Changing the extract structure MC02M_0ITM

Hi,
When I am trying to change the extract structure MC02M_0ITM, I am getting the following error:
"struct. from appl. 02 due to open v3 proc. not changed -> Long text" , "Message No. MCEX 140". All I was doing was adding more fields from communication structure to extract structure and I am getting above error message. Can someone shed some light on that. Appreciate your help. Thanks.
Wen.

Hi Wen
You have to
1) Clear LBWQ Queues if you are using Queued delta
2) Move all records from RSA7 - two times to BW under delta update call from BW - so that the records stored for repeat delta are also emptied
3) Empty the statistical set-up table - LBWQ transaction in R/3
then you can modify the structure in LO cockpit
Arvind

Similar Messages

Unable to change the Extract structure

Hi All,
In LBWE in R/3, I need to the change the extract structure MC02M_0HDR for DataSource 2LIS_02_HDR, by including some fields using the maintenance tab, After doing the required changes when i give "continue", the system is throwing me the following error -
<b>"Struct. from appl. 02 due to open V3 proc. not changed".</b>.
The long text of the error message shows -
Diagnosis
Changing the extract structure MC02M_0HDR of application 02 is not recommended as there are no V3 update entries for the update module MCEX_UPDATE_02.
If an extract structure is changed for which there are still open V3 updates, these can no longer be updated and the V3 collective update is terminated.
Procedure
Start the V3 update and delete those update entries that are already incorrect. You will find these in the update overview.
Kindly reply me as soon as possible in this regard.
Regards,
Manickavasagan

Hello,
in transaction sm37 in the source system, you will find a job starting with LIS-BW-VB_APPLICATION*. Please select the job related to your application and in the menu Job->Delete, delte the same which is in the released state ready to be executed.
then you can go ahead and enhance the extract structure.
Hope it helps.
thanks

Error No. MCEX028 "You can not change the extraction structure" in LBWE

Hi,
I am getting this error when moving the fields from left to right...
Thanking you in advance,
Tarun Brijwani.

Hi,
Sorry for the wrong information..
Actually the error is "Struct. from appl. 02 due to open V3 proc. not changed -> Long text"
Data source name: 2lis_02_itm(unserialised v3 update)
1.tcode LBWG and deleted the set up tables for application 02
2..I went in rsa7(delta queue) but there are no entries in that queue...
it is absolutely empty...
2.I went in sm13 and put the client (all), user(all), and status radio button as 'all' and date as 01.01.2004 to current date,
some entries were displayed but for all of them, in the status column is "v2 processed" being displayed
and some of them are using synchronous update adjacent to which STOP tatoo is displayed
What do I do now..
Thanking you,
Tarun Brijwani.

Error while enhancing the Extract structure in LBWE

Hi All,
When I am trying to change the extract structure os logistic extractors in LBWE, it is giving me an error saying "Entries for application 11 still exist in the extraction queue".
Below is my scenario:
I have 3 clients in the same R/3 system, Client 010, 020 and 030.
Clients 020 and 030 are connected to my BW system. Client 010 will be used for all development while test loads can be done from clients either 020 or 030. Till now, I have tested my data flows only from client 030. Now, I have to add some extra field to the structure in LBWE but facing the above mentioned error.
I went into LBWQ in both the client 020 and 030 and deleted the queue and then tried to change the extract structure in client 010 but still the same error.
What else do I need to do to resolve this?
Thanks,
RPK.

Hi Raki,
We are still in development phase. I did all my developments(R/3) in client 010. Till now I did only full loads to BW from client 030 and haven't done any loads from client 020. My BW system is also connected to another sandbox client 100 but I haven't done any loads from that client aswell.
As I have to add some extra fields to the extractor from LBWE, I did the follwing steps in R/3:
1) I have deleted the setup tables from client 010, 020 and 030.
2) Deleted the data from LBWQ from clients 010, 020 and 030.
3) Trying to change the extract structure by clicking on "Maintenance" for the extractor in Client 010.
At this point it is throwing an error.
I thought that the client 100 might be a problem as I have transfer rules created in my BW system from this source system as well. As I do not need this source system anymore, I have deleted it from BW and tried changing the structure in LBWE but still the same problem.
Any ideas would be highly appreciated.
Thanks,
RPK.

