Changing Default "Keep Alive" & " Max Processing Time" values in SMICM

Dear Experts
As you aware the default values in SMICM --> Go to --> Services The default values "Keep Alive" & " Max Processing Time" of services like HTTP & HTTPS is 30 sec & 60 seconds respectively.
Every times when we restart application server - we are increasing the time values manually. once we restart they will be reset to original 30 & 60 sec respectively.
I want to make customozed values permanently which should not be lost even after restart of application server.
Please Help
Regards
PR

If you have not set the PROCTIMEOUT parameter, TIMEOUT (or icm/keepalive_timeout) defines both the processing timeout and the keepalive timeout. Also, as of release 6.40, the keepalive timeout is limited to a maximum of 30 seconds.
In a system where the default timeout settings of 30 seconds for the keepalive timeout and the processing timeout are not sufficient because of long-running applications, we recommend that you set the TIMEOUT and PROCTIMEOUT parameters for the relevant services so that you can configure them independently of each other. In addition, we recommend that you do not set the TIMEOUT value higher than necessary, for example, to the usual default value of 30 seconds.
We recommend, for example, the following settings:
icm/server_port_0 = PROT=HTTP,PORT=1080,TIMEOUT=30,PROCTIMEOUT=600
to allow a maximum processing time of 10 minutes.
Thanks,
Tanuj

Similar Messages

Error in File IC Work Order Report_v3-3: Max processing time or Max records

Hello Friends,
                      While running the Crystal report in Business Object Infoview, I am getting the below mentioned error when i am trying to go to the next page or trying to export all pages of report into PDF and any other format. I can see the first page in output and can export 1st page into PDF.
2010-12-29 17:28:05
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Error in File IC Work Order Report_v3-3:
Max processing time or Max records limit reached---- Error code:-2147215357 Error code name:internal
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.getPage(Unknown Source)
     at com.businessobjects.report.web.event.q.a(Unknown Source)
     at com.businessobjects.report.web.event.q.a(Unknown Source)
     at com.businessobjects.report.web.event.bq.a(Unknown Source)
     at com.businessobjects.report.web.event.bt.broadcast(Unknown Source)
     at com.businessobjects.report.web.event.ak.a(Unknown Source)
     at com.businessobjects.report.web.a.p.if(Unknown Source)
     at com.businessobjects.report.web.e.a(Unknown Source)
     at com.businessobjects.report.web.e.a(Unknown Source)
     at com.businessobjects.report.web.e.if(Unknown Source)
     at com.crystaldecisions.report.web.viewer.CrystalReportViewerUpdater.a(Unknown Source)
     at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
     at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.do(Unknown Source)
     at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:595)
Please Help.
Thanks,
Ziad Khan

Ok it looks to me that there are more than 20000 rows in your backend system that have to be fetched.
You can change this limit in the Central Management Console . Login as administrator and go to Servers . Double-click on the Crystal Processign server and change the value in the field Database Records Read When Previewing or Refreshing (0 for unlimited) according to your needs. AFter the change you have to restart the Crystal processing server.
Regards,
Stratos

Error: Max processing time or Max records limit reached

Hi All,
While I run the report in Infoview, I get the below error:
Unable to retrieve object:
Max processing time or Max records limit reached
Kindly suggest me.
Thanks,
Meena

There is a default limit on the number of records returned and on the time out of an 'idle' connection..These could be set in the CMC , however first try to check the query for that report and see if it is applying your record selection criteria at the database level ( use the Show Sql option and see if all your selection criteria have been turned into WHERE clauses)
- this will drastically reduces both the number of records returned to the Crystal and the time it takes for...
You can find setting here:
CMC>servers>page server>properties
Its always not recommended to set it to unlimited as page server is not a robust server, you need to schedule such reports that uses job server which is more robust.
Regards,
Parsa.

HFM Web Sever Configuration--Keep Alive and Session Time Out Optimal Config

We recently implemented an HFM 9.3.1 environment. We are using Windows 2003 Enterprise SP2 servers with IIS6. We have two HFM Web servers connecting to an application cluster with two application servers in the cluster. We were getting some errors when trying to unlock HFM cells in Workspace, but we were able to perform the functions fine on the application using the WIN32 client.
I opened a ticket with support and they recommended modifying the subcontext.properties file located in %HYPERION_HOME%\deployments\WebLogic9\servers\Workspace\webapps\workspace\conf. They recommended changing the following settings:
#KeepAliveInterval=30
#SessionTimeout=60
From what I understand, these settings are for the communication between the HFM Web Servers and the application cluster servers. I'm wondering how changing these settings may affect our environment. Are there negative effects and/or trade-offs for changing these settings? Is there a recommended threshold or maximum value?

