Changes to planned order in R/3 not reflecting in APO

Hi
I have changed the date in planned order in R/3 but same is not updating in apo.
After ccr also it is not happening.
regards
pradeepta

Hello Pradeepta,
The below checks may help you in fixing your issue,
1. Check the APO Inbound or R/3 outbound (depends on the queue settings) for any error queues for this order.If there is one check for the error recorded.
2.If there is not error queue found. Change the user settings in R/3 (CFC2) for recording the queue.Now make a change in the
planned order in R/3 and check for the recorded queue,check the dates here (whether this is the new date or the old one)
3.If it the new date which is sent to APO,then you may need to analyse the CIF logs for the reason for not adopting the dates.
4.Also I remember there are certain Exits/BADIs prevent APO from taking over the dates from R/3. SO, please check ant CIF exits/BADIs active in your system.
Thanks,
Mahesh

Similar Messages

Changes to Planned Order in R/3 not being updated in APO

HEllo -
I am creating SNP planned orders EE in APO and sending them through CIF to R/3.
When I make changes( Qty change) to the planned order in R/3, those changes are not being updated in APO. When I run CCR, I get the error 159 - Differences in content.
When I create a planned order in R/3, that order does not flow into APO, running CCR gives the error 151 - Missing in APO.
Ofcourse, I can trigger the reconcialition job and make then go through but I have not been able to find the root cause. Can someone help me with this?
Appreciate your help
Varun

Hi Varun.
In the R3 system have you activated the BTE's?
SPRO
Integration with other SAP components->APO->Basic Settings for Data Transfer->Change Transfer->Change Transfer for Transaction Data->Activate Online Transfer Using BTE
Applications: ND-APO and NDI need to be activated.
Hope this helps.
M

How to see planned orders for P3 mrp type products in APO?

Dear experts,
I have materials with P3 MRP type (not planned in APO but in R/3 using MRP)
I have active integration models with P3 and X0 mrp type products for planned orders
however I can not see in APO product view the planned orders for P3 materials,
is this normal or should I see those planned orders in APO?
Thanks for your answer,
best regards
Elynn

Hi,
The following prerequisites must be met so that planned orders can be transferred from SAP R/3 to SAP APO
and vice versa:
1.The material masters must be transferred to SAP APO.
2. PPMs must exist for planning in SAP APO.
3. The relevant integration models must be active.
4. An active integration model for planned orders must exist in SAP R/3.
5.An active integration model must also exist for materials, so that the components of the planned order are transferred.
6.The relevant distribution definitions must be maintained in SAP APO, so that planning results can be
transferred from SAP APO to SAP R/3.
Thanks,
nandha

Change firmed planned order to Unfirm Planned order

Hi ,
if we change firmed planned order to unfirm planned order ,is there any effect on WIP and routing changes?
please respond with an answer.
Regards
Rekha
Edited by: REKHA MAHAJAN on Mar 31, 2008 1:34 PM

Hi Rekha ,
planned order Unfirmed -
will allow automatic changes with respect to requirement
planned order firmed -
Any manual change in the planned order is called firmed
and will not allow any automatic changes with respect to requirement
Planned order is just the requirement only there will no change in the WIP .
for example : you have some requirement say PIR is 50 on 31st march you perform MRP
by selecting the MRP type so that you will get firmed planned order for 50
on 1st you have another requirement ( PIR ) for 100 and if you perform MRP again system will create another planned order if this is also firmed . you need to convert manually into production order.
once planned order is converted into production order and there is no link with either routing or
workin process with planned order and is meant for only open production orders . You can convert all the planned orders collectively also
if any doubt come back
regards,
Vimalbalaji.J

RECORDING CHANGES IN PLANNED ORDER

HOW TO KEEP HISTORY OF CHANGES PLANNED ORDER.

Hi,
As per my knowledge, It is not possible to track history of changes for planned orders.
You can track changes of Production /Process orders in OCM & Master data like BOM,Routing changes in ECM.
Regards,
Tejas

Sales order rejected in ECC does not reflect in APO

Hi Friends,
We are working on ECC6 and APO7.0 for a paper mill- IS Mill functionality. We have MTO ATP with block planning and a exernal trim application. The sales order is rejected in ECC but did not reflect in APO. This has not appeared in daily CCR monitoring also. The order is trimmed, i.e planned for production. I dont see the rejection in APO table: /SAPAPO/SD_DOC Beow are the sequence of events:
-Order rejected 3/25
-Sales order 42678-20 had planned order 587645.
-Planned order 587645 is part of the enquee 4487 that was downloaded to trim on 4/4. Well after the rejection.
Please guide me if there is any way to prevent such occurences, leading to unnecessary planning, blocking of capacities.
Thanks in advance.
Arvind