Change to Extract Structure Doubt

Hi,
Our Basis Folks are trying to install Patch 6 ST-PI 2005_1_700 in ECC. I refered to OSS Note 328181.
For this Patch do we need to delete the Set up Table and Fill it again? And How about Init Delta in BW?
Please suggest me. Any answers will be appreciated with Points.
Kind Regards
Mahesh.N

Hello,
Yes you have to delete the Setup table data before that as per the OSS Note you have to clear the delta queue data which cannot be recovered after changing the extract structure. So execute the BW Delta Infopackages and make sure there is no delta records in RSA7 or LBWQ.
Then you can delete the setup table using LBWG and implement the patch.
1. Make sure that the following steps are carried out at a time when no updates are performed so that no data is lost.
2. Start the update collective run directly from within the Customizing Cockpit. Up to PI(-A) 2001.2 , this collective run exclusively concerns the V3 update. As of PI(-A) 2002.1, depending on the update mode setting of the application, the collective run concerns either the V3 update or the update from the extraction queue ("Delta Queued", see Note 505700).
3. Load all data of the respective DataSource into the BW System.
Now you can make the change.
After a change you can no longer use the statistical data already recreated. If such data still exists, you should delete it (Transaction LBWG).
We recommend in particular to upload the data immediately after a restructuring and (after checking in BW) delete them from the restructuring tables.
Moreover, the update log (Transaction LBWF) can no longer be read. Post a document in this case so that the last log entry is overwritten. This log entry then has the correct new format of the extract structure.
As of PI 2000.2 the program RMCEXDELETELOG is available. It can be used to delete log entries.
But if there is any change in lenght of any field of the extract structure, then you have to reload the entire data again in BW otherwise a Init without data transfer will do.
But what is the patch all about? Please follow the instruction given in the OSS Note 328181 - Changes to extract structures in Customizing Cockpit.
Thanks
Chandran

Change an extract-structure in an existing datasource

Hello,
I want to change an extract-structure in an existing datasource (0COORDER_TEXT), but I don't know how to do.
(I first thought I can do it with trx RSA6.)
Can anybody give me a hint how to change the extract-structure?
Kind regards
Udo

Hi,
yes, you can change an extract-structure in an existing datasource . The enhancemet of DataSource is the process of enhancing your extract structures by creating an append with your ZZ/YY fields and filling these fields using a specific user exits. Then you have to fill those fields with some ABAP custom code that can be anything from some simple calculations or table lookups to complex business logic requiring access to multiple database tables. You can do that by CMOD, creating a project and using the enhancement:RSAP0001.
You have to follow bellow steps:
1. Go to RSA6.
2. Select the Data Source.
3. Select display Data Source (Ctr+F2).
4. Double click on the Extract structure.
5. Click on the Append Structure.
6. Add the required field .
7. Activate the Append Structure.
8. Go to CMOD.Give the Project, select Display.
9. Click on ZXRSAU01.
10.you have the bellow exits:
    a).Transaction data: EXIT_SAPLRSAP_001
    b).Master data attributes: EXIT_SAPLRSAP_002
    c).Master data texts: EXIT_SAPLRSAP_003
    d).Master data hierarchies: EXIT_SAPLRSAP_004
11. select Transaction Data EXIT,then you have to write the ABAP CODE
12. save and activate.
13. check the data in RSA3.
These steps will help you.
Regards,
Suman.

Change the Domain of a data elements in the extraction structure

Hi experts
I was transport a extraction structure from BW DEV to BW QA System, but in STMS of QA System generated an error "Active ABAP Dictionary" then in T-code SE11 -> visualize -> Components Tab i am watching that the Data Type of a component ZBITRST is QUAN whereas in BW DEV system the Data Type is CHAR which is correct
by double-clicking the component I am watching that the domain of both is different, How I can change the domain in QA System / BIC/VQUAN_000013_000003 to / BIC/VCHAR_000003_000000?
or What is the solution to this problem?
Thanks

Hi
As you told you have correct domain for the info object in DEV system, transport this single info object through one transport.
now check whether domain of the info the info object is correct.
now you can import the extraction structure.
If you want to change the domain type, goto edit mode of info object and select the data type CHAR instead of UNIT and activate the info object. this will change the domain type of your Info Object.
Regards,
Venkatesh

Changes in extract structure

Hello All,
The extract structure for 2lis_11_vaitm has been changed and since then whenever I try to execute the datasource using RSA3.
I get an error Import_mismatch_error.
The extractor was working fine in dev. So I collected one structure which was missing in quality.
After releasing the same in quality, I deleted the setup tables and did run RSA3 - I got 0 records.
As per the SAP note 328181 - the old Sales orders are not compatible with the new structure and so we get the same error.
If any new documents are posted they will come in RSA3. How do I make sure that in Production I dont miss any data?
Regards,
Nikekab

