Changing Account assignment reference after posting flows to accounting

Hi All,
Is there a way for me to change the account assignment reference after I posted some flows in the past for a interest rate financial instrument? 
I need this because accounting wants to change the GL account posting for legal fees from one GL to another when a long term debt changes to a short term debt (less than a year away from maturity).  I was assuming that changing the account assignment reference in TPM28 would work.  Is this true?  I do not want to transfer any of the old postings but anything moving forward.
Thanks
Regards
Morgan

Hi Ravi/Mahesh/Lorenz
The issue is I can do valuation class transfer for securities or loans (TPM15).  But I have my long term debt in the money market area (Interest rate instrument with product category 550).  I have assigned company code, transaction type, product type to determine the account assignment reference.  So I am not able to do a valuation class transfer I think.  Is there any other way?
I tried to access TPM82 & TPM15M & it says 'Function not allowed'. We are on Ehp5.0.
Am I missing something?
Thanks
Regards
Morgan

Similar Messages

  • No change in status V after posting of park document.

    Hi All,
    When we park any document the system create status V in BKPF and after posting the status change to normal.But in my case its not happening for certain park document which has been posted.
    Please note that we are not using the standard process to create the park document.
    we are following thr below order
    1.Parked doc gets created via APNet
    2.Users scan the images of the invoice and the signed RFP form
    3.Once scanned and the barcodes match, workflow creates an item in the AP work center Inbox
    4.Users open the work item and then post the invoice
    Please let me know your suggestion on the same
    Regards
    Ansuman
    Edited by: Ansuman Mohanty on Jan 24, 2011 5:54 AM

    How can we change a parked document's fiscal year?
    I parked a document in fiscal year 2011, period 01. now I want to post it in fiscal year 2010, period 12.
    When I use FBV2 to change header information, it shown up an error message:
    Changing of document number or fiscal year not possible here
        Message no. FP041.
    How can I do now?
    Thanks.

  • Can we change the cost element after posted some expenditures.

    Hi friends,
    My client ran the depreciation upto jan 2009, afterthat we found the depreciation GL's are not set the cost element.
    so the Depreciation values were not posted cost center wise, now we want to change the GL's cost element , is it possible, if it is possible what is the steps.
    with regds
    muthuraj.g

    Yes,
    You can create cost element and interface depreciation posting to CO. For missed Depreciation, manual posting in CO can help to reconcile with FI.

  • After post accounting document user cannot change Reference Field

    Hi,
    I have a issue. After post accounting document user cannot change Reference field value. Please suggest .     
    Thanks & Regards,
    Hemant Maurya

    Hi Hemanth,
    Mr. ajay's solution solve your issue.
    If you activate it will applicable to entaire client (it is not comp code specific)
    For Activation USe T.Code: OB32 maintain Field (BKPF-XBLNR), Account Type & Transaction Type Blank
    Remove Field Can be change Check Box
    Regards
    Viswa

  • Change account assignment for posting key-urgent

    Dear expert,
    please advice, when running mb30, in accounting doc for material xxx we want to change account for posting key 91 with other account since the old one is blocked.How to change this account assignment then?
    Thank you

    Hi
    I am not sure whether MB30 Tcode exist. anyways, if you are sure of the Movement type with which your document is getting posted, then you can get the details of the Transaction in the OMWN. In OMWN please select the Movement type and you will see all the Tr Keys.
    Or you can get into OMWB and select Simulation. Give the material, plant and movemnet type and then select the account assignments you will have all the information.
    Regards
    Nambi

  • Changing cost assignment after posting advance

    Hi Friends,
    I have a problem;
    I create a travel request (TRIP) with some advance request
    Cost is charged to Cost center 100%
    Settle the request, post the adance(PRFI, PRRW)
    Enter expenses,
    Change cost assignment to WBS element in PR05
    Post the trip
    it posts to same cost center, not to WBS element
    Please note that i post the trip in accounts depending upon activity type. For WBS, we have different account
    If there was no advance posted, the WBS change takes place correctly.
    any solution please!
    Thanks and regards!