Hi Dinesh,
This cannot be achieved without development enhancements to some standard SAP framework component, to introduce a "keep-alive" concept. If you are using a CMS for CTI or email integration, you need to ensure it supports keeping the communications session alive also.
Sincerely,
Glenn
Glenn Abel
Covington Creative
www.covingtoncreative.com

Max processing time or Max records limit reached (Crystal Reports Server)

Although my report runs fine from with Crystal Reports (designer), I get an error when I try to run it from the Crystal Reports Server portal.
I get an error u201CMax processing time or Max records limit reachedu201D.
How can I solve this problem?
Iu2019m accessing a DB2 database on an iSeries Server thru ODBC. I know that the report uses a lot of data. Therefore I have set u201Callow query timeout yesu201D within the ODBC data source. The data connection itself is not the problem, I have no problem running other reports on the same connection.
PS. A do not know whether or not this is the right forum for my post. I first posted within "Java Development - BusinessObjects Enterprise, BusinessObjects Edge, Crystal Reports Server" but I did not get any response.

I found the answer to my problem:
1) Log onto the CMC
2) Goto "Servers" in the dropdown menu
3) Expand "Service Categories"
4) Select "Crystal Reports Services
5) In the right window will be listed the currently running services. The 2 services that Dell mentioned are in there under "Description": CrystalReportsProcessingServer and CrystalReports2013ProcessingServer
Hope this helps somebody else.

Changing default Work Center during CATS time entry

Hi Folks,
I am hoping someone here can throw some expert advice.
Currently during time entry in CATS, we have Work Center coming in from the Work Order. Its getting defaulted without any option to change it. Business here has a need to change it. I have llooked into the CATS profile to see if there is a place that enable the WC to be defaulted.
In Transaction CAC1, there is a section that shows what fields are being defaulted during CAT2 time entry. However I do not see the Work Center as one of the option there.
Can any one help?
In short, where do we disable the defaulting of the WC from the Word Order during time entry?
Thanks in advance.

Hi,
Adding to what Kapil said; if the work centre is a grayed out in time shet screen then you can go to CAC2 transaction and make it editable. By this way users will be able to change the work centre on screen.
Regards
Sreekanth

Change Default Application level setting for checkbox value from "On"/"Off" to 1/0

Hi,
I am creating livecycle designer forms. In that the checkboxes take a default value of "On'/"Off" and I have to change it to 1 and 0 in all the boxes on layout checkbox property.
In livecycle i have to change it in Object-Binding tab.
Is there an application level setting where I can set the default to 1 and 0 instead of "on/"off" at the app level itself? this way every new form will have 0 and 1 instead of off/on
I export the form data to XML and push it to database and it needs 1 and 0.
I need the app setting for both Adobe Acrobat 9 Extended Pro
Please help

It is 1/0 by default .....if you drag a checkbox from the object library onto the canvas and you are getting on/off as your default, then you have modified th eobject. You can set the object the way you want (anf property not just binding) and then you can drag the object back onto the Library palette. This will ask you to name it and if you choose the same name it will overwrite the one that is in the library.
Paul

Weblogic shutting down keep-alive socket improperly?