Hello Venkat,
I found one error description though:
Error when resetting DataSource 2LIS_11_VAITM OKQCLNT332 to the active version
Message no. RSO410
Diagnosis
Errors arose when activating DataSource 2LIS_11_VAITM. An active version already existed before theactivation.
System Response
DataSource 2LIS_11_VAITM could not be resetto the old active version. Since the generated objects no longer correspond to the old active version, they were reset to inactive.
Procedure
The old active version of DataSource 2LIS_11_VAITMcan no longer be used. Remove the cause ofthe activation error and activate DataSource 2LIS_11_VAITM anew.
Regards,
NIKEKAB

Enhancing the extract structure for 0FI_GL_4, 0FI_AP_4, 0FI_AR_4

Hi all,
      Does anyone know how to enhance the extraction structures with additional fields for datasources 0FI_GL_4 (General ledger: line item), 0FI_AP_4 (vendors: line item) and 0FI_AR_4 (customers: line item).
Thanks,
Sabrina.

Hi
    Here are the two scenario's described in the note:
1. All the fields of the customer enhancement in the customer include are contained in the read structure (see the table above). Then no additional action is required. The fields of the customer enhancement are filled automatically by the datasource from the assigned read structure via "move-corresponding".
Example:   The extraction structure DTFIGL_4 for datasource 0FI_GL_4 (General ledger: line item) should be enhanced by the VALUT (value date) field.
           To do this, create structure CI_BSIS in the data dictionary of the R/3 source system and include the VALUT field in it. The data dictionary in the R/3 source system shows that the VALUT field is contained in the read structure of the datasource (table BSIS). For that reason the VALUT field is automatically filled by datasource 0FI_GL_4.
2. Fields of the customer enhancement in the customer include are not contained in the read structure (see the table above). In this case you have to program a function module to fill the field of the customer enhancement. To do this, there is a Business Transaction Event available (open FI interface for process 00005021). Create any function module you like and use function module SAMPLE_PROCESS_00005021 as a template for the interface (input parameter, changing parameter).
           Interface of function module SAMPLE_PROCESS_00005021:
            Input-parameter I_OLTPSOURCE: datasource that is currently extracting data from the R/3 source system.
            Changing-Parameter C_STRUCTURE: Extraction structure of the data source currently extracting including fields from the assigned customer include. When you call this customer defined function module, all the fields of the extract structure are transferred filled.
           Check whether the type pool SBIWA is declared in the TOP include of the function group.
If not, add it with the statement TYPE-POOLS: SBIWA.
           Then maintain table TPS31 with Transaction SM30. Create the following entry:
           PROCS LAND APPLK FUNCT
           00005021 <fname>
           <fname> stands for the customer defined function module.
            By doing so, the function module you defined is called for each extracted record. Note that in this case the performance of the extraction may be reduced significantly regardless of the table read and the complexity of the programmed logic.
           Example:
           You want to enhance the extraction structure DTFIAR_3 for datasource 0FI_AR_4 (customers: line item) by the ORT01 (city) field from the customer master record.
            To do this, create structure CI_BSID in data dictionary of the R/3 source system and include the ORT01 field in that. The data dictionary in the R/3 source system displays that the ORT01 field is NOT contained in the read structure of datasource 0FI_AR_4 (Table BSID).
            Therefore you have to program a function module that reads the customer master in the R/3 system (table KANN1) and fills the ORT01 field of the customer enhancement. In the changing parameter C_STRUCTURE the filled fields of the extraction structure DTFIAR_3 are available to you. With the KUNNR field of extraction structure DTFIAR_3, you can select the respective master data record from table KNA1 and determine field ORT01 of the customer enhancement.
1. All the fields of the customer enhancement in the customer include are contained in the read structure (see the table above).
           Then no additional action is required. The fields of the customer enhancement are filled automatically by the datasource from the assigned read structure via "move-corresponding".
           Example:
           The extraction structure DTFIGL_4 for datasource 0FI_GL_4 (General ledger: line item) should be enhanced by the VALUT (value date) field.
           To do this, create structure CI_BSIS in the data dictionary of the R/3 source system and include the VALUT field in it. The data dictionary in the R/3 source system shows that the VALUT field is contained in the read structure of the datasource (table BSIS). For that reason the VALUT field is automatically filled by datasource 0FI_GL_4.
           ATTENTION:
           By using Note 430303 you can enhance DataSource 0FI_GL_4 by all fields from table BSEG (instead of BSIS); then the fields are filled automatically in the extractor.
1. Fields of the customer enhancement in the customer include are not contained in the read structure (see the table above).
            In this case you have to program a function module to fill the field of the customer enhancement. To do this, there is a Business Transaction Event available (open FI interface for process 00005021). Create any function module you like and use function module SAMPLE_PROCESS_00005021 as a template for the interface (input parameter, changing parameter).
           Interface of function module SAMPLE_PROCESS_00005021:
            Input-parameter I_OLTPSOURCE: datasource that is currently extracting data from the R/3 source system.
            Changing-Parameter C_STRUCTURE: Extraction structure of the data source currently extracting including fields from the assigned customer include. When you call this customer defined function module, all the fields of the extract structure are transferred filled.
           Check whether the type pool SBIWA is declared in the TOP include of the function group.
If not, add it with the statement TYPE-POOLS: SBIWA.
           Then maintain table TPS31 with Transaction SM30. Create the following entry:
           PROCS LAND APPLK FUNCT
           00005021 <fname>
           <fname> stands for the customer defined function module.
            By doing so, the function module you defined is called for each extracted record. Note that in this case the performance of the extraction may be reduced significantly regardless of the table read and the complexity of the programmed logic.
           Example:
           You want to enhance the extraction structure DTFIAR_3 for datasource 0FI_AR_4 (customers: line item) by the ORT01 (city) field from the customer master record.
            To do this, create structure CI_BSID in data dictionary of the R/3 source system and include the ORT01 field in that. The data dictionary in the R/3 source system displays that the ORT01 field is NOT contained in the read structure of datasource 0FI_AR_4 (Table BSID).
            Therefore you have to program a function module that reads the customer master in the R/3 system (table KANN1) and fills the ORT01 field of the customer enhancement. In the changing parameter C_STRUCTURE the filled fields of the extraction structure DTFIAR_3 are available to you. With the KUNNR field of extraction structure DTFIAR_3, you can select the respective master data record from table KNA1 and determine field ORT01 of the customer enhancement.
After you create the customer include in the R/3 source system you have to post process the accompanying datasource with Transaction RSA6. Select the application component according to the above table and change the datasource that fits the customer include. The "Hide fields" flag should be removed in the field list for the fields of the customer include. Then save the field list.
If the fields of the customer include is not displayed in Transaction RSA6, refer to note 415530.
1. After you create the customer include in the R/3 source system you have to post process the accompanying datasource with Transaction RSA6. Select the application component according to the above table and change the datasource that fits the customer include. The "Hide fields" flag should be removed in the field list for the fields of the customer include. Then save the field list.
If the fields of the customer include is not displayed in Transaction RSA6, refer to note 415530.
Please let me know.
Thanks,
Sabrina.