    Hi,
    Till you create an expense report you will be able to change cost assignment, but once expenses is created no changes can be made to the cost assignment.
    And also, while posting you can change the cost assignment either from cost center --> cost center or WBS --> WBS and not vice versa.
    Hope this helps.
    Regards,
    S.Srikanth

  • Not allowing changes to payment terms after the AR document is released to accounting

    Hi,
    Anyone know the best way to not allow a user to change the payment terms after the AR document has been created in AR? This is affecting aging because users are changing the payment terms without permission. What is the best way to control that?
    Thank you.
    AK

    Hi A K
    Frequent change in payment terms is something business should introspect. Payment term is decided and agreed upon with customer/vendor during the initial stages.
    However from IT perspective, it can be controlled keeping some system controls.
    1. Limit the Customer master change transaction to very limited users or to a manager. There should be internal approvals by management for business to make a change. Bring this into force.
    2. Regularly run the customer master change reports and provide the trend to management to restrict or limit the changes.
    3. Use Change Message control for master data by providing necessary warnings or error messages when master data is changed.
    4. In  the sales order level, there is every possibility to change the payment term. Based on the user authorization get the payment term field greyed out and provide change access to accounting or to a specific user upon approvals. This is a bit complex process but I feel this brings up controls and stops the process from exploitation.
    5. Also activate 'Sensitive fields' KNB1-ZTERM for payment term field in customer master. This brings up another layer of confirmation of change by other users.
    6. Another back route, not recommended in all cases, is to subsititute the required payment term during accounting document posting.
    Hope it helps.
    Thanks,
    Sekhar

  • Changing Contact assignment to account

    Dear experts,
    in SAP standard it seems that it's not possible to change an existing assignment from a contact to an account in BP_CONT component. When I create a contact and assign an account, the account field becomes read only and cannot be changed anymore..
    So I enhanced component to set this field to be input ready after assignment as well. But when I enter another account nothing at all happens..
    any ideas?? Thank you!!
    BR Matthias

    Hi,
    Yes this is a standard SAP feature , you will not able to change the assigned Account from the Contact Overview screen.
    To change the assignment you need to go to that particular Account and in the Account Overview page goto Contact AB and then delete that particular Contact Person and then save that account.
    Now if you open your contact person you will find the Account field as blank and you can assign a different account.
    To enhance the component and just making the field enabed wont work as this feature will be coded somewhere in some class or BADI.
    Hope it is clear now.
    Regards,
    Shobhit
    Edited by: Shobhit on Feb 3, 2011 10:47 AM

  • Treasury--Account Assignment  Reference

    Dear All,
    I am new to treasury and is presently trying to understand Product Type 62A works.
    Can someone please help me to understand the concept of Account Reference assignment.I have checked the IMG-Treasury-link to Other Components and checked the assignment of GLs to account sysbol through AAR and valuation area.
    But I am unable to understand how AAR are determined as there are several Product Types.
    Also there is a link in IMG which says Determination of AAR for defferent types of product, here I could not find Product Type 62A either.
    Please Help
    In other post I will request for certain clarification on Position Management.
    Regards
    Raju

    Hi,
    Product type 62A is interest rate swap. Suppose a company issues a variable rate bond where it has to pay periodic interest based on a benchmark interest rate (say, LIBOR). To hedge its risks, it may parallely enter into an interest rate swap transaction with a bank where it pays bank a fixed interest rate and gets from bank variable rate based on that benchmark; for the same nominal amount (principal of the bond).
    Account assignment reference is used as a criterion for account determination. In Account determination, where GL account is assigned to account symbol, you will see a column for account assignment reference; so different GL accounts can be assigned to different account assignment references. Account assignment reference is determined by derivation rules; an example of a derivation rule may be if business partner is BP1, product type is 62A, transaction type is 300, then account reference would be AAREF1. It can get a bit more complex with grouping etc. but usually it would be a simple condition as defined above.
    To see what was the account assignment reference derived for a transaction, display the transaction and go in Environment-Positon Indicator.
    Look for config for account assignment reference determination derivation rules under:
    Link to Other Accounting Components
    Define Account Assignment Reference Determination (OTC Transactions)
    Define Account Asst Reference Determination (Securities/Listed Derivatives)
    Manish