We were sometimes experiencing strange IE behaviour when surfing on webapps on our Weblogic application servers. After investigation we found that IE has a bug in its resend behaviour, so when resending a POST request it sends the headers (including Content-Length) but forgets the form-data. This causes the server to time out waiting for the data. (Note: We are using Win2K and IE6 SP1 on the clients.)
The IE resend is triggered on a default installation when 31-59 seconds have passed since the last request.
This is because IE will try to reuse a socket that has been told to keep-alive until it has been idle for 60 seconds but WLS will by default close kept-alive sockets when they have been idle for 30 seconds. So in the range 31-59 seconds IE will consider the socket alive but WLS has closed it.
The resend bug is really an IE bug and doesn't concern WLS, but then I saw that IE would function correctly with an Apache server with a default keep-alive timeout of 15 seconds.
Using Ethereal I could get the information depicted in the tables below:
Weblogic with keep-alive timeout 30 secs
old socket
Time 00 : User navigates : IE POST request -> WLS, WLS HTML -> IE
Time 30 : Socket times out : (no network traffic)
Time 45 : User navigates : IE POST request -> WLS, WLS TCP_FIN -> IE
new socket
Time 45 : : IE resends POST request without form-data
Apache with keep-alive timeout 15 secs
old socket
Time 00 : User navigates : IE POST request -> Apache, Apache HTML -> IE
Time 15 : Socket times out : Apache TCP_FIN -> WLS
new socket
Time 45 : User navigates : IE POST request -> Apache, Apache HTML -> IE
To summarize, IE handles Apache well as Apache sends a TCP FIN telegram (to close the connection) as soon as the kept-alive socket times out.
Therefore IE never tries to reuse the socket but instead starts on a fresh one on the next navigation and a resend is never necessary.
Weblogic, on the other hand, doesn't send the TCP FIN (connection close) telegram until IE actually tries to use the connection even though it timed out 15 seconds earlier. In this case IE needs to resend the POST request and this is when the form-data is forgotten.
So, my question now is if WLS behaviour could be caused by not shutting down kept-alive sockets properly at keep-alive timeout? Or why are there no TCP FIN telegrams sent at timeout?
Mike Wilson

After doing some more investigation I have found that the "silent" shutdown of keep-alive sockets is only seen on the Linux version. The Windows version of Weblogic 8 behaves correctly, like Apache on Linux, but Weblogic on Linux does not...
Anyone can confirm if this is to be considered a bug?

Planned delivery time & GR Processing time

Hi all,
I would require a clarification on this one,
Scenario - After an MRP run, the Purchase Requisitions for materials are generated & the order release date is being calculated by subtracting only the planned delivery time from the requirement date. But to the best of my knowledge
"Purchase Order release date = Requirement date - (Planned delivery date + GR Processing time)"
Solution required - Is my understanding correct & if so, where should i make the changes to include the GR processing time for the computation of order release date. Is there any other field which i need to add to my PO release date computation. An early response in this regard would be highly appreciated.
Regards,
Vivek

Hi,
The order release date simply takes the requirement date and subtracts the planned delivery period (as you have indicated).
But this has ALREADY taken the GRP time into account and so you don't nedd to (and shouldn't) add it in again.
For example,
Material A has a Planned delivery period of 10 days and a GRP time of 3 Days. The date that the production order is to be started is 30 July.
The MRP run sees the requirement date as 30 July but it also sees the 3 days GRP and so it asks for the item to be delivered 3 days prior to this date (27th July).
The planned delivery period is 10 days and so the PO will need to be created by the 17th July.
So the dates are correct and do not need any further changes.
If you were to take the GRP time off again this would be wrong.
Steve B

Low printer with lomg processing times ; network issues

Hello,
We are running ECC6 on HP-UX 11.23/Oracle 10.2
We have configured all our printers ( more than 300) using the host spool access method L : Print Locally using LP/LPR.
Every day, we have the same printers with the sames "low printers" :
sm21 syslog shows ;
Printer WRAL Temporarily Locked Due to Connection Problem
Spool Process logs indicates ;
Fri Feb 17 11:09:37 2012
Warning: lpq on printer WRAL took 16 seconds!
RSPOSYSLOG:
SYSLOG written: CODE FBL, locat 28, param WRAL&16&
There are several notes that indicate how to deactivate the printer pooling, but still, the best thing to do is to pinpoint the
root cause of the issue, .....which we haven't
I checked the spool distribution times in transaction STAD, I have unusuallyhigh "processing times" values.
But I can't underdstand it.
Is it a network processing time ?
Our network team tell us that there is nothing abnormal, but is there a way to check from SAP , any netwok issue with the printers ?
Thanks
Edited by: Raoul Shiro on Feb 17, 2012 5:09 PM

