
Can any body tell me the reason of the above error and how to resolve it?
Thanks in advance

do you have any custom written event handlers getting triggered off after request submission or during approval?
It might also be due to either a browser issue or you might have missed any entry in the xladmin properties file for a custom label/error message etc.

Do you know how to change the Text Object for Billing Document?

Hi,
If you execute Transaction VOTX or VOTXn it will take you to Text Determination. The Billing Doc & Sales Document both has the VBBK as Text Object for me and is it like that for all.
I need to change the Text Object to VBRK for Billing Doc, which is the ideal because I am using the Function Module READ_TEXT to retrieve text. This work perfectly for Sales Document which has VBBK as Text Object, but does not work for Billing Doc where it through as error message saying Text 0020000021 ID 0002 language EN not found.
Thank You
Kishan

Hi kishan,
For updating these text you can use FM 'SAVE_TEXT'.
As for your problem, to get the parameter you need, go to the billing document, go to the text, and display it in plain page mode.
Then you do 'GO TO' -> 'HEADER', and a pop-up window open with the parameters you need Obect type, ID, Name, ...
Regards,
Erwan.

Data not updated in business entity after change in architectural object

Hi,
A business entity was created from Architectural Object.
When we modify the address in the architectural object, the data is not updated in the business entity.
Is there any solution that make an automatic update for the address in business entity after a change in architectural object ?
Thx for your help.
Regards
Saad

Hi,
I have created new infopackage and ran. Now the following message I have got on the monitor.
"Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
Any more thoughts?
Thanks,
Rao.

Assembly to order: change in sales order with change in Production order

I want to activate change in the sales order data when a production order(which is created w.r.t the sales order) data is changed (Strategy 82 used); I have de-activated "No Update" for the corresponding requirement class 201; also the material for which SO created ,is not a part of any Delivery group.
But when I am changing the production order (date/qty.), SO isn't getting updated accoringly.
Please tell me the reason why it isn't happening!!

Hi
The sales order requirement can be made as the production order receipt once you save the order in the system.
so it is possible to change the receipt according to the sales order reqmt if any changes made in the sales order,
in every entry or changes in the sales order ( if you use the stategy 82) . in back end system explode the BOM and the create the production order as per the order reqmt,
even while you do the changes mad in the sales and save that time sytem re explode the BOM once again and change the production order qty.
but if you change the production order , system not re run or explode the BOM , Routing . such setting is not made in the system . so obviously updation will not happen for the sales order .
Edited by: raj on Jun 9, 2009 11:22 AM

BADI for changing the product cost

Hi All,
My requirement is to change the product cost when the costing engine is running via ck11n or ck40n. Iam looking for user exits and BADI's for this requirement.
I did look into the BADI DATA_EXTENSION_CK but this particular BADI does not have export or changing parameters. Can anyone suggest any user exit or BADI's for this requirement. I also looked into other BADI's like
CK_KALAMATCON2_CI
COSTINGRUN_CK
COST_APPORTION_CK
CO_PROD_COSTING_CK
DYNPRO_EXTENSION_CK
ORDER_COSTING_CK
QUANTITY_STRUCT_CK
SUR_STOCK_TRANSF_CK
VALUATION_CK
But none of them served the purpose. Plz help...Thanks in advance...
Regards,
Nirmal.

Hello,
Will this help?
Product costing with Enhancement (Valuation variant with User Exit)
Cheers,
TD

CO-PA Realignment: Changes in Product Hierarchy

Hello all,
We have changed the product hierarchy on some of our materials and we want to realign the PA data to reflect the same.
Our product hierarchy which we have three levels is maintained in KES1. There are no derivation rules. KES1 is updated manually everytime any changes occur.
For example:
OLD
Product: 1-189-01
Hierarchy 1: 100
Hierarchy 2:A7300
Hierarchy3: B56220
So on the material master the prod hierarchy is 100A7300B56220
NEW
Product: 1-189-01
Hierarchy 1: 125
Hierarchy 2:A7500
Hierarchy3: B56120
I tried using KEND for realignment and this does not change anything. Any help, how to proceed with the realignment is appreciated.

Hi Anusha,
Did u also update PH level in KES3 - in specific hierarchy variant ? Also would like to know how did u reset the operating concern
Thanks,
Samik (SAP MM)

Changes in Production object

Similar Messages

Maybe you are looking for