Change the extractor structure in standard extractors?

Hi, is it possible (and wise) to change the standard extraction structure on the standard extractors?

Hi Rune,
Yes you can change the standard extract structure for the standard datasources.You can write a code for enhancing extract structure in CMOD and you can add fields to the standard extract structure.For LO datasources you can customize the extract structure as well.You can do it in Extractor maintainance and add fields from pool to extract structure.
Hope this clears
Regards
Karthik

How to change the default structure when exporting data in CSV format?

Hello,
can some one tell us how to change the default structure in CRM when exporting lists in CSV format (with Option "Always use unformatted list format (CSV) for download" ? Because we want to add a new structure for our own -is it possible ?
If it is possible where can we find these structure ? In the blueprint customizing ?
Thank you very much,
Christian

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

How to restrict the user to change the project structure but not the documents?

Hi,
I have created one project assigning different users in Solution manger. I want to risitrict some of the users to change the project structure but simultaneously allwoing the project documents to be created, edited or deleted using solar01 under Project documentation tab. For that I have followed the steps provided in the follwoing link.
http://wiki.scn.sap.com/wiki/display/SM/Howto+Restrict+Changes+to+Project+Nodes+to+Assigned+Team+Members
I am able to restrict the users to change the project structure, but I am not able to allow access to the project documents. It gives me the message "You are not authorised to change the project". This fulfills my one of the requirements. But, Is there any way to restrict the user to change the project structure but not the documents?. Any help will be apperitiated.
Thanks,
Rutvik Uapdhyay.