  • Derivation of Account Assignment Reference using Fund

    I am trying to derive account assignment reference using “Fund” as source field. I have created the account assignment derivation rule (Tcode – TPM30) using following condition and Values
    Source Field
    Company code
    Product type
    Fund – Not able to see as Source field after activation of FIN_TRM_PSM_INTEGRATION business switch
    Target Field
    Account Assignment Reference (AA_REF)
    Condition
    Product Type = 410

    Hi there
    You can only use the Derivation Types which are selectable. You cannot create your own ones such as "fund". In this case, if accounting entries are different you have to create a new product type called "funds".
    Regards
    Juerg Heiz
    [email protected]

  • Define Account Assignment Reference Determination

    Hi Gururs;
    I am configuring the "Define Account Assignment Reference Determination" for OTC and Securities. I find that it has atransport button in the toolbar. After defining the Definitions and Condition tabs, while saving a popup for transport request never pops up. Please let me know how to do the configurations so that I can transport?
    Regards;
    Sumanta

    Hi,
    I guess you are talking about Interest Rate Swaps.
    Use the path:
    Financial Supply Chain Management -> Treasury and Risk Management -> Transaction Manager -> OTC Derivatives -> Transaction Management -> Condition Types
    Here you can define conditions and assign them to transaction types.
    Please let me know if there is anything else.
    Thanks and regards,
    Abhinav Sethi

  • Account Assignment Reference Does Not Get Updated

    Dear TRM experts,
    I have posted a couple of deals for product 51A in the system.
    When I go to the position indicator, the account assignment reference field is not updated.
    Due this, I am unable to post during TBB1. Is there any customization which I may have missed out.
    Appreciate your help on this.

    Hi,
    The problem could be the currency of the valuation area. It has to be the local currency. Maybe the company code has the local currency but the valuation currency is another.
    Without having access to your system it is difficult to say. Maybe double check your customizing for assignment of update types for derived business transactions in spro:
    Transaction Manager
    -> General Settings
         -> Accounting
             -> Settings for Position Management
                  -> Derived Business Transactions
                      -> Update Types
                          -> Assign Update Types for Derived Business Transactions
    I hope this is helpful.
    M Trein
    Edited by: Marcelo Trein on Jun 21, 2011 12:19 AM (spelling)

  • Can we change the alternative COA after transaction data posting

    Hi Friends,
    My client has wrongly updated the GL account in alternative Chart of accounts column in Company code segment. They didnt realise and they posted some transaction data as well.
    Today they realised and tried to change the alternative COA and it showed an error message "GL account balance is not zerowised". They tried to clear the GL account balance, but couldnt solve the issue.
    Please let me know is there any other way to change the alternative COA after entering the transaction data.
    Thanks,
    Dwarak

    thnks

  • Account assignment references

    HI Gurus,
    I am battling to set up account assignment references in Transaction Manager. As a result, I am unamble to post to FI for my MM transactions. Even when i go to my update types, they do not have any G/L accounts assigned to them. Can anyone assit me with a methodical way to go about this?.
    Regards

    Hi,
    In the accounting node in Transaction Manager, go to Link to other accounting components.
    First define your account reference name in the accounting component.
    Then define a derivation rule.  Here read the documentation.  The way should be that your account assignment reference should be automatically assigned to the money market transaction based on your product type and probably currency.
    Then in the Define account determination node -- define a posting specification and assign it to your update type.  Define an account symbol and specify what kind of an account it is.  In posting specification, specify the account symbol  for debit and credit entries.
    Then assign your account symbol a G/L account based on the valuation area and account assignment reference.
    Regards,
    Ravi

  • Sap treasury account assignment references

    Hi,
    In Account Assignment Reference, which kind of GL Accounts needs to be assigned
    please advice.
    with regards
    raju

    Hi Raju,
    Account assignment reference is used as a criterion for account determination. In Account determination, where GL account is assigned to account symbol, you will see a column for account assignment reference; so different GL accounts can be assigned to different account assignment references. Account assignment reference is determined by derivation rules which is quite simple based on product type and transaction types.
    To see what was the account assignment reference derived for a transaction, display the transaction and go in Environment-Positon Indicator.
    You may assign various positions G/L to these account assignment references, eg one for FD one for commercial papers. The way you want to see your balance sheet posiiton that way you can define to which GL to post.
    Regards,
    Jyoti

Maybe you are looking for