Hi,
For log "Printer WRAL Temporarily Locked Due to Connection Problem", it means
that for a period of xxx seconds (parameter rspo/lpq/temp_disable_time) no query or printing from sap for this printer are done anymore.
This has no influence on the printout from any other application. The only effect is that the printer is 'disabled' within sap.
The idea behind this concept is to prevent that a slow query can slow down the overall print performance of one server. During the query the spool wp cannot do anything else. In this time no printout to any printer from this server can be done.
It would seem that the problem is outside of the R/3 system and is at UNIX or printer level. Perhaps you had a temporary Network or printer problem. You can test by executing the lpstat query to this printer at OS level.
You can find out the exact lpstat query that your system uses, by looking at the system parameters 'rspo/host_spool/query'.
The parameter &P in the command will be substituted by the host device name.
If everything is correct in your unix spooler then it is very likely that the printer is not working correctly, so the unix spooler can't send print jobs to this printer, Therefore SAP blocks this printer for a certain time trying not to overload the unix spool queue.
You might want to temporarily turn off the query but if there is a problem with a specific printer or OS problem, this
will not be reported back to R/3.
Some SAP notes:
385794 - Connection problems with network access methods
20924 - Parameter settings for remote printing
Regards,
Vincent

I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Change Default GR Processing Time

Hello,
In material master, MRP2 Tab: In SPRO, is it possible to change the default Goods Receipts Processing Time (WEBAZ) for every material?
If not, I may run a mass update for every existing materials. But would it be possible to make a GRP time 3 days default for new materials?
Thanks,
François

By mass processing this can be made..

Genunix: basic rctl process.max-file-descriptor (value 256) exceeded

Hi .,
I am getting the following error in my console rapidly.
I am using Sun Sparc server running with Solaris 10 ., We start getting this error
suddently after a restart of the server and the error is continously rolling on the console...
The Error:
Rebooting with command: boot
Boot device: disk0 File and args:
SunOS Release 5.10 Version Generic_118822-25 64-bit
Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hardware watchdog enabled
Failed to send email alert for recent event.
SC Alert: Failed to send email alert for recent event.
Hostname: nitwebsun01
NOTICE: VxVM vxdmp V-5-0-34 added disk array DISKS, datype = Disk
NOTICE: VxVM vxdmp V-5-3-1700 dmpnode 287/0x0 has migrated from enclosure FAKE_ENCLR_SNO to enclosure DISKS
checking ufs filesystems
/dev/rdsk/c1t0d0s4: is logging.
/dev/rdsk/c1t0d0s7: is logging.
nitwebsun01 console login: Nov 20 14:56:41 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 439
Nov 20 14:56:41 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 414
Nov 20 14:56:41 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 413
Nov 20 14:56:41 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 414
Nov 20 14:56:41 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 413
Nov 20 14:56:41 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 121
Nov 20 14:56:41 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 414
Nov 20 14:56:41 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 413
Nov 20 14:56:41 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 121
Nov 20 14:56:41 nitwebsun01 last message repeated 1 time
Nov 20 14:56:43 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 470
Nov 20 14:56:43 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 467
Nov 20 14:56:44 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 470
Nov 20 14:56:44 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 121
Nov 20 14:56:44 nitwebsun01 last message repeated 1 time
Nov 20 14:56:49 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 503
Nov 20 14:56:50 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 510
Nov 20 14:56:50 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 121
Nov 20 14:56:50 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 519
Nov 20 14:56:50 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 516
Nov 20 14:56:50 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 519
Nov 20 14:56:53 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 540
Nov 20 14:56:53 nitwebsun01 last message repeated 2 times
Nov 20 14:56:53 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 549
Nov 20 14:56:53 nitwebsun01 last message repeated 4 times
Nov 20 14:56:56 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 665
Nov 20 14:56:56 nitwebsun01 last message repeated 6 times
Nov 20 14:56:56 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 667
Nov 20 14:56:56 nitwebsun01 last message repeated 2 times
Nov 20 14:56:56 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 121
Nov 20 14:56:57 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 868
Nov 20 14:56:57 nitwebsun01 /usr/lib/snmp/snmpdx: unable to get my IP address: gethostbyname(nitwebsun01) failed [h_errno: host not found(1)]
Nov 20 14:56:58 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 887
Nov 20 14:57:00 nitwebsun01 genunix: basic rctl process.max-file-descriptor (value 256) exceeded by process 976
nitwebsun01 console login: root
Nov 20 14:57:00 nitwebsun01 last message repeated 2 times
Here I attached my /etc/project file also..
[root@nitwebsun01 /]$ cat /etc/project
system:0::::
user.root:1::::
process.max-file-descriptor=(privileged,1024,deny);
process.max-sem-ops=(privileged,512,deny);
process.max-sem-nsems=(privileged,512,deny);
project.max-sem-ids=(privileged,1024,deny);
project.max-shm-ids=(privileged,1024,deny);
project.max-shm-memory=(privileged,4294967296,deny)
noproject:2::::
default:3::::
process.max-file-descriptor=(privileged,1024,deny);
process.max-sem-ops=(privileged,512,deny);
process.max-sem-nsems=(privileged,512,deny);
project.max-sem-ids=(privileged,1024,deny);
project.max-shm-ids=(privileged,1024,deny);
project.max-shm-memory=(privileged,4294967296,deny)
group.staff:10::::
[root@nitwebsun01 /]$
Help me to came out of this issue
Regards
Suseendran .A