Arvind,
I haven't worked with SCM when linked to IS_MILL, so I am not speaking from experience. However, I have worked with SCM and ERP Baseline, so I will be speaking from this perspective.
You didn't mention how your GATP is configured, and what planning modules you have implemented in SCM. These facts definitely can have an impact on the supply elements (planned or production orders), and what should/should not happen to these supply orders.
You also didn't mention what indicated to you that the Sales order is inconsistent between the two system. FYI just looking at tables is not a definitive method. The most important bits of information lie in LiveCache.
I don't know what is meant by "Planned order 587645 is part of the enquee 4487 ", so I will assume it is some customized interface, and I will ignore this statement for the moment.
So, I will just make a couple of suggestions as a starting point. If the sales order is actually rejected, it should not appear in R/3 MD04. Does it? If so, run program SDRQCR21 in R/3. The inconsistent order should then disappear from MD04.
If MD04 does not show the sales order (as it shouldn't), but /SAPAPO/RRP3 does show the sales order, then run program /SAPAPO/SDRQCR21 in SCM.
If neither MD04 not //RRP3 currently shows the sales order, then please tell me why you think there is a problem.
Best Regards,
DB49

R/3 numbers are not reflected in APO

HI
i transfered planned order from PPDS to R/3. it successfully CIFed as production order but R/3 production orders are not reflecting in APO. all integration models are in active status. what will be the reason

Hi Thennarasu,
One or more of the input products(components) have special procurement key set in R/3 material master for withdrawal from another plant.
Planned orders are changed in SAP APO and then the conversion indicator is set to initiate conversion into a manufacturing order.
But the queue from SAP APO to SAP R/3 hangs with an error message that indicates that the material in question is not maintained in the certain storage location of a specified plant.
As a result, the planned order is not converted.
Check to maintain the storage locations in customising - Enterprise Structure->Definition->Materials Management->Maintain Storage locations. Here maintain the storage locations of the Plant from which you are procuring the components under the Plant which requires them.
Please confirm
Regards
R. Senthil Mareeswaran.

MRP Controller changes in Planned order

Hi Gurus,
If anyway possible to change MRP controller in Planned order. I tried to change in MD12 but it's shows only display mode. Any answer?
Thanks,
B.Deethya

Dear,
I do not think so you can change the MRP controller any where other than material master and source list .Please check this threads which has approched similar kind of alternative solution :
/thread/1611534 [original link is broken]
Revert back for more information.
Regards,
Alok Tiwari

Planned Order for a Product not being shown

Hi Experts!!
I am an ABAPer and I am new to SAP APO. We are now working on /SAPAPO/PPT1. When clicked on some quantity, all the planned orders existing for that product are being shown with respective quantities. Now, I am trying to create a new planned order for a product through FM BAPI_MOSRVAPS_SAVEMULTI3 by splitting the quantity among the receipts. I have gone through several posts and have written the logic. But the newly created planned order is not being shown in /SAPAPO/PPT1. I can't find it anywhere. Am I doing something wrong here?
Here I explain it with an example. I have an aggregated entry for the month of June with quantity 3000, which is already split under receipts 1234 and 1235 as 1000 and 2000 EA respectively. Now, I need to split it as 1000 EA for each planned order and hence am creating a new plord. I am using same FM for changing plords as well with quantities as 1000. So, now both the receipts are being shown with quantity 1000 and the aggregated value as 2000... and the newly created one is missing. But I need the new one to be displayed and the aggregated should be 3000. Why is this happening? Am I missing something?
I already have posted a query that is related to this total requirement. Change Receipt Quantity for Planned Order in LiveCache . This has the first part of the total requirement. Just provided for extra info, but not related to this issue however.
Please help me out. Your help is highly appreciated. Thanks a lot!!

Hi Srinivas,
With prior experience, i am sure that the BAPI SAVEMULTI3 can be used for Creation & Change.
I dont think,the FM's which you are using, are recommended by SAP. So , try to use BAPI most of the time,as it ensure data consistency.
As you told, order is not flown to ECC, but visible in APO, i would suggest you to check the importing parameters of the bapi, like EVENT CONTROL ( should be '1' ).
and COMMIT_CONTROL(should be 'E').
Also, check your queues after execution of bapi. you should find your change pointer in the inbound queue of R/3 System. Do let me know if you still stuck.
Thanks,
Santosh KB.

Changes to Limit Orders in SRM do not replicate to ECC

Hello Gurus,
I am using SRM 7.02 Extended Classic with ECC 6.0. We are having issues when making changes to a Limit Purchase Order. Once the change is made and Ordered, the information does not update the ECC PO.
An additional output must be generated to update the backend system.
I have found some information on SRM 5 but not for 7.
Any help would be appreciated.
Best regards,
Mary

Hi,
I thyink the replication to backend happens by RFC FM. what you can do is take the GUID of PO and run BBP_PD_PO_TRANSFER_EXEC FM. before doing this put a BP in FM B46B_DPO_TRANSFER at code where FM BBP_PO_INBOUND is called. Here you will come to know what data exactly is getting passed to ECC.
thanks,
sankar.