Hi Rutvik,
Basically there are 2 different authorization role ...you should look for and customize as per requirement in Z* namespace.
role - SAP_SOLAR01_ALL
this take care of objects in Solar01 like tab access etc
role -SAP_SOL_KW_ALL
this takes care of entire documentation within solman
hope this helps
Regards
Prakhar

Problem in populating the new field from the extract structure. Kindly help

my requirement a new text field is added on R/3 side and I have to populate
the same field into BW.
In the R/3 a new customization table 'AAA' is created which will have
code - char 3 and
text - char 30.
The code field is added to a table BBB.
The SAP standard generic data source exracts data from the table BBB where in the new code field have been added.
Now I can the see the code field in the extract structure and not in the data source as the filed has selection value 'A' when checked in the ROOSFIELD table.
To populate the value in BW, I will be creating a Generic Master Data text wherein I fetch the values from the table 'AAA' which the fields code and text and replicate the same in BW.
In the reporting level, the code InfoObject will be selected as display both KEY and TeXT, by doing I can populate the values of TEXT in the reporting.
But to achieve the same I need to add the field code in the ODS but cannot do the same because I am not able to see the field code in the data source.
Kindly let me know how to achieve the same.
Also let me know if there is any alternate solution to populate the text field in BW.
Any Inputs will be appreciated.
Thanks

> You should get the userdatasources bound to the
> columns and assign the values of the recordset to
> each one and after that use "setLineData" to write in
> the matrix.
>
> hope it helps
Hi all,
i have created tables (non BO Tables) directly on the SQL-server and want to use recordset to populate a user form matrix.
Is there any workaround to achieve this using non BO tables?
Please provide some sample code since it is a very urgent matter.
regards
Daniel

Need help in ABAP code to Enhance the Extract Structure ?????

Hi all,
    I want to enhance the extract structure to get KBETR & KBRUE fields of KONP table since it didnt allow me to add those fields while creating the generic extractor because of currency key problems. I want to read all KONP records into internal table with KNUMH (Key). Next, I want to fill them into ZZKBETR & ZZKBRUE of Extract Structure ZOXUR40065 in loop.
DATA:
i_t_zrebate like ZOXUR40065 occurs 0 with header line,
reb_tabix like sy-tabix.
TABLES: KONP.
Could you please help me in completing the ABAP code?
Thanks,
Venkat.

Hello Manga,
    I have included the following code in ZXRSAU01:
WHEN 'ZREBATE'.
PERFORM ZREBATE_EXIT TABLES C_T_DATA.
After Double click on ZREBATE_EXIT on perform statement, it created ZXRSAF01 include and the following code is added in it:
FORM ZREBATE_EXIT TABLES FP_C_T_DATA STRUCTURE ZOXUR40065.
DATA:
i_t_zrebate like ZOXUR40065 occurs 0 with header line,
reb_tabix like sy-tabix.
FIELD-SYMBOLS: <l_c_t_data> TYPE ZOXUR40065.
LOOP AT fp_c_t_data ASSIGNING <l_c_t_data>.
reb_tabix = sy-tabix.
select single KBETR KBRUE
into (<l_c_t_data>-ZZKBETR,
<l_c_t_data>-ZZKBRUE,
from KONP
where KNUMH eq <l_c_t_data>-KNUMH.
if sy-subrc eq 0.
MODIFY fp_c_t_data FROM <l_c_t_data> INDEX reb_tabix.
endif.
CLEAR:reb_tabix.
ENDLOOP.
ENDFORM.
When I tried to Activate this ZXRSAF01 include, it fails with 'The FORM "ZREBATE_EXIT" does not exist'.
Should it be FP_C_T or P_C_T? I found P_C_T in ZXRSAF01 include.
What is wrong with it, please ?
   Can't I add this whole code in main include ZXRSAU01itself?
The Extractor ZREBATE is based on KONA, KONH & KONP tables. This Extractor and KONA table have the same 4000 records and KONP has 13000 records. I want to extract KBERT & KBRUE from KONP.
   Thanks in advance.
Regards,
Venkat

Changing the directory Structure of Jsp and web.xml files

Hi,
I am using the JDeveloper 11g preview. Can any one tell me how to change the Jsp and web.xml files ( not in WEB-INF directory of the application) to another directory.
Thanks in Advance
Gopal

Hi Frank,
Is it possible for me to change the folder structure which JDeveloper is providing for web project?
By default JDeveloper is giving the following folder structure.
In the project's root folder there is a public_html and src folder along with .jpr file.
In public_html folder thre is an WEB-INF folder and a jsp file
In WEB-INF folder there is an classes folder along with web.xml file.
I need to have the following folder structure :
The WEB-INF folder should be in root folder of project not in public_html folder
src folder must be in WEB-INF folder.
Thanks in Advance
Anil Golla

Changing the extract structure MC02M_0ITM

Similar Messages

Maybe you are looking for