This is an old post but I'm going to reply to it for future reference of others.
Please ignore the first reply to this thread... by default /etc/rctladm.conf doesn't exist, and you should never use it. Just put it out of your mind.
So, then... by default, a process can have no more than 256 file descriptors open at any given time. The likelyhood that you'll have a program using more than 256 files very low... but, each network socket counts as a file descriptor, therefore many network services will exceed this limit quickly. The 256 limit is stupid but it is a standard, and as such Solaris adheres to it. To look at the open file descriptors of a given process use "pfiles <pid>".
So, to change it you have several options:
1) You can tune the default threshold on the number of descriptors by specifying a new default threshold in /etc/system:
set rlim_fd_cur=1024
2) On the shell you can view your limit using 'ulimit -n' (use 'ulimit' to see all your limit thresholds). You can set it higher for this session by supplying a value, example: 'ulimit -n 1024', then start your program. You might also put this command in a startup script before starting your program.
3) The "right" way to do this is to use a Solaris RCTL (resource control) defined in /etc/project. Say you want to give the "oracle" user 8152 fd's... you can add the following to /etc/project:
user.oracle:101::::process.max-file-descriptor=(priv,8152,deny)
Now log out the Oracle user, then log back in and startup.
You can view the limit on a process like so:
prctl -n process.max-file-descriptor -i process <pid>
In that output, you may see 3 lines, one for "basic", one for "privileged" and one for "system". System is the max possible. Privileged is the limit by which you need to have special privs to raise. Basic is the limit that you as any user can increase yourself (such as using 'ulimit' as we did above). If you define a custom "priviliged" RCTL like we did above in /etc/projects it will dump the "basic" priv which is, by default, 256.
For reference, if you need to increase the threshold of a daemon that you can not restart, you can do this "hot" by using the 'prctl' program like so:
prctl -t basic -n process.max-file-descriptor -x -i process <PID>
The above just dumps the "basic" resource control (limit) from the running process. Do that, then check it a minute later with 'pfiles' to see that its now using more FD's.
Enjoy.
benr.

[svn:fx-3.x] 10868: change default value of selectable in ASDoc comment to true

Revision: 10868
Author:   [email protected]
Date:     2009-10-05 11:05:50 -0700 (Mon, 05 Oct 2009)
Log Message:
change default value of selectable in ASDoc comment to true
QE notes: -
Doc notes: -
Bugs: -
Reviewer: -
Tests run: - checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/controls/TextArea.as

Thank you much for your response.
I tried that and it did work. But my requirement is to have a user input the date. The basic idea is if the user decides on a predefined time range like Day Shift Today or Yesterday and so on... then the report would automatically calculate the values based on predefined date time values. On the other hand, if the intent is to run the report for an arbitrary period then the user supplies the date and time limits.
What I am trying to achieve is have the same parameter available for user input , but when the User decides he wants Predefined then the "textbox" populates with date and time as per his choice of predefind range.
I understand that by this the user can still overwrite the date and time on the text box, but the report will run the predefined values as long as he has the @PredefinedDateSelection Set to true.
Is there a way I can impement this?
Once again I thank you and appreciate your input.

Defaulting Gr Processing Time in MRP2

Hi all
Can be set default to GR Processing time in SPRO or IMG, for a HAWA material for ABCD plant all the material should pick up GR processing time as 2 days be default
Regards
Niti Narayan

Hi Niti,
You can create MRP profile for default values those are required while material creation.Ensure ur selecting this MRP profile at time of material creation
Vishal...

Changing Default "Keep Alive" & " Max Processing Time" values in SMICM

Similar Messages

Maybe you are looking for