Position order under org chart not reflecting SAP

Hi,
I I am having a problem at the moment where the position under the org chart boxes in nakisa do not reflect the order in SAP. Is there any setting to enable the true reflection of order in nakisa or is this a schema change?
Thnaks

Hi there,
Yes, you need to define the object sort order for each hierarchy in each orgchart. You can do this in the Admin Console by going to the OrgChart module, selecting your orgchart (e.g. Organisation Structure) and then going to Sort Fields. You will need to do this for any subsequent linked hierarchies too (where applicable) as you might want a different order for each type of object.
I hope that helps!
Luke

Changes in enhancement to the component configuration not reflected

Hi,
I have created a Z enhancement to a standard OIF component configuration. In the enhancement I have added a button.
When I run the application I am not able to see the button I added. When I select More Field Help on the context menu of the WD application, I see the Z enhancement name in the Configuration ID. This means that the enhancement configuration is getting called but the button is not displayed. The button's visibility and final properties are set to true.
Can anyone help? To my knowledge I do not have to do any other configuration after creating an enhancement. Let me know if I have missed something.
Thanks,
Reena

The issue is resolved. I noticed that there are 2 variants set for the componont configuration (OIF conf). And the variants are set dynamically at runtime. I was making enhancements to a wrong variant earlier. That was the reason why the changes were not reflected.
Edited by: reenaSDN on Sep 26, 2011 8:09 AM

The logo for the application has been changed in Azure portal, but it's not reflected during the login

Hi Azure support,
my name is Linda, Office365 technical support. I want to ask one Azure question on behalf on my customer. she has AAD_basic subscription.
she tried to change logo of one application, but failed. she followed the steps as below:
1. add the "Logo" in the application;
2. logo not reflect in the login page.
I cannot attach the screenshot, if you want, you could email me v-linsha
hope you could give some suggestion and resolution. thank you.

Sometimes I know I haven't changed anything in the external file. In this case, the supposed conflict seems to be a bug and I overwrite with Lightroom metadata without exception (but with fingers crossed) - that bug has been reported.
Other times however, I have edited the file in an external editor, and its possible that the external editor wants to add some information that may be worth having, or it may be that its lost the original information - this is when its a dilemma:
If I overwrite disk file with Lightroom metadata, I may be losing what the external editor added.
If I overwrite Lightroom metadata with disk data, I may be losing what Lightroom had and the external editor dropped.
This scenario has not been reported as a bug, since I don't know if it is one. If I could see the difference between the two, then I'd know.
Rob

Change in Quota at Exchange Server does not reflect in Outlook

I have changed the quota for a database on the exchange server from the default 2 GB to Unlimited and even restarted the information store service. The user is able to receive emails and send them as well. However in Outlook the message still persists that
users quota is 2 GB. Have restarted Outlook several times. Can anyone shed some light why this may be happenning. Also what is the default interval in which the information displayed by Outlok changes after a change at the exchange server?
Ron
Ron

Hi RonMen,
The change of mailbox quota will not reflect in outlook immediately, the update occur every 30 minutes by default.
Updates can be triggered either manually by the user or automatically.
The following user actions will request the server to update the properties :
1. Emptying Deleted Items
2. Emptying a Folder (via the button in the ribbon’s folder tab or right-click on folder)
3. Permanently deleting (shift-delete) an item
4. Closing the Archive / AutoArchive dialogs
There is a more detailed article for your reference:
Mailbox Quota in Outlook 2010 - general information and troubleshooting tips
http://blogs.technet.com/b/outlooking/archive/2013/09/19/mailbox-quota-in-outlook-2010-general-information-and-troubleshooting-tips.aspx
If you have any further questions, please let me know.
Best regards,
Eric

Changes to an order through Call Transaction not showing up in change log

I m having a problem such that if I update an order programmatically with Call Transaction u2018VA02u2019, the order does get updated updated but I donu2019t see the changes in the change log. I m only updating the order quantities. However if I update the same order quantities manually by going to TCode VA02. The changes do get shown in the change log from the Environment u2013> Changes menu. Can you please help.
Following is the simple recorded code.
PERFORM bdc_dynpro      USING 'SAPMV45A' '0102'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                              'VBAK-VBELN'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                              '/00'.
PERFORM bdc_field       USING 'VBAK-VBELN'
                              '10655'.
PERFORM bdc_dynpro      USING 'SAPMV45A' '4001'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                              '=POPO'.
PERFORM bdc_dynpro USING 'SAPMV45A' '0251'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RV45A-POSNR'.
PERFORM bdc_field USING 'BDC_OKCODE' '=POSI'.
PERFORM bdc_field USING 'RV45A-POSNR' '10'.
     PERFORM bdc_field       USING 'BDC_CURSOR'
                                   v_rowid.
PERFORM bdc_dynpro      USING 'SAPMV45A' '4001'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                              '=SICH'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RV45A-KWMENG(01)'.
PERFORM bdc_field       USING 'RV45A-KWMENG(01)'
                               '7'.
PERFORM bdc_dynpro      USING 'SAPLSPO2' '0101'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                              '=OPT1'.
CALL TRANSACTION 'VA02'
                 USING t_bdcdata
                 MODE   'A'
                 MESSAGES INTO t_messtab.
COMMIT WORK AND WAIT.
IF sy-subrc NE 0.
ENDIF.

Could not find answer

Changes to planned order in R/3 not reflecting in APO

Similar Messages

Maybe you